Merge branch 'next' into for-linus

Prepare input updates for 5.17 merge window.

Merge branch 'reset/of-get-optional-exclusive' of git://git.pengutronix.de/pza/linux into timers/drivers/next

"Add optional variant of of_reset_control_get_exclusive(). If the
requested reset is not

Merge branch 'reset/of-get-optional-exclusive' of git://git.pengutronix.de/pza/linux into timers/drivers/next

"Add optional variant of of_reset_control_get_exclusive(). If the
requested reset is not specified in the device tree, this function
returns NULL instead of an error."

This dependency is needed for the Generic Timer Module (a.k.a OSTM)
support for RZ/G2L.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

show more ...

Merge tag 'v5.15' into next

Sync up with the mainline to get the latest APIs and DT bindings.

Merge branch 'pruss-fix' into fixes

Merge in a fix for pruss reset issue caused by enabling pruss for am335x.

Merge tag 'v5.15-rc2' into spi-5.15

Linux 5.15-rc2

Merge drm/drm-next into drm-intel-next

Catch-up on 5.15-rc1 and sync with drm-intel-gt-next
to prepare the PXP topic branch.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-intel-gt-next

Close the divergence which has caused patches not to apply and
have a solid baseline for the PXP patches that Rodrigo will send
a topic branch PR for.

Sign

Merge drm/drm-next into drm-intel-gt-next

Close the divergence which has caused patches not to apply and
have a solid baseline for the PXP patches that Rodrigo will send
a topic branch PR for.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Kickstart new drm-misc-next cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge branch 'linus' into smp/urgent

Ensure that all usage sites of get/put_online_cpus() except for the
struggler in drivers/thermal are gone. So the last user and the deprecated
inlines can be rem

Merge branch 'linus' into smp/urgent

Ensure that all usage sites of get/put_online_cpus() except for the
struggler in drivers/thermal are gone. So the last user and the deprecated
inlines can be removed.

show more ...

Merge branch 'siginfo-si_trapno-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull siginfo si_trapno updates from Eric Biederman:
"The full set of si_trapno ch

Merge branch 'siginfo-si_trapno-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull siginfo si_trapno updates from Eric Biederman:
"The full set of si_trapno changes was not appropriate as a fix for the
newly added SIGTRAP TRAP_PERF, and so I postponed the rest of the
related cleanups.

This is the rest of the cleanups for si_trapno that reduces it from
being a really weird arch special case that is expect to be always
present (but isn't) on the architectures that support it to being yet
another field in the _sigfault union of struct siginfo.

The changes have been reviewed and marinated in linux-next. With the
removal of this awkward special case new code (like SIGTRAP TRAP_PERF)
that works across architectures should be easier to write and
maintain"

* 'siginfo-si_trapno-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signal: Rename SIL_PERF_EVENT SIL_FAULT_PERF_EVENT for consistency
signal: Verify the alignment and size of siginfo_t
signal: Remove the generic __ARCH_SI_TRAPNO support
signal/alpha: si_trapno is only used with SIGFPE and SIGTRAP TRAP_UNK
signal/sparc: si_trapno is only used with SIGILL ILL_ILLTRP
arm64: Add compile-time asserts for siginfo_t offsets
arm: Add compile-time asserts for siginfo_t offsets
sparc64: Add compile-time asserts for siginfo_t offsets

show more ...

Final si_trapno bits

As a part of a fix for the ABI of the newly added SIGTRAP TRAP_PERF a
si_trapno was reduced to an ordinary extention of the _sigfault case
of struct siginfo.

When Linus saw the

Final si_trapno bits

As a part of a fix for the ABI of the newly added SIGTRAP TRAP_PERF a
si_trapno was reduced to an ordinary extention of the _sigfault case
of struct siginfo.

When Linus saw the complete set of changes come in as a fix he requested
that the set of changes be trimmed down to just what was necessary to
fix the SIGTRAP TRAP_PERF ABI.

I had intended to get the rest of the changes into the merge window for
v5.14 but I dropped the ball.

I have made the changes to stop using __ARCH_SI_TRAPNO be per
architecture so they are easier to review. In doing so I found one
place on alpha where I used send_sig_fault instead of
send_sig_fault_trapno(... si_trapno = 0). That would not have changed
the userspace behavior but it did make the kernel code less clear.

My rule in these patches is everywhere that siginfo layout calls
for SIL_FAULT_TRAPNO the code uses either force_sig_fault_trapno
or send_sig_fault_trapno.

And of course I have rebased and compile tested Marco's compile time
assert patches.

v1: https://lkml.kernel.org/r/m1zgxfs7zq.fsf_-_@fess.ebiederm.org
v2: https://lkml.kernel.org/r/m14kfjh8et.fsf_-_@fess.ebiederm.org
v3: https://lkml.kernel.org/r/m1tuni8ano.fsf_-_@fess.ebiederm.org
v4: https://lkml.kernel.org/r/m1a6ot5e2h.fsf_-_@fess.ebiederm.org
Link: https://lkml.kernel.org/r/87a6mnzbx2.fsf_-_@disp2133

Eric W. Biederman (5):
signal/sparc: si_trapno is only used with SIGILL ILL_ILLTRP
signal/alpha: si_trapno is only used with SIGFPE and SIGTRAP TRAP_UNK
signal: Remove the generic __ARCH_SI_TRAPNO support
signal: Verify the alignment and size of siginfo_t
signal: Rename SIL_PERF_EVENT SIL_FAULT_PERF_EVENT for consistency

Marco Elver (3):
sparc64: Add compile-time asserts for siginfo_t offsets
arm: Add compile-time asserts for siginfo_t offsets
arm64: Add compile-time asserts for siginfo_t offsets

arch/alpha/include/uapi/asm/siginfo.h | 2 --
arch/alpha/kernel/osf_sys.c | 2 +-
arch/alpha/kernel/signal.c | 4 +--
arch/alpha/kernel/traps.c | 26 +++++++--------
arch/alpha/mm/fault.c | 4 +--
arch/arm/kernel/signal.c | 39 ++++++++++++++++++++++
arch/arm64/kernel/signal.c | 39 ++++++++++++++++++++++
arch/arm64/kernel/signal32.c | 39 ++++++++++++++++++++++
arch/mips/include/uapi/asm/siginfo.h | 2 --
arch/sparc/include/uapi/asm/siginfo.h | 3 --
arch/sparc/kernel/process_64.c | 2 +-
arch/sparc/kernel/signal32.c | 37 +++++++++++++++++++++
arch/sparc/kernel/signal_64.c | 36 ++++++++++++++++++++
arch/sparc/kernel/sys_sparc_32.c | 2 +-
arch/sparc/kernel/sys_sparc_64.c | 2 +-
arch/sparc/kernel/traps_32.c | 22 ++++++-------
arch/sparc/kernel/traps_64.c | 44 +++++++++++--------------
arch/sparc/kernel/unaligned_32.c | 2 +-
arch/sparc/mm/fault_32.c | 2 +-
arch/sparc/mm/fault_64.c | 2 +-
arch/x86/kernel/signal_compat.c | 6 ++++
fs/signalfd.c | 4 +--
include/linux/sched/signal.h | 11 ++-----
include/linux/signal.h | 2 +-
include/uapi/asm-generic/siginfo.h | 5 +++
kernel/signal.c | 62 +++++++++++++++++++++++++----------
26 files changed, 305 insertions(+), 96 deletions(-)

show more ...

signal/sparc: si_trapno is only used with SIGILL ILL_ILLTRP

While reviewing the signal handlers on sparc it became clear that
si_trapno is only set to a non-zero value when sending SIGILL with
si_co

signal/sparc: si_trapno is only used with SIGILL ILL_ILLTRP

While reviewing the signal handlers on sparc it became clear that
si_trapno is only set to a non-zero value when sending SIGILL with
si_code ILL_ILLTRP.

Add force_sig_fault_trapno and send SIGILL ILL_ILLTRP with it.

Remove the define of __ARCH_SI_TRAPNO and remove the always zero
si_trapno parameter from send_sig_fault and force_sig_fault.

v1: https://lkml.kernel.org/r/m1eeers7q7.fsf_-_@fess.ebiederm.org
v2: https://lkml.kernel.org/r/20210505141101.11519-7-ebiederm@xmission.com
Link: https://lkml.kernel.org/r/87mtqnxx89.fsf_-_@disp2133
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

show more ...

Merge tag 'v5.13-rc2' into spi-5.13

Linux 5.13-rc2

Merge branch 'fixes-rc1' into fixes

Merge branch 'next' into for-linus

Prepare input updates for 5.13 merge window.

Merge tag 'v5.12-rc8' into sched/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'v5.12-rc7' into ecryptfs/next

Required to pick up idmapped mount changes which changed some function
parameters.

Merge tags 'ib-mfd-clk-gpio-regulator-rtc-v5.13', 'ib-mfd-extcon-v5.13', 'ib-mfd-input-v5.13-1', 'ib-mfd-platform-x86-v5.13', 'ib-mfd-power-v5.13', 'ib-mfd-pwm-rtc-v5.13-1' and 'ib-regulator-list-ram

Merge tags 'ib-mfd-clk-gpio-regulator-rtc-v5.13', 'ib-mfd-extcon-v5.13', 'ib-mfd-input-v5.13-1', 'ib-mfd-platform-x86-v5.13', 'ib-mfd-power-v5.13', 'ib-mfd-pwm-rtc-v5.13-1' and 'ib-regulator-list-ramp-helpers-v5.13' into ibs-for-mfd-merged

Immutable branch between MFD, Clock, GPIO, Regulator and RTC due for the v5.13 merge window

Immutable branch between MFD and Extcon due for the v5.13 merge window

Immutable branch between MFD and Input due for the v5.13 merge window

Immutable branch between MFD and Platform/x86 due for the v5.13 merge window

Immutable branch between MFD and Power due for the v5.13 merge window

Immutable branch between MFD, PWM and RTC due for the v5.13 merge window

show more ...

Merge drm/drm-next into drm-intel-next

Sync up with topic/i915-gem-next and drm-intel-gt-next.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge series "Support ROHM BD71815 PMIC" from Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>:

Patch series introducing support for ROHM BD71815 PMIC

ROHM BD71815 is a power management IC used

Merge series "Support ROHM BD71815 PMIC" from Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>:

Patch series introducing support for ROHM BD71815 PMIC

ROHM BD71815 is a power management IC used in some battery powered
systems. It contains regulators, GPO(s), charger + coulomb counter, RTC
and a clock gate.

All regulators can be controlled via I2C. LDO4 can additionally be set to
be enabled/disabled by a GPIO. LDO3 voltage could be selected from two
voltages written into separate VSEL reisters using GPIO but this mode is
not supported by driver. On top of that the PMIC has the typical HW
state machine which is present also on many other ROHM PMICs.

IC contains two GPOs - but one of the GPOs is marked as GND in
data-sheet. Thus the driver by default only exposes one GPO. The second
GPO can be enabled by special DT property.

RTC is almost similar to what is on BD71828. For currently used features
only the register address offset to RTC block differs.

The charger driver is not included in this series. ROHM has a charger
driver with some fuel-gauging logig written in but this is not included
here. I am working on separating the logic from HW specific driver and
supporting both BD71815 and BD71828 chargers in separate patch series.

Changelog v5:
Regulator:
- Added regmap helper for regulator ramp-delay and taken it in use
(patches 13, 14, 16 - they can be just dropped if ramp-delay helper is not
a good idea. Patch 15 implements old-fashioned ramp-delay)
GPIO:
- styling changes to GPIO (Mostly suggested by Andy)
- implemented init_valid_mask (but can't count on it yet)
Changelog v4:
- Sorted ROHM chip ID enum
- Statcized DVS structures in regulator driver
- Minor styling for regulator driver
- rebased on v5.12-rc4
Changelog v3:
- GPIO clean-up as suggested by Bartosz
- MFD clean-up as suggested by Lee
- clk-mode dt-binding handling in MFD driver corrected to reflect new
property values.
- Dropped already applied patches
- Rebased on v5.12-rc2
Changelog v2:
- Rebased on top of v5.11-rc3
- Added another "preliminary patch" which fixes HW-dvs voltage
handling (patch 1)
- split regulator patch to two.
- changed dt-binding patch ordering.
regulators:
- staticized probe
- removed some unnecessary defines
- updated comments
- split rohm-regulator patch adding SNVS and supporting simple
linear mapping into two - one adding support for mapping, other
adding SNVS.
GPIO:
- removed unnecessary headers
- clarified dev/parent->dev usage
- removed forgotten #define DEBUG
dt-bindings:
- changed patch order to meet ref-dependencies
- added missing regulator nodes
- changed string property for clk mode to tristated
MFD:
- header cleanups.
CLK:
- fixed commit message

--

Matti Vaittinen (19):
rtc: bd70528: Do not require parent data
mfd: bd718x7: simplify by cleaning unnecessary device data
dt_bindings: bd71828: Add clock output mode
dt_bindings: regulator: Add ROHM BD71815 PMIC regulators
dt_bindings: mfd: Add ROHM BD71815 PMIC
mfd: Add ROHM BD71815 ID
mfd: Sort ROHM chip ID list for better readability
mfd: Support for ROHM BD71815 PMIC core
gpio: support ROHM BD71815 GPOs
regulator: helpers: Export helper voltage listing
regulator: rohm-regulator: linear voltage support
regulator: rohm-regulator: Support SNVS HW state.
regulator: Add regmap helper for ramp-delay setting
regulator: bd718x7, bd71828: Use ramp-delay helper
regulator: Support ROHM BD71815 regulators
regulator: bd71815: use ramp-delay helper
clk: bd718x7: Add support for clk gate on ROHM BD71815 PMIC
rtc: bd70528: Support RTC on ROHM BD71815
MAINTAINERS: Add ROHM BD71815AGW

.../bindings/mfd/rohm,bd71815-pmic.yaml | 201 ++++++
.../bindings/mfd/rohm,bd71828-pmic.yaml | 6 +
.../regulator/rohm,bd71815-regulator.yaml | 116 ++++
MAINTAINERS | 3 +
drivers/clk/clk-bd718x7.c | 9 +-
drivers/gpio/Kconfig | 10 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-bd71815.c | 193 ++++++
drivers/mfd/Kconfig | 15 +-
drivers/mfd/rohm-bd71828.c | 486 +++++++++----
drivers/mfd/rohm-bd718x7.c | 43 +-
drivers/regulator/Kconfig | 11 +
drivers/regulator/Makefile | 1 +
drivers/regulator/bd71815-regulator.c | 651 ++++++++++++++++++
drivers/regulator/bd71828-regulator.c | 51 +-
drivers/regulator/bd718x7-regulator.c | 60 +-
drivers/regulator/helpers.c | 101 ++-
drivers/regulator/rohm-regulator.c | 23 +-
drivers/rtc/Kconfig | 6 +-
drivers/rtc/rtc-bd70528.c | 104 +--
include/linux/mfd/rohm-bd71815.h | 562 +++++++++++++++
include/linux/mfd/rohm-bd71828.h | 3 +
include/linux/mfd/rohm-bd718x7.h | 13 -
include/linux/mfd/rohm-generic.h | 15 +-
include/linux/regulator/driver.h | 7 +
25 files changed, 2393 insertions(+), 298 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml
create mode 100644 drivers/gpio/gpio-bd71815.c
create mode 100644 drivers/regulator/bd71815-regulator.c
create mode 100644 include/linux/mfd/rohm-bd71815.h

base-commit: 0d02ec6b3136c73c09e7859f0d0e4e2c4c07b49b
--
2.25.4

--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]

show more ...

Merge tag 'mute-led-rework' of https://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into asoc-5.13

ALSA: control - add generic LED API

This patchset tries to resolve the diversity in the aud

Merge tag 'mute-led-rework' of https://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into asoc-5.13

ALSA: control - add generic LED API

This patchset tries to resolve the diversity in the audio LED
control among the ALSA drivers. A new control layer registration
is introduced which allows to run additional operations on
top of the elementary ALSA sound controls.

A new control access group (three bits in the access flags)
was introduced to carry the LED group information for
the sound controls. The low-level sound drivers can just
mark those controls using this access group. This information
is not exported to the user space, but user space can
manage the LED sound control associations through sysfs
(last patch) per Mark's request. It makes things fully
configurable in the kernel and user space (UCM).

The actual state ('route') evaluation is really easy
(the minimal value check for all channels / controls / cards).
If there's more complicated logic for a given hardware,
the card driver may eventually export a new read-only
sound control for the LED group and do the logic itself.

The new LED trigger control code is completely separated
and possibly optional (there's no symbol dependency).
The full code separation allows eventually to move this
LED trigger control to the user space in future.
Actually it replaces the already present functionality
in the kernel space (HDA drivers) and allows a quick adoption
for the recent hardware (ASoC codecs including SoundWire).

snd_ctl_led 24576 0

The sound driver implementation is really easy:

1) call snd_ctl_led_request() when control LED layer should be
automatically activated
/ it calls module_request("snd-ctl-led") on demand /
2) mark all related kcontrols with
SNDRV_CTL_ELEM_ACCESS_SPK_LED or
SNDRV_CTL_ELEM_ACCESS_MIC_LED

Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

Merge tag 'tags/mute-led-rework' into for-next

ALSA: control - add generic LED API

This patchset tries to resolve the diversity in the audio LED
control among the ALSA drivers. A new control layer

Merge tag 'tags/mute-led-rework' into for-next

ALSA: control - add generic LED API

This patchset tries to resolve the diversity in the audio LED
control among the ALSA drivers. A new control layer registration
is introduced which allows to run additional operations on
top of the elementary ALSA sound controls.

A new control access group (three bits in the access flags)
was introduced to carry the LED group information for
the sound controls. The low-level sound drivers can just
mark those controls using this access group. This information
is not exported to the user space, but user space can
manage the LED sound control associations through sysfs
(last patch) per Mark's request. It makes things fully
configurable in the kernel and user space (UCM).

The actual state ('route') evaluation is really easy
(the minimal value check for all channels / controls / cards).
If there's more complicated logic for a given hardware,
the card driver may eventually export a new read-only
sound control for the LED group and do the logic itself.

The new LED trigger control code is completely separated
and possibly optional (there's no symbol dependency).
The full code separation allows eventually to move this
LED trigger control to the user space in future.
Actually it replaces the already present functionality
in the kernel space (HDA drivers) and allows a quick adoption
for the recent hardware (ASoC codecs including SoundWire).

snd_ctl_led 24576 0

The sound driver implementation is really easy:

1) call snd_ctl_led_request() when control LED layer should be
automatically activated
/ it calls module_request("snd-ctl-led") on demand /
2) mark all related kcontrols with
SNDRV_CTL_ELEM_ACCESS_SPK_LED or
SNDRV_CTL_ELEM_ACCESS_MIC_LED

Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

Merge remote-tracking branch 'torvalds/master' into perf/core

To pick up fixes sent via perf/urgent and in the BPF tools/ directories.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'v5.12-rc4' into next

Sync up with the mainline to bring in newest APIs.

Merge tag 'v5.12-rc3' into kvm-arm64/host-stage2

Linux 5.12-rc3

Signed-off-by: Marc Zyngier <maz@kernel.org>

# gpg: Signature made Sun 14 Mar 2021 21:41:02 GMT
# gpg: using RSA key

Merge tag 'v5.12-rc3' into kvm-arm64/host-stage2

Linux 5.12-rc3

Signed-off-by: Marc Zyngier <maz@kernel.org>

# gpg: Signature made Sun 14 Mar 2021 21:41:02 GMT
# gpg: using RSA key ABAF11C65A2970B130ABE3C479BE3E4300411886
# gpg: issuer "torvalds@linux-foundation.org"
# gpg: Can't check signature: No public key

show more ...