Merge drm/drm-fixes into drm-misc-fixes

Backmerging to get updates from v6.15-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'next' into for-linus

Prepare input updates for 6.15 merge window.

Merge tag 'v6.14-rc4' into next

Sync up with the mainline.

Merge tag 'v6.14-rc1' into perf-tools-next

To get the various fixes in the current master.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Merge drm/drm-next into drm-xe-next

Sync to fix conlicts between drm-xe-next and drm-intel-next.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

Merge drm/drm-next into drm-misc-next

Bring rc1 to start the new release dev.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync with v6.14-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and we are stuck at 6.9 so lets bump things forward.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

show more ...

Merge tag 's390-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Alexander Gordeev:

- Select config option KASAN_VMALLOC if KASAN is enabled

- Select co

Merge tag 's390-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Alexander Gordeev:

- Select config option KASAN_VMALLOC if KASAN is enabled

- Select config option VMAP_STACK unconditionally

- Implement arch_atomic_inc() / arch_atomic_dec() functions which
result in a single instruction if compiled for z196 or newer
architectures

- Make layering between atomic.h and atomic_ops.h consistent

- Comment s390 preempt_count implementation

- Remove pre MARCH_HAS_Z196_FEATURES preempt count implementation

- GCC uses the number of lines of an inline assembly to calculate
number of instructions and decide on inlining. Therefore remove
superfluous new lines from a couple of inline assemblies.

- Provide arch_atomic_*_and_test() implementations that allow the
compiler to generate slightly better code.

- Optimize __preempt_count_dec_and_test()

- Remove __bootdata annotations from declarations in header files

- Add missing include of <linux/smp.h> in abs_lowcore.h to provide
declarations for get_cpu() and put_cpu() used in the code

- Fix suboptimal kernel image base when running make kasan.config

- Remove huge_pte_none() and huge_pte_none_mostly() as are identical to
the generic variants

- Remove unused PAGE_KERNEL_EXEC, SEGMENT_KERNEL_EXEC, and
REGION3_KERNEL_EXEC defines

- Simplify noexec page protection handling and change the page, segment
and region3 protection definitions automatically if the instruction
execution-protection facility is not available

- Save one instruction and prefer EXRL instruction over EX in string,
xor_*(), amode31 and other functions

- Create /dev/diag misc device to fetch diagnose specific information
from the kernel and provide it to userspace

- Retrieve electrical power readings using DIAGNOSE 0x324 ioctl

- Make ccw_device_get_ciw() consistent and use array indices instead of
pointer arithmetic

- s390/qdio: Move memory alloc/pointer arithmetic for slib and sl into
one place

- The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that in s390 code

- Add missing TLB range adjustment in pud_free_tlb()

- Improve topology setup by adding early polarization detection

- Fix length checks in codepage_convert() function

- The generic bitops implementation is nearly identical to the s390
one. Switch to the generic variant and decrease a bit the kernel
image size

- Provide an optimized arch_test_bit() implementation which makes use
of flag output constraint. This generates slightly better code

- Provide memory topology information obtanied with DIAGNOSE 0x310
using ioctl.

- Various other small improvements, fixes, and cleanups

Also, some changes came in through a merge of 'pci-device-recovery'
branch:

- Add PCI error recovery status mechanism

- Simplify and document debug_next_entry() logic

- Split private data allocation and freeing out of debug file open()
and close() operations

- Add debug_dump() function that gets a textual representation of a
debug info (e.g. PCI recovery hardware error logs)

- Add formatted content of pci_debug_msg_id to the PCI report

* tag 's390-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (48 commits)
s390/futex: Fix FUTEX_OP_ANDN implementation
s390/diag: Add memory topology information via diag310
s390/bitops: Provide optimized arch_test_bit()
s390/bitops: Switch to generic bitops
s390/ebcdic: Fix length decrement in codepage_convert()
s390/ebcdic: Fix length check in codepage_convert()
s390/ebcdic: Use exrl instead of ex
s390/amode31: Use exrl instead of ex
s390/stackleak: Use exrl instead of ex in __stackleak_poison()
s390/lib: Use exrl instead of ex in xor functions
s390/topology: Improve topology detection
s390/tlb: Add missing TLB range adjustment
s390/pkey: Constify 'struct bin_attribute'
s390/sclp: Constify 'struct bin_attribute'
s390/pci: Constify 'struct bin_attribute'
s390/ipl: Constify 'struct bin_attribute'
s390/crypto/cpacf: Constify 'struct bin_attribute'
s390/qdio: Move memory alloc/pointer arithmetic for slib and sl into one place
s390/cio: Use array indices instead of pointer arithmetic
s390/qdio: Rename feature flag aif_osa to aif_qdio
...

show more ...

s390/diag: Add memory topology information via diag310

Introduce diag310 and memory topology related subcodes.
Provide memory topology information obtanied from diag310 to userspace
via diag ioctl.

s390/diag: Add memory topology information via diag310

Introduce diag310 and memory topology related subcodes.
Provide memory topology information obtanied from diag310 to userspace
via diag ioctl.

Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

show more ...

s390/diag324: Retrieve power readings via diag 0x324

Retrieve electrical power readings for resources in a computing
environment via diag 0x324. diag 0x324 stores the power readings in the
power inf

s390/diag324: Retrieve power readings via diag 0x324

Retrieve electrical power readings for resources in a computing
environment via diag 0x324. diag 0x324 stores the power readings in the
power information block (pib).

Provide power readings from pib via diag324 ioctl interface. diag324
ioctl provides new pib to the user only if the threshold time has passed
since the last call. Otherwise, cache data is returned. When there are
no active readers, cleanup of pib buffer is performed.

Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

show more ...

s390/diag: Create misc device /dev/diag

Create a misc device /dev/diag to fetch diagnose specific information
from the kernel and provide it to userspace.

Reviewed-by: Heiko Carstens <hca@linux.ibm

s390/diag: Create misc device /dev/diag

Create a misc device /dev/diag to fetch diagnose specific information
from the kernel and provide it to userspace.

Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

show more ...