| #
375d5d57 |
| 21-Oct-2026 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 's390-7.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Add support for sclp-vt220 terminal resize events e.g. for QEMU
- Warn
Merge tag 's390-7.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Add support for sclp-vt220 terminal resize events e.g. for QEMU
- Warn if kernel command line contains non-printable EBCDIC characters
- Improve show_code() disassembly output by using reliable markers for the instruction address and faulting instruction
- Rework exception handling to require only a single exception table entry per faulting instruction: convert all inline assemblies from EX_TABLE to the new EX_TABLE_INSN macros. The previous exception handling was error prone since it usually required two EX_TABLE entries: one pointing at the instruction, and one pointing behind it
- Disallow kprobes on instructions with exception table entries to avoid exception handlers decoding a breakpoint instead of the original instruction
- Preemptible percpu ops changes:
- Simplify percpu_entry() and percpu_exit() by encoding the percpu base, offset, and pointer registers into the lowcore marker, allowing percpu_exit() to update the percpu pointer on CPU migration without comparing the interrupted instruction
- Convert this_cpu_cmpxchg(), this_cpu_xchg(), and this_cpu_cmpxchg128() to preemptible percpu ops; provide this_cpu_try_cmpxchg()
- Emulate virtual timer in appldata via delayed work and remove the s390 specific vtimer infrastructure
- Add lock contention tracepoints to rwlock slowpath
- Fix incorrect return address in signal frame setup
- Fix cpum_cf CPU hotplug handling
- Convert various __get_free_pages() / get_zeroed_page() users to kmalloc() / kzalloc()
- PCI:
- Improve RPCIT instruction tracing
- Fix double-free, use-after-free, and resource leaks in zPCI MSI and IRQ setup / cleanup paths
- Crypto and zcrypt:
- Improve reply message and length verification checks for CCA, EP11, and ICA messages to prevent out-of-bounds reads
- Add missing array_index_nospec() for domain index uses in zcrypt to prevent speculative execution bypass
- Fix out-of-bounds read in cca_query_crypto_facility()
- Various other small fixes and improvements
* tag 's390-7.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (102 commits) s390/signal: Cleanup coding style s390/signal: Fix incorrect return address in signal frame s390/probes: Fix wrong mnemonic comment for clgib s390/probes: Add missing fixup for bctgr and bic s390/probes: Fix wrong opcode for cgrb fixup s390: Select ARCH_MEMORY_ORDER_TSO s390/mm: Cleanup pXXp_flush_lazy() routines s390/pci: Add function handle to RPCIT insn trace s390/pci: Use 32-bit fh outside of inline asm s390/pci: Adjust alignment in insn trace s390/sclp: Remove redundant memset after memblock_alloc_low() s390/entry: Save lowcore on invalid kernel stack s390/entry: Last breaking event vs invalid kernel stack s390/percpu: ImplemenHeiko Carstenst this_cpu_try_cmpxchg() s390/percpu: Drop unused output register from arch_this_cpu_to_op() s390/percpu: Drop unused output register from arch_this_cpu_add() s390/percpu: Use asm_inline for arch_this_cpu_add() s390/extable: Remove EX_TABLE macros and fallback extable search s390/bpf: Simplify exception table entry handling s390/sclp: Convert inline assembly to EX_TABLE_INSN ...
show more ...
|
|
Revision tags: v7.3 |
|
| #
efe276b9 |
| 13-Oct-2026 |
Heiko Carstens <hca@linux.ibm.com> |
Merge branch 'exception-handling'
Heiko Carstens says:
====================
Extend the existing get_trap_ip() so that it returns the address of the instruction which caused an exception, and use t
Merge branch 'exception-handling'
Heiko Carstens says:
====================
Extend the existing get_trap_ip() so that it returns the address of the instruction which caused an exception, and use that for both the disassembler as well as exception handling.
This allows improving two things:
- The in kernel disassembler prints PGM+PSW markers which clearly identify the instruction causing an exception, and the current PSW address. This replaces the previous "best guess" approach with '*' and '>' markers
- EX_TABLE entries for inline assemblies are simplified. Only the address of the faulting instruction needs to be provided from now on. The second entry, which is the address following the faulting instruction, is not needed anymore
Disassembler ------------
The output of the kernel disassembler changes. If the disassembly is printed as a result of a program check, 'PGM' and 'PSW' markers identify the instruction which caused the exception, and where the PSW points to. For suppressing exceptions, the output now looks like this:
Krnl Code: 000003ff8dc7bff8: e310f0080004 lg %r1,8(%r15) PGM >000003ff8dc7bffe: e3a0e0000004 lg %r10,0(%r14) PSW >000003ff8dc7c004: a7280000 lhi %r2,0 000003ff8dc7c008: eb9ff0900024 stmg %r9,%r15,144(%r15)
For nullifying exceptions where both addresses are the same, 'PGM+PSW >' is printed instead:
Krnl Code: 000003ff8dc7bff8: e310f0080004 lg %r1,8(%r15) PGM+PSW >000003ff8dc7bffe: e3a0e0000004 lg %r10,0(%r14) 000003ff8dc7c004: a7280000 lhi %r2,0 000003ff8dc7c008: eb9ff0900024 stmg %r9,%r15,144(%r15)
EX_TABLE entries ----------------
With get_trap_ip() now returning the exact faulting instruction address, EX_TABLE entries for inline assemblies are simplified. Only the address of the faulting instruction needs to be provided. The second entry - the address following the faulting instruction - is no longer needed.
For example, an inline assembly using a single instruction can now be written as:
asm_inline volatile( "0: lg %[data],%[addr]\n" "1:\n" EX_TABLE_INSN(0b, 1b));
Previously this required:
asm_inline volatile( " nopr %%r7\n" "0: lg %[data],%[addr]\n" "1: nopr %%r7\n" EX_TABLE(0b, 1b) EX_TABLE(1b, 1b));
The old approach had several non-obvious restrictions:
- If an instruction immediately preceding the inline assembly caused a non-nullifying exception, the PSW would point to the start of the inline assembly. If the faulting instruction was placed there, the exception handler would incorrectly resolve the fault using the inline assembly's fixup handler. Hence, a leading NOP was required before the faulting instruction
- Similarly, an exception table entry placed behind a faulting instruction must also point to an instruction that cannot fault. A nullifying exception on the following instruction would otherwise be incorrectly resolved by that entry
- Furthermore, instructions that can cause both nullifying and non-nullifying exceptions required two separate exception table entries
These restrictions are error-prone and have caused several bugs in the past.
All EX_TABLE* macros have been renamed to EX_TABLE_INSN*. This allows the old and new semantics to be distinguished, and ensures that backports of code using the new semantics will intentionally fail to compile if the new infrastructure is not present.
Note ----
There are some existing oddities and corner cases with kprobes. Only some of them will be addressed with this series. The other ones will be addressed with follow-on changes, since this series is already large enough.
====================
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
show more ...
|
|
Revision tags: v7.3-rc7, v7.3-rc6 |
|
| #
319ccf08 |
| 01-Oct-2026 |
Heiko Carstens <hca@linux.ibm.com> |
s390/tools: Generate bitmap of nullified program checks
Add PGM_CHECKS_NULLIFIED bitmap to gen_bitmaps and add a --pgmcheck command line option to generate the pgmcheck-defs.h header file. The bitma
s390/tools: Generate bitmap of nullified program checks
Add PGM_CHECKS_NULLIFIED bitmap to gen_bitmaps and add a --pgmcheck command line option to generate the pgmcheck-defs.h header file. The bitmap specifies which program checks are nullified, and will be used with future changes.
Change gen_bitmaps.c so it can create bitmaps with different bit numbering: MSB0 bit numbering like before (most significant bit is bit 0), and LSB0 bit numbering (least significant bit is bit 0), which is used for the new bitmap.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
show more ...
|
|
Revision tags: v7.3-rc5, v7.3-rc4, v7.3-rc3, v7.3-rc2, v7.3-rc1, v7.2, v7.2-rc7, v7.2-rc6, v7.2-rc5, v7.2-rc4 |
|
| #
b2128290 |
| 18-Jul-2026 |
Rob Clark <robin.clark@oss.qualcomm.com> |
Merge remote-tracking branch 'drm/drm-next' into msm-next-backmerge
Backmerge of drm-next, mainly to pick up dt bindings docs updates to avoid conflicts.
Signed-off-by: Rob Clark <robin.clark@oss.q
Merge remote-tracking branch 'drm/drm-next' into msm-next-backmerge
Backmerge of drm-next, mainly to pick up dt bindings docs updates to avoid conflicts.
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
show more ...
|
|
Revision tags: v7.2-rc3, v7.2-rc2 |
|
| #
6d177908 |
| 30-Jun-2026 |
Jani Nikula <jani.nikula@intel.com> |
Merge drm/drm-next into drm-intel-next
Sync with v7.2-rc1.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Revision tags: v7.2-rc1, v7.1, v7.1-rc7 |
|
| #
b226489d |
| 04-Jun-2026 |
Thomas Hellström <thomas.hellstrom@linux.intel.com> |
Merge drm/drm-next into drm-xe-next
Backmerging to bring in a build error fix to drm-xe-next.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
| #
0eaed89c |
| 17-Aug-2026 |
Thomas Gleixner <tglx@kernel.org> |
Merge tag 'timers-v7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/daniel.lezcano/linux into timers/clocksource
- Use designated initializers for sh_mtu2, sh_cmt, and sh_tmu, and dro
Merge tag 'timers-v7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/daniel.lezcano/linux into timers/clocksource
- Use designated initializers for sh_mtu2, sh_cmt, and sh_tmu, and drop the unused initializer in the platform_device_id table for sh_mtu2 (Uwe Kleine-König)
- Remove redundant dev_err()/dev_err_probe() messages when devm_request_*_irq() fails, as the helper already logs an error message (Pan Chuang)
- Fix a boot hang on Allwinner D1 when a forced minimum delta is used with the sun4i timer (Felix Yan)
- Fix an IRQ leak in the cpuhp_setup_state() error path by freeing the IRQ on failure in the NXP PIT driver (WenTao Liang)
- Fix incorrect unmapping of shared MMIO between the clocksource and clockevent drivers. If one of them fails to initialize, the error path unmaps the shared MMIO region, leaving the other driver with an invalid mapping on clps711x (Guangshuo Li)
- Make the samsung_pwm driver compatible with PREEMPT_RT by replacing regular spinlocks with raw_spinlock_t in atomic contexts (Marek Szyprowski)
- Use __raw_readl() and __raw_writel() instead of ioread32() and iowrite32() to support SWAP_IO_SPACE in the rtl-otto driver (Rustam Adilov)
- Fix a missing clk_disable_unprepare() call in the timer initialization error path of the Armada driver (Yuho Choi)
Link: https://lore.kernel.org/lkml/75feea31-683d-45a1-87f4-ab045e0152ae@oss.qualcomm.com
show more ...
|
| #
00599d48 |
| 29-Jun-2026 |
Maarten Lankhorst <dev@lankhorst.se> |
Merge drm/drm-fixes into drm-misc-fixes
Pull in tag v7.2-rc1 so that drm-misc-fixes becomes useful again, and drm-misc-next-fixes can be closed.
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
| #
7a0e692a |
| 23-Jun-2026 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge branch 'next' into for-linus
Prepare input updates for 7.2 merge window.
|
| #
aa776949 |
| 16-Jun-2026 |
Jiri Kosina <jkosina@suse.com> |
Merge branch 'for-7.2/wiimote' into for-linus
|
| #
9fb628b4 |
| 03-Jun-2026 |
Paolo Bonzini <pbonzini@redhat.com> |
Merge branch 'kvm-ghcb-for-7.2' into HEAD
Merge the final part of the GHCB 7.2 fixes at https://lore.kernel.org/kvm/20260529183549.1104619-1-pbonzini@redhat.com/.
Patches 1-17 have already been inc
Merge branch 'kvm-ghcb-for-7.2' into HEAD
Merge the final part of the GHCB 7.2 fixes at https://lore.kernel.org/kvm/20260529183549.1104619-1-pbonzini@redhat.com/.
Patches 1-17 have already been included in Linux 7.1; these are minor cleanups, and fixes for behaviors that are suboptimal or contradicting the specification.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
show more ...
|
| #
c82228f7 |
| 02-Jun-2026 |
Jonathan Cameron <jic23@kernel.org> |
Merge tag 'v7.1-rc6' into work
Linux 7.1-rc6
|
| #
da61573f |
| 01-Jun-2026 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
Merge tag 'v7.1-rc6' into char-misc-next
We need the char/misc/iio fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| #
b586d691 |
| 01-Jun-2026 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
Merge tag 'v7.1-rc6' into tty-next
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| #
55311a92 |
| 01-Jun-2026 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
Merge tag 'v7.1-rc6' into usb-next
We need the USB and Thunderbolt fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| #
f9df47af |
| 01-Jun-2026 |
Mark Brown <broonie@kernel.org> |
spi: fsl-lpspi: fix DMA termination issues
Carlos Song (OSS) <carlos.song@oss.nxp.com> says:
This series fixes two issues in the fsl-lpspi DMA transfer error paths.
Patch 1 replaces the deprecated
spi: fsl-lpspi: fix DMA termination issues
Carlos Song (OSS) <carlos.song@oss.nxp.com> says:
This series fixes two issues in the fsl-lpspi DMA transfer error paths.
Patch 1 replaces the deprecated dmaengine_terminate_all() with dmaengine_terminate_sync() across all error paths in fsl_lpspi_dma_transfer().
Patch 2 fixes a missing RX DMA channel termination when TX descriptor preparation fails. Since the RX channel is already submitted and issued before the TX descriptor is prepared, returning -EINVAL without terminating the RX channel leaves it running against buffers that the SPI core will unmap, potentially causing memory corruption.
Link: https://patch.msgid.link/20260525062357.3191349-1-carlos.song@oss.nxp.com
show more ...
|
| #
fff88709 |
| 01-Jun-2026 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge tag 'v7.1-rc6' into next
Sync up with mainline to pull in a fix to IMS PCU driver and other enhancements.
|
|
Revision tags: v7.1-rc6 |
|
| #
f52b1b05 |
| 31-May-2026 |
Takashi Iwai <tiwai@suse.de> |
Merge branch 'for-linus' into for-next
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
| #
e2b773fb |
| 28-May-2026 |
Danilo Krummrich <dakr@kernel.org> |
Merge remote-tracking branch 'drm/drm-next' into drm-rust-next
Backmerge to pull in commit 838d852da850 ("rust: allow `clippy::collapsible_match` globally"), in order to get rid of spurious warnings
Merge remote-tracking branch 'drm/drm-next' into drm-rust-next
Backmerge to pull in commit 838d852da850 ("rust: allow `clippy::collapsible_match` globally"), in order to get rid of spurious warnings messing with developer tooling.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
show more ...
|
| #
a544da90 |
| 28-May-2026 |
Thomas Zimmermann <tzimmermann@suse.de> |
Merge drm/drm-next into drm-misc-next
Backmerging to get GEM LRU fixes from commit 379e8f1c ("drm/gem: Make the GEM LRU lock part of drm_device") and other updates from v7.1-rc5.
Signed-off-by: Tho
Merge drm/drm-next into drm-misc-next
Backmerging to get GEM LRU fixes from commit 379e8f1c ("drm/gem: Make the GEM LRU lock part of drm_device") and other updates from v7.1-rc5.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
show more ...
|
| #
bed29492 |
| 28-May-2026 |
Simona Vetter <simona.vetter@ffwll.ch> |
Merge v7.1-rc5 into drm-next
Boris Brezillion needs the gem lru fixes 379e8f1ca5e9 ("drm/gem: Make the GEM LRU lock part of drm_device") backmerged for drm-misc-next. That also means we need to sort
Merge v7.1-rc5 into drm-next
Boris Brezillion needs the gem lru fixes 379e8f1ca5e9 ("drm/gem: Make the GEM LRU lock part of drm_device") backmerged for drm-misc-next. That also means we need to sort out the rename conflict in panthor with the fixup patch from Boris from drm-tip.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
show more ...
|
| #
2aa8946e |
| 26-May-2026 |
Arnaldo Carvalho de Melo <acme@redhat.com> |
Merge remote-tracking branch 'torvalds/master' into perf-tools-next
To pick up fixes and get in sync with other tools/ libraries used by perf.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.c
Merge remote-tracking branch 'torvalds/master' into perf-tools-next
To pick up fixes and get in sync with other tools/ libraries used by perf.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
show more ...
|
| #
e312f0ff |
| 25-May-2026 |
Jason Gunthorpe <jgg@nvidia.com> |
Merge tag 'v7.1-rc5' into rdma.git for-next
For dependencies in the following patches
Resolve conflicts, use the goto labels from the rc tag.
* tag 'v7.1-rc5': (1526 commits)
Signed-off-by: Jason
Merge tag 'v7.1-rc5' into rdma.git for-next
For dependencies in the following patches
Resolve conflicts, use the goto labels from the rc tag.
* tag 'v7.1-rc5': (1526 commits)
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
show more ...
|
| #
eb19eead |
| 25-May-2026 |
Alexei Starovoitov <ast@kernel.org> |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf 7.1-rc5
Cross-merge BPF and other fixes after downstream PR.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
| #
3bd860dc |
| 25-May-2026 |
Mark Brown <broonie@kernel.org> |
ASoC: add shared BCLK rate constraint for cross-DAI coordination
Troy Mitchell <troy.mitchell@linux.spacemit.com> says:
On some SoCs (e.g. SpacemiT K3), multiple I2S controllers share the same phys
ASoC: add shared BCLK rate constraint for cross-DAI coordination
Troy Mitchell <troy.mitchell@linux.spacemit.com> says:
On some SoCs (e.g. SpacemiT K3), multiple I2S controllers share the same physical BCLK. When one controller is already streaming, the others must use hw_params that result in the same BCLK rate, otherwise the shared clock would be reconfigured and corrupt the active stream.
This series adds framework-level support for this constraint:
Patch 1 adds the dt-bindings for the spacemit,k3-i2s compatible. The K3 SoC uses the same I2S IP as K1 but requires additional clocks: a dedicated sysclk_div, along with c_sysclk and c_bclk which are shared across multiple I2S controllers.
Patch 2 adds a DEFINE_GUARD wrapping snd_soc_card_mutex_lock() and snd_soc_card_mutex_unlock() so that scope-based locking picks up the SND_SOC_CARD_CLASS_RUNTIME lockdep subclass.
Patch 3 adds the constraint logic in soc-pcm.c. During PCM open, every DAI that has a bclk clock pointer gets a hw_rule registered unconditionally. The rule callback runs at hw_refine time: it scans the card for an active peer sharing the same physical BCLK (via clk_is_match()) that has already completed hw_params, then constrains the current stream's rate to match the established BCLK rate. The first DAI to complete hw_params is unconstrained; subsequent DAIs must match. Two modes are supported:
- Default (I2S): BCLK = rate * channels * sample_bits. The rule derives the valid rate range from the current channel and sample_bits intervals.
- Explicit ratio (TDM): if the driver sets dai->bclk_ratio (e.g. slots * slot_width), the rule computes the single valid rate as active_bclk_rate / bclk_ratio.
This series was prompted by review feedback on the SpacemiT K3 I2S series, where a vendor-specific fixed-sample-rate property was rejected in favor of a generic framework solution: https://lore.kernel.org/all/afFqgF6ZRwYdfUmL@sirena.co.uk/
Link: https://patch.msgid.link/20260522-i2s-same-blk-v4-0-a71a86faaa20@linux.spacemit.com
show more ...
|