Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge tag 'v6.10' into next

Sync up with mainline to bring in device_for_each_child_node_scoped()
and other newer APIs.

Merge branch 'next' into for-linus

Prepare input updates for 6.11 merge window.

Merge tag 'v6.9' into next

Sync up with the mainline to bring in the new cleanup API.

Merge drm-misc-next-2024-07-04 into drm-misc-next-fixes

Let's start the drm-misc-next-fixes cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync to v6.10-rc3.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-xe-next

Needed to get tracing cleanup and add mmio tracing series.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge remote-tracking branch 'drm-misc/drm-misc-next' into HEAD

Merge drm-misc-next tree into the msm-next tree in order to be able to
use HDMI connector framework for the MSM HDMI driver.

Merge drm/drm-next into drm-misc-next

Let's start the new release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-gt-next

Some display refactoring patches are needed in order to allow conflict-
less merging.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

Merge branch 'for-6.11/trivial' into for-linus

Couple of trivial fixes:
- extra semicolon (Chen Ni)
- typo (Thorsten Blum)

Merge branch 'tip/x86/cpu'

The Lunarlake patches rely on the new VFM stuff.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge topic branches 'clkdev' and 'fixes' into for-linus

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

v6.10-rc1 is released, forward from v6.9

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Merge tag 'riscv-for-linus-6.10-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V updates from Palmer Dabbelt:

- Add byte/half-word compare-and-exchange, emulated via L

Merge tag 'riscv-for-linus-6.10-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V updates from Palmer Dabbelt:

- Add byte/half-word compare-and-exchange, emulated via LR/SC loops

- Support for Rust

- Support for Zihintpause in hwprobe

- Add PR_RISCV_SET_ICACHE_FLUSH_CTX prctl()

- Support lockless lockrefs

* tag 'riscv-for-linus-6.10-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (42 commits)
riscv: defconfig: Enable CONFIG_CLK_SOPHGO_CV1800
riscv: select ARCH_HAS_FAST_MULTIPLIER
riscv: mm: still create swiotlb buffer for kmalloc() bouncing if required
riscv: Annotate pgtable_l{4,5}_enabled with __ro_after_init
riscv: Remove redundant CONFIG_64BIT from pgtable_l{4,5}_enabled
riscv: mm: Always use an ASID to flush mm contexts
riscv: mm: Preserve global TLB entries when switching contexts
riscv: mm: Make asid_bits a local variable
riscv: mm: Use a fixed layout for the MM context ID
riscv: mm: Introduce cntx2asid/cntx2version helper macros
riscv: Avoid TLB flush loops when affected by SiFive CIP-1200
riscv: Apply SiFive CIP-1200 workaround to single-ASID sfence.vma
riscv: mm: Combine the SMP and UP TLB flush code
riscv: Only send remote fences when some other CPU is online
riscv: mm: Broadcast kernel TLB flushes only when needed
riscv: Use IPIs for remote cache/TLB flushes by default
riscv: Factor out page table TLB synchronization
riscv: Flush the instruction cache during SMP bringup
riscv: hwprobe: export Zihintpause ISA extension
riscv: misaligned: remove CONFIG_RISCV_M_MODE specific code
...

show more ...

Merge patch series "riscv: ASID-related and UP-related TLB flush enhancements"

Samuel Holland <samuel.holland@sifive.com> says:

This series converts uniprocessor kernel builds to use the same TLB
f

Merge patch series "riscv: ASID-related and UP-related TLB flush enhancements"

Samuel Holland <samuel.holland@sifive.com> says:

This series converts uniprocessor kernel builds to use the same TLB
flushing code as SMP builds, to take advantage of batching and existing
range- and ASID-based TLB flush optimizations. It optimizes out IPIs and
SBI calls based on the online CPU count, which also covers the scenario
where SMP was enabled at build time but only one CPU is present/online.
A final optimization is to use single-ASID flushes wherever possible, to
avoid unnecessary TLB misses for kernel mappings.

This series has a semantic conflict with the AIA patches that are in
linux-next due to the removal of the third parameter of
riscv_ipi_set_virq_range(), which is called from imsic_ipi_domain_init()
in drivers/irqchip/irq-riscv-imsic-early.c. The resolution is to remove
the extra argument from the call site.

Here are some numbers from D1 which show the performance impact:

v6.9-rc1:
System Benchmarks Partial Index BASELINE RESULT INDEX
Execl Throughput 43.0 198.5 46.2
File Copy 1024 bufsize 2000 maxblocks 3960.0 73934.4 186.7
File Copy 256 bufsize 500 maxblocks 1655.0 20242.6 122.3
File Copy 4096 bufsize 8000 maxblocks 5800.0 197706.4 340.9
Pipe Throughput 12440.0 176974.2 142.3
Pipe-based Context Switching 4000.0 23626.8 59.1
Process Creation 126.0 449.9 35.7
Shell Scripts (1 concurrent) 42.4 544.4 128.4
Shell Scripts (16 concurrent) --- 35.3 ---
Shell Scripts (8 concurrent) 6.0 71.6 119.3
System Call Overhead 15000.0 248072.6 165.4
========
System Benchmarks Index Score (Partial Only) 110.6

v6.9-rc1 + this patch series:
System Benchmarks Partial Index BASELINE RESULT INDEX
Execl Throughput 43.0 196.8 45.8
File Copy 1024 bufsize 2000 maxblocks 3960.0 71782.2 181.3
File Copy 256 bufsize 500 maxblocks 1655.0 21269.4 128.5
File Copy 4096 bufsize 8000 maxblocks 5800.0 199424.0 343.8
Pipe Throughput 12440.0 196468.6 157.9
Pipe-based Context Switching 4000.0 24261.8 60.7
Process Creation 126.0 459.0 36.4
Shell Scripts (1 concurrent) 42.4 543.8 128.2
Shell Scripts (16 concurrent) --- 35.5 ---
Shell Scripts (8 concurrent) 6.0 71.7 119.6
System Call Overhead 15000.0 259415.2 172.9
========
System Benchmarks Index Score (Partial Only) 113.0

* b4-shazam-lts:
riscv: mm: Always use an ASID to flush mm contexts
riscv: mm: Preserve global TLB entries when switching contexts
riscv: mm: Make asid_bits a local variable
riscv: mm: Use a fixed layout for the MM context ID
riscv: mm: Introduce cntx2asid/cntx2version helper macros
riscv: Avoid TLB flush loops when affected by SiFive CIP-1200
riscv: Apply SiFive CIP-1200 workaround to single-ASID sfence.vma
riscv: mm: Combine the SMP and UP TLB flush code
riscv: Only send remote fences when some other CPU is online
riscv: mm: Broadcast kernel TLB flushes only when needed
riscv: Use IPIs for remote cache/TLB flushes by default
riscv: Factor out page table TLB synchronization
riscv: Flush the instruction cache during SMP bringup

Link: https://lore.kernel.org/r/20240327045035.368512-1-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

show more ...

Merge patch series "riscv: Create and document PR_RISCV_SET_ICACHE_FLUSH_CTX prctl"

Charlie Jenkins <charlie@rivosinc.com> says:

Improve the performance of icache flushing by creating a new prctl f

Merge patch series "riscv: Create and document PR_RISCV_SET_ICACHE_FLUSH_CTX prctl"

Charlie Jenkins <charlie@rivosinc.com> says:

Improve the performance of icache flushing by creating a new prctl flag
PR_RISCV_SET_ICACHE_FLUSH_CTX. The interface is left generic to allow
for future expansions such as with the proposed J extension [1].

Documentation is also provided to explain the use case.

Patch sent to add PR_RISCV_SET_ICACHE_FLUSH_CTX to man-pages [2].

[1] https://github.com/riscv/riscv-j-extension
[2] https://lore.kernel.org/linux-man/20240124-fencei_prctl-v1-1-0bddafcef331@rivosinc.com

* b4-shazam-merge:
cpumask: Add assign cpu
documentation: Document PR_RISCV_SET_ICACHE_FLUSH_CTX prctl
riscv: Include riscv_set_icache_flush_ctx prctl
riscv: Remove unnecessary irqflags processor.h include

Link: https://lore.kernel.org/r/20240312-fencei-v13-0-4b6bdc2bbf32@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

show more ...

riscv: mm: Preserve global TLB entries when switching contexts

If the CPU does not support multiple ASIDs, all MM contexts use ASID 0.
In this case, it is still beneficial to flush the TLB by ASID,

riscv: mm: Preserve global TLB entries when switching contexts

If the CPU does not support multiple ASIDs, all MM contexts use ASID 0.
In this case, it is still beneficial to flush the TLB by ASID, as the
single-ASID variant of the sfence.vma instruction preserves TLB entries
for global (kernel) pages.

This optimization is recommended by the RISC-V privileged specification:

If the implementation does not provide ASIDs, or software chooses
to always use ASID 0, then after every satp write, software should
execute SFENCE.VMA with rs1=x0. In the common case that no global
translations have been modified, rs2 should be set to a register
other than x0 but which contains the value zero, so that global
translations are not flushed.

It is not possible to apply this optimization when using the ASID
allocator, because that code must flush the TLB for all ASIDs at once
when incrementing the version number.

Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240327045035.368512-13-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

show more ...

riscv: mm: Make asid_bits a local variable

This variable is only used inside asids_init().

Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive

riscv: mm: Make asid_bits a local variable

This variable is only used inside asids_init().

Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240327045035.368512-12-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

show more ...

riscv: mm: Use a fixed layout for the MM context ID

Currently, the size of the ASID field in the MM context ID dynamically
depends on the number of hardware-supported ASID bits. This requires
readin

riscv: mm: Use a fixed layout for the MM context ID

Currently, the size of the ASID field in the MM context ID dynamically
depends on the number of hardware-supported ASID bits. This requires
reading a global variable to extract either field from the context ID.
Instead, allocate the maximum possible number of bits to the ASID field,
so the layout of the context ID is known at compile-time.

Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240327045035.368512-11-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

show more ...

riscv: mm: Introduce cntx2asid/cntx2version helper macros

When using the ASID allocator, the MM context ID contains two values:
the ASID in the lower bits, and the allocator version number in the
re

riscv: mm: Introduce cntx2asid/cntx2version helper macros

When using the ASID allocator, the MM context ID contains two values:
the ASID in the lower bits, and the allocator version number in the
remaining bits. Use macros to make this separation more obvious.

Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240327045035.368512-10-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

show more ...

riscv: Include riscv_set_icache_flush_ctx prctl

Support new prctl with key PR_RISCV_SET_ICACHE_FLUSH_CTX to enable
optimization of cross modifying code. This prctl enables userspace code
to use icac

riscv: Include riscv_set_icache_flush_ctx prctl

Support new prctl with key PR_RISCV_SET_ICACHE_FLUSH_CTX to enable
optimization of cross modifying code. This prctl enables userspace code
to use icache flushing instructions such as fence.i with the guarantee
that the icache will continue to be clean after thread migration.

Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240312-fencei-v13-2-4b6bdc2bbf32@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

show more ...

Merge remote-tracking branch 'torvalds/master' into perf-tools-next

To pick up fixes sent via perf-tools, by Namhyung Kim.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge branch 'master' into mm-stable

Merge drm/drm-next into drm-xe-next

Backmerging drm-next in order to get up-to-date and in particular
to access commit 9ca5facd0400f610f3f7f71aeb7fc0b949a48c67.

Signed-off-by: Thomas Hellström <tho

Merge drm/drm-next into drm-xe-next

Backmerging drm-next in order to get up-to-date and in particular
to access commit 9ca5facd0400f610f3f7f71aeb7fc0b949a48c67.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

show more ...