riscv: Remove unused members from struct cpu_operations

name is not used anywhere at all. cpu_prepare and cpu_disable do nothing
and always return 0 if implemented.

Signed-off-by: Samuel Holland <s

riscv: Remove unused members from struct cpu_operations

name is not used anywhere at all. cpu_prepare and cpu_disable do nothing
and always return 0 if implemented.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231121234736.3489608-3-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

show more ...

riscv: Deduplicate code in setup_smp()

Both the ACPI and DT implementations contain some of the same code.
Move it to the calling function so it is not duplicated.

Signed-off-by: Samuel Holland <sa

riscv: Deduplicate code in setup_smp()

Both the ACPI and DT implementations contain some of the same code.
Move it to the calling function so it is not duplicated.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231121234736.3489608-2-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

show more ...

Merge branch 'for-6.8/amd-sfh' into for-linus

- addition of new interfaces to export User presence information and
Ambient light from amd-sfh to other drivers within the kernel (Basavaraj
Natika

Merge branch 'for-6.8/amd-sfh' into for-linus

- addition of new interfaces to export User presence information and
Ambient light from amd-sfh to other drivers within the kernel (Basavaraj
Natikar)

show more ...

Merge drm/drm-next into drm-misc-next

Let's kickstart the v6.8 release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-gt-next

Work that needs to land in drm-intel-gt-next depends on two patches only
present in drm-intel-next, absence of which is causing a merge conflict:

3b918f4

Merge drm/drm-next into drm-intel-gt-next

Work that needs to land in drm-intel-gt-next depends on two patches only
present in drm-intel-next, absence of which is causing a merge conflict:

3b918f4f0c8b ("drm/i915/pxp: Optimize GET_PARAM:PXP_STATUS")
ac765b7018f6 ("drm/i915/pxp/mtl: intel_pxp_init_hw needs runtime-pm inside pm-complete")

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

No conflicts.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'tip/perf/urgent'

Avoid conflicts, base on fixes.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge tag 'thunderbolt-for-v6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus

Mika writes:

thunderbolt: Fixes for v6.7-rc3

This includes following USB4/T

Merge tag 'thunderbolt-for-v6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus

Mika writes:

thunderbolt: Fixes for v6.7-rc3

This includes following USB4/Thunderbolt fixes for v6.7-rc3:

- Fix a lane bonding issue on ASMedia USB4 device
- Send uevents when link is switched to asymmetric or symmetric
- Only add device router DP IN adapters to the head of resource list
to avoid issues during system resume.

All these have been in linux-next with no reported issues.

* tag 'thunderbolt-for-v6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: (1451 commits)
thunderbolt: Only add device router DP IN to the head of the DP resource list
thunderbolt: Send uevent after asymmetric/symmetric switch
thunderbolt: Set lane bonding bit only for downstream port

show more ...

Merge tag 'riscv-for-linus-6.7-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull more RISC-V updates from Palmer Dabbelt:

- Support for handling misaligned accesses in S-mode

Merge tag 'riscv-for-linus-6.7-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull more RISC-V updates from Palmer Dabbelt:

- Support for handling misaligned accesses in S-mode

- Probing for misaligned access support is now properly cached and
handled in parallel

- PTDUMP now reflects the SW reserved bits, as well as the PBMT and
NAPOT extensions

- Performance improvements for TLB flushing

- Support for many new relocations in the module loader

- Various bug fixes and cleanups

* tag 'riscv-for-linus-6.7-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits)
riscv: Optimize bitops with Zbb extension
riscv: Rearrange hwcap.h and cpufeature.h
drivers: perf: Do not broadcast to other cpus when starting a counter
drivers: perf: Check find_first_bit() return value
of: property: Add fw_devlink support for msi-parent
RISC-V: Don't fail in riscv_of_parent_hartid() for disabled HARTs
riscv: Fix set_memory_XX() and set_direct_map_XX() by splitting huge linear mappings
riscv: Don't use PGD entries for the linear mapping
RISC-V: Probe misaligned access speed in parallel
RISC-V: Remove __init on unaligned_emulation_finish()
RISC-V: Show accurate per-hart isa in /proc/cpuinfo
RISC-V: Don't rely on positional structure initialization
riscv: Add tests for riscv module loading
riscv: Add remaining module relocations
riscv: Avoid unaligned access when relocating modules
riscv: split cache ops out of dma-noncoherent.c
riscv: Improve flush_tlb_kernel_range()
riscv: Make __flush_tlb_range() loop over pte instead of flushing the whole tlb
riscv: Improve flush_tlb_range() for hugetlb pages
riscv: Improve tlb_flush()
...

show more ...

Merge tag 'riscv-for-linus-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V updates from Palmer Dabbelt:

- Support for cbo.zero in userspace

- Support for CBOs o

Merge tag 'riscv-for-linus-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V updates from Palmer Dabbelt:

- Support for cbo.zero in userspace

- Support for CBOs on ACPI-based systems

- A handful of improvements for the T-Head cache flushing ops

- Support for software shadow call stacks

- Various cleanups and fixes

* tag 'riscv-for-linus-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (31 commits)
RISC-V: hwprobe: Fix vDSO SIGSEGV
riscv: configs: defconfig: Enable configs required for RZ/Five SoC
riscv: errata: prefix T-Head mnemonics with th.
riscv: put interrupt entries into .irqentry.text
riscv: mm: Update the comment of CONFIG_PAGE_OFFSET
riscv: Using TOOLCHAIN_HAS_ZIHINTPAUSE marco replace zihintpause
riscv/mm: Fix the comment for swap pte format
RISC-V: clarify the QEMU workaround in ISA parser
riscv: correct pt_level name via pgtable_l5/4_enabled
RISC-V: Provide pgtable_l5_enabled on rv32
clocksource: timer-riscv: Increase rating of clock_event_device for Sstc
clocksource: timer-riscv: Don't enable/disable timer interrupt
lkdtm: Fix CFI_BACKWARD on RISC-V
riscv: Use separate IRQ shadow call stacks
riscv: Implement Shadow Call Stack
riscv: Move global pointer loading to a macro
riscv: Deduplicate IRQ stack switching
riscv: VMAP_STACK overflow detection thread-safe
RISC-V: cacheflush: Initialize CBO variables on ACPI systems
RISC-V: ACPI: RHCT: Add function to get CBO block sizes
...

show more ...

RISC-V: Probe misaligned access speed in parallel

Probing for misaligned access speed takes about 0.06 seconds. On a
system with 64 cores, doing this in smp_callin() means it's done
serially, extend

RISC-V: Probe misaligned access speed in parallel

Probing for misaligned access speed takes about 0.06 seconds. On a
system with 64 cores, doing this in smp_callin() means it's done
serially, extending boot time by 3.8 seconds. That's a lot of boot time.

Instead of measuring each CPU serially, let's do the measurements on
all CPUs in parallel. If we disable preemption on all CPUs, the
jiffies stop ticking, so we can do this in stages of 1) everybody
except core 0, then 2) core 0. The allocations are all done outside of
on_each_cpu() to avoid calling alloc_pages() with interrupts disabled.

For hotplugged CPUs that come in after the boot time measurement,
register CPU hotplug callbacks, and do the measurement there. Interrupts
are enabled in those callbacks, so they're fine to do alloc_pages() in.

Reported-by: Jisheng Zhang <jszhang@kernel.org>
Closes: https://lore.kernel.org/all/mhng-9359993d-6872-4134-83ce-c97debe1cf9a@palmer-ri-x1c9/T/#mae9b8f40016f9df428829d33360144dc5026bcbf
Fixes: 584ea6564bca ("RISC-V: Probe for unaligned access speed")
Signed-off-by: Evan Green <evan@rivosinc.com>
Link: https://lore.kernel.org/r/20231106225855.3121724-1-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.7 merge window.

Merge patch series "Add support to handle misaligned accesses in S-mode"

Clément Léger <cleger@rivosinc.com> says:

Since commit 61cadb9 ("Provide new description of misaligned load/store
behavior c

Merge patch series "Add support to handle misaligned accesses in S-mode"

Clément Léger <cleger@rivosinc.com> says:

Since commit 61cadb9 ("Provide new description of misaligned load/store
behavior compatible with privileged architecture.") in the RISC-V ISA
manual, it is stated that misaligned load/store might not be supported.
However, the RISC-V kernel uABI describes that misaligned accesses are
supported. In order to support that, this series adds support for S-mode
handling of misaligned accesses as well support for prctl(PR_UNALIGN).

Handling misaligned access in kernel allows for a finer grain control
of the misaligned accesses behavior, and thanks to the prctl() call,
can allow disabling misaligned access emulation to generate SIGBUS. User
space can then optimize its software by removing such access based on
SIGBUS generation.

This series is useful when using a SBI implementation that does not
handle misaligned traps as well as detecting misaligned accesses
generated by userspace application using the prctrl(PR_SET_UNALIGN)
feature.

This series can be tested using the spike simulator[1] and a modified
openSBI version[2] which allows to always delegate misaligned load/store to
S-mode. A test[3] that exercise various instructions/registers can be
executed to verify the unaligned access support.

[1] https://github.com/riscv-software-src/riscv-isa-sim
[2] https://github.com/rivosinc/opensbi/tree/dev/cleger/no_misaligned
[3] https://github.com/clementleger/unaligned_test

* b4-shazam-merge:
riscv: add support for PR_SET_UNALIGN and PR_GET_UNALIGN
riscv: report misaligned accesses emulation to hwprobe
riscv: annotate check_unaligned_access_boot_cpu() with __init
riscv: add support for sysctl unaligned_enabled control
riscv: add floating point insn support to misaligned access emulation
riscv: report perf event for misaligned fault
riscv: add support for misaligned trap handling in S-mode
riscv: remove unused functions in traps_misaligned.c

Link: https://lore.kernel.org/r/20231004151405.521596-1-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

show more ...

riscv: report misaligned accesses emulation to hwprobe

hwprobe provides a way to report if misaligned access are emulated. In
order to correctly populate that feature, we can check if it actually
tr

riscv: report misaligned accesses emulation to hwprobe

hwprobe provides a way to report if misaligned access are emulated. In
order to correctly populate that feature, we can check if it actually
traps when doing a misaligned access. This can be checked using an
exception table entry which will actually be used when a misaligned
access is done from kernel mode.

Signed-off-by: Clément Léger <cleger@rivosinc.com>
Link: https://lore.kernel.org/r/20231004151405.521596-8-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

show more ...

Merge patch series "RISC-V: Enable cbo.zero in usermode"

Andrew Jones <ajones@ventanamicro.com> says:

In order for usermode to issue cbo.zero, it needs privilege granted to
issue the extension inst

Merge patch series "RISC-V: Enable cbo.zero in usermode"

Andrew Jones <ajones@ventanamicro.com> says:

In order for usermode to issue cbo.zero, it needs privilege granted to
issue the extension instruction (patch 2) and to know that the extension
is available and its block size (patch 3). Patch 1 could be separate from
this series (it just fixes up some error messages), patches 4-5 convert
the hwprobe selftest to a statically-linked, TAP test and patch 6 adds a
new hwprobe test for the new information as well as testing CBO
instructions can or cannot be issued as appropriate.

* b4-shazam-merge:
RISC-V: selftests: Add CBO tests
RISC-V: selftests: Convert hwprobe test to kselftest API
RISC-V: selftests: Statically link hwprobe test
RISC-V: hwprobe: Expose Zicboz extension and its block size
RISC-V: Enable cbo.zero in usermode
RISC-V: Make zicbom/zicboz errors consistent

Link: https://lore.kernel.org/r/20230918131518.56803-8-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

show more ...

Merge branch 'for-6.7/config_pm' into for-linus

- #ifdef CONFIG_PM removal from HID code (Thomas Weißschuh)

Merge branch 'linus' into smp/core

Pull in upstream to get the fixes so depending changes can be applied.

Merge drm/drm-next into drm-misc-next

Updating drm-misc-next to the state of Linux v6.6-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v6.6-rc4' into perf/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

RISC-V: Enable cbo.zero in usermode

When Zicboz is present, enable its instruction (cbo.zero) in
usermode by setting its respective senvcfg bit. We don't bother
trying to set this bit per-task, whic

RISC-V: Enable cbo.zero in usermode

When Zicboz is present, enable its instruction (cbo.zero) in
usermode by setting its respective senvcfg bit. We don't bother
trying to set this bit per-task, which would also require an
interface for tasks to request enabling and/or disabling. Instead,
permanently set the bit for each hart which has the extension when
bringing it online.

This patch also introduces riscv_cpu_has_extension_[un]likely()
functions to check a specific hart's ISA bitmap for extensions.
Prior to checking the specific hart's bitmap in these functions
we try the bitmap which represents the LCD of extensions, but only
when we know it will use its optimized, alternatives path by gating
its call on CONFIG_RISCV_ALTERNATIVE. When alternatives are used, the
compiler ensures that the invocation of the LCD search becomes a
constant true or false. When it's true, even the new functions will
completely vanish from their callsites. OTOH, when the LCD check is
false, we need to do a search of the hart's ISA bitmap. Had we also
checked the LCD bitmap without the use of alternatives, then we would
have ended up with two bitmap searches instead of one.

Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230918131518.56803-10-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

show more ...

Merge tag 'v6.6-rc2' into locking/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync to v6.6-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

No conflicts.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'riscv-for-linus-6.6-mw2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull more RISC-V updates from Palmer Dabbelt:

- The kernel now dynamically probes for misaligned

Merge tag 'riscv-for-linus-6.6-mw2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull more RISC-V updates from Palmer Dabbelt:

- The kernel now dynamically probes for misaligned access speed, as
opposed to relying on a table of known implementations.

- Support for non-coherent devices on systems using the Andes AX45MP
core, including the RZ/Five SoCs.

- Support for the V extension in ptrace(), again.

- Support for KASLR.

- Support for the BPF prog pack allocator in RISC-V.

- A handful of bug fixes and cleanups.

* tag 'riscv-for-linus-6.6-mw2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (25 commits)
soc: renesas: Kconfig: For ARCH_R9A07G043 select the required configs if dependencies are met
riscv: Kconfig.errata: Add dependency for RISCV_SBI in ERRATA_ANDES config
riscv: Kconfig.errata: Drop dependency for MMU in ERRATA_ANDES_CMO config
riscv: Kconfig: Select DMA_DIRECT_REMAP only if MMU is enabled
bpf, riscv: use prog pack allocator in the BPF JIT
riscv: implement a memset like function for text
riscv: extend patch_text_nosync() for multiple pages
bpf: make bpf_prog_pack allocator portable
riscv: libstub: Implement KASLR by using generic functions
libstub: Fix compilation warning for rv32
arm64: libstub: Move KASLR handling functions to kaslr.c
riscv: Dump out kernel offset information on panic
riscv: Introduce virtual kernel mapping KASLR
RISC-V: Add ptrace support for vectors
soc: renesas: Kconfig: Select the required configs for RZ/Five SoC
cache: Add L2 cache management for Andes AX45MP RISC-V core
dt-bindings: cache: andestech,ax45mp-cache: Add DT binding documentation for L2 cache controller
riscv: mm: dma-noncoherent: nonstandard cache operations support
riscv: errata: Add Andes alternative ports
riscv: asm: vendorid_list: Add Andes Technology to the vendors list
...

show more ...