Merge tag 'soc-new-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull new SoC support from Arnd Bergmann:
"Two new SoC families are added here, with devicetree files and a
little

Merge tag 'soc-new-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull new SoC support from Arnd Bergmann:
"Two new SoC families are added here, with devicetree files and a
little bit of infrastructure to allow booting:

- Blaize BLZP1600 is an AI chip using custom GSP (Graph Streaming
Processor) cores for computation, and two small Cortex-A53 cores
that run the operating system.

- SpacemiT K1 is a 64-bit RISC-V chip, using eight custom RVA22
compatible CPU cores with vector support.

Also marketed at AI applications, it has a much slower NPU compared
to BLZP1600, but in turn focuses on the CPU performance"

* tag 'soc-new-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
riscv: dts: spacemit: move aliases to board dts
riscv: dts: spacemit: add pinctrl property to uart0 in BPI-F3
riscv: defconfig: enable SpacemiT SoC
riscv: dts: spacemit: add Banana Pi BPI-F3 board device tree
riscv: dts: add initial SpacemiT K1 SoC device tree
riscv: add SpacemiT SoC family Kconfig support
dt-bindings: serial: 8250: Add SpacemiT K1 uart compatible
dt-bindings: interrupt-controller: Add SpacemiT K1 PLIC
dt-bindings: timer: Add SpacemiT K1 CLINT
dt-bindings: riscv: add SpacemiT K1 bindings
dt-bindings: riscv: Add SpacemiT X60 compatibles
MAINTAINERS: setup support for SpacemiT SoC tree
MAINTAINER: Add entry for Blaize SoC
arm64: defconfig: Enable Blaize BLZP1600 platform
arm64: dts: Add initial support for Blaize BLZP1600 CB2
arm64: Add Blaize BLZP1600 SoC family
dt-bindings: arm: blaize: Add Blaize BLZP1600 SoC
dt-bindings: Add Blaize vendor prefix

show more ...

Merge tag 'spacemit-dt-for-6.14-1' of https://github.com/spacemit-com/linux into soc/newsoc

RISC-V SpacemiT DT changes for 6.14

This adds support for the SpacemiT K1 SoC and the Banana Pi F3
board

Merge tag 'spacemit-dt-for-6.14-1' of https://github.com/spacemit-com/linux into soc/newsoc

RISC-V SpacemiT DT changes for 6.14

This adds support for the SpacemiT K1 SoC and the Banana Pi F3
board using it:

- basic device tree support
- pinctrl dt node info
- update MAINTAINERS info

* tag 'spacemit-dt-for-6.14-1' of https://github.com/spacemit-com/linux:
riscv: dts: spacemit: move aliases to board dts
riscv: dts: spacemit: add pinctrl property to uart0 in BPI-F3
riscv: defconfig: enable SpacemiT SoC
riscv: dts: spacemit: add Banana Pi BPI-F3 board device tree
riscv: dts: add initial SpacemiT K1 SoC device tree
riscv: add SpacemiT SoC family Kconfig support
dt-bindings: serial: 8250: Add SpacemiT K1 uart compatible
dt-bindings: interrupt-controller: Add SpacemiT K1 PLIC
dt-bindings: timer: Add SpacemiT K1 CLINT
dt-bindings: riscv: add SpacemiT K1 bindings
dt-bindings: riscv: Add SpacemiT X60 compatibles
MAINTAINERS: setup support for SpacemiT SoC tree

Link: https://wiki.banana-pi.org/Banana_Pi_BPI-F3
Link: https://www.spacemit.com/en/key-stone-k1/
Link: https://lore.kernel.org/r/20250117004911-GYA25021@gentoo
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

riscv: dts: spacemit: add Banana Pi BPI-F3 board device tree

Banana Pi BPI-F3 [1] is a industrial grade RISC-V development board, it
design with SpacemiT K1 8 core RISC-V chip [2].

Currently only s

riscv: dts: spacemit: add Banana Pi BPI-F3 board device tree

Banana Pi BPI-F3 [1] is a industrial grade RISC-V development board, it
design with SpacemiT K1 8 core RISC-V chip [2].

Currently only support booting into console with only uart enabled,
other features will be added soon later.

Link: https://docs.banana-pi.org/en/BPI-F3/BananaPi_BPI-F3 [1]
Link: https://www.spacemit.com/en/spacemit-key-stone-2/ [2]
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Acked-by: Jesse Taube <jesse@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Yixun Lan <dlan@gentoo.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.11 merge window.

Merge tag 'v6.9' into next

Sync up with the mainline to bring in the new cleanup API.

Merge drm/drm-next into drm-intel-gt-next

Some display refactoring patches are needed in order to allow conflict-
less merging.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

Merge topic branches 'clkdev' and 'fixes' into for-linus

Merge branch 'master' into mm-stable

Merge drm/drm-next into drm-xe-next

Backmerging drm-next in order to get up-to-date and in particular
to access commit 9ca5facd0400f610f3f7f71aeb7fc0b949a48c67.

Signed-off-by: Thomas Hellström <tho

Merge drm/drm-next into drm-xe-next

Backmerging drm-next in order to get up-to-date and in particular
to access commit 9ca5facd0400f610f3f7f71aeb7fc0b949a48c67.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

show more ...

Merge tag 'phy_dp_modes_6.10' into msm-next-lumag

Merge DisplayPort subnode API in order to allow DisplayPort driver to
configure the PHYs either to the DP or eDP mode, depending on hardware
configu

Merge tag 'phy_dp_modes_6.10' into msm-next-lumag

Merge DisplayPort subnode API in order to allow DisplayPort driver to
configure the PHYs either to the DP or eDP mode, depending on hardware
configuration.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

Merge drm/drm-next into drm-intel-next

Catching up on 6.9-rc2

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.9-rc2 changes into drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'topic/sound-devel-6.10' into for-next

Merge tag 'v6.9-rc1' into sched/core, to pick up fixes and to refresh the branch

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'asoc-fix-v6.9-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.9

A relatively large set of fixes here, the biggest piece of it is a

Merge tag 'asoc-fix-v6.9-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.9

A relatively large set of fixes here, the biggest piece of it is a
series correcting some problems with the delay reporting for Intel SOF
cards but there's a bunch of other things. Everything here is driver
specific except for a fix in the core for an issue with sign extension
handling volume controls.

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Backmerging to get drm-misc-fixes to the state of v6.9-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Backmerge to bring Xe driver to drm-intel-next.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge tag 'soc-dt-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC device tree updates from Arnd Bergmann:
"There is very little going on with new SoC support this time, all t

Merge tag 'soc-dt-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC device tree updates from Arnd Bergmann:
"There is very little going on with new SoC support this time, all the
new chips are variations of others that we already support, and they
are all based on ARMv8 cores:

- Mediatek MT7981B (Filogic 820) and MT7988A (Filogic 880) are
networking SoCs designed to be used in wireless routers, similar to
the already supported MT7986A (Filogic 830).

- NXP i.MX8DXP is a variant of i.MX8QXP, with two CPU cores less.
These are used in many embedded and industrial applications.

- Renesas R8A779G2 (R-Car V4H ES2.0) and R8A779H0 (R-Car V4M) are
automotive SoCs.

- TI J722S is another automotive variant of its K3 family, related to
the AM62 series.

There are a total of 7 new arm32 machines and 45 arm64 ones, including

- Two Android phones based on the old Tegra30 chip

- Two machines using Cortex-A53 SoCs from Allwinner, a mini PC and a
SoM development board

- A set-top box using Amlogic Meson G12A S905X2

- Eight embedded board using NXP i.MX6/8/9

- Three machines using Mediatek network router chips

- Ten Chromebooks, all based on Mediatek MT8186

- One development board based on Mediatek MT8395 (Genio 1200)

- Seven tablets and phones based on Qualcomm SoCs, most of them from
Samsung.

- A third development board for Qualcomm SM8550 (Snapdragon 8 Gen 2)

- Three variants of the "White Hawk" board for Renesas automotive
SoCs

- Ten Rockchips RK35xx based machines, including NAS, Tablet, Game
console and industrial form factors.

- Three evaluation boards for TI K3 based SoCs

The other changes are mainly the usual feature additions for existing
hardware, cleanups, and dtc compile time fixes. One notable change is
the inclusion of PowerVR SGX GPU nodes on TI SoCs"

* tag 'soc-dt-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (824 commits)
riscv: dts: Move BUILTIN_DTB_SOURCE to common Kconfig
riscv: dts: starfive: jh7100: fix root clock names
ARM: dts: samsung: exynos4412: decrease memory to account for unusable region
arm64: dts: qcom: sm8250-xiaomi-elish: set rotation
arm64: dts: qcom: sm8650: Fix SPMI channels size
arm64: dts: qcom: sm8550: Fix SPMI channels size
arm64: dts: rockchip: Fix name for UART pin header on qnap-ts433
arm: dts: marvell: clearfog-gtr-l8: align port numbers with enclosure
arm: dts: marvell: clearfog-gtr-l8: add support for second sfp connector
dt-bindings: soc: renesas: renesas-soc: Add pattern for gray-hawk
dtc: Enable dtc interrupt_provider check
arm64: dts: st: add video encoder support to stm32mp255
arm64: dts: st: add video decoder support to stm32mp255
ARM: dts: stm32: enable crypto accelerator on stm32mp135f-dk
ARM: dts: stm32: enable CRC on stm32mp135f-dk
ARM: dts: stm32: add CRC on stm32mp131
ARM: dts: add stm32f769-disco-mb1166-reva09
ARM: dts: stm32: add display support on stm32f769-disco
ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f769-disco
ARM: dts: stm32: add DSI support on stm32f769
...

show more ...

Merge tag 'riscv-dt-fixes-for-v6.8-final' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt

RISC-V Devicetree fixes for v6.8-final

Starfive:
The previous cleanup broke boot

Merge tag 'riscv-dt-fixes-for-v6.8-final' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt

RISC-V Devicetree fixes for v6.8-final

Starfive:
The previous cleanup broke boot on the jh7100 as the driver depended on
the fallback clock name created based on the node-name when
clock-output-names is not present. Add clock-output-names to restore
working order.

Generic:
BUILTIN_DTB has been broken for ages on any platform other than the
nommu Canaan k210 SoC as the first dtb built (in alphanumerical order),
would get built into the image. This didn't get fixed for ages because
nobody actually cared about running it other than the k210 enough to
fix it. The folks doing Sophgo SG2042 development have come along and
fixed it, as they want to use builtin dtbs. linux-boot on that platform
reuses the dtb it was provided by OpenSBI when booting linux proper,
which is unfortunately not possible to boot a mainline kernel with.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

* tag 'riscv-dt-fixes-for-v6.8-final' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: Move BUILTIN_DTB_SOURCE to common Kconfig
riscv: dts: starfive: jh7100: fix root clock names

Link: https://lore.kernel.org/r/20240306-waltz-facial-9e4e1b792053@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

riscv: dts: Move BUILTIN_DTB_SOURCE to common Kconfig

The BUILTIN_DTB_SOURCE was only configured for K210 before. Since
SOC_BUILTIN_DTB_DECLARE was removed at commit d5805af9fe9f ("riscv: Fix
builti

riscv: dts: Move BUILTIN_DTB_SOURCE to common Kconfig

The BUILTIN_DTB_SOURCE was only configured for K210 before. Since
SOC_BUILTIN_DTB_DECLARE was removed at commit d5805af9fe9f ("riscv: Fix
builtin DTB handling") from patch [1], the kernel cannot choose one of the
dtbs from then on and always take the first one dtb to use. Then, another
commit 0ddd7eaffa64 ("riscv: Fix BUILTIN_DTB for sifive and microchip soc")
from patch [2] supports BUILTIN_DTB_SOURCE for other SoCs. However, this
feature will only work if the Kconfig we use links the dtb we expected in
the first place as mentioned in the thread [3]. Thus, a config
BUILTIN_DTB_SOURCE is needed for all SoCs to choose one dtb to use.

For some considerations, this patch also removes default y if XIP_KERNEL
for BUILTIN_DTB, as this requires setting a proper dtb to use on the
BUILTIN_DTB_SOURCE, else the kernel with XIP but does not set
BUILTIN_DTB_SOURCE or unselect BUILTIN_DTB will not boot.

Also, this patch removes the default dtb string for k210 from Kconfig to
nommu_k210_defconfig and nommu_k210_sdcard_defconfig to avoid complex
Kconfig settings for other SoCs in the future.

[1] https://lore.kernel.org/linux-riscv/20201208073355.40828-5-damien.lemoal@wdc.com/
[2] https://lore.kernel.org/linux-riscv/20210604120639.1447869-1-alex@ghiti.fr/
[3] https://lore.kernel.org/linux-riscv/CAK7LNATt_56mO2Le4v4EnPnAfd3gC8S_Sm5-GCsfa=qXy=8Lrg@mail.gmail.com/

Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

show more ...

Merge tag 'v6.8-rc4' into x86/percpu, to resolve conflicts and refresh the branch

Conflicts:
arch/x86/include/asm/percpu.h
arch/x86/include/asm/text-patching.h

Signed-off-by: Ingo Molnar <mingo@k

Merge tag 'v6.8-rc4' into x86/percpu, to resolve conflicts and refresh the branch

Conflicts:
arch/x86/include/asm/percpu.h
arch/x86/include/asm/text-patching.h

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge remote-tracking branch 'torvalds/master' into perf-tools-next

To pick up fixes that went thru perf-tools for v6.7 and to get in sync
with upstream to check for drift in the copies of headers,

Merge remote-tracking branch 'torvalds/master' into perf-tools-next

To pick up fixes that went thru perf-tools for v6.7 and to get in sync
with upstream to check for drift in the copies of headers, etc.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge drm/drm-next into drm-misc-next

Let's kickstart the v6.8 release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'tip/perf/urgent'

Avoid conflicts, base on fixes.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge branch 'next' into for-linus

Prepare input updates for 6.7 merge window.