Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge tag 'v6.10' into next

Sync up with mainline to bring in device_for_each_child_node_scoped()
and other newer APIs.

Merge branch 'next' into for-linus

Prepare input updates for 6.11 merge window.

Merge tag 'v6.9' into next

Sync up with the mainline to bring in the new cleanup API.

Merge drm-misc-next-2024-07-04 into drm-misc-next-fixes

Let's start the drm-misc-next-fixes cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync to v6.10-rc3.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-xe-next

Needed to get tracing cleanup and add mmio tracing series.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge remote-tracking branch 'drm-misc/drm-misc-next' into HEAD

Merge drm-misc-next tree into the msm-next tree in order to be able to
use HDMI connector framework for the MSM HDMI driver.

Merge drm/drm-next into drm-misc-next

Let's start the new release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'tip/x86/cpu'

The Lunarlake patches rely on the new VFM stuff.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge topic branches 'clkdev' and 'fixes' into for-linus

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

v6.10-rc1 is released, forward from v6.9

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Merge tag 'powerpc-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:

- Enable BPF Kernel Functions (kfuncs) in the powerpc BPF JIT.

Merge tag 'powerpc-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:

- Enable BPF Kernel Functions (kfuncs) in the powerpc BPF JIT.

- Allow per-process DEXCR (Dynamic Execution Control Register) settings
via prctl, notably NPHIE which controls hashst/hashchk for ROP
protection.

- Install powerpc selftests in sub-directories. Note this changes the
way run_kselftest.sh needs to be invoked for powerpc selftests.

- Change fadump (Firmware Assisted Dump) to better handle memory
add/remove.

- Add support for passing additional parameters to the fadump kernel.

- Add support for updating the kdump image on CPU/memory add/remove
events.

- Other small features, cleanups and fixes.

Thanks to Andrew Donnellan, Andy Shevchenko, Aneesh Kumar K.V, Arnd
Bergmann, Benjamin Gray, Bjorn Helgaas, Christian Zigotzky, Christophe
Jaillet, Christophe Leroy, Colin Ian King, Cédric Le Goater, Dr. David
Alan Gilbert, Erhard Furtner, Frank Li, GUO Zihua, Ganesh Goudar, Geoff
Levand, Ghanshyam Agrawal, Greg Kurz, Hari Bathini, Joel Stanley, Justin
Stitt, Kunwu Chan, Li Yang, Lidong Zhong, Madhavan Srinivasan, Mahesh
Salgaonkar, Masahiro Yamada, Matthias Schiffer, Naresh Kamboju, Nathan
Chancellor, Nathan Lynch, Naveen N Rao, Nicholas Miehlbradt, Ran Wang,
Randy Dunlap, Ritesh Harjani, Sachin Sant, Shirisha Ganta, Shrikanth
Hegde, Sourabh Jain, Stephen Rothwell, sundar, Thorsten Blum, Vaibhav
Jain, Xiaowei Bao, Yang Li, and Zhao Chenhui.

* tag 'powerpc-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (85 commits)
powerpc/fadump: Fix section mismatch warning
powerpc/85xx: fix compile error without CONFIG_CRASH_DUMP
powerpc/fadump: update documentation about bootargs_append
powerpc/fadump: pass additional parameters when fadump is active
powerpc/fadump: setup additional parameters for dump capture kernel
powerpc/pseries/fadump: add support for multiple boot memory regions
selftests/powerpc/dexcr: Fix spelling mistake "predicition" -> "prediction"
KVM: PPC: Book3S HV nestedv2: Fix an error handling path in gs_msg_ops_kvmhv_nestedv2_config_fill_info()
KVM: PPC: Fix documentation for ppc mmu caps
KVM: PPC: code cleanup for kvmppc_book3s_irqprio_deliver
KVM: PPC: Book3S HV nestedv2: Cancel pending DEC exception
powerpc/xmon: Check cpu id in commands "c#", "dp#" and "dx#"
powerpc/code-patching: Use dedicated memory routines for patching
powerpc/code-patching: Test patch_instructions() during boot
powerpc64/kasan: Pass virtual addresses to kasan_init_phys_region()
powerpc: rename SPRN_HID2 define to SPRN_HID2_750FX
powerpc: Fix typos
powerpc/eeh: Fix spelling of the word "auxillary" and update comment
macintosh/ams: Fix unused variable warning
powerpc/Makefile: Remove bits related to the previous use of -mcmodel=large
...

show more ...

Merge branch 'topic/kdump-hotplug' into next

Merge our topic branch containing kdump hotplug changes, more detail from the
original cover letter:

Commit 247262756121 ("crash: add generic infrastruc

Merge branch 'topic/kdump-hotplug' into next

Merge our topic branch containing kdump hotplug changes, more detail from the
original cover letter:

Commit 247262756121 ("crash: add generic infrastructure for crash
hotplug support") added a generic infrastructure that allows
architectures to selectively update the kdump image component during CPU
or memory add/remove events within the kernel itself.

This patch series adds crash hotplug handler for PowerPC and enable
support to update the kdump image on CPU/Memory add/remove events.

Among the 6 patches in this series, the first two patches make changes
to the generic crash hotplug handler to assist PowerPC in adding support
for this feature. The last four patches add support for this feature.

The following section outlines the problem addressed by this patch
series, along with the current solution, its shortcomings, and the
proposed resolution.

Problem:
========
Due to CPU/Memory hotplug or online/offline events the elfcorehdr
(which describes the CPUs and memory of the crashed kernel) and FDT
(Flattened Device Tree) of kdump image becomes outdated. Consequently,
attempting dump collection with an outdated elfcorehdr or FDT can lead
to failed or inaccurate dump collection.

Going forward CPU hotplug or online/offline events are referred as
CPU/Memory add/remove events.

Existing solution and its shortcoming:
======================================
The current solution to address the above issue involves monitoring the
CPU/memory add/remove events in userspace using udev rules and whenever
there are changes in CPU and memory resources, the entire kdump image
is loaded again. The kdump image includes kernel, initrd, elfcorehdr,
FDT, purgatory. Given that only elfcorehdr and FDT get outdated due to
CPU/Memory add/remove events, reloading the entire kdump image is
inefficient. More importantly, kdump remains inactive for a substantial
amount of time until the kdump reload completes.

Proposed solution:
==================
Instead of initiating a full kdump image reload from userspace on
CPU/Memory hotplug and online/offline events, the proposed solution aims
to update only the necessary kdump image component within the kernel
itself.

show more ...

powerpc/crash: remove unnecessary NULL check before kvfree()

Fix the following coccicheck build warning:

arch/powerpc/kexec/crash.c:488:2-8: WARNING: NULL check before some
freeing functions is not

powerpc/crash: remove unnecessary NULL check before kvfree()

Fix the following coccicheck build warning:

arch/powerpc/kexec/crash.c:488:2-8: WARNING: NULL check before some
freeing functions is not needed.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404261048.skfV5DDB-lkp@intel.com/
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240502182040.774759-1-sourabhjain@linux.ibm.com

show more ...

powerpc/crash: add crash memory hotplug support

Extend the arch crash hotplug handler, as introduced by the patch title
("powerpc: add crash CPU hotplug support"), to also support memory
add/remove

powerpc/crash: add crash memory hotplug support

Extend the arch crash hotplug handler, as introduced by the patch title
("powerpc: add crash CPU hotplug support"), to also support memory
add/remove events.

Elfcorehdr describes the memory of the crash kernel to capture the
kernel; hence, it needs to be updated if memory resources change due to
memory add/remove events. Therefore, arch_crash_handle_hotplug_event()
is updated to recreate the elfcorehdr and replace it with the previous
one on memory add/remove events.

The memblock list is used to prepare the elfcorehdr. In the case of
memory hot remove, the memblock list is updated after the arch crash
hotplug handler is triggered, as depicted in Figure 1. Thus, the
hot-removed memory is explicitly removed from the crash memory ranges
to ensure that the memory ranges added to elfcorehdr do not include the
hot-removed memory.

Memory remove
|
v
Offline pages
|
v
Initiate memory notify call <----> crash hotplug handler
chain for MEM_OFFLINE event
|
v
Update memblock list

Figure 1

There are two system calls, `kexec_file_load` and `kexec_load`, used to
load the kdump image. A few changes have been made to ensure that the
kernel can safely update the elfcorehdr component of the kdump image for
both system calls.

For the kexec_file_load syscall, kdump image is prepared in the kernel.
To support an increasing number of memory regions, the elfcorehdr is
built with extra buffer space to ensure that it can accommodate
additional memory ranges in future.

For the kexec_load syscall, the elfcorehdr is updated only if the
KEXEC_CRASH_HOTPLUG_SUPPORT kexec flag is passed to the kernel by the
kexec tool. Passing this flag to the kernel indicates that the
elfcorehdr is built to accommodate additional memory ranges and the
elfcorehdr segment is not considered for SHA calculation, making it safe
to update.

The changes related to this feature are kept under the CRASH_HOTPLUG
config, and it is enabled by default.

Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240326055413.186534-7-sourabhjain@linux.ibm.com

show more ...

powerpc/crash: add crash CPU hotplug support

Due to CPU/Memory hotplug or online/offline events, the elfcorehdr
(which describes the CPUs and memory of the crashed kernel) and FDT
(Flattened Device

powerpc/crash: add crash CPU hotplug support

Due to CPU/Memory hotplug or online/offline events, the elfcorehdr
(which describes the CPUs and memory of the crashed kernel) and FDT
(Flattened Device Tree) of kdump image becomes outdated. Consequently,
attempting dump collection with an outdated elfcorehdr or FDT can lead
to failed or inaccurate dump collection.

Going forward, CPU hotplug or online/offline events are referred as
CPU/Memory add/remove events.

The current solution to address the above issue involves monitoring the
CPU/Memory add/remove events in userspace using udev rules and whenever
there are changes in CPU and memory resources, the entire kdump image
is loaded again. The kdump image includes kernel, initrd, elfcorehdr,
FDT, purgatory. Given that only elfcorehdr and FDT get outdated due to
CPU/Memory add/remove events, reloading the entire kdump image is
inefficient. More importantly, kdump remains inactive for a substantial
amount of time until the kdump reload completes.

To address the aforementioned issue, commit 247262756121 ("crash: add
generic infrastructure for crash hotplug support") added a generic
infrastructure that allows architectures to selectively update the kdump
image component during CPU or memory add/remove events within the kernel
itself.

In the event of a CPU or memory add/remove events, the generic crash
hotplug event handler, `crash_handle_hotplug_event()`, is triggered. It
then acquires the necessary locks to update the kdump image and invokes
the architecture-specific crash hotplug handler,
`arch_crash_handle_hotplug_event()`, to update the required kdump image
components.

This patch adds crash hotplug handler for PowerPC and enable support to
update the kdump image on CPU add/remove events. Support for memory
add/remove events is added in a subsequent patch with the title
"powerpc: add crash memory hotplug support"

As mentioned earlier, only the elfcorehdr and FDT kdump image components
need to be updated in the event of CPU or memory add/remove events.
However, on PowerPC architecture crash hotplug handler only updates the
FDT to enable crash hotplug support for CPU add/remove events. Here's
why.

The elfcorehdr on PowerPC is built with possible CPUs, and thus, it does
not need an update on CPU add/remove events. On the other hand, the FDT
needs to be updated on CPU add events to include the newly added CPU. If
the FDT is not updated and the kernel crashes on a newly added CPU, the
kdump kernel will fail to boot due to the unavailability of the crashing
CPU in the FDT. During the early boot, it is expected that the boot CPU
must be a part of the FDT; otherwise, the kernel will raise a BUG and
fail to boot. For more information, refer to commit 36ae37e3436b0
("powerpc: Make boot_cpuid common between 32 and 64-bit"). Since it is
okay to have an offline CPU in the kdump FDT, no action is taken in case
of CPU removal.

There are two system calls, `kexec_file_load` and `kexec_load`, used to
load the kdump image. Few changes have been made to ensure kernel can
safely update the FDT of kdump image loaded using both system calls.

For kexec_file_load syscall the kdump image is prepared in kernel. So to
support an increasing number of CPUs, the FDT is constructed with extra
buffer space to ensure it can accommodate a possible number of CPU
nodes. Additionally, a call to fdt_pack (which trims the unused space
once the FDT is prepared) is avoided if this feature is enabled.

For the kexec_load syscall, the FDT is updated only if the
KEXEC_CRASH_HOTPLUG_SUPPORT kexec flag is passed to the kernel by
userspace (kexec tools). When userspace passes this flag to the kernel,
it indicates that the FDT is built to accommodate possible CPUs, and the
FDT segment is excluded from SHA calculation, making it safe to update.

The changes related to this feature are kept under the CRASH_HOTPLUG
config, and it is enabled by default.

Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240326055413.186534-6-sourabhjain@linux.ibm.com

show more ...

Merge drm/drm-next into drm-intel-gt-next

Work that needs to land in drm-intel-gt-next depends on two patches only
present in drm-intel-next, absence of which is causing a merge conflict:

3b918f4

Merge drm/drm-next into drm-intel-gt-next

Work that needs to land in drm-intel-gt-next depends on two patches only
present in drm-intel-next, absence of which is causing a merge conflict:

3b918f4f0c8b ("drm/i915/pxp: Optimize GET_PARAM:PXP_STATUS")
ac765b7018f6 ("drm/i915/pxp/mtl: intel_pxp_init_hw needs runtime-pm inside pm-complete")

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge branch 'linus' into smp/core

Pull in upstream to get the fixes so depending changes can be applied.

Merge drm/drm-next into drm-misc-next

Updating drm-misc-next to the state of Linux v6.6-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v6.6-rc4' into perf/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'v6.6-rc2' into locking/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync to v6.6-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'powerpc-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:

- Add HOTPLUG_SMT support (/sys/devices/system/cpu/smt) and hon

Merge tag 'powerpc-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:

- Add HOTPLUG_SMT support (/sys/devices/system/cpu/smt) and honour the
configured SMT state when hotplugging CPUs into the system

- Combine final TLB flush and lazy TLB mm shootdown IPIs when using the
Radix MMU to avoid a broadcast TLBIE flush on exit

- Drop the exclusion between ptrace/perf watchpoints, and drop the now
unused associated arch hooks

- Add support for the "nohlt" command line option to disable CPU idle

- Add support for -fpatchable-function-entry for ftrace, with GCC >=
13.1

- Rework memory block size determination, and support 256MB size on
systems with GPUs that have hotpluggable memory

- Various other small features and fixes

Thanks to Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira
Rajeev, Benjamin Gray, Christophe Leroy, Frederic Barrat, Gautam
Menghani, Geoff Levand, Hari Bathini, Immad Mir, Jialin Zhang, Joel
Stanley, Jordan Niethe, Justin Stitt, Kajol Jain, Kees Cook, Krzysztof
Kozlowski, Laurent Dufour, Liang He, Linus Walleij, Mahesh Salgaonkar,
Masahiro Yamada, Michal Suchanek, Nageswara R Sastry, Nathan Chancellor,
Nathan Lynch, Naveen N Rao, Nicholas Piggin, Nick Desaulniers, Omar
Sandoval, Randy Dunlap, Reza Arbab, Rob Herring, Russell Currey, Sourabh
Jain, Thomas Gleixner, Trevor Woerner, Uwe Kleine-König, Vaibhav Jain,
Xiongfeng Wang, Yuan Tan, Zhang Rui, and Zheng Zengkai.

* tag 'powerpc-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (135 commits)
macintosh/ams: linux/platform_device.h is needed
powerpc/xmon: Reapply "Relax frame size for clang"
powerpc/mm/book3s64: Use 256M as the upper limit with coherent device memory attached
powerpc/mm/book3s64: Fix build error with SPARSEMEM disabled
powerpc/iommu: Fix notifiers being shared by PCI and VIO buses
powerpc/mpc5xxx: Add missing fwnode_handle_put()
powerpc/config: Disable SLAB_DEBUG_ON in skiroot
powerpc/pseries: Remove unused hcall tracing instruction
powerpc/pseries: Fix hcall tracepoints with JUMP_LABEL=n
powerpc: dts: add missing space before {
powerpc/eeh: Use pci_dev_id() to simplify the code
powerpc/64s: Move CPU -mtune options into Kconfig
powerpc/powermac: Fix unused function warning
powerpc/pseries: Rework lppaca_shared_proc() to avoid DEBUG_PREEMPT
powerpc: Don't include lppaca.h in paca.h
powerpc/pseries: Move hcall_vphn() prototype into vphn.h
powerpc/pseries: Move VPHN constants into vphn.h
cxl: Drop unused detach_spa()
powerpc: Drop zalloc_maybe_bootmem()
powerpc/powernv: Use struct opal_prd_msg in more places
...

show more ...