#
3c09ec59 |
| 09-Dec-2020 |
Catalin Marinas <catalin.marinas@arm.com> |
Merge branches 'for-next/kvm-build-fix', 'for-next/va-refactor', 'for-next/lto', 'for-next/mem-hotplug', 'for-next/cppc-ffh', 'for-next/pad-image-header', 'for-next/zone-dma-default-32-bit', 'for-nex
Merge branches 'for-next/kvm-build-fix', 'for-next/va-refactor', 'for-next/lto', 'for-next/mem-hotplug', 'for-next/cppc-ffh', 'for-next/pad-image-header', 'for-next/zone-dma-default-32-bit', 'for-next/signal-tag-bits' and 'for-next/cmdline-extended' into for-next/core
* for-next/kvm-build-fix: : Fix KVM build issues with 64K pages KVM: arm64: Fix build error in user_mem_abort()
* for-next/va-refactor: : VA layout changes arm64: mm: don't assume struct page is always 64 bytes Documentation/arm64: fix RST layout of memory.rst arm64: mm: tidy up top of kernel VA space arm64: mm: make vmemmap region a projection of the linear region arm64: mm: extend linear region for 52-bit VA configurations
* for-next/lto: : Upgrade READ_ONCE() to RCpc acquire on arm64 with LTO arm64: lto: Strengthen READ_ONCE() to acquire when CONFIG_LTO=y arm64: alternatives: Remove READ_ONCE() usage during patch operation arm64: cpufeatures: Add capability for LDAPR instruction arm64: alternatives: Split up alternative.h arm64: uaccess: move uao_* alternatives to asm-uaccess.h
* for-next/mem-hotplug: : Memory hotplug improvements arm64/mm/hotplug: Ensure early memory sections are all online arm64/mm/hotplug: Enable MEM_OFFLINE event handling arm64/mm/hotplug: Register boot memory hot remove notifier earlier arm64: mm: account for hotplug memory when randomizing the linear region
* for-next/cppc-ffh: : Add CPPC FFH support using arm64 AMU counters arm64: abort counter_read_on_cpu() when irqs_disabled() arm64: implement CPPC FFH support using AMUs arm64: split counter validation function arm64: wrap and generalise counter read functions
* for-next/pad-image-header: : Pad Image header to 64KB and unmap it arm64: head: tidy up the Image header definition arm64/head: avoid symbol names pointing into first 64 KB of kernel image arm64: omit [_text, _stext) from permanent kernel mapping
* for-next/zone-dma-default-32-bit: : Default to 32-bit wide ZONE_DMA (previously reduced to 1GB for RPi4) of: unittest: Fix build on architectures without CONFIG_OF_ADDRESS mm: Remove examples from enum zone_type comment arm64: mm: Set ZONE_DMA size based on early IORT scan arm64: mm: Set ZONE_DMA size based on devicetree's dma-ranges of: unittest: Add test for of_dma_get_max_cpu_address() of/address: Introduce of_dma_get_max_cpu_address() arm64: mm: Move zone_dma_bits initialization into zone_sizes_init() arm64: mm: Move reserve_crashkernel() into mem_init() arm64: Force NO_BLOCK_MAPPINGS if crashkernel reservation is required arm64: Ignore any DMA offsets in the max_zone_phys() calculation
* for-next/signal-tag-bits: : Expose the FAR_EL1 tag bits in siginfo arm64: expose FAR_EL1 tag bits in siginfo signal: define the SA_EXPOSE_TAGBITS bit in sa_flags signal: define the SA_UNSUPPORTED bit in sa_flags arch: provide better documentation for the arch-specific SA_* flags signal: clear non-uapi flag bits when passing/returning sa_flags arch: move SA_* definitions to generic headers parisc: start using signal-defs.h parisc: Drop parisc special case for __sighandler_t
* for-next/cmdline-extended: : Add support for CONFIG_CMDLINE_EXTENDED arm64: Extend the kernel command line from the bootloader arm64: kaslr: Refactor early init command line parsing
show more ...
|
Revision tags: v5.10-rc7, v5.10-rc6 |
|
#
20c7775a |
| 26-Nov-2020 |
Peter Zijlstra <peterz@infradead.org> |
Merge remote-tracking branch 'origin/master' into perf/core
Further perf/core patches will depend on:
d3f7b1bb2040 ("mm/gup: fix gup_fast with dynamic page table folding")
which is already in Li
Merge remote-tracking branch 'origin/master' into perf/core
Further perf/core patches will depend on:
d3f7b1bb2040 ("mm/gup: fix gup_fast with dynamic page table folding")
which is already in Linus' tree.
show more ...
|
Revision tags: v5.10-rc5 |
|
#
05909cd9 |
| 18-Nov-2020 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge tag 'v5.9' into next
Sync up with mainline to bring in the latest DTS files.
|
Revision tags: v5.10-rc4, v5.10-rc3 |
|
#
666fab4a |
| 07-Nov-2020 |
Ingo Molnar <mingo@kernel.org> |
Merge branch 'linus' into perf/kprobes
Conflicts: include/asm-generic/atomic-instrumented.h kernel/kprobes.c
Use the upstream atomic-instrumented.h checksum, and pick the kprobes version of kerne
Merge branch 'linus' into perf/kprobes
Conflicts: include/asm-generic/atomic-instrumented.h kernel/kprobes.c
Use the upstream atomic-instrumented.h checksum, and pick the kprobes version of kernel/kprobes.c, which effectively reverts this upstream workaround:
645f224e7ba2: ("kprobes: Tell lockdep about kprobe nesting")
Since the new code *should* be fine without nesting.
Knock on wood ...
Signed-off-by: Ingo Molnar <mingo@kernel.org>
show more ...
|
#
5f8f9652 |
| 05-Nov-2020 |
Jani Nikula <jani.nikula@intel.com> |
Merge drm/drm-next into drm-intel-next-queued
Catch up with v5.10-rc2 and drm-misc-next.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
#
01be83ee |
| 04-Nov-2020 |
Thomas Gleixner <tglx@linutronix.de> |
Merge branch 'core/urgent' into core/entry
Pick up the entry fix before further modifications.
|
#
c489573b |
| 02-Nov-2020 |
Maxime Ripard <maxime@cerno.tech> |
Merge drm/drm-next into drm-misc-next
Daniel needs -rc2 in drm-misc-next to merge some patches
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
#
4f6b838c |
| 12-Nov-2020 |
Marc Zyngier <maz@kernel.org> |
Merge tag 'v5.10-rc1' into kvmarm-master/next
Linux 5.10-rc1
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
Revision tags: v5.10-rc2 |
|
#
4a95857a |
| 30-Oct-2020 |
Zhenyu Wang <zhenyuw@linux.intel.com> |
Merge tag 'drm-intel-fixes-2020-10-29' into gvt-fixes
Backmerge for 5.10-rc1 to apply one extra APL fix.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
#
f59cddd8 |
| 28-Oct-2020 |
Mark Brown <broonie@kernel.org> |
Merge tag 'v5.10-rc1' into regulator-5.10
Linux 5.10-rc1
|
#
3bfd5f42 |
| 28-Oct-2020 |
Mark Brown <broonie@kernel.org> |
Merge tag 'v5.10-rc1' into spi-5.10
Linux 5.10-rc1
|
#
ce038aea |
| 28-Oct-2020 |
Mark Brown <broonie@kernel.org> |
Merge tag 'v5.10-rc1' into asoc-5.10
Linux 5.10-rc1
|
Revision tags: v5.10-rc1 |
|
#
09a31a7e |
| 16-Oct-2020 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'mips_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- removed support for PNX833x alias NXT_STB22x
- included Ingenic So
Merge tag 'mips_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- removed support for PNX833x alias NXT_STB22x
- included Ingenic SoC support into generic MIPS kernels
- added support for new Ingenic SoCs
- converted workaround selection to use Kconfig
- replaced old boot mem functions by memblock_*
- enabled COP2 usage in kernel for Loongson64 to make use of 16byte load/stores possible
- cleanups and fixes
* tag 'mips_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (92 commits) MIPS: DEC: Restore bootmem reservation for firmware working memory area MIPS: dec: fix section mismatch bcm963xx_tag.h: fix duplicated word mips: ralink: enable zboot support MIPS: ingenic: Remove CPU_SUPPORTS_HUGEPAGES MIPS: cpu-probe: remove MIPS_CPU_BP_GHIST option bit MIPS: cpu-probe: introduce exclusive R3k CPU probe MIPS: cpu-probe: move fpu probing/handling into its own file MIPS: replace add_memory_region with memblock MIPS: Loongson64: Clean up numa.c MIPS: Loongson64: Select SMP in Kconfig to avoid build error mips: octeon: Add Ubiquiti E200 and E220 boards MIPS: SGI-IP28: disable use of ll/sc in kernel MIPS: tx49xx: move tx4939_add_memory_regions into only user MIPS: pgtable: Remove used PAGE_USERIO define MIPS: alchemy: Share prom_init implementation MIPS: alchemy: Fix build breakage, if TOUCHSCREEN_WM97XX is disabled MIPS: process: include exec.h header in process.c MIPS: process: Add prototype for function arch_dup_task_struct MIPS: idle: Add prototype for function check_wait ...
show more ...
|
Revision tags: v5.9, v5.9-rc8, v5.9-rc7, v5.9-rc6 |
|
#
5fa1f768 |
| 17-Sep-2020 |
Tiezhu Yang <yangtiezhu@loongson.cn> |
MIPS: Loongson64: Add UART node for LS7A PCH
When I update the latest kernel on the Loongson platform used with LS7A bridge chip, the serial console has no output, this is because the machine uses L
MIPS: Loongson64: Add UART node for LS7A PCH
When I update the latest kernel on the Loongson platform used with LS7A bridge chip, the serial console has no output, this is because the machine uses LS7A UART0 instead of CPU UART0, add UART node for LS7A PCH to enhance the compatibility.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
show more ...
|
Revision tags: v5.9-rc5 |
|
#
0ea8a56d |
| 12-Sep-2020 |
Rodrigo Vivi <rodrigo.vivi@intel.com> |
Merge drm/drm-next into drm-intel-next-queued
Sync drm-intel-gt-next here so we can have an unified fixes flow.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
#
9ddb236f |
| 09-Sep-2020 |
Takashi Iwai <tiwai@suse.de> |
Merge branch 'for-linus' into for-next
Back-merge to apply the tasklet conversion patches that are based on the already applied tasklet API changes on 5.9-rc4.
Signed-off-by: Takashi Iwai <tiwai@su
Merge branch 'for-linus' into for-next
Back-merge to apply the tasklet conversion patches that are based on the already applied tasklet API changes on 5.9-rc4.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
show more ...
|
Revision tags: v5.9-rc4 |
|
#
6bde8ef5 |
| 02-Sep-2020 |
Takashi Iwai <tiwai@suse.de> |
Merge branch 'topic/tasklet-convert' into for-linus
Pull tasklet API conversions.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
#
ead5d1f4 |
| 01-Sep-2020 |
Jiri Kosina <jkosina@suse.cz> |
Merge branch 'master' into for-next
Sync with Linus' branch in order to be able to apply fixups of more recent patches.
|
Revision tags: v5.9-rc3 |
|
#
3bec5b6a |
| 25-Aug-2020 |
Mark Brown <broonie@kernel.org> |
Merge tag 'v5.9-rc2' into regulator-5.9
Linux 5.9-rc2
|
#
1959ba4e |
| 25-Aug-2020 |
Mark Brown <broonie@kernel.org> |
Merge tag 'v5.9-rc2' into asoc-5.9
Linux 5.9-rc2
|
#
2d9ad4cf |
| 25-Aug-2020 |
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> |
Merge tag 'v5.9-rc2' into drm-misc-fixes
Backmerge requested by Tomi for a fix to omap inconsistent locking state issue, and because we need at least v5.9-rc2 now.
Signed-off-by: Maarten Lankhorst
Merge tag 'v5.9-rc2' into drm-misc-fixes
Backmerge requested by Tomi for a fix to omap inconsistent locking state issue, and because we need at least v5.9-rc2 now.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
show more ...
|
Revision tags: v5.9-rc2 |
|
#
d85ddd13 |
| 18-Aug-2020 |
Maxime Ripard <maxime@cerno.tech> |
Merge v5.9-rc1 into drm-misc-next
Sam needs 5.9-rc1 to have dev_err_probe in to merge some patches.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
Revision tags: v5.9-rc1 |
|
#
b62e4197 |
| 06-Aug-2020 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'mips_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS upates from Thomas Bogendoerfer:
- improvements for Loongson64
- extended ingenic support
- removal o
Merge tag 'mips_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS upates from Thomas Bogendoerfer:
- improvements for Loongson64
- extended ingenic support
- removal of not maintained paravirt system type
- cleanups and fixes
* tag 'mips_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (81 commits) MIPS: SGI-IP27: always enable NUMA in Kconfig MAINTAINERS: Update KVM/MIPS maintainers MIPS: Update default config file for Loongson-3 MIPS: KVM: Add kvm guest support for Loongson-3 dt-bindings: mips: Document Loongson kvm guest board MIPS: handle Loongson-specific GSExc exception MIPS: add definitions for Loongson-specific CP0.Diag1 register MIPS: only register FTLBPar exception handler for supported models MIPS: ingenic: Hardcode mem size for qi,lb60 board MIPS: DTS: ingenic/qi,lb60: Add model and memory node MIPS: ingenic: Use fw_passed_dtb even if CONFIG_BUILTIN_DTB MIPS: head.S: Init fw_passed_dtb to builtin DTB of: address: Fix parser address/size cells initialization of_address: Guard of_bus_pci_get_flags with CONFIG_PCI MIPS: DTS: Fix number of msi vectors for Loongson64G MIPS: Loongson64: Add ISA node for LS7A PCH MIPS: Loongson64: DTS: Fix ISA and PCI I/O ranges for RS780E PCH MIPS: Loongson64: Enlarge IO_SPACE_LIMIT MIPS: Loongson64: Process ISA Node in DeviceTree of_address: Add bus type match for pci ranges parser ...
show more ...
|
Revision tags: v5.8 |
|
#
b91aff3b |
| 28-Jul-2020 |
Jiaxun Yang <jiaxun.yang@flygoat.com> |
MIPS: Loongson64: Add ISA node for LS7A PCH
Although currently we're not enabling any ISA device in devicetree, but this node is required to express the ranges of address reserved for ISA.
Signed-o
MIPS: Loongson64: Add ISA node for LS7A PCH
Although currently we're not enabling any ISA device in devicetree, but this node is required to express the ranges of address reserved for ISA.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
show more ...
|
Revision tags: v5.8-rc7, v5.8-rc6, v5.8-rc5 |
|
#
24af1059 |
| 09-Jul-2020 |
Jiaxun Yang <jiaxun.yang@flygoat.com> |
MIPS: Loongson64: DeviceTree for LS7A PCH
Add DeviceTree files for Classic Loongson64 Quad Core + LS7A boards and Generic Loongson64 Quad Core + LS7A boards.
Signed-off-by: Huacai Chen <chenhc@lemo
MIPS: Loongson64: DeviceTree for LS7A PCH
Add DeviceTree files for Classic Loongson64 Quad Core + LS7A boards and Generic Loongson64 Quad Core + LS7A boards.
Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Tested-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
show more ...
|