Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge branch 'ib/6.11-rc6-matrix-keypad-spitz' into next

Bring in changes removing support for platform data from matrix-keypad
driver.

Merge tag 'v6.11-rc1' into clk-meson-next

Linux 6.11-rc1

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be a

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be able to be mapped at the address specified by the "reserve_mem" command
line parameter.

Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

show more ...

Merge tag 'v6.11-rc1' into for-6.12

Linux 6.11-rc1

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter and allows further pending refactors.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Get drm-misc-next to the state of v6.11-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Sync with v6.11-rc1 in general, and specifically get the new
BACKLIGHT_POWER_ constants for power states.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'linus' into x86/mm

Bring x86 and selftests up to date

Merge drm/drm-fixes into drm-misc-fixes

Let's start the new drm-misc-fixes cycle by bringing in 6.11-rc1.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'mips_6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Thomas Bogendoerfer:

- add support for Realtek RTL9302C

- add support for Mobileye EyeQ6H

Merge tag 'mips_6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Thomas Bogendoerfer:

- add support for Realtek RTL9302C

- add support for Mobileye EyeQ6H

- add support for Mobileye EyeQ OLB system controller

- improve r4k clocksource

- add mode for emulating ieee754 NAN2008

- rework for BMIPS CBR address handling

- fixes for Loongson 2K1000

- defconfig updates

- cleanups and fixes

* tag 'mips_6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (58 commits)
MIPS: config: Add ip30_defconfig
MIPS: config: lemote2f: Regenerate defconfig
MIPS: config: generic: Add board-litex
MIPS: config: Enable MSA and virtualization for MIPS64R6
MIPS: Fix fallback march for SB1
mips: dts: realtek: Add RTL9302C board
mips: generic: add fdt fixup for Realtek reference board
mips: select REALTEK_OTTO_TIMER for Realtek platforms
dt-bindings: interrupt-controller: realtek,rtl-intc: Add rtl9300-intc
dt-bindings: mips: realtek: Add rtl930x-soc compatible
dt-bindings: vendor-prefixes: Add Cameo Communications
mips: dts: realtek: add device_type property to cpu node
mips: dts: realtek: use "serial" instead of "uart" in node name
MIPS: Implement ieee754 NAN2008 emulation mode
MIPS: lantiq: improve USB initialization
MIPS: GIC: Generate redirect block accessors
MIPS: CPS: Add a couple of multi-cluster utility functions
MIPS: Octeron: remove source file executable bit
MAINTAINERS: Mobileye: add OLB drivers and dt-bindings
MIPS: mobileye: eyeq5: add OLB system-controller node
...

show more ...

mips: bmips: setup: make CBR address configurable

Add support to provide CBR address from DT to handle broken
SoC/Bootloader that doesn't correctly init it. This permits to use the
RAC flush even in

mips: bmips: setup: make CBR address configurable

Add support to provide CBR address from DT to handle broken
SoC/Bootloader that doesn't correctly init it. This permits to use the
RAC flush even in these condition.

To provide a CBR address from DT, the property "brcm,bmips-cbr-reg"
needs to be set in the "cpus" node. On DT init, this property presence
will be checked and will set the bmips_cbr_addr value accordingly. Also
bmips_rac_flush_disable will be set to false as RAC flush can be
correctly supported.

The CBR address from DT will overwrite the cached one and the
one set in the CBR register will be ignored.

Also the DT CBR address is validated on being outside DRAM window.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

show more ...

mips: bmips: rework and cache CBR addr handling

Rework the handling of the CBR address and cache it. This address
doesn't change and can be cached instead of reading the register every
time.

This i

mips: bmips: rework and cache CBR addr handling

Rework the handling of the CBR address and cache it. This address
doesn't change and can be cached instead of reading the register every
time.

This is in preparation of permitting to tweak the CBR address in DT with
broken SoC or bootloader.

bmips_cbr_addr is defined in setup.c for each arch to keep compatibility
with legacy brcm47xx/brcm63xx and generic BMIPS target.

Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.11 merge window.

Merge tag 'v6.9' into next

Sync up with the mainline to bring in the new cleanup API.

Merge drm/drm-next into drm-intel-gt-next

Some display refactoring patches are needed in order to allow conflict-
less merging.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

Merge drm/drm-next into drm-intel-next

Sync to get the drm_printer changes to drm-intel-next.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge 6.8-rc3 into tty-next

We need the tty/serial fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 6.8-rc3 into usb-next

We need the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'v6.8-rc2'

Linux 6.8-rc2

The vb2 fixes from v6.8-rc2 are needed for the work on the new
vb2 delete buffers feature.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

Merge branch 'for-6.9/amd-sfh' into for-linus

- assorted fixes and optimizations for amd-sfh (Basavaraj Natikar)

Signed-off-by: Jiri Kosina <jkosina@suse.com>

Merge branch 'for-linus' into for-next

Pull the latest 6.8 stuff into devel branch for further development.
Fixed the trivial merge conflict for HD-audio Realtek stuff.

Signed-off-by: Takashi Iwai

Merge branch 'for-linus' into for-next

Pull the latest 6.8 stuff into devel branch for further development.
Fixed the trivial merge conflict for HD-audio Realtek stuff.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

soundwire/SOF: add SoundWire Interface support for

Merge series from Vijendar Mukunda <Vijendar.Mukunda@amd.com>:

This patch series is to redesign existing platform device creation logic
for SoundW

soundwire/SOF: add SoundWire Interface support for

Merge series from Vijendar Mukunda <Vijendar.Mukunda@amd.com>:

This patch series is to redesign existing platform device creation logic
for SoundWire managers and Implement generic functions for SoundWire
manager probe, start and exit sequence which are common for both Legacy
(NO DSP enabled) and SOF stack, and add SoundWire Interface support for
AMD SOF stack (ACP 6.3 based platform).

The patch series was reviewed in
https://github.com/thesofproject/linux/pull/4699

show more ...

Merge drm/drm-next into drm-xe-next

Bring changes from drm-misc-next that got merged in drm-next back to
drm-xe so they can be used for additional features.

Signed-off-by: Lucas De Marchi <lucas.de

Merge drm/drm-next into drm-xe-next

Bring changes from drm-misc-next that got merged in drm-next back to
drm-xe so they can be used for additional features.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

show more ...

regulator: Merge up v6.8-rc5

There are dependencies on the PWM fixes for some new work on the PWM
driver.