Merge tag 'asoc-fix-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.12

A bunch of fixes here that came in during the merge window and t

Merge tag 'asoc-fix-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.12

A bunch of fixes here that came in during the merge window and the first
week of release, plus some new quirks and device IDs. There's nothing
major here, it's a bit bigger than it might've been due to there being
no fixes sent during the merge window due to your vacation.

show more ...

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Required for a panthor fix that broke when
FOP_UNSIGNED_OFFSET was added in place of FMODE_UNSIGNED_OFFSET.

Signed-off-by: Maarten L

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Required for a panthor fix that broke when
FOP_UNSIGNED_OFFSET was added in place of FMODE_UNSIGNED_OFFSET.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

No conflicts and no adjacent changes.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge tag 'v6.10' into next

Sync up with mainline to bring in device_for_each_child_node_scoped()
and other newer APIs.

Merge tag 'for-linus-non-x86' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm updates from Paolo Bonzini:
"These are the non-x86 changes (mostly ARM, as is usually the case).
The generic an

Merge tag 'for-linus-non-x86' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm updates from Paolo Bonzini:
"These are the non-x86 changes (mostly ARM, as is usually the case).
The generic and x86 changes will come later"

ARM:

- New Stage-2 page table dumper, reusing the main ptdump
infrastructure

- FP8 support

- Nested virtualization now supports the address translation
(FEAT_ATS1A) family of instructions

- Add selftest checks for a bunch of timer emulation corner cases

- Fix multiple cases where KVM/arm64 doesn't correctly handle the
guest trying to use a GICv3 that wasn't advertised

- Remove REG_HIDDEN_USER from the sysreg infrastructure, making
things little simpler

- Prevent MTE tags being restored by userspace if we are actively
logging writes, as that's a recipe for disaster

- Correct the refcount on a page that is not considered for MTE tag
copying (such as a device)

- When walking a page table to split block mappings, synchronize only
at the end the walk rather than on every store

- Fix boundary check when transfering memory using FFA

- Fix pKVM TLB invalidation, only affecting currently out of tree
code but worth addressing for peace of mind

LoongArch:

- Revert qspinlock to test-and-set simple lock on VM.

- Add Loongson Binary Translation extension support.

- Add PMU support for guest.

- Enable paravirt feature control from VMM.

- Implement function kvm_para_has_feature().

RISC-V:

- Fix sbiret init before forwarding to userspace

- Don't zero-out PMU snapshot area before freeing data

- Allow legacy PMU access from guest

- Fix to allow hpmcounter31 from the guest"

* tag 'for-linus-non-x86' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (64 commits)
LoongArch: KVM: Implement function kvm_para_has_feature()
LoongArch: KVM: Enable paravirt feature control from VMM
LoongArch: KVM: Add PMU support for guest
KVM: arm64: Get rid of REG_HIDDEN_USER visibility qualifier
KVM: arm64: Simplify visibility handling of AArch32 SPSR_*
KVM: arm64: Simplify handling of CNTKCTL_EL12
LoongArch: KVM: Add vm migration support for LBT registers
LoongArch: KVM: Add Binary Translation extension support
LoongArch: KVM: Add VM feature detection function
LoongArch: Revert qspinlock to test-and-set simple lock on VM
KVM: arm64: Register ptdump with debugfs on guest creation
arm64: ptdump: Don't override the level when operating on the stage-2 tables
arm64: ptdump: Use the ptdump description from a local context
arm64: ptdump: Expose the attribute parsing functionality
KVM: arm64: Add memory length checks and remove inline in do_ffa_mem_xfer
KVM: arm64: Move pagetable definitions to common header
KVM: arm64: nv: Add support for FEAT_ATS1A
KVM: arm64: nv: Plumb handling of AT S1* traps from EL2
KVM: arm64: nv: Make AT+PAN instructions aware of FEAT_PAN3
KVM: arm64: nv: Sanitise SCTLR_EL1.EPAN according to VM configuration
...

show more ...

Merge tag 'loongarch-kvm-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD

LoongArch KVM changes for v6.12

1. Revert qspinlock to test-and-set simple lock o

Merge tag 'loongarch-kvm-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD

LoongArch KVM changes for v6.12

1. Revert qspinlock to test-and-set simple lock on VM.
2. Add Loongson Binary Translation extension support.
3. Add PMU support for guest.
4. Enable paravirt feature control from VMM.
5. Implement function kvm_para_has_feature().

show more ...

LoongArch: KVM: Enable paravirt feature control from VMM

Export kernel paravirt features to user space, so that VMM can control
each single paravirt feature. By default paravirt features will be the

LoongArch: KVM: Enable paravirt feature control from VMM

Export kernel paravirt features to user space, so that VMM can control
each single paravirt feature. By default paravirt features will be the
same with kvm supported features if VMM does not set it.

Also a new feature KVM_FEATURE_VIRT_EXTIOI is added which can be set
from user space. This feature indicates that the virt EIOINTC can route
interrupts to 256 vCPUs, rather than 4 vCPUs like with real HW.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

show more ...

LoongArch: KVM: Add PMU support for guest

On LoongArch, the host and guest have their own PMU CSRs registers and
they share PMU hardware resources. A set of PMU CSRs consists of a CTRL
register and

LoongArch: KVM: Add PMU support for guest

On LoongArch, the host and guest have their own PMU CSRs registers and
they share PMU hardware resources. A set of PMU CSRs consists of a CTRL
register and a CNTR register. We can set which PMU CSRs are used by the
guest by writing to the GCFG register [24:26] bits.

On KVM side:
- Save the host PMU CSRs into structure kvm_context.
- If the host supports the PMU feature.
- When entering guest mode, save the host PMU CSRs and restore the guest PMU CSRs.
- When exiting guest mode, save the guest PMU CSRs and restore the host PMU CSRs.

Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

show more ...

LoongArch: KVM: Add VM feature detection function

Loongson SIMD Extension (LSX), Loongson Advanced SIMD Extension (LASX)
and Loongson Binary Translation (LBT) features are defined in register
CPUCFG

LoongArch: KVM: Add VM feature detection function

Loongson SIMD Extension (LSX), Loongson Advanced SIMD Extension (LASX)
and Loongson Binary Translation (LBT) features are defined in register
CPUCFG2. Two kinds of LSX/LASX/LBT feature detection are added here, one
is VCPU feature, and the other is VM feature. VCPU feature dection can
only work with VCPU thread itself, and requires VCPU thread is created
already. So LSX/LASX/LBT feature detection for VM is added also, it can
be done even if VM is not created, and also can be done by any threads
besides VCPU threads.

Here ioctl command KVM_HAS_DEVICE_ATTR is added for VM, and macro
KVM_LOONGARCH_VM_FEAT_CTRL is added to check supported feature. And
five sub-features relative with LSX/LASX/LBT are added as following:
KVM_LOONGARCH_VM_FEAT_LSX
KVM_LOONGARCH_VM_FEAT_LASX
KVM_LOONGARCH_VM_FEAT_X86BT
KVM_LOONGARCH_VM_FEAT_ARMBT
KVM_LOONGARCH_VM_FEAT_MIPSBT

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.11 merge window.

Merge tag 'v6.9' into next

Sync up with the mainline to bring in the new cleanup API.

Merge drm-misc-next-2024-07-04 into drm-misc-next-fixes

Let's start the drm-misc-next-fixes cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync to v6.10-rc3.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-xe-next

Needed to get tracing cleanup and add mmio tracing series.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge remote-tracking branch 'drm-misc/drm-misc-next' into HEAD

Merge drm-misc-next tree into the msm-next tree in order to be able to
use HDMI connector framework for the MSM HDMI driver.

Merge drm/drm-next into drm-misc-next

Let's start the new release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-gt-next

Some display refactoring patches are needed in order to allow conflict-
less merging.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

Merge branch 'tip/x86/cpu'

The Lunarlake patches rely on the new VFM stuff.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge topic branches 'clkdev' and 'fixes' into for-linus

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

v6.10-rc1 is released, forward from v6.9

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
"ARM:

- Move a lot of state that was previously stored on a per vcpu basis
into a pe

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
"ARM:

- Move a lot of state that was previously stored on a per vcpu basis
into a per-CPU area, because it is only pertinent to the host while
the vcpu is loaded. This results in better state tracking, and a
smaller vcpu structure.

- Add full handling of the ERET/ERETAA/ERETAB instructions in nested
virtualisation. The last two instructions also require emulating
part of the pointer authentication extension. As a result, the trap
handling of pointer authentication has been greatly simplified.

- Turn the global (and not very scalable) LPI translation cache into
a per-ITS, scalable cache, making non directly injected LPIs much
cheaper to make visible to the vcpu.

- A batch of pKVM patches, mostly fixes and cleanups, as the
upstreaming process seems to be resuming. Fingers crossed!

- Allocate PPIs and SGIs outside of the vcpu structure, allowing for
smaller EL2 mapping and some flexibility in implementing more or
less than 32 private IRQs.

- Purge stale mpidr_data if a vcpu is created after the MPIDR map has
been created.

- Preserve vcpu-specific ID registers across a vcpu reset.

- Various minor cleanups and improvements.

LoongArch:

- Add ParaVirt IPI support

- Add software breakpoint support

- Add mmio trace events support

RISC-V:

- Support guest breakpoints using ebreak

- Introduce per-VCPU mp_state_lock and reset_cntx_lock

- Virtualize SBI PMU snapshot and counter overflow interrupts

- New selftests for SBI PMU and Guest ebreak

- Some preparatory work for both TDX and SNP page fault handling.

This also cleans up the page fault path, so that the priorities of
various kinds of fauls (private page, no memory, write to read-only
slot, etc.) are easier to follow.

x86:

- Minimize amount of time that shadow PTEs remain in the special
REMOVED_SPTE state.

This is a state where the mmu_lock is held for reading but
concurrent accesses to the PTE have to spin; shortening its use
allows other vCPUs to repopulate the zapped region while the zapper
finishes tearing down the old, defunct page tables.

- Advertise the max mappable GPA in the "guest MAXPHYADDR" CPUID
field, which is defined by hardware but left for software use.

This lets KVM communicate its inability to map GPAs that set bits
51:48 on hosts without 5-level nested page tables. Guest firmware
is expected to use the information when mapping BARs; this avoids
that they end up at a legal, but unmappable, GPA.

- Fixed a bug where KVM would not reject accesses to MSR that aren't
supposed to exist given the vCPU model and/or KVM configuration.

- As usual, a bunch of code cleanups.

x86 (AMD):

- Implement a new and improved API to initialize SEV and SEV-ES VMs,
which will also be extendable to SEV-SNP.

The new API specifies the desired encryption in KVM_CREATE_VM and
then separately initializes the VM. The new API also allows
customizing the desired set of VMSA features; the features affect
the measurement of the VM's initial state, and therefore enabling
them cannot be done tout court by the hypervisor.

While at it, the new API includes two bugfixes that couldn't be
applied to the old one without a flag day in userspace or without
affecting the initial measurement. When a SEV-ES VM is created with
the new VM type, KVM_GET_REGS/KVM_SET_REGS and friends are rejected
once the VMSA has been encrypted. Also, the FPU and AVX state will
be synchronized and encrypted too.

- Support for GHCB version 2 as applicable to SEV-ES guests.

This, once more, is only accessible when using the new
KVM_SEV_INIT2 flow for initialization of SEV-ES VMs.

x86 (Intel):

- An initial bunch of prerequisite patches for Intel TDX were merged.

They generally don't do anything interesting. The only somewhat
user visible change is a new debugging mode that checks that KVM's
MMU never triggers a #VE virtualization exception in the guest.

- Clear vmcs.EXIT_QUALIFICATION when synthesizing an EPT Misconfig
VM-Exit to L1, as per the SDM.

Generic:

- Use vfree() instead of kvfree() for allocations that always use
vcalloc() or __vcalloc().

- Remove .change_pte() MMU notifier - the changes to non-KVM code are
small and Andrew Morton asked that I also take those through the
KVM tree.

The callback was only ever implemented by KVM (which was also the
original user of MMU notifiers) but it had been nonfunctional ever
since calls to set_pte_at_notify were wrapped with
invalidate_range_start and invalidate_range_end... in 2012.

Selftests:

- Enhance the demand paging test to allow for better reporting and
stressing of UFFD performance.

- Convert the steal time test to generate TAP-friendly output.

- Fix a flaky false positive in the xen_shinfo_test due to comparing
elapsed time across two different clock domains.

- Skip the MONITOR/MWAIT test if the host doesn't actually support
MWAIT.

- Avoid unnecessary use of "sudo" in the NX hugepage test wrapper
shell script, to play nice with running in a minimal userspace
environment.

- Allow skipping the RSEQ test's sanity check that the vCPU was able
to complete a reasonable number of KVM_RUNs, as the assert can fail
on a completely valid setup.

If the test is run on a large-ish system that is otherwise idle,
and the test isn't affined to a low-ish number of CPUs, the vCPU
task can be repeatedly migrated to CPUs that are in deep sleep
states, which results in the vCPU having very little net runtime
before the next migration due to high wakeup latencies.

- Define _GNU_SOURCE for all selftests to fix a warning that was
introduced by a change to kselftest_harness.h late in the 6.9
cycle, and because forcing every test to #define _GNU_SOURCE is
painful.

- Provide a global pseudo-RNG instance for all tests, so that library
code can generate random, but determinstic numbers.

- Use the global pRNG to randomly force emulation of select writes
from guest code on x86, e.g. to help validate KVM's emulation of
locked accesses.

- Allocate and initialize x86's GDT, IDT, TSS, segments, and default
exception handlers at VM creation, instead of forcing tests to
manually trigger the related setup.

Documentation:

- Fix a goof in the KVM_CREATE_GUEST_MEMFD documentation"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (225 commits)
selftests/kvm: remove dead file
KVM: selftests: arm64: Test vCPU-scoped feature ID registers
KVM: selftests: arm64: Test that feature ID regs survive a reset
KVM: selftests: arm64: Store expected register value in set_id_regs
KVM: selftests: arm64: Rename helper in set_id_regs to imply VM scope
KVM: arm64: Only reset vCPU-scoped feature ID regs once
KVM: arm64: Reset VM feature ID regs from kvm_reset_sys_regs()
KVM: arm64: Rename is_id_reg() to imply VM scope
KVM: arm64: Destroy mpidr_data for 'late' vCPU creation
KVM: arm64: Use hVHE in pKVM by default on CPUs with VHE support
KVM: arm64: Fix hvhe/nvhe early alias parsing
KVM: SEV: Allow per-guest configuration of GHCB protocol version
KVM: SEV: Add GHCB handling for termination requests
KVM: SEV: Add GHCB handling for Hypervisor Feature Support requests
KVM: SEV: Add support to handle AP reset MSR protocol
KVM: x86: Explicitly zero kvm_caps during vendor module load
KVM: x86: Fully re-initialize supported_mce_cap on vendor module load
KVM: x86: Fully re-initialize supported_vm_types on vendor module load
KVM: x86/mmu: Sanity check that __kvm_faultin_pfn() doesn't create noslot pfns
KVM: x86/mmu: Initialize kvm_page_fault's pfn and hva to error values
...

show more ...

Merge tag 'loongarch-kvm-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD

LoongArch KVM changes for v6.10

1. Add ParaVirt IPI support.
2. Add software brea

Merge tag 'loongarch-kvm-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD

LoongArch KVM changes for v6.10

1. Add ParaVirt IPI support.
2. Add software breakpoint support.
3. Add mmio trace events support.

show more ...

LoongArch: KVM: Add software breakpoint support

When VM runs in kvm mode, system will not exit to host mode when
executing a general software breakpoint instruction such as INSN_BREAK,
trap exceptio

LoongArch: KVM: Add software breakpoint support

When VM runs in kvm mode, system will not exit to host mode when
executing a general software breakpoint instruction such as INSN_BREAK,
trap exception happens in guest mode rather than host mode. In order to
debug guest kernel on host side, one mechanism should be used to let VM
exit to host mode.

Here a hypercall instruction with a special code is used for software
breakpoint usage. VM exits to host mode and kvm hypervisor identifies
the special hypercall code and sets exit_reason with KVM_EXIT_DEBUG. And
then let qemu handle it.

Idea comes from ppc kvm, one api KVM_REG_LOONGARCH_DEBUG_INST is added
to get the hypercall code. VMM needs get sw breakpoint instruction with
this api and set the corresponding sw break point for guest kernel.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

show more ...

LoongArch: KVM: Add vcpu mapping from physical cpuid

Physical CPUID is used for interrupt routing for irqchips such as ipi,
msgint and eiointc interrupt controllers. Physical CPUID is stored at
the

LoongArch: KVM: Add vcpu mapping from physical cpuid

Physical CPUID is used for interrupt routing for irqchips such as ipi,
msgint and eiointc interrupt controllers. Physical CPUID is stored at
the CSR register LOONGARCH_CSR_CPUID, it can not be changed once vcpu
is created and the physical CPUIDs of two vcpus cannot be the same.

Different irqchips have different size declaration about physical CPUID,
the max CPUID value for CSR LOONGARCH_CSR_CPUID on Loongson-3A5000 is
512, the max CPUID supported by IPI hardware is 1024, while for eiointc
irqchip is 256, and for msgint irqchip is 65536.

The smallest value from all interrupt controllers is selected now, and
the max cpuid size is defines as 256 by KVM which comes from the eiointc
irqchip.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

show more ...