Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge branch 'ib/6.11-rc6-matrix-keypad-spitz' into next

Bring in changes removing support for platform data from matrix-keypad
driver.

Merge tag 'v6.10' into next

Sync up with mainline to bring in device_for_each_child_node_scoped()
and other newer APIs.

Merge tag 'v6.11-rc1' into clk-meson-next

Linux 6.11-rc1

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be a

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be able to be mapped at the address specified by the "reserve_mem" command
line parameter.

Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

show more ...

Merge tag 'v6.11-rc1' into for-6.12

Linux 6.11-rc1

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter and allows further pending refactors.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Get drm-misc-next to the state of v6.11-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Sync with v6.11-rc1 in general, and specifically get the new
BACKLIGHT_POWER_ constants for power states.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'linus' into x86/mm

Bring x86 and selftests up to date

Merge drm/drm-fixes into drm-misc-fixes

Let's start the new drm-misc-fixes cycle by bringing in 6.11-rc1.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'next' into for-linus

Prepare input updates for 6.11 merge window.

Merge tag 'v6.9' into next

Sync up with the mainline to bring in the new cleanup API.

Merge drm-misc-next-2024-07-04 into drm-misc-next-fixes

Let's start the drm-misc-next-fixes cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync to v6.10-rc3.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-xe-next

Needed to get tracing cleanup and add mmio tracing series.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge remote-tracking branch 'drm-misc/drm-misc-next' into HEAD

Merge drm-misc-next tree into the msm-next tree in order to be able to
use HDMI connector framework for the MSM HDMI driver.

Merge drm/drm-next into drm-misc-next

Let's start the new release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-gt-next

Some display refactoring patches are needed in order to allow conflict-
less merging.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

Merge tag 'soc-dt-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC dt updates from Arnd Bergmann:
"The devicetree updates are fairly well spread out across platforms,
with

Merge tag 'soc-dt-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC dt updates from Arnd Bergmann:
"The devicetree updates are fairly well spread out across platforms,
with Qualcomm making up about a third of the total.

There are three new SoCs in existing product families this:

- NXP i.MX95 is a variant of i.MX93, now with six Cortex-A55 cores
instead of just two as well as a GPU and more high-speed I/O
devices.

- Qualcomm QCS8550 is a variant of SM8550 for IOT devices

- Airoha EN7581 is a 10G-PON network chip and related to the MT7981
Wireless router chip from its parent Mediatek.

In total there are 58 new machines, including four riscv boards and
eight for 32-bit arm.

The most exciting new addition is probably a pair of laptops based on
the Qualcomm x1e80100 (Snapdragon X1 Elite) chip, the Asus Vivobook
S15 and the Lenovo Yoga Slim7x.

Other noteworthy new additions are:

- A total of 20 Qualcomm based machines, mostly Android devices from
Samsung, Motorola and LG, as well as a wireless router and some
reference designs

- Six NXP i.MX based machines, mostly industrial boards along with
some reference designs

- Mediatek sees some interesting Filogic based routers including the
"OpenWRT One", a few new Chromebooks as well as single-board
computers.

- Four machines from Solidrun based on Marvell cn913x, replacing the
older Armada 8000 based counterparts

- The four Amlogic machines are all set top boxes or reference
designs for them

- The nine new Rockchips machines are mostly single-board computers
including some interesting ones based on the rk3588 chip like the
ROCK 5 ITX board and the CM3588 with its four NVMe slots

- The RISC-V boards are all single-board computers based on Starfive
JH7110, Microchip MPFS and Allwinner D1, which all had similar
boards already

There are also a lot of updates to already supported machines, notably
for the TI K3, Rockchips, Freescale and of course Qualcomm platforms"

* tag 'soc-dt-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (846 commits)
arm64: dts: allwinner: h616: add crypto engine node
riscv: dts: add clock generator for Sophgo SG2042 SoC
arm64: dts: rockchip: Add Xunlong Orange Pi 3B
dt-bindings: arm: rockchip: Add Xunlong Orange Pi 3B
arm64: dts: rockchip: Add Radxa ROCK 3B
dt-bindings: arm: rockchip: Add Radxa ROCK 3B
mailmap: Update Luca Weiss's email address
ARM: dts: ixp4xx: nslu2: beeper uses PWM
arm64: dts: rockchip: add ROCK 5 ITX board
dt-bindings: arm: rockchip: Add ROCK 5 ITX board
arm64: dts: rockchip: Add dma-names to uart1 on Pine64 rk3566 devices
arm64: dts: rockchip: Add avdd supplies to hdmi on rock64
arm64: dts: qcom: msm8916-lg-c50: add initial dts for LG Leon LTE
arm64: dts: qcom: msm8916-lg-m216: Add initial device tree
dt-bindings: arm: qcom: Add msm8916 based LG devices
ARM: dts: qcom: msm8960: correct memory base
arm64: dts: qcom: ipq9574: Add icc provider ability to gcc
dt-bindings: interconnect: Add Qualcomm IPQ9574 support
arm64: dts: qcom: sm8150: Add video clock controller node
arm64: dts: qcom: pm6150: Add vibrator
...

show more ...

Merge tag 'qcom-arm64-for-6.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt

A few more Arm64 DeviceTree updates for v6.11

This introduces support for Lenovo Thinkpad

Merge tag 'qcom-arm64-for-6.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt

A few more Arm64 DeviceTree updates for v6.11

This introduces support for Lenovo Thinkpad Yoga slim 7x, LG Leon LTE,
and LG K10 (K420n).

In addition to this, all Gen-1 platforms gets the DWC3 quirk to disable
"SuperSpeed in park mode", which resolves an instabliity issue seen in
host mode.

For Fairphone 4, PM6150L and PMK8003 thermal sensors are added and
thermal zones defined.

Two fastrpc contexts on SM6350 are marked as non-secure, to allow
non-secure usage.

The video clock controller on SM8150 is introduced. IPQ9574 GCC is
marked as a interconnect provider. The vibrator block in the PM6150 is
described.

On SC7280 the download mode register is defined for SCM, allowing it to
enable/disable the ramdump support during a system crash.

Lastly, add a mailmap entry for Luca Weiss.

* tag 'qcom-arm64-for-6.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (22 commits)
mailmap: Update Luca Weiss's email address
arm64: dts: qcom: msm8916-lg-c50: add initial dts for LG Leon LTE
arm64: dts: qcom: msm8916-lg-m216: Add initial device tree
dt-bindings: arm: qcom: Add msm8916 based LG devices
arm64: dts: qcom: ipq9574: Add icc provider ability to gcc
dt-bindings: interconnect: Add Qualcomm IPQ9574 support
arm64: dts: qcom: sm8150: Add video clock controller node
arm64: dts: qcom: pm6150: Add vibrator
arm64: dts: qcom: sc7280: Enable download mode register write
arm64: dts: qcom: sm7225-fairphone-fp4: Add PM6150L thermals
arm64: dts: qcom: sm7225-fairphone-fp4: Add PMK8003 thermals
arm64: dts: qcom: sm6350: Add missing qcom,non-secure-domain property
arm64: dts: qcom: sdm845: Disable SS instance in Parkmode for USB
arm64: dts: qcom: msm8996: Disable SS instance in Parkmode for USB
arm64: dts: qcom: sm6350: Disable SS instance in Parkmode for USB
arm64: dts: qcom: sm6115: Disable SS instance in Parkmode for USB
arm64: dts: qcom: sdm630: Disable SS instance in Parkmode for USB
arm64: dts: qcom: msm8998: Disable SS instance in Parkmode for USB
arm64: dts: qcom: ipq8074: Disable SS instance in Parkmode for USB
arm64: dts: qcom: ipq6018: Disable SS instance in Parkmode for USB
...

Link: https://lore.kernel.org/r/20240709193406.3966-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

Merge tag 'qcom-arm64-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt

Qualcomm Arm64 DeviceTree updates for v6.11

This introduces 11 new boards, namely:
* ASUS V

Merge tag 'qcom-arm64-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt

Qualcomm Arm64 DeviceTree updates for v6.11

This introduces 11 new boards, namely:
* ASUS Vivobook S 15
* Lenovo Smart Tab M10 DTS
* Motorola Moto E 2015 LTE (surnia)
* Motorola Moto G 2015 (osprey)
* Motorola Moto G4 Play (harpia)
* Qualcomm AIM300 AIoT development board
* Qualcomm SM8650 Hardware Development Kit (HDK)
* SHIFTphone 8
* Samsung Galaxy Z Fold5
* Schneider HMIBSC board DTS
* TP-Link Archer AX55 v1

Of particular interest here is the Asus Vivobook, the first supported X1
Elite consumer laptop.

For IPQ6018 an SDHCI controller is added and on IPQ9574 an MDIO bus is
described.

The improvements to MSM8916-based devices continues, with sound and
mdoem support added to Acer Iconia Talk S and GPLUS FL8005A, the latter
also gaining BMS support. Samsung Galaxy devices gains PMIC and charger
definitions, NFC support and MUIC. Accelerometer and magnetometer
support is added to the Samsung Galaxy Grand Prime devices.

On MSM8976 definitions for IOMMU, the display subsystem, wifi subsystem,
and Adreno GPU are added.

On MSM8996 UFS core clock frequencies are specified, FastRPC nodes are
added for the audio DSP, glink-edges are described where available, the
display subsystem reset is added.

Venus is introduced on MSM8998 and the "No MSA Ready" quirk is added to
allow ath10k to come up.

GPU support is added to QCM2290 and enabled on the RB1 development
board.
The I2C controller used for communicating with the LT9611UXC HDMI
bridge is temporarily replaced with i2c-gpio while issues with the
builtin controller is diagnosed. The same is done for RB2, on the
QRB4210 platform.
On RB2 TCPM max current draw is corrected and the vreg_l9a regulator is
marked as always on to match expectations.

On the QDU1000 platform, USB is added, secure QFPROM is introduced to
allow LLCC to access OTP data. USB is enabled on the two IDP boards.

SA8775p gains PCIe endpoint definitions, LLCCC support, IMEM and PIL
info regions. Nodes are marked as dma-coherent as needed, a dedicated
carveout for shared memory bridge allocations is introduced.
The SA8775P ride device is split in the two versions r2 and r3.

The SC7180 Trogdor clamshell/detachable fragments are refactored for
convenience, and pwmleds are disabled where unused.

On SC7280 the APR nodes for interfacing with the audio services in audio
DSP firmware are introduced. The Qualcomm SMMU TBUs are described, to
enable improved debug support. QoS clocks are added to interconnects, as
needed in order to operate the QoS settings on some buses.
SuperSpeed in park is disabled for the primary DWC3 instance to address
host controller issues under load.

The PM8008 (camera PMIC) is introduced in Fairphone 5, regulators are
named for better output, and firmware name for IPA is adjusted to the
preferred file format.
The HDMI bridge on Rb3gen2 is described, rtc, gpi-dma and qup nodes are
enabled.

The Type-C port manager found in PM7250b is enabled, for targets not
using pmic-glink firmware for Type-C management.

SC8180X gets a number of smaller corrections, and some cleanups -
related to both functional issues and DeviceTree validation.

The PSHOLD node is marked reserved, after reports that this causes
issues during shutdown. Description of the USB signals are updated to
match the signal path. The PM8008 camera PMIC is added to Lenovo
ThinkPad X13s.

The PM660 PMIC is extended with charger and rradc definitions, and the
SDM670 gains a SMEM region definition.

On SDM845 the Qualcomm SMMU TBU nodes are described, to enable improved
debug output during faults etc. The UFS PHY is associated with its GDSC,
and the DisplayPort controller is wired up to the QMP PHY.

The Lenovo Yoga C630 Embedded Controller is introduced, adding battery
and Type-C port management and altmode support. The C630 also gains WiFI
calibration variant information, to cause selection of the right data.
The missing IPA firmware path is corrected.

For the SDX75 platform, AOSS, IPCC, SDHCI, TCSR, modem SMP2P, I2C and
SPI nodes are introduced. SD-card support is added to the IDP board.

CPUfreq support is introduced for the SM4450 platform.

Missing reset is added to the SDHC controller of SM6115. The UFS PHY
is associated with its GDSC, so is the PHY on SM6350.

On Fairphone 4, the camera pmic (PM8008) is introduced, regulators are
named for more informative debug output, and USB role switching is
enabled.

On the Fairphone 3, vibrator support is added and enabled.

On SM8250, the USB signal paths are properly described in the OF graph,
the UFS PHY gains its required power-domains description.
Thanks to the introduction of PCI power sequence support, the QRB5165
RB5 WiFi chip can now be powered up, so this is added.

Touchscreen interrupt flags are corrected accross a number of Sony
Xperia devices, to remove the unexpected traces from downstream.

On SM8450 an OPP-table is introduced for the PCIe controllers, to
specify the bandwidth and performance state requirements for the
different genrations and link widths. For this the PCIe controllers also
gains interconnect path definitions. The LLCC register layout is
corrected, and the UFS PHY is associated with its GDSC.

On the SM8550 development boards speaker port mapping is added. WiFi
support is finally enabled on the QRD board.
The new AIM300 development platform/board is introduced.

For SM8650 video and camera clock controller are introduced. SCM node
gains details necessary to trigger USB ramdump (download mode) upon a
system crash.
WiFi support and speaker port mapping is added to the QRD and the newly
introduced HDK. On the MTP the USB Type-C connector is describe to be
routed to the PHY.
In addition to the base HDK, a Display Card overlay is also introduced.

For X1 Elite bwmon, fastrpc and GPU support, tsens, and the missing PCIe
6a instance are added. Thermal zones are described. Pmic-glink is
introduced for both CRD and QCP devices, and remaining PMICs are
described. Audio support is also added to the QCP.
An explicit, larger, chunk of CMA memory is added to the various
devices, in order to compensate for the lack of IOMMU for PCIe.

Across a wide range of platforms, the thermal zone polling delays are
removed as supplies are interrupt driven anyways. Also thermal related
is the introduction of GPU thermal throttling, across many SoCs.

The old SMSM implementation is finally transitioned to using the
mailbox-based description and implementation for invoking interrupts on
remote processors. As such interrupt-triggering is converted to use this
mechanism on related platforms.

The usb-role-switch property is removed for all USB instances hard coded
to either host or peripheral across a range of boards.

* tag 'qcom-arm64-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (279 commits)
dt-bindings: arm: qcom: Document samsung,ms013g
arm64: dts: qcom: Add device tree for ASUS Vivobook S 15
dt-bindings: arm: qcom: Add ASUS Vivobook S 15
arm64: dts: qcom: qrb4210-rb2: Correct max current draw for VBUS
arm64: dts: qcom: msm8998: add venus node
arm64: dts: qcom: sa8775p-ride-r3: add new board file
arm64: dts: qcom: move common parts for sa8775p-ride variants into a .dtsi
dt-bindings: arm: qcom: add sa8775p-ride Rev 3
arm64: dts: qcom: sm8550-qrd: add port mapping to speakers
arm64: dts: qcom: sm8550-mtp: add port mapping to speakers
arm64: dts: qcom: sm8550-hdk: add port mapping to speakers
arm64: dts: qcom: sm8650-qrd: add port mapping to speakers
arm64: dts: qcom: sm8650-mtp: add port mapping to speakers
arm64: dts: qcom: sm8650-hdk: add port mapping to speakers
arm64: dts: qcom: sm7225-fairphone-fp4: Name the regulators
arm64: dts: qcom: pm8916: correct thermal zone name
arm64: dts: qcom: x1e80100: Add gpu support
arm64: dts: qcom: x1e80100: Fix USB HS PHY 0.8V supply
arm64: dts: qcom: qcs6490-rb3gen2: enable hdmi bridge
arm64: dts: qcom: sm6115: add resets for sdhc_1
...

Link: https://lore.kernel.org/r/20240706173140.18887-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

arm64: dts: qcom: sdm845: Disable SS instance in Parkmode for USB

For Gen-1 targets like SDM845, it is seen that stressing out the
controller in host mode results in HC died error:

xhci-hcd.12.aut

arm64: dts: qcom: sdm845: Disable SS instance in Parkmode for USB

For Gen-1 targets like SDM845, it is seen that stressing out the
controller in host mode results in HC died error:

xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up

And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for SDM845 to mitigate this issue.

Cc: stable@vger.kernel.org
Fixes: ca4db2b538a1 ("arm64: dts: qcom: sdm845: Add USB-related nodes")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240704152848.3380602-9-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

show more ...

Merge branch 'tip/x86/cpu'

The Lunarlake patches rely on the new VFM stuff.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

arm64: dts: qcom: sdm845: describe connections of USB/DP port

Describe links between the first USB3 host and the DisplayPort that is
routed to the same pins.

Reviewed-by: Bryan O'Donoghue <bryan.od

arm64: dts: qcom: sdm845: describe connections of USB/DP port

Describe links between the first USB3 host and the DisplayPort that is
routed to the same pins.

Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240614-yoga-ec-driver-v7-5-9f0b9b40ae76@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

show more ...