Merge drm/drm-next into drm-misc-next

Backmerging to get a late RC of v6.10 before moving into v6.11.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'net-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"The zero-copy changes are relatively significant, but regres

Merge tag 'net-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"The zero-copy changes are relatively significant, but regression risk
should be contained. The feature needs to be used to cause trouble.

Also it feels like we got an order of magnitude more semi-automated
"refactoring" chaff than usual, I wonder if it's just us.

Core & protocols:

- Support Device Memory TCP, ability to zero-copy receive TCP
payloads to a DMABUF region of memory while packet headers land
separately in normal kernel buffers, and TCP processes then as
usual.

- The ability to read the PTP PHC (Physical Hardware Clock) alongside
MONOTONIC_RAW timestamps with PTP_SYS_OFFSET_EXTENDED. Previously
only CLOCK_REALTIME was supported.

- Allow matching on all bits of IP DSCP for routing decisions.
Previously we only supported on matching TOS bits in IPv4 which is
a narrower interpretation of the same header field.

- Increase the range of weights used for multi-path routing from
8 bits to 16 bits.

- Add support for IPv6 PIO p flag in the Prefix Information Option
per draft-ietf-6man-pio-pflag.

- IPv6 IOAM6 support for new tunsrc encap mode for better
performance.

- Detect destinations which blackhole MPTCP traffic and avoid
initiating MPTCP connections to them for a certain period of time,
1h by default.

- Improve IPsec control path performance by removing the inexact
policies list.

- AF_VSOCK: add support for SIOCOUTQ ioctl.

- Add enum for reasons TCP reset was sent for easier tracing.

- Add SMC ringbufs usage statistics.

Drivers:

- Handle netconsole setup failures more gracefully, don't fail
loading, retain the specified target as disabled.

- Extend bonding's IPsec offload pass thru capabilities (ESN, stats).

Filtering:

- Add TCP_BPF_SOCK_OPS_CB_FLAGS to bpf_*sockopt() to address the case
when long-lived sockets miss a chance to set additional callbacks
if a sockops program was not attached early in their lifetime.

- Support using BPF skb helpers in tracepoints.

- Conntrack Netlink: support CTA_FILTER for flush.

- Improve SCTP support in nfnetlink_queue.

- Improve performance of large nftables flush transactions.

Things we sprinkled into general kernel code:

- selftests: support setting an "interpreter" for script files; make
it easy to run as separate cases tests where one "interpreter" is
fed various test descriptions (in our case packet sequences).

Driver API:

- Extend core and ethtool APIs to support many PHYs connected to a
single interface (PHY topologies).

- Extend cable diagnostics to specify whether Time Domain
Reflectometry (TDR) or Active Link Cable Diagnostic (ALCD) was
used.

- Add library for implementing MAC-PHY Ethernet drivers for SPI
devices compatible with Open Alliance 10BASE-T1x MAC-PHY Serial
Interface (TC6) standard.

- Add helpers to the PHY framework, for PHYs following the Open
Alliance standards:
- 1000BaseT1 link settings
- cable test and diagnostics

- Support listing / dumping all allocated RSS contexts.

- Add configuration for frequency Embedded SYNC in DPLL, which
magically embeds sync pulses into Ethernet signaling.

Device drivers:

- Ethernet high-speed NICs:
- Broadcom (bnxt):
- use better FW APIs for queue reset
- support QOS and TPID settings for the SR-IOV VLAN
- support dynamic MSI-X allocation
- Intel (100G, ice, idpf):
- ice: support PCIe subfunctions
- iavf: add support for TC U32 filters on VFs
- ice: support Embedded SYNC in DPLL
- nVidia/Mellanox (mlx5):
- support HW managed steering tables
- support PCIe PTM cross timestamping
- AMD/Pensando:
- ionic: use page_pool to increase Rx performance
- Cisco (enic):
- report per-queue statistics

- Ethernet virtual:
- Microsoft vNIC:
- mana: support configuring ring length
- netvsc: enable more channels on systems with many CPUs
- IBM veth:
- optimize polling to improve TCP_RR performance
- optimize performance of Tx handling
- VirtIO net:
- synchronize the operstate with the admin state to allow a
lower virtio-net to propagate the link status to an upper
device like macvlan

- Ethernet NICs consumer, and embedded:
- Add driver for Realtek automotive PCIe devices (RTL9054,
RTL9068, RTL9072, RTL9075, RTL9068, RTL9071)
- Add driver for Microchip LAN8650/1 10BASE-T1S MAC-PHY.
- Microchip:
- lan743x: use phylink - support WOL, EEE, pause, link settings
- add Wake-on-LAN support for KSZ87xx family
- add KSZ8895/KSZ8864 switch support
- factor out FDMA code and use it in sparx5 and lan966x
(including DCB support in both)
- Synopsys (stmmac):
- support frame preemption (configured using TC and ethtool)
- support Loongson DWMAC (GMAC v3.73)
- support RockChips RK3576 DWMAC
- TI:
- am65-cpsw: add multi queue RX support
- icssg-prueth: HSR offload support
- Cadence (macb):
- enable software (hrtimer based) IRQ coalescing by default
- Xilinx (axinet):
- expose HW statistics
- improve multicast filtering
- relax Rx checksum offload constraints
- MediaTek:
- mt7530: add EN7581 support
- Aspeed (ftgmac100):
- report link speed and duplex
- Intel:
- igc: add mqprio offload
- igc: report EEE configuration
- RealTek (r8169):
- add support for RTL8126A rev.b
- Vitesse (vsc73xx):
- implement FDB add/del/dump operations
- Freescale (fs_enet):
- use phylink

- Ethernet PHYs:
- vitesse: implement downshift and MDI-X in vsc73xx PHYs
- microchip: support LAN887x, supporting IEEE 802.3bw (100BASE-T1)
and IEEE 802.3bp (1000BASE-T1) specifications
- add Applied Micro QT2025 PHY driver (in Rust)
- add Motorcomm yt8821 2.5G Ethernet PHY driver

- CAN:
- add driver for Rockchip RK3568 CAN-FD controller
- flexcan: add wakeup support for imx95
- kvaser_usb: set hardware timestamp on transmitted packets

- WiFi:
- mac80211/cfg80211:
- EHT rate support in AQL airtime fairness
- handle DFS (radar detection) per link in Multi-Link Operation
- RealTek (rtw89):
- support RTL8852BT and 8852BE-VT (WiFi 6)
- support hardware rfkill
- support HW encryption in unicast management frames
- support Wake-on-WLAN with supported network detection
- RealTek (rtw89):
- improve Rx performance by using USB frame aggregation
- support USB 3 with RTL8822CU/RTL8822BU
- Intel (iwlwifi/mvm):
- offload RLC/SMPS functionality to firmware
- Marvell (mwifiex):
- add host based MLME to enable WPA3

- Bluetooth:
- add support for Amlogic HCI UART protocol
- add support for ISO data/packets to Intel and NXP drivers"

* tag 'net-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1303 commits)
net/mlx5: HWS, check the correct variable in hws_send_ring_alloc_sq()
netfilter: nft_socket: Fix a NULL vs IS_ERR() bug in nft_socket_cgroup_subtree_level()
ice: Fix a NULL vs IS_ERR() check in probe()
ice: Fix a couple NULL vs IS_ERR() bugs
net: ethernet: fs_enet: Make the per clock optional
net: ti: icssg-prueth: Add multicast filtering support in HSR mode
net: ti: icssg-prueth: Enable HSR Tx duplication, Tx Tag and Rx Tag offload
net: ti: icssg-prueth: Add support for HSR frame forward offload
net: ti: icssg-prueth: Stop hardcoding def_inc
net: ti: icss-iep: Move icss_iep structure
net: ibm: emac: get rid of wol_irq
net: ibm: emac: remove all waiting code
net: ibm: emac: replace of_get_property
net: ibm: emac: use netdev's phydev directly
net: ibm: emac: use devm for register_netdev
net: ibm: emac: remove mii_bus with devm
net: ibm: emac: use devm for of_iomap
net: ibm: emac: manage emac_irq with devm
net: ibm: emac: use devm for alloc_etherdev
octeontx2-af: debugfs: Add Channel info to RPM map
...

show more ...

Merge branch 'device-memory-tcp'

Mina Almasry says:

====================
Device Memory TCP

Device memory TCP (devmem TCP) is a proposal for transferring data
to and/or from device memory efficient

Merge branch 'device-memory-tcp'

Mina Almasry says:

====================
Device Memory TCP

Device memory TCP (devmem TCP) is a proposal for transferring data
to and/or from device memory efficiently, without bouncing the data
to a host memory buffer.

* Problem:

A large amount of data transfers have device memory as the source
and/or destination. Accelerators drastically increased the volume
of such transfers. Some examples include:

- ML accelerators transferring large amounts of training data from storage
into GPU/TPU memory. In some cases ML training setup time can be as long
as 50% of TPU compute time, improving data transfer throughput &
efficiency can help improving GPU/TPU utilization.

- Distributed training, where ML accelerators, such as GPUs on different
hosts, exchange data among them.

- Distributed raw block storage applications transfer large amounts of
data with remote SSDs, much of this data does not require host
processing.

Today, the majority of the Device-to-Device data transfers the network
are implemented as the following low level operations: Device-to-Host
copy, Host-to-Host network transfer, and Host-to-Device copy.

The implementation is suboptimal, especially for bulk data transfers,
and can put significant strains on system resources, such as host memory
bandwidth, PCIe bandwidth, etc. One important reason behind the current
state is the kernel’s lack of semantics to express device to network
transfers.

* Proposal:

In this patch series we attempt to optimize this use case by implementing
socket APIs that enable the user to:

1. send device memory across the network directly, and
2. receive incoming network packets directly into device memory.

Packet _payloads_ go directly from the NIC to device memory for receive
and from device memory to NIC for transmit.
Packet _headers_ go to/from host memory and are processed by the TCP/IP
stack normally. The NIC _must_ support header split to achieve this.

Advantages:

- Alleviate host memory bandwidth pressure, compared to existing
network-transfer + device-copy semantics.

- Alleviate PCIe BW pressure, by limiting data transfer to the lowest level
of the PCIe tree, compared to traditional path which sends data through
the root complex.

* Patch overview:

** Part 1: netlink API

Gives user ability to bind dma-buf to an RX queue.

** Part 2: scatterlist support

Currently the standard for device memory sharing is DMABUF, which doesn't
generate struct pages. On the other hand, networking stack (skbs, drivers,
and page pool) operate on pages. We have 2 options:

1. Generate struct pages for dmabuf device memory, or,
2. Modify the networking stack to process scatterlist.

Approach #1 was attempted in RFC v1. RFC v2 implements approach #2.

** part 3: page pool support

We piggy back on page pool memory providers proposal:
https://github.com/kuba-moo/linux/tree/pp-providers

It allows the page pool to define a memory provider that provides the
page allocation and freeing. It helps abstract most of the device memory
TCP changes from the driver.

** part 4: support for unreadable skb frags

Page pool iovs are not accessible by the host; we implement changes
throughput the networking stack to correctly handle skbs with unreadable
frags.

** Part 5: recvmsg() APIs

We define user APIs for the user to send and receive device memory.

Not included with this series is the GVE devmem TCP support, just to
simplify the review. Code available here if desired:
https://github.com/mina/linux/tree/tcpdevmem

This series is built on top of net-next with Jakub's pp-providers changes
cherry-picked.

* NIC dependencies:

1. (strict) Devmem TCP require the NIC to support header split, i.e. the
capability to split incoming packets into a header + payload and to put
each into a separate buffer. Devmem TCP works by using device memory
for the packet payload, and host memory for the packet headers.

2. (optional) Devmem TCP works better with flow steering support & RSS
support, i.e. the NIC's ability to steer flows into certain rx queues.
This allows the sysadmin to enable devmem TCP on a subset of the rx
queues, and steer devmem TCP traffic onto these queues and non devmem
TCP elsewhere.

The NIC I have access to with these properties is the GVE with DQO support
running in Google Cloud, but any NIC that supports these features would
suffice. I may be able to help reviewers bring up devmem TCP on their NICs.

* Testing:

The series includes a udmabuf kselftest that show a simple use case of
devmem TCP and validates the entire data path end to end without
a dependency on a specific dmabuf provider.

** Test Setup

Kernel: net-next with this series and memory provider API cherry-picked
locally.

Hardware: Google Cloud A3 VMs.

NIC: GVE with header split & RSS & flow steering support.
====================

Link: https://patch.msgid.link/20240910171458.219195-1-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

netdev: add dmabuf introspection

Add dmabuf information to page_pool stats:

$ ./cli.py --spec ../netlink/specs/netdev.yaml --dump page-pool-get
...
{'dmabuf': 10,
'id': 456,
'ifindex': 3,
'i

netdev: add dmabuf introspection

Add dmabuf information to page_pool stats:

$ ./cli.py --spec ../netlink/specs/netdev.yaml --dump page-pool-get
...
{'dmabuf': 10,
'id': 456,
'ifindex': 3,
'inflight': 1023,
'inflight-mem': 4190208},
{'dmabuf': 10,
'id': 455,
'ifindex': 3,
'inflight': 1023,
'inflight-mem': 4190208},
{'dmabuf': 10,
'id': 454,
'ifindex': 3,
'inflight': 1023,
'inflight-mem': 4190208},
{'dmabuf': 10,
'id': 453,
'ifindex': 3,
'inflight': 1023,
'inflight-mem': 4190208},
{'dmabuf': 10,
'id': 452,
'ifindex': 3,
'inflight': 1023,
'inflight-mem': 4190208},
{'dmabuf': 10,
'id': 451,
'ifindex': 3,
'inflight': 1023,
'inflight-mem': 4190208},
{'dmabuf': 10,
'id': 450,
'ifindex': 3,
'inflight': 1023,
'inflight-mem': 4190208},
{'dmabuf': 10,
'id': 449,
'ifindex': 3,
'inflight': 1023,
'inflight-mem': 4190208},

And queue stats:

$ ./cli.py --spec ../netlink/specs/netdev.yaml --dump queue-get
...
{'dmabuf': 10, 'id': 8, 'ifindex': 3, 'type': 'rx'},
{'dmabuf': 10, 'id': 9, 'ifindex': 3, 'type': 'rx'},
{'dmabuf': 10, 'id': 10, 'ifindex': 3, 'type': 'rx'},
{'dmabuf': 10, 'id': 11, 'ifindex': 3, 'type': 'rx'},
{'dmabuf': 10, 'id': 12, 'ifindex': 3, 'type': 'rx'},
{'dmabuf': 10, 'id': 13, 'ifindex': 3, 'type': 'rx'},
{'dmabuf': 10, 'id': 14, 'ifindex': 3, 'type': 'rx'},
{'dmabuf': 10, 'id': 15, 'ifindex': 3, 'type': 'rx'},

Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240910171458.219195-14-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

netdev: support binding dma-buf to netdevice

Add a netdev_dmabuf_binding struct which represents the
dma-buf-to-netdevice binding. The netlink API will bind the dma-buf to
rx queues on the netdevice

netdev: support binding dma-buf to netdevice

Add a netdev_dmabuf_binding struct which represents the
dma-buf-to-netdevice binding. The netlink API will bind the dma-buf to
rx queues on the netdevice. On the binding, the dma_buf_attach
& dma_buf_map_attachment will occur. The entries in the sg_table from
mapping will be inserted into a genpool to make it ready
for allocation.

The chunks in the genpool are owned by a dmabuf_chunk_owner struct which
holds the dma-buf offset of the base of the chunk and the dma_addr of
the chunk. Both are needed to use allocations that come from this chunk.

We create a new type that represents an allocation from the genpool:
net_iov. We setup the net_iov allocation size in the
genpool to PAGE_SIZE for simplicity: to match the PAGE_SIZE normally
allocated by the page pool and given to the drivers.

The user can unbind the dmabuf from the netdevice by closing the netlink
socket that established the binding. We do this so that the binding is
automatically unbound even if the userspace process crashes.

The binding and unbinding leaves an indicator in struct netdev_rx_queue
that the given queue is bound, and the binding is actuated by resetting
the rx queue using the queue API.

The netdev_dmabuf_binding struct is refcounted, and releases its
resources only when all the refs are released.

Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Kaiyuan Zhang <kaiyuanz@google.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # excluding netlink
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240910171458.219195-4-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: netdev netlink api to bind dma-buf to a net device

API takes the dma-buf fd as input, and binds it to the netdevice. The
user can specify the rx queues to bind the dma-buf to.

Suggested-by: St

net: netdev netlink api to bind dma-buf to a net device

API takes the dma-buf fd as input, and binds it to the netdevice. The
user can specify the rx queues to bind the dma-buf to.

Suggested-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240910171458.219195-3-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.11 merge window.

Merge branch 'for-linus' into for-next

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge branch 'mana-shared' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Leon Romanovsky says:

====================
net: mana: Allow variable size indirection table

Like we talked, I

Merge branch 'mana-shared' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Leon Romanovsky says:

====================
net: mana: Allow variable size indirection table

Like we talked, I created new shared branch for this patch:
https://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git/log/?h=mana-shared

* 'mana-shared' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
net: mana: Allow variable size indirection table
====================

Link: https://lore.kernel.org/all/20240612183051.GE4966@unreal
Signed-off-by: Leon Romanovsky <leon@kernel.org>

show more ...

ASoC: Merge up fixes

We need this to get the i.MX platforms working in CI again.

Merge tag 'v6.9' into next

Sync up with the mainline to bring in the new cleanup API.

Merge drm-misc-next-2024-07-04 into drm-misc-next-fixes

Let's start the drm-misc-next-fixes cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge remote-tracking branch 'perf-tools' into perf-tools-next

Merge fixes and updates in v6.10 into perf-tools-next to resolve changes
in synthesizing the LOST_SAMPLES records and build fixes.

Sig

Merge remote-tracking branch 'perf-tools' into perf-tools-next

Merge fixes and updates in v6.10 into perf-tools-next to resolve changes
in synthesizing the LOST_SAMPLES records and build fixes.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>

show more ...

Merge drm/drm-next into drm-intel-next

Sync to v6.10-rc3.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-xe-next

Needed to get tracing cleanup and add mmio tracing series.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge remote-tracking branch 'drm-misc/drm-misc-next' into HEAD

Merge drm-misc-next tree into the msm-next tree in order to be able to
use HDMI connector framework for the MSM HDMI driver.

Merge tag 'v6.10-rc3'

Linux 6.10-rc3

This is needed for the ipu6 and mei fixes.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

Merge drm/drm-next into drm-misc-next

Let's start the new release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-gt-next

Some display refactoring patches are needed in order to allow conflict-
less merging.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

Merge branch 'for-6.11/trivial' into for-linus

Couple of trivial fixes:
- extra semicolon (Chen Ni)
- typo (Thorsten Blum)

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

Conflicts:

drivers/net/ethernet/ti/icssg/icssg_classifier.c
abd5576b9c57 ("net: t

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

Conflicts:

drivers/net/ethernet/ti/icssg/icssg_classifier.c
abd5576b9c57 ("net: ti: icssg-prueth: Add support for ICSSG switch firmware")
56a5cf538c3f ("net: ti: icssg-prueth: Fix start counter for ft1 filter")
https://lore.kernel.org/all/20240531123822.3bb7eadf@canb.auug.org.au/

No other adjacent changes.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge branch 'sched/urgent' into sched/core, to pick up fixes and refresh the branch

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'tip/x86/cpu'

The Lunarlake patches rely on the new VFM stuff.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge tag 'regulator-hw-enable-helper' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into reset/next

regulator: Add helper to allow enable/disable in interrupt context

Add a

Merge tag 'regulator-hw-enable-helper' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into reset/next

regulator: Add helper to allow enable/disable in interrupt context

Add a helper function that enables exclusive consumers to bypass locking
and do an enable/disable from within interrupt context.

Link: https://lore.kernel.org/r/988df019-00d4-4209-8716-39e82c565bf1@sirena.org.uk
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

show more ...

Merge branch 'dt' of https://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm into v6.11/arm64-dt

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>