Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge branch 'ib/6.11-rc6-matrix-keypad-spitz' into next

Bring in changes removing support for platform data from matrix-keypad
driver.

Merge tag 'v6.11-rc1' into clk-meson-next

Linux 6.11-rc1

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be a

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be able to be mapped at the address specified by the "reserve_mem" command
line parameter.

Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

show more ...

Merge tag 'v6.11-rc1' into for-6.12

Linux 6.11-rc1

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter and allows further pending refactors.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Get drm-misc-next to the state of v6.11-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Sync with v6.11-rc1 in general, and specifically get the new
BACKLIGHT_POWER_ constants for power states.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'linus' into x86/mm

Bring x86 and selftests up to date

Merge drm/drm-fixes into drm-misc-fixes

Let's start the new drm-misc-fixes cycle by bringing in 6.11-rc1.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'next' into for-linus

Prepare input updates for 6.11 merge window.

Merge tag 'v6.9' into next

Sync up with the mainline to bring in the new cleanup API.

Merge drm/drm-next into drm-intel-gt-next

Some display refactoring patches are needed in order to allow conflict-
less merging.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

Merge tag 'thermal-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull thermal control updates from Rafael Wysocki:
"These add some new hardware support (notably, the Lu

Merge tag 'thermal-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull thermal control updates from Rafael Wysocki:
"These add some new hardware support (notably, the Lunar Lake platform
support in int340x and X1E80100 temperature sensor), continue to
rework the thermal driver interface to eliminate trip point IDs from
it, update DT bindings for a number of platforms and simplify probe in
a number of thermal drivers, address issues and clean up code.

Specifics:

- Add DLVR and MSI interrupt support for the Lunar Lake platform to
the int340x thermal driver (Srinivas Pandruvada)

- Enable workload type hints (WLT) support and power floor interrupt
support for the Lunar Lake platform in int340x ((Srinivas
Pandruvada)

- Switch Intel thermal drivers to new Intel CPU model defines (Tony
Luck)

- Clean up the int3400 and int3403 drivers (Erick Archer and David
Alan Gilbert)

- Improve intel_pch_thermal kernel log messages printed during
suspend to idle (Zhang Rui)

- Make the intel_tcc_cooling driver use a model-specific bitmask for
TCC offset (Ricardo Neri)

- Redesign the .set_trip_temp() thermal zone callback to take a trip
pointer instead of a trip ID and update its users (Rafael Wysocki)

- Avoid using invalid combinations of polling_delay and passive_delay
thermal zone parameters (Rafael Wysocki)

- Update a cooling device registration function to take a const
argument (Krzysztof Kozlowski)

- Make the uniphier thermal driver use thermal_zone_for_each_trip()
for walking trip points (Rafael Wysocki)

- Fix and clean up several minor shortcomings in thermal debug
(Rafael Wysocki)

- Rename __thermal_zone_set_trips() to thermal_zone_set_trips() and
make it use trip thresholds (Rafael Wysocki)

- Use READ_ONCE() for lockless access to trip temperature and
hysteresis (Rafael Wysocki)

- Drop unnecessary cooling device target state checks from the
Bang-Bang thermal governor (Rafael Wysocki)

- Avoid invoking thermal governor .trip_crossed() callback for
critical and hot trip points (Rafael Wysocki)

- Group all Renesas drivers inside a dedicated sub directory and add
the missing dependency to OF (Niklas Söderlund)

- Add suspend/resume support on k3_j72xx_bandgap and take the
opportunity to remove an unneeded delay in the init time code path
(Théo Lebrun)

- Fix thermal zone definition for MT8186 and MT8188 (Julien Panis)

- Convert hisilicon-thermal.txt to dt-schema (Abdulrasaq Lawani)

- Add DT bindings for the X1E80100 temperature sensor (Abel Vesa)

- Fix the thermal zone node name regular expression in the DT schema
(Krzysztof Kozlowski)

- Avoid failing thermal control initialization by using default
values on some platforms where calibration data is missing (Chen-Yu
Tsai)

- Fix the sensor cell size in DT for the Exynos platform (Krzysztof
Kozlowski)

- Bring the common definition of '#thermal-sensor-cells' property in
order to simplify the bindings on all the platforms where this
change makes sense and do some minor cleanups (Krzysztof Kozlowski)

- Fix a race between removal and clock disable in the broadcom
thermal driver (Krzysztof Kozlowski)

- Drop 'trips' DT node as required from the thermal zone bindings in
order to fix the remaining warnings appearing for thermal zones
without trip points (Rob Herring)

- Simplify all the drivers where dev_err_probe() can apply (Krzysztof
Kozlowski)

- Clean up code related to stih416 as this platform is not described
anywhere (Raphael Gallais-Pou)"

* tag 'thermal-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (81 commits)
thermal/drivers/sti: Cleanup code related to stih416
thermal/drivers/generic-adc: Simplify with dev_err_probe()
thermal/drivers/generic-adc: Simplify probe() with local dev variable
thermal/drivers/qcom-tsens: Simplify with dev_err_probe()
thermal/drivers/qcom-spmi-adc-tm5: Simplify with dev_err_probe()
thermal/drivers/imx: Simplify with dev_err_probe()
thermal/drivers/imx: Simplify probe() with local dev variable
thermal/drivers/hisi: Simplify with dev_err_probe()
thermal/drivers/exynos: Simplify with dev_err_probe()
thermal/drivers/exynos: Simplify probe() with local dev variable
thermal/drivers/broadcom: Simplify with dev_err_probe()
thermal/drivers/broadcom: Simplify probe() with local dev variable
thermal/drivers/broadcom: Fix race between removal and clock disable
dt-bindings: thermal: Drop 'trips' node as required
dt-bindings: thermal: qoriq: reference thermal-sensor schema
dt-bindings: thermal: cleanup examples indentation
dt-bindings: thermal: simplify few bindings
dt-bindings: thermal: ti,j72xx: reference thermal-sensor schema
dt-bindings: thermal: ti,am654: reference thermal-sensor schema
dt-bindings: thermal: st,stm32: reference thermal-sensor schema
...

show more ...

Merge tag 'thermal-v6.11-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux into thermal

Merge thermal drivers updates for 6.11-rc1 from Daniel Lezcano:

"- Group all Renesas d

Merge tag 'thermal-v6.11-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux into thermal

Merge thermal drivers updates for 6.11-rc1 from Daniel Lezcano:

"- Group all Renesas drivers inside a dedicated sub directory and add
the missing dependency to OF (Niklas Söderlund)

- Add suspend/resume support on k3_j72xx_bandgap and take the
opportunity to remove a unneeded delay in the init time code path
(Théo Lebrun)

- Fix thermal zone definition for MT8186 and MT8188 (Julien Panis)

- Convert hisilicon-thermal.txt to dt-schema (Abdulrasaq Lawani)

- Add the DT bindings for the X1E80100 temperature sensor (Abel Vesa)

- Fix the thermal zone node name regular expression in the DT schema
(Krzysztof Kozlowski)

- Take into account some production platforms may not have calibration
data. Deal with it with a default value instead of failing the
initialization (Chen-Yu Tsai)

- Fix the sensor cell size on the Exynos platform (Krzysztof Kozlowski)

- Bring the common definition of '#thermal-sensor-cells' property in
order to simplify the bindings on all the platforms where this
change makes sense and do some minor cleanups (Krzysztof Kozlowski)

- Fix a race between removal and clock disable on the broadcom driver
(Krzysztof Kozlowski)

- Drop 'trips' node as required from the thermal zone bindings in
order to fix the remaining warnings appearing with thermal zone
whithout trip points defined (Rob Herring)

- Simplify all the drivers where dev_err_probe() can apply (Krzysztof
Kozlowski)

- Cleanup code related to stih416 as this platform is not described
anywhere (Raphael Gallais-Pou)"

* tag 'thermal-v6.11-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (45 commits)
thermal/drivers/sti: Cleanup code related to stih416
thermal/drivers/generic-adc: Simplify with dev_err_probe()
thermal/drivers/generic-adc: Simplify probe() with local dev variable
thermal/drivers/qcom-tsens: Simplify with dev_err_probe()
thermal/drivers/qcom-spmi-adc-tm5: Simplify with dev_err_probe()
thermal/drivers/imx: Simplify with dev_err_probe()
thermal/drivers/imx: Simplify probe() with local dev variable
thermal/drivers/hisi: Simplify with dev_err_probe()
thermal/drivers/exynos: Simplify with dev_err_probe()
thermal/drivers/exynos: Simplify probe() with local dev variable
thermal/drivers/broadcom: Simplify with dev_err_probe()
thermal/drivers/broadcom: Simplify probe() with local dev variable
thermal/drivers/broadcom: Fix race between removal and clock disable
dt-bindings: thermal: Drop 'trips' node as required
dt-bindings: thermal: qoriq: reference thermal-sensor schema
dt-bindings: thermal: cleanup examples indentation
dt-bindings: thermal: simplify few bindings
dt-bindings: thermal: ti,j72xx: reference thermal-sensor schema
dt-bindings: thermal: ti,am654: reference thermal-sensor schema
dt-bindings: thermal: st,stm32: reference thermal-sensor schema
...

show more ...

dt-bindings: thermal: qcom-spmi-adc-tm-hc: reference thermal-sensor schema

Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and

dt-bindings: thermal: qcom-spmi-adc-tm-hc: reference thermal-sensor schema

Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-9-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

show more ...

Merge drm/drm-next into drm-intel-next

Sync to get the drm_printer changes to drm-intel-next.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge tag 'drm-misc-next-2024-02-08' into msm-next

Merge the drm-misc tree to uprev MSM CI.

Signed-off-by: Rob Clark <robdclark@chromium.org>

Merge drm/drm-next into drm-misc-next

Kickstart 6.9 development cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-xe-next

Sync to v6.8-rc1.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

Merge tag 'v6.8-rc4' into x86/percpu, to resolve conflicts and refresh the branch

Conflicts:
arch/x86/include/asm/percpu.h
arch/x86/include/asm/text-patching.h

Signed-off-by: Ingo Molnar <mingo@k

Merge tag 'v6.8-rc4' into x86/percpu, to resolve conflicts and refresh the branch

Conflicts:
arch/x86/include/asm/percpu.h
arch/x86/include/asm/text-patching.h

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge branch 'linus' into x86/mm, to refresh the branch and pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge v6.8-rc1 into drm-misc-fixes

Let's kickstart the 6.8 fix cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'thermal-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull thermal control updates from Rafael Wysocki:
"These add support for the D1/T113s THS controller to

Merge tag 'thermal-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull thermal control updates from Rafael Wysocki:
"These add support for the D1/T113s THS controller to the sun8i driver
and a DT-based mechanism for platforms to indicate a preference to
reboot (instead of shutting down) on crossing a critical trip point,
fix issues, make other improvements (in the IPA governor, the Intel
HFI driver, the exynos driver and the thermal netlink interface among
other places) and clean up code.

One long-standing issue addressed here is that trip point crossing
notifications sent to user space might be unreliable due to the
incorrect handling of trip point hysteresis in the thermal core:
multiple notifications might be sent for the same event or there might
be events without any notification at all.

Specifics:

- Add dynamic thresholds for trip point crossing detection to prevent
trip point crossing notifications from being sent at incorrect
times or not at all in some cases (Rafael J. Wysocki)

- Fix synchronization issues related to the resume of thermal zones
during a system-wide resume and allow thermal zones to be resumed
concurrently (Rafael J. Wysocki)

- Modify the thermal zone unregistration to wait for the given zone
to go away completely before returning to the caller and rework the
sysfs interface for trip points on top of that (Rafael J. Wysocki)

- Fix a possible NULL pointer dereference in thermal zone
registration error path (Rafael J. Wysocki)

- Clean up the IPA thermal governor and modify it (with the help of a
new governor callback) to avoid allocating and freeing memory every
time its throttling callback is invoked (Lukasz Luba)

- Make the IPA thermal governor handle thermal instance weight
changes via sysfs correctly (Lukasz Luba)

- Update the thermal netlink code to avoid sending messages if there
are no recipients (Stanislaw Gruszka)

- Convert Mediatek Thermal to the json-schema (Rafał Miłecki)

- Fix thermal DT bindings issue on Loongson (Binbin Zhou)

- Fix returning NULL instead of -ENODEV during thermal probe on
Loogsoon (Binbin Zhou)

- Add thermal DT binding for tsens on the SM8650 platform (Neil
Armstrong)

- Add reboot on the critical trip point crossing option feature
(Fabio Estevam)

- Use DEFINE_SIMPLE_DEV_PM_OPS do define PM functions for thermal
suspend/resume on AmLogic (Uwe Kleine-König)

- Add D1/T113s THS controller support to the Sun8i thermal control
driver (Maxim Kiselev)

- Fix example in the thermal DT binding for QCom SPMI (Johan Hovold)

- Fix compilation warning in the tmon utility (Florian Eckert)

- Add support for interrupt-based thermal configuration on Exynos
along with a set of related cleanups (Mateusz Majewski)

- Make the Intel HFI thermal driver enable an HFI instance (eg.
processor package) from its first online CPU and disable it when
the last CPU in it goes offline (Ricardo Neri)

- Fix a kernel-doc warning and a spello in the cpuidle_cooling
thermal driver (Randy Dunlap)

- Move the .get_temp() thermal zone callback presence check to the
thermal zone registration code (Daniel Lezcano)

- Use the for_each_trip() macro for trip points table walks in a few
places in the thermal core (Rafael J. Wysocki)

- Make all trip point updates (via sysfs as well as from the platform
firmware) trigger trip change notifications (Rafael J. Wysocki)

- Drop redundant code from the thermal core and make one function in
it take a const pointer argument (Rafael J. Wysocki)"

* tag 'thermal-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
thermal: trip: Constify thermal zone argument of thermal_zone_trip_id()
thermal: intel: hfi: Disable an HFI instance when all its CPUs go offline
thermal: intel: hfi: Enable an HFI instance from its first online CPU
thermal: intel: hfi: Refactor enabling code into helper functions
thermal/drivers/exynos: Use set_trips ops
thermal/drivers/exynos: Use BIT wherever possible
thermal/drivers/exynos: Split initialization of TMU and the thermal zone
thermal/drivers/exynos: Stop using the threshold mechanism on Exynos 4210
thermal/drivers/exynos: Simplify regulator (de)initialization
thermal/drivers/exynos: Handle devm_regulator_get_optional return value correctly
thermal/drivers/exynos: Wwitch from workqueue-driven interrupt handling to threaded interrupts
thermal/drivers/exynos: Drop id field
thermal/drivers/exynos: Remove an unnecessary field description
tools/thermal/tmon: Fix compilation warning for wrong format
dt-bindings: thermal: qcom-spmi-adc-tm5/hc: Clean up examples
dt-bindings: thermal: qcom-spmi-adc-tm5/hc: Fix example node names
thermal/drivers/sun8i: Add D1/T113s THS controller support
dt-bindings: thermal: sun8i: Add binding for D1/T113s THS controller
thermal: amlogic: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
thermal: amlogic: Make amlogic_thermal_disable() return void
...

show more ...

Merge tag 'thermal-v6.8-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux into thermal

Merge thermal control material for 6.8-rc1 from Daniel Lezcano:

"- Converted Mediatek T

Merge tag 'thermal-v6.8-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux into thermal

Merge thermal control material for 6.8-rc1 from Daniel Lezcano:

"- Converted Mediatek Thermal to the json-schema (Rafał Miłecki)

- Fixed DT bindings issue on Loongson (Binbin Zhou)

- Fixed returning NULL instead of -ENODEV on Loogsoo (Binbin Zhou)

- Added the DT binding for the tsens on SM8650 platform (Neil Armstrong)

- Added a reboot on critical option feature (Fabio Estevam)

- Made usage of DEFINE_SIMPLE_DEV_PM_OPS on AmLogic (Uwe Kleine-König)

- Added the D1/T113s THS controller support on Sun8i (Maxim Kiselev)

- Fixed example in the DT binding for QCom SPMI (Johan Hovold)

- Fixed compilation warning for the tmon utility (Florian Eckert)

- Added interrupt based configuration on Exynos along with a set of
related cleanups (Mateusz Majewski)"

* tag 'thermal-v6.8-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (24 commits)
thermal/drivers/exynos: Use set_trips ops
thermal/drivers/exynos: Use BIT wherever possible
thermal/drivers/exynos: Split initialization of TMU and the thermal zone
thermal/drivers/exynos: Stop using the threshold mechanism on Exynos 4210
thermal/drivers/exynos: Simplify regulator (de)initialization
thermal/drivers/exynos: Handle devm_regulator_get_optional return value correctly
thermal/drivers/exynos: Wwitch from workqueue-driven interrupt handling to threaded interrupts
thermal/drivers/exynos: Drop id field
thermal/drivers/exynos: Remove an unnecessary field description
tools/thermal/tmon: Fix compilation warning for wrong format
dt-bindings: thermal: qcom-spmi-adc-tm5/hc: Clean up examples
dt-bindings: thermal: qcom-spmi-adc-tm5/hc: Fix example node names
thermal/drivers/sun8i: Add D1/T113s THS controller support
dt-bindings: thermal: sun8i: Add binding for D1/T113s THS controller
thermal: amlogic: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
thermal: amlogic: Make amlogic_thermal_disable() return void
thermal/thermal_of: Allow rebooting after critical temp
reboot: Introduce thermal_zone_device_critical_reboot()
thermal/core: Prepare for introduction of thermal reboot
dt-bindings: thermal-zones: Document critical-action
...

show more ...