Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge branch 'ib/6.11-rc6-matrix-keypad-spitz' into next

Bring in changes removing support for platform data from matrix-keypad
driver.

Merge tag 'v6.11-rc1' into clk-meson-next

Linux 6.11-rc1

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be a

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be able to be mapped at the address specified by the "reserve_mem" command
line parameter.

Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

show more ...

Merge tag 'v6.11-rc1' into for-6.12

Linux 6.11-rc1

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter and allows further pending refactors.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Get drm-misc-next to the state of v6.11-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Sync with v6.11-rc1 in general, and specifically get the new
BACKLIGHT_POWER_ constants for power states.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'linus' into x86/mm

Bring x86 and selftests up to date

Merge drm/drm-fixes into drm-misc-fixes

Let's start the new drm-misc-fixes cycle by bringing in 6.11-rc1.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char / misc and other driver updates from Greg KH:
"Here is the "big" set of char/misc and othe

Merge tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char / misc and other driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystem changes
for 6.11-rc1. Nothing major in here, just loads of new drivers and
updates. Included in here are:

- IIO api updates and new drivers added

- wait_interruptable_timeout() api cleanups for some drivers

- MODULE_DESCRIPTION() additions for loads of drivers

- parport out-of-bounds fix

- interconnect driver updates and additions

- mhi driver updates and additions

- w1 driver fixes

- binder speedups and fixes

- eeprom driver updates

- coresight driver updates

- counter driver update

- new misc driver additions

- other minor api updates

All of these, EXCEPT for the final Kconfig build fix for 32bit
systems, have been in linux-next for a while with no reported issues.
The Kconfig fixup went in 29 hours ago, so might have missed the
latest linux-next, but was acked by everyone involved"

* tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (330 commits)
misc: Kconfig: exclude mrvl-cn10k-dpi compilation for 32-bit systems
misc: delete Makefile.rej
binder: fix hang of unregistered readers
misc: Kconfig: add a new dependency for MARVELL_CN10K_DPI
virtio: add missing MODULE_DESCRIPTION() macro
agp: uninorth: add missing MODULE_DESCRIPTION() macro
spmi: add missing MODULE_DESCRIPTION() macros
dev/parport: fix the array out-of-bounds risk
samples: configfs: add missing MODULE_DESCRIPTION() macro
misc: mrvl-cn10k-dpi: add Octeon CN10K DPI administrative driver
misc: keba: Fix missing AUXILIARY_BUS dependency
slimbus: Fix struct and documentation alignment in stream.c
MAINTAINERS: CC dri-devel list on Qualcomm FastRPC patches
misc: fastrpc: use coherent pool for untranslated Compute Banks
misc: fastrpc: support complete DMA pool access to the DSP
misc: fastrpc: add missing MODULE_DESCRIPTION() macro
misc: fastrpc: Add missing dev_err newlines
misc: fastrpc: Use memdup_user()
nvmem: core: Implement force_ro sysfs attribute
nvmem: Use sysfs_emit() for type attribute
...

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.11 merge window.

Merge tag 'iio-for-6.11b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

IIO: 2nd set of new device support, features and cleanup for 6.11

The

Merge tag 'iio-for-6.11b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

IIO: 2nd set of new device support, features and cleanup for 6.11

The big one here is we finally have Paul Cercueil's (and others)
DMA buffer support for IIO devices enabling high speed zero
copy transfer of data to and from sensors supported by IIO (and for
example USB). This should aid with upstream support of a range of
higher performance ADCs and DACs.

Two merges from other trees
- spi/spi_devm_optimize used for simplification in ad7944.
- dmaengine/topic_dma_vec to enable the DMABUF series.

One feature with impact outside IIO.
- Richer set of dev_err_probe() like helpers to cover ERR_PTR() cases.

New device support
==================
adi,ad7173
- Add support for AD4111, AD4112, AD4114, AD4115 and ADC4116 pseudo
differential ADCs. Major driver rework was needed to enabled these.
adi,ad7944
- Use devm_spi_optimize_message() to avoid a local devm cleanup
callback. This is the example case from the patch set, others will
follow.
mediatek,mt6359-auxadc
- New driver for this ADC IP found in MT6357, MT6358 and MT6359 PMICs.
st,accel
- Add support for the LIS2DS12 accelerometer
ti,ads1119
- New driver for this 16 bit 2-differential or 4-single ended channel
ADC.

Features
========
dt-bindings
- Introduce new common-mode-channel property to help handle pseudo
differential ADCs where we have something that looks like one side
of differential input, but which is only suited for use with a
slow moving reference.
adi,adf4350
- Support use as a clock provider.
iio-hmwon
- Support reading of labels from IIO devices by their consumers and
use this in the hwmon bridge.

Cleanup and minor fixes
=======================
Treewide
- Use regmap_clear_bits() / regmap_set_bits() to simplify open coded
equivalents.
- Use devm_regulator_get_enable_read_voltage() to replace equivalent
opencoded boilerplate. In some cases enabled complete conversion to
devm handling and removal of explicit remove() callbacks.
- Introduce dev_err_ptr_probe() and other variants and make use of
of them in a couple of examples driver cleanups. Will find use in
many more drivers soon.
adi,ad7192
- Introduce local struct device *dev and use dev_err_probe() to give
more readable code.
adi,adi-axi-adc/dac
- Improved consistency of messages using dev_err_probe()
adi,adis
- Split the trigger handling into cases that needed paging and those that
don't resulting in more readable code.
- Use cleanup.h to simplify error paths via scoped cleanup.
- Add adis specific lock helpers and make use of them in a number of drivers.
adi,ad7192
- Update maintainer (Alisa-Dariana Roman)
adi,ad7606
- dt-binding cleanup.
avago,apds9306
- Add a maintainer entry (Subhajit Ghosh)
linear,ltc2309
- Fix a wrong endian type.
st,stm32-dfsdm
- Fix a missing port property in the dt-binding.
st,sensors
- Relax whoami match failure to a warning print rather than probe failure.
This enables fallback compatibles to existing parts from those that don't
necessarily even exit yet.

* tag 'iio-for-6.11b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (112 commits)
iio: adc: ad7173: Fix uninitialized symbol is_current_chan
iio: adc: Add support for MediaTek MT6357/8/9 Auxiliary ADC
math.h: Add unsigned 8 bits fractional numbers type
dt-bindings: iio: adc: Add MediaTek MT6359 PMIC AUXADC
iio: common: scmi_iio: convert to dev_err_probe()
iio: backend: make use of dev_err_cast_probe()
iio: temperature: ltc2983: convert to dev_err_probe()
dev_printk: add new dev_err_probe() helpers
iio: xilinx-ams: Add labels
iio: adc: ad7944: use devm_spi_optimize_message()
Documentation: iio: Document high-speed DMABUF based API
iio: buffer-dmaengine: Support new DMABUF based userspace API
iio: buffer-dma: Enable support for DMABUFs
iio: core: Add new DMABUF interface infrastructure
MAINTAINERS: Update AD7192 driver maintainer
iio: adc: ad7192: use devm_regulator_get_enable_read_voltage
iio: st_sensors: relax WhoAmI check in st_sensors_verify_id()
MAINTAINERS: Add AVAGO APDS9306
dt-bindings: iio: adc: adi,ad7606: comment and sort the compatible names
dt-bindings: iio: adc: adi,ad7606: add missing datasheet link
...

show more ...

dt-bindings: iio: adc: Add common-mode-channel property

There are ADCs that are differential but support to measure single-ended
signals on the same channels by connecting a constant voltage to the

dt-bindings: iio: adc: Add common-mode-channel property

There are ADCs that are differential but support to measure single-ended
signals on the same channels by connecting a constant voltage to the
negative input pin.

This property allows to properly define a single-ended channel that
requires two inputs to be specified. Software can use the presence of
this property to mark the channel as not differential.

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240607-ad4111-v7-1-97e3855900a0@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

Merge tag 'iio-for-6.11a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-testing

Jonathan writes:

IIO: 1st set of new device support, cleanups etc for 6.11

Lots of

Merge tag 'iio-for-6.11a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-testing

Jonathan writes:

IIO: 1st set of new device support, cleanups etc for 6.11

Lots of new device support and 3 entirely new drivers.

Early pull request this cycle to allow for clean picking up of fixes
that are dependencies for some queued patch sets.

Device support
==============

adi,ad3552r
- Add AD3541R and AD3551R - single output variants of already supported
DACs.

adi,ad7192
- Add support for ad7194 24-bit ADC with integrated PGA.

adi,ad7380
- New ADC driver built up in a number of steps. Supports
- 2 channel differential ADCs: AD7380, AD7381
- 4 channel differential ADCs: AD7380-4, AD7381-4
- 2 channel pseudo-differential ADCs: AD7383, AD7384
- 4 channel pseudo-differential ADCs: AD7383-4, AD7384-4

adi,adis16475
- Support ADS16501 variant - ID and some different scale factors from
parts already supported.
- Driver refactoring then enables support for 6 more IMUs:
- ADIS16575-[2,3]
- ADIS16576-[2,3]
- ADIS16577-[2,3]

adi,adsi16480
- Driver refactoring and feature additions leading to support for 6 more
IMUs - with new delta angle and delta velocity feature:
- ADIS16545-[1,2,3]
- ADIS16547-[1,2,3]

bosch,bmi160
- Support for the bmi120 IMU: ID only. Also relax ID checking to warn
only on mismatch allowing use of fallback compatibles for new devices.

sciosense,ens160
- New driver for this metal oxide multi-gas sensor for indoor
air quality monitoring.

sensortek,stk3110
- Support for stk3311a and stk3311s34 light sensor variants. Relax ID
checking to warn only on a mismatch allowing use of fallback compatibles
for new devices.

vishay,veml6040
- New driver for this RGBW light sensor. Note that whilst the register
interface is very different, the dt-binding similar enough that it is
shared with the existing vishay,veml6075 binding

x-powers,axp20x
- Add support for axp192, very similar to another supported PMIC ADC variant
but with a few more GPIO channels.

Dt-binding only
===============

ti,ads1015
- Add binding (no driver support yet) for ti,tla2021

New features
============
core
- Variable scan type support. We have papered over this for a long time
so good to finally resolve it.
Some devices will change their data output format (typically resolution)
dependent on settings such as oversampling. A new callback is added
to enable this. First used in the ad7380 driver.
- Harden the core against missing callback functions.

dt-binding:
- Add a single-channel property that can be used in per channel nodes
instead of reg to indicate which device channel. This is important
in devices with a mixture of differential and single ended channels
as reg already just acted as an index for the differential channels
making things inconsistent if it had more meaning for single ended
channels.

adi,ad7380
- Use spi_optimize_message() to reduce reading message setup overhead.
- Add oversampling support using the new core functionality to allow
a device support multiple scan types.

invense,icm42600
- Support for low-power accelerometer modes. When a given sampling
frequency is only supported at one power mode, use that. Otherwise
default to low power at the cost of some noise unless overridden
via a new sysfs attribute.

silicon-labs,si70720
- Add control of the heater.

Cleanups and minor fixes
========================

core
- Cleanup use of sizeof(struct xxxx) in favor of sizeof(*variable)

Makefile
- Resort the iio/adc/Makefile which has drifted away from alphabetical
order.

gts library
- Fix sorting of lists with a zero in the middle. Doesn't happen with
upstream drivers, but good to harden this code. Add a related unit test.

multiple drivers
- Add missing MODULE_DESCRIPTION()
- Drop some unused structure fields.
- Drop some entirely unused structure definitions.
- Stop pointless initialization of i2c_device_id::driver_data to 0 in drivers
where it isn't used.
- Use spi_get_device_match_data() to replace open-coded equivalent.

adi,ad3552r
- Fix dt gain parameter names to reflect what the driver does. Note
discussion in patch to justify fixing it in the binding not the
driver.
- Tidy up some naming.

adi,ad7192
- Use read_avail() callback to handle the low pass filter.
- Add an aincom supply for pseudo differential operation.

adi,ad7606
- Use iio_device_claim_direct_scoped() to simplify error paths.

adi,ad7944
- Drop an unused function parameter.

adi,adrf6780
- Drop unused header.

adi,ad9467
- Use a DMA safe buffer for SPI transfers.
- Stop using tabs to pad structure field names. It was creating a lot
of noise.

adi,axi-adc
- Prevent races between enable and disable calls.
- Ensure the DRP (dynamic reconfiguration port) is locked. Not used
in most real designs, but better safe than sorry.
- Limit build to COMPILE_TEST or platforms for which the IP exists.

adi,axi-dac
- Limit build to COMPILE_TEST or platforms for which the IP exists.

ams,iaq
- Use __packed instead of ___attribute__((__packed__))

bosch,bmp280
- White space cleanup.
- Use BME280 prefix for registers that do not exist on the BMP280.
- Add parameter names to callback function definitions.
- Rename measure function to better reflect what it does which is wait
for a measurement to happen.
- Drop a redundant error check.
- Improve error messages
- Make error checks consistent as if (ret)
- Use unsigned types for inherently unsigned data.
- Refactor reading functions to not rely on a hidden t_fine variable.
- Make use of cleanup.h

freescale,mma7660
- Add mount matrix support.

invense,icm42600
- Enable the regmap cache to reduce bus accesses.

amlogic,meson-saradc
- Add dt-binding support for power-domains.

ti,adc161s626
- Use iio_device_claim_direct_scoped() to simplify error handling.

* tag 'iio-for-6.11a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (107 commits)
iio: imu: inv_icm42600: add support of accel low-power mode
iio: document inv_icm42600 driver private sysfs attributes
MAINTAINERS: Add ScioSense ENS160
iio: chemical: ens160: add power management support
iio: chemical: ens160: add triggered buffer support
iio: chemical: add driver for ENS160 sensor
dt-bindings: iio: chemical: add ENS160 sensor
dt-bindings: vendor-prefixes: add ScioSense
iio: temperature: mcp9600: add threshold events support
dt-bindings: iio: light: add VEML6040 RGBW-LS
iio: light: driver for Vishay VEML6040
dt-bindings: iio: adc: amlogic,meson-saradc: add optional power-domains
iio: dac: adi-axi-dac: add platform dependencies
iio: adc: adi-axi-adc: add platform dependencies
iio: imu: inv_icm42600: add register caching in the regmap
iio: adc: mcp3564: drop redundant open-coded spi_get_device_match_data()
iio: dac: max5522: simplify with spi_get_device_match_data()
iio: addac: ad74413r: simplify with spi_get_device_match_data()
iio: adc: ti-tsc2046: simplify with spi_get_device_match_data()
iio: adc: ti-ads131e08: simplify with spi_get_device_match_data()
...

show more ...

dt-bindings: iio: adc: Add single-channel property

Devices that have both single-ended channels and differential channels
cause a bit of confusion when the channels are configured in the
devicetree.

dt-bindings: iio: adc: Add single-channel property

Devices that have both single-ended channels and differential channels
cause a bit of confusion when the channels are configured in the
devicetree.

Clarify difference between these two types of channels for such devices
by adding single-channel property alongside diff-channels. They should
be mutually exclusive.

Devices that have only single-ended channels can still use reg property
to reference a channel like before.

Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Alisa-Dariana Roman <alisa.roman@analog.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240514120222.56488-5-alisa.roman@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

Merge tag 'v6.9' into next

Sync up with the mainline to bring in the new cleanup API.

Merge drm/drm-next into drm-intel-gt-next

Some display refactoring patches are needed in order to allow conflict-
less merging.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

Merge topic branches 'clkdev' and 'fixes' into for-linus

Merge remote-tracking branch 'torvalds/master' into perf-tools-next

To pick up fixes sent via perf-tools, by Namhyung Kim.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge branch 'master' into mm-stable

Merge drm/drm-next into drm-xe-next

Backmerging drm-next in order to get up-to-date and in particular
to access commit 9ca5facd0400f610f3f7f71aeb7fc0b949a48c67.

Signed-off-by: Thomas Hellström <tho

Merge drm/drm-next into drm-xe-next

Backmerging drm-next in order to get up-to-date and in particular
to access commit 9ca5facd0400f610f3f7f71aeb7fc0b949a48c67.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

show more ...

Merge tag 'phy_dp_modes_6.10' into msm-next-lumag

Merge DisplayPort subnode API in order to allow DisplayPort driver to
configure the PHYs either to the DP or eDP mode, depending on hardware
configu

Merge tag 'phy_dp_modes_6.10' into msm-next-lumag

Merge DisplayPort subnode API in order to allow DisplayPort driver to
configure the PHYs either to the DP or eDP mode, depending on hardware
configuration.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

Merge drm/drm-next into drm-intel-next

Catching up on 6.9-rc2

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.9-rc2 changes into drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>