Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and we are stuck at 6.9 so lets bump things forward.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

show more ...

Merge branch 'linus' into x86/mm, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'next' into for-linus

Prepare input updates for 6.14 merge window.

Merge tag 'v6.13-rc3' into next

Sync up with the mainline.

Merge remote-tracking branch 'pm/opp/linux-next' into HEAD

Merge pm/opp tree to get dev_pm_opp_get_bw()

Signed-off-by: Rob Clark <robdclark@chromium.org>

Merge drm/drm-next into drm-intel-next

Catching up with 6.13-rc2.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-xe-next

A backmerge to get the PMT preparation work for
merging the BMG PMT support.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-misc-next

Kickstart 6.14 cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'v6.13-rc1' into perf/core, to refresh the branch

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'asoc-fix-v6.13-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.13

A few small fixes for v6.13, all system specific - the biggest t

Merge tag 'asoc-fix-v6.13-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.13

A few small fixes for v6.13, all system specific - the biggest thing is
the fix for jack handling over suspend on some Intel laptops.

show more ...

Merge tag 'hwmon-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hmon updates from Guenter Roeck:
"New drivers:
- ISL28022 power monitor
- Nuvoton NC

Merge tag 'hwmon-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hmon updates from Guenter Roeck:
"New drivers:
- ISL28022 power monitor
- Nuvoton NCT7363Y

Added support for new chips to existing drivers:
- The tmp180 driver now supports NXP p3t1085, including its I3C mode
- The ina2xx driver now supports SY24655 and INA260
- The amc6821 driver now supports tsd,mule

Other notable improvements:
- The sht4x driver now supports the chip heater
- The pmbus/isl68137 driver now supports a voltage divider on Vout
- The cros_ec driver registers with the thermal framework
- The pmbus/ltc2978 driver now supports LTC7841
- The PMBus core now allow drivers to override WRITE_PROTECT

Various other minor improvements and cleanups"

* tag 'hwmon-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (51 commits)
hwmon: (pmbus/isl68137) add support for voltage divider on Vout
dt-bindings: hwmon: isl68137: add bindings to support voltage dividers
hwmon: tmp108: fix I3C dependency
hwmon: (cros_ec) register thermal sensors to thermal framework
hwmon: (tmp108) Add support for I3C device
hwmon: (tmp108) Add helper function tmp108_common_probe() to prepare I3C support
hwmon: (acpi_power_meter) Fix fail to load module on platform without _PMD method
hwmon: (nct6775-core) Fix overflows seen when writing limit attributes
hwmon: (pwm-fan) Introduce start from stopped state handling
dt-bindings: hwmon: pwm-fan: Document start from stopped state properties
hwmon: (tmp108) Add NXP p3t1085 support
dt-bindings: hwmon: ti,tmp108: Add nxp,p3t1085 compatible string
hwmon: (sch5627, max31827) Fix typos in driver documentation
hwmon: (jc42) Drop of_match_ptr() protection
hwmon: (f71882fg) Fix grammar in fan speed trip points explanation
dt-bindings: hwmon: pmbus: add ti tps25990 support
hwmon: (pmbus/core) clear faults after setting smbalert mask
hwmon: (pmbus/core) allow drivers to override WRITE_PROTECT
hwmon: (pmbus) add documentation for existing flags
hwmon: (ina226) Add support for SY24655
...

show more ...

dt-bindings: hwmon: isl68137: add bindings to support voltage dividers

Add devicetree bindings to support declaring optional voltage dividers to
the rail outputs of supported digital multiphase regu

dt-bindings: hwmon: isl68137: add bindings to support voltage dividers

Add devicetree bindings to support declaring optional voltage dividers to
the rail outputs of supported digital multiphase regulators. Some
applications require Vout to exceed the voltage range that the Vsense pin
can detect. This binding definition allows users to define the
characteristics of a voltage divider placed between Vout and the Vsense
pin for any rail powered by the device.

These bindings copy the vout-voltage-divider property defined in the
maxim,max20730 bindings schema since it is the best fit for the use case
of scaling hwmon PMBus telemetry. The generic voltage-divider property
used by many iio drivers was determined to be a poor fit because that
schema is tied directly to iio for the purpose of scaling io-channel
voltages and the isl68137 driver is not an iio driver.

New schema file named isil,isl68137.yaml to align with the corresponding
driver name and pre-existing bindings ported from trivial bindings.
However, all new device bindings use renesas as the vendor prefix
since Renesas acquired Intersil and now maintains all documentation
for the devices.

Signed-off-by: Grant Peltier <grantpeltier93@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Message-ID: <f7ac200e982961ff733de27a5c4505c04d68b6f3.1731439797.git.grantpeltier93@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

show more ...