Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge branch 'ib/6.11-rc6-matrix-keypad-spitz' into next

Bring in changes removing support for platform data from matrix-keypad
driver.

Merge tag 'v6.11-rc1' into clk-meson-next

Linux 6.11-rc1

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be a

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be able to be mapped at the address specified by the "reserve_mem" command
line parameter.

Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

show more ...

Merge tag 'v6.11-rc1' into for-6.12

Linux 6.11-rc1

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter and allows further pending refactors.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Get drm-misc-next to the state of v6.11-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Sync with v6.11-rc1 in general, and specifically get the new
BACKLIGHT_POWER_ constants for power states.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'linus' into x86/mm

Bring x86 and selftests up to date

Merge drm/drm-fixes into drm-misc-fixes

Let's start the new drm-misc-fixes cycle by bringing in 6.11-rc1.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'gpio-updates-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

Pull gpio updates from Bartosz Golaszewski:
"The majority of added lines are two new modules: the

Merge tag 'gpio-updates-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

Pull gpio updates from Bartosz Golaszewski:
"The majority of added lines are two new modules: the GPIO virtual
consumer module that improves our ability to add automated tests for
the kernel API and the "sloppy" logic analyzer module that uses the
GPIO API to implement a coarse-grained debugging tool for useful for
remote development.

Other than that we have the usual assortment of various driver
extensions, improvements to the core GPIO code, DT-bindings and other
documentation updates as well as an extension to the interrupt
simulator:

GPIOLIB core:
- rework kfifo handling rework in the character device code
- improve the labeling of GPIOs requested as interrupts and show more
info on interrupt-only GPIOs in debugfs
- remove unused APIs
- unexport interfaces that are only used from the core GPIO code
- drop the return value from gpiochip_set_desc_names() as it cannot
fail
- move a string array definition out of a header and into a specific
compilation unit
- convert the last user of gpiochip_get_desc() other than GPIO core
to using a safer alternative
- use array_index_nospec() where applicable

New drivers:
- add a "virtual GPIO consumer" module that allows requesting GPIOs
from actual hardware and driving tests of the in-kernel GPIO API
from user-space over debugfs
- add a GPIO-based "sloppy" logic analyzer module useful for "first
glance" debugging on remote boards

Driver improvements:
- add support for a new model to gpio-pca953x
- lock GPIOs as interrupts in gpio-sim when the lines are requested
as irqs via the simulator domain + some other minor improvements
- improve error reporting in gpio-syscon
- convert gpio-ath79 to using dynamic GPIO base and range
- use pcibios_err_to_errno() for converting PCIBIOS error codes to
errno vaues in gpio-amd8111 and gpio-rdc321x
- allow building gpio-brcmstb for the BCM2835 architecture

DT bindings:
- convert DT bindings for lsi,zevio, mpc8xxx, and atmel to DT schema
- document new properties for aspeed,gpio, fsl,qoriq-gpio and
gpio-vf610
- document new compatibles for pca953x and fsl,qoriq-gpio

Documentation:
- document stricter behavior of the GPIO character device uAPI with
regards to reconfiguring requested line without direction set
- clarify the effect of the active-low flag on line values and edges
- remove documentation for the legacy GPIO API in order to stop
tempting people to use it
- document the preference for using pread() for reading edge events
in the sysfs API

Other:
- add an extended initializer to the interrupt simulator allowing to
specify a number of callbacks callers can use to be notified about
irqs being requested and released"

* tag 'gpio-updates-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (41 commits)
gpio: mc33880: Convert comma to semicolon
gpio: virtuser: actually use the "trimmed" local variable
dt-bindings: gpio: convert Atmel GPIO to json-schema
gpio: virtuser: new virtual testing driver for the GPIO API
dt-bindings: gpio: vf610: Allow gpio-line-names to be set
gpio: sim: lock GPIOs as interrupts when they are requested
genirq/irq_sim: add an extended irq_sim initializer
dt-bindings: gpio: fsl,qoriq-gpio: Add compatible string fsl,ls1046a-gpio
gpiolib: unexport gpiochip_get_desc()
gpio: add sloppy logic analyzer using polling
Documentation: gpio: Reconfiguration with unset direction (uAPI v2)
Documentation: gpio: Reconfiguration with unset direction (uAPI v1)
dt-bindings: gpio: fsl,qoriq-gpio: add common property gpio-line-names
gpio: ath79: convert to dynamic GPIO base allocation
pinctrl: da9062: replace gpiochip_get_desc() with gpio_device_get_desc()
gpiolib: put gpio_suffixes in a single compilation unit
Documentation: gpio: Clarify effect of active low flag on line edges
Documentation: gpio: Clarify effect of active low flag on line values
gpiolib: Remove data-less gpiochip_add() function
gpio: sim: use devm_mutex_init()
...

show more ...

dt-bindings: gpio: lsi,zevio-gpio: convert to dtschema

Convert Zevio GPIO Controller from text to dtschema.
Adding `interrupts` property fixes the following warning:
linux/out/arch/arm/boot/dts/nspi

dt-bindings: gpio: lsi,zevio-gpio: convert to dtschema

Convert Zevio GPIO Controller from text to dtschema.
Adding `interrupts` property fixes the following warning:
linux/out/arch/arm/boot/dts/nspire/nspire-tp.dtb: gpio@90000000:
'interrupts' does not match any of the regexes: 'pinctrl-[0-9]+'`
while executing `make dtbs_check` on Texas Instruments
nspire boards.

Signed-off-by: Pratik Farkase <pratik.farkase@wsisweden.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240522151616.27397-1-pratik.farkase@wsisweden.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

show more ...