Merge remote-tracking branch 'linusw-gpio/for-next' into devm_gpiochip

Base for demv_gpiochip_add_data() and devm_gpiochip_remove().

Merge branch 'next' into for-linus

Prepare first round of input updates for 4.3 merge window.

Merge branch 'for-4.3/gembird' into for-linus

Merge tag 'v4.2-rc8' into x86/mm, before applying new changes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'for-linus' into for-next

... to make easier developing HDA ext code.

Merge tag 'asoc-fix-v4.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v4.2

A lot of small fixes here, a few to the core:

- Fix for binding DA

Merge tag 'asoc-fix-v4.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v4.2

A lot of small fixes here, a few to the core:

- Fix for binding DAPM stream widgets on devices with prefixes assigned
to them
- Minor fixes for the newly added topology interfaces
- Locking and memory leak fixes for DAPM
- Driver specific fixes

show more ...

Merge tag 'v4.2-rc3' into next

Sync up with Linux 4.2-rc3 to bring in infrastructure (OF) pieces.

Merge tag 'drm-intel-fixes-2015-07-15' into drm-intel-next-queued

Backmerge fixes since it's getting out of hand again with the massive
split due to atomic between -next and 4.2-rc. All the bugfixes

Merge tag 'drm-intel-fixes-2015-07-15' into drm-intel-next-queued

Backmerge fixes since it's getting out of hand again with the massive
split due to atomic between -next and 4.2-rc. All the bugfixes in
4.2-rc are addressed already (by converting more towards atomic
instead of minimal duct-tape) so just always pick the version in next
for the conflicts in modeset code.

All the other conflicts are just adjacent lines changed.

Conflicts:
drivers/gpu/drm/i915/i915_drv.h
drivers/gpu/drm/i915/i915_gem_gtt.c
drivers/gpu/drm/i915/intel_display.c
drivers/gpu/drm/i915/intel_drv.h
drivers/gpu/drm/i915/intel_ringbuffer.h

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

show more ...

Merge branches 'fixes' and 'ioremap' into for-linus

Merge 4.2-rc1 into MTD -next

Merge branch 'fixes-rc1' into omap-for-v4.2/fixes

Merge tag 'v4.2-rc1' into patchwork

Linux 4.2-rc1

* tag 'v4.2-rc1': (12415 commits)
Linux 4.2-rc1
bluetooth: fix list handling
9p: cope with bogus responses from server in p9_client_{read,wri

Merge tag 'v4.2-rc1' into patchwork

Linux 4.2-rc1

* tag 'v4.2-rc1': (12415 commits)
Linux 4.2-rc1
bluetooth: fix list handling
9p: cope with bogus responses from server in p9_client_{read,write}
p9_client_write(): avoid double p9_free_req()
9p: forgetting to cancel request on interrupted zero-copy RPC
dax: bdev_direct_access() may sleep
block: Add support for DAX reads/writes to block devices
dax: Use copy_from_iter_nocache
dax: Add block size note to documentation
NTB: Add split BAR output for debugfs stats
NTB: Change WARN_ON_ONCE to pr_warn_once on unsafe
NTB: Print driver name and version in module init
NTB: Increase transport MTU to 64k from 16k
NTB: Rename Intel code names to platform names
NTB: Default to CPU memcpy for performance
NTB: Improve performance with write combining
NTB: Use NUMA memory in Intel driver
NTB: Use NUMA memory and DMA chan in transport
NTB: Rate limit ntb_qp_link_work
NTB: Add tool test client
...

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

1) Add TX fast path in mac80211, from Johannes Berg.

2) Add TSO/GRO support to ibmve

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

1) Add TX fast path in mac80211, from Johannes Berg.

2) Add TSO/GRO support to ibmveth, from Thomas Falcon

3) Move away from cached routes in ipv6, just like ipv4, from Martin
KaFai Lau.

4) Lots of new rhashtable tests, from Thomas Graf.

5) Run ingress qdisc lockless, from Alexei Starovoitov.

6) Allow servers to fetch TCP packet headers for SYN packets of new
connections, for fingerprinting. From Eric Dumazet.

7) Add mode parameter to pktgen, for testing receive. From Alexei
Starovoitov.

8) Cache access optimizations via simplifications of build_skb(), from
Alexander Duyck.

9) Move page frag allocator under mm/, also from Alexander.

10) Add xmit_more support to hv_netvsc, from KY Srinivasan.

11) Add a counter guard in case we try to perform endless reclassify
loops in the packet scheduler.

12) Extern flow dissector to be programmable and use it in new "Flower"
classifier. From Jiri Pirko.

13) AF_PACKET fanout rollover fixes, performance improvements, and new
statistics. From Willem de Bruijn.

14) Add netdev driver for GENEVE tunnels, from John W Linville.

15) Add ingress netfilter hooks and filtering, from Pablo Neira Ayuso.

16) Fix handling of epoll edge triggers in TCP, from Eric Dumazet.

17) Add an ECN retry fallback for the initial TCP handshake, from Daniel
Borkmann.

18) Add tail call support to BPF, from Alexei Starovoitov.

19) Add several pktgen helper scripts, from Jesper Dangaard Brouer.

20) Add zerocopy support to AF_UNIX, from Hannes Frederic Sowa.

21) Favor even port numbers for allocation to connect() requests, and
odd port numbers for bind(0), in an effort to help avoid
ip_local_port_range exhaustion. From Eric Dumazet.

22) Add Cavium ThunderX driver, from Sunil Goutham.

23) Allow bpf programs to access skb_iif and dev->ifindex SKB metadata,
from Alexei Starovoitov.

24) Add support for T6 chips in cxgb4vf driver, from Hariprasad Shenai.

25) Double TCP Small Queues default to 256K to accomodate situations
like the XEN driver and wireless aggregation. From Wei Liu.

26) Add more entropy inputs to flow dissector, from Tom Herbert.

27) Add CDG congestion control algorithm to TCP, from Kenneth Klette
Jonassen.

28) Convert ipset over to RCU locking, from Jozsef Kadlecsik.

29) Track and act upon link status of ipv4 route nexthops, from Andy
Gospodarek.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1670 commits)
bridge: vlan: flush the dynamically learned entries on port vlan delete
bridge: multicast: add a comment to br_port_state_selection about blocking state
net: inet_diag: export IPV6_V6ONLY sockopt
stmmac: troubleshoot unexpected bits in des0 & des1
net: ipv4 sysctl option to ignore routes when nexthop link is down
net: track link-status of ipv4 nexthops
net: switchdev: ignore unsupported bridge flags
net: Cavium: Fix MAC address setting in shutdown state
drivers: net: xgene: fix for ACPI support without ACPI
ip: report the original address of ICMP messages
net/mlx5e: Prefetch skb data on RX
net/mlx5e: Pop cq outside mlx5e_get_cqe
net/mlx5e: Remove mlx5e_cq.sqrq back-pointer
net/mlx5e: Remove extra spaces
net/mlx5e: Avoid TX CQE generation if more xmit packets expected
net/mlx5e: Avoid redundant dev_kfree_skb() upon NOP completion
net/mlx5e: Remove re-assignment of wq type in mlx5e_enable_rq()
net/mlx5e: Use skb_shinfo(skb)->gso_segs rather than counting them
net/mlx5e: Static mapping of netdev priv resources to/from netdev TX queues
net/mlx4_en: Use HW counters for rx/tx bytes/packets in PF device
...

show more ...

Merge remote-tracking branch 'net-next/master' into mac80211-next

Merge back net-next to get wireless driver changes (from Kalle)
to be able to create the API change across all trees properly.

Sign

Merge remote-tracking branch 'net-next/master' into mac80211-next

Merge back net-next to get wireless driver changes (from Kalle)
to be able to create the API change across all trees properly.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

Merge tag 'linux-can-next-for-4.2-20150506' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2015-05-06

this

Merge tag 'linux-can-next-for-4.2-20150506' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2015-05-06

this is a pull request of a seven patches for net-next/master.

Andreas Gröger contributes two patches for the janz-ican3 driver. In
the first patch, the documentation for already existing sysfs entries
is added, the second patch adds support for another module/firmware
variant. A patch by Shawn Landden makes the padding in the struct
can_frame explicit. The next 4 patches target the flexcan driver, the
first one is by David Jander adding some documentation, the reaming
three by me add more documentation and two small code cleanups.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

can: janz-ican3: add support for CAL/CANopen firmware

In our department we are using some older Janz ICAN3-modules in our dekstop
pcs. There we have slightly different carrier boards than the janz-c

can: janz-ican3: add support for CAL/CANopen firmware

In our department we are using some older Janz ICAN3-modules in our dekstop
pcs. There we have slightly different carrier boards than the janz-cmodio
supported in the kernel sources, called CAN-PCI2 with two submodules. But the
pci configuration regions are identical. So extending the supported pci devices
to the corresponding device ids is sufficient to get the drivers working.

* The old ICAN3-modules with firmware 1.28 need more then 250ms for the restart
after reset. I've increased the timeout to 500ms.
* The janz_ican3 module uses the raw can services of the Janz-firmware, this
means firmware must be ICANOS/2. Our ICAN3-modules are equipped with
CAL/CANopen-firmware, so I must use the appropriate commands for the layer
management services.

Te driver detects the firmware after module reset and selects the commands
matching the firmware. This affects the bus on/off-command
(ican3_set_bus_state) and the configuration of the bittiming
(ican3_set_bittiming). For better diagnostics the detected firmware string is
presented as sysfs attribute (fwinfo).

Signed-off-by: Andreas Gröger <andreas24groeger@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

show more ...

can: janz-ican3: add documentation for existing sysfs entries

This patch adds documentation for the existing sysfs entries for the janz PCI
module.

Signed-off-by: Andreas Gröger <andreas24groeger@g

can: janz-ican3: add documentation for existing sysfs entries

This patch adds documentation for the existing sysfs entries for the janz PCI
module.

Signed-off-by: Andreas Gröger <andreas24groeger@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

show more ...