Merge drm/drm-fixes into drm-misc-fixes

Updating drm-misc-fixes to the state of v6.17-rc1. Begins a new release
cycle.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'char-misc-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char / misc / IIO / other driver updates from Greg KH:
"Here is the big set of char/misc/iio an

Merge tag 'char-misc-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char / misc / IIO / other driver updates from Greg KH:
"Here is the big set of char/misc/iio and other smaller driver
subsystems for 6.17-rc1. It's a big set this time around, with the
huge majority being in the iio subsystem with new drivers and dts
files being added there.

Highlights include:
- IIO driver updates, additions, and changes making more code const
and cleaning up some init logic
- bus_type constant conversion changes
- misc device test functions added
- rust miscdevice minor fixup
- unused function removals for some drivers
- mei driver updates
- mhi driver updates
- interconnect driver updates
- Android binder updates and test infrastructure added
- small cdx driver updates
- small comedi fixes
- small nvmem driver updates
- small pps driver updates
- some acrn virt driver fixes for printk messages
- other small driver updates

All of these have been in linux-next with no reported issues"

* tag 'char-misc-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
binder: Use seq_buf in binder_alloc kunit tests
binder: Add copyright notice to new kunit files
misc: ti_fpc202: Switch to of_fwnode_handle()
bus: moxtet: Use dev_fwnode()
pc104: move PC104 option to drivers/Kconfig
drivers: virt: acrn: Don't use %pK through printk
comedi: fix race between polling and detaching
interconnect: qcom: Add Milos interconnect provider driver
dt-bindings: interconnect: document the RPMh Network-On-Chip Interconnect in Qualcomm Milos SoC
mei: more prints with client prefix
mei: bus: use cldev in prints
bus: mhi: host: pci_generic: Add Telit FN990B40 modem support
bus: mhi: host: Detect events pointing to unexpected TREs
bus: mhi: host: pci_generic: Add Foxconn T99W696 modem
bus: mhi: host: Use str_true_false() helper
bus: mhi: host: pci_generic: Add support for EM929x and set MRU to 32768 for better performance.
bus: mhi: host: Fix endianness of BHI vector table
bus: mhi: host: pci_generic: Disable runtime PM for QDU100
bus: mhi: host: pci_generic: Fix the modem name of Foxconn T99W640
dt-bindings: interconnect: qcom,msm8998-bwmon: Allow 'nonposted-mmio'
...

show more ...

Merge tag 'iio-for-6.17a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

IIO: New device support, features, late breaking fixes and cleanup for

Merge tag 'iio-for-6.17a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

IIO: New device support, features, late breaking fixes and cleanup for 6.17

The normal mixed bag. A few more fixes than usual as I failed to send
them out earlier.

New device support
==================

adi,ad4080
- New driver for this high speed ADC. Includes extensions to iio-backends
necessary to support filter config, variable data lands and data
alignment control.
adi,ad4170-4
- New driver for this 24-bit very feature rich ADC suited for weigh scale
and thermocouple applications.
adi,ad7405
- New driver for this single channel isolated ADC with backend support
(adi-axi-adc)
google,cros_ec_activity
- Add activity detection to the existing set of cros_ec drivers covering
both human body and significant motion detection.
mediatek,mt6359
- Add support for MT6363 and MT6373 PMIC Auxiliary ADCs.
nicera,d3-323-aa
- New driver for this configurable Passive InfraRed sensor.

Device ID only
==============

mediatek,mt7981-auxadc
- Add ID to mt2701 driver as fully compatible with mt7986-auxadc.
rohm,bu79100g
- Add ID to ad7476 driver as fully compatible with TI ADS7866.

Features
========
Core
- New in_voltageY_convdelay to allow for devices to control timing
offsets between sampling different channels.
adi,ad-sigma-delta-library
- Support SPI offload (later fix for missing Kconfig dependency)
adi,ad4851
- SPI 3-wire support.
adi,ad7606
- Power supply control.
- convdelay and calibbias support for calibration purposes.
- gain calibration support based on external filter resistance provided
from device tree.
adi,ad7768-1
- Add output regulator for VCM output, typically used for preconditioning
circuits.
- Add gpio controller for the 4 GPIOs.
- Multiple scan type support to enable 16-bit modes.
- Support synchronization over SPI.
- Filter type and oversampling ratio control.
- Low pass filter cut off read only attribute.
adi,adxl313
- FIFO support
- DC activity, inactivity detection with power-save on inactivity
- AC coupled activity detection
- Documentation for this complex driver.
- debugfs register access.
adi,adxl345
- Sampling frequency and sensor range controls.
bosch,bmi270
- Add step counter support.
invensense,icm42600
- Wake on motion support.

Cleanup and fixes
=================

backend
- Drop unused parameter from iio_backend_ovesampling_ratio_set()
docs
- Fix ABI docs around I and Q modifiers.
treewide
- Switch remaining drives to use maple tree regcache.
- Drop use of DRIVER_NAME style definitions when only used in one
place.
- Drop unused export.h includes.
- Use = { } in place of memset in various drivers.
- Constify various info structures and related.
- Switch some drivers from array of chip_info structures to individual
named structures.
adi,ad-sigma_delta library
- Fix over allocation of scan buffer. (bits/bytes confusion)
- Sort includes and apply iwyu principles to ensure sensible set.
- Use u8 instead of uint8_t
- Replace hard coded type sizes with sizeof() and BITS_TO_BYTES() as
appropriate.
- Factor out setting of read address to reduce duplication.
- Switch to buffer predisable so error handling on buffer enable
functions correctly (balanced against postenable).
adi,ad4000
- Don't use sift_right() on an unsigned value.
adi,ad7173
- Add missing check on spi_setup() succeeding.
- Simplify clock enable disable code using devm_clk_get_enabled()
- Fix channel index for syscalib_mode
- Fix number of configuration slots for some devics.
- Fix the channel used for calibration.
- Fix setting ODR up in probe.
adi,ad7380
- Drop unused oversampling_ratio getter function call as value never
used.
adi,ad7606
- Exit if invalid dt_schema encountered rather than carrying on with
unknown config.
adi,ad7768-1
- Ensure SYNC_IN pulse is long enough.
- Switch sampling_frequency_available to read_avail() callback.
adi,ada4250
- Ensuring a dma-safe buffer for regmap_bulk_read()
- Use a local dev variable to simplify code
- Relax chip ID matching to allow for fallback dt compatibles.
- Make use of devm_regulator_get_enabled_read_voltage() to replace
equivalent code.
- Shuffle elements around in struct to improve logical groupings and
reduce holes.
- Use dev_err_probe()
adi,adxl313
- Use regcache to reduce traffic.
- Factor out enabling of measurement.
adi,adxl345
- Drop irq from struct as only used locally in code
- Simplify measure enable function using regmap_update_bits()
- Replace some magic numbers by units.h defines
- Simplify interrupt mapping code
- Simplify FIFO read out.
adi,axi-dac
- Factor out code to check for bus free to reduce duplication.
avago,apds9306
- Use a helper to get register address in both get and set functions.
bosch,bmi160+bmi270
- Ensure triggers suspended and resumed correctly.
bosch,bmo055
- Fix theoretical OOB acces to hw_xlate array.
freescale,vf610
- Drop -ENOMEM error message as plenty of existing prints if memory
allocation fails.
- Use dev_err_probe() and devm_clk_geT_enabled() to simplify probe().
kionix,kx022a
- Apply include what you use principles to includes.
invensense,itg3200
- Add missing dt-binding for this gyroscope.
invensense,icm42600
- Switch from int64_t and similar to s64 and other kernel types.
- Simplify arrangement of DMA safe buffers and potentially reduce
structure size a little.
invensense,mpu6050
- Reduce duplication in aux read/write code.
- Use sysfs_emit() to replace scnprintf()
murata,irsd200
- Drop duplicate printing of ret in dev_err_probe()
nxp,lpc3220-adc
- Add missing clocks property to dt-binding.
st,spear600
- Convert dt-binding that got left behind in staging to yaml in the main
tree.
st,stm32-adc
- Use dev_fwnode() rather than directly accessing the of_node.
vti,sca3000
- Use direct returns instead of gotos where simple.

Various other minor typo and white space fixes.

* tag 'iio-for-6.17a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (201 commits)
iio: adc: ad_sigma_delta: Select IIO_BUFFER_DMAENGINE and SPI_OFFLOAD
iio: adc: ad7173: fix setting ODR in probe
iio: adc: ad7173: fix calibration channel
iio: adc: ad7173: fix num_slots
iio: adc: ad7173: fix channels index for syscalib_mode
iio: adc: ad_sigma_delta: change to buffer predisable
iio: ABI: fix correctness of I and Q modifiers
iio: Add driver for Nicera D3-323-AA PIR sensor
dt-bindings: iio: proximity: Add Nicera D3-323-AA PIR sensor
dt-bindings: vendor-prefixes: Add Nicera
iio: dac: vf610: Simplify with devm_clk_get_enabled()
iio: adc: vf610: Simplify with dev_err_probe
iio: adc: vf610: Drop -ENOMEM error message
iio: imu: bno055: make bno055_sysfs_attr const
iio: imu: bno055: fix OOB access of hw_xlate array
dt-bindings: iio: adc: Add support for MT7981
iio: accel: kionix-kx022a: Apply approximate iwyu principles to includes
iio: adc: ad4170-4: Add support for weigh scale, thermocouple, and RTD sens
iio: adc: ad4170-4: Add support for internal temperature sensor
iio: adc: ad4170-4: Add GPIO controller support
...

show more ...

iio: ABI: fix correctness of I and Q modifiers

Update the IIO ABI documentation to reflect the actual usage of channels
with I and Q modifiers. These are currently only used in a few drivers:

frequ

iio: ABI: fix correctness of I and Q modifiers

Update the IIO ABI documentation to reflect the actual usage of channels
with I and Q modifiers. These are currently only used in a few drivers:

frequency/admv1013 (kernel v5.17):
- in_altvoltageY-altvoltageZ_i_calibphase
- in_altvoltageY-altvoltageZ_q_calibphase
- in_altvoltageY_i_calibbias
- in_altvoltageY_q_calibbias
frequency/admv1014 (kernel v5.18):
- in_altvoltageY_i_phase
- in_altvoltageY_q_phase
- in_altvoltageY_i_offset
- in_altvoltageY_q_offset
- in_altvoltageY_i_calibscale_course
- in_altvoltageY_i_calibscale_fine
- in_altvoltageY_q_calibscale_course
- in_altvoltageY_q_calibscale_fine
frequency/adrf6780 (kernel v5.16):
- out_altvoltageY_i_phase
- out_altvoltageY_q_phase

There are no _raw or _scale attributes in use, so those are all removed.
There are no currentY attributes in use with these modifiers, so those
are also removed. All of the voltageY are changed to altvoltageY since
that is how they are actually used. None of these channels are used
with scan buffers, so all of those attributes are removed as well. And
the {in,out}_altvoltageY_{i,q}_phase attributes were missing so those
are added.

The differential channel names for admv1013 are fixed.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250711-iio-abi-fix-i-and-q-modifiers-v1-1-35963c9c8c01@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

Merge tag 'v5.18'

Linux 5.18

Merge tag 'v5.17-rc4' into for-linus

Merge with mainline to get the Intel ASoC generic helpers header and
other changes.

Merge tag 'v5.16' into next

Sync up with mainline to bring in the latest API changes.

Merge branch 'next' into for-linus

Prepare input updates for 5.17 merge window.

Merge branch 'for-next' into for-linus

Pull 5.17 materials.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to bring drm-misc-next-fixes up to the latest state for
the current release cycle.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'reset/of-get-optional-exclusive' of git://git.pengutronix.de/pza/linux into timers/drivers/next

"Add optional variant of of_reset_control_get_exclusive(). If the
requested reset is not

Merge branch 'reset/of-get-optional-exclusive' of git://git.pengutronix.de/pza/linux into timers/drivers/next

"Add optional variant of of_reset_control_get_exclusive(). If the
requested reset is not specified in the device tree, this function
returns NULL instead of an error."

This dependency is needed for the Generic Timer Module (a.k.a OSTM)
support for RZ/G2L.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

show more ...

Merge tag 'v5.15' into next

Sync up with the mainline to get the latest APIs and DT bindings.

Merge drm/drm-next into drm-intel-next

Sync up with drm-next to get v5.16-rc2.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-intel-gt-next

Thomas needs the dma_resv_for_each_fence API for i915/ttm async migration
work.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

Merge drm/drm-next into drm-misc-next

Backmerging from drm/drm-next for v5.16-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-fixes into drm-misc-fixes

We need -rc1 to address a breakage in drm/scheduler affecting panfrost.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge remote-tracking branch 'torvalds/master' into perf/core

To pick up some tools/perf/ patches that went via tip/perf/core, such
as:

tools/perf: Add mem_hops field in perf_mem_data_src structu

Merge remote-tracking branch 'torvalds/master' into perf/core

To pick up some tools/perf/ patches that went via tip/perf/core, such
as:

tools/perf: Add mem_hops field in perf_mem_data_src structure

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge tag 'driver-core-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 5.16-rc1.

Merge tag 'driver-core-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 5.16-rc1.

All of these have been in linux-next for a while now with no reported
problems.

Included in here are:

- big update and cleanup of the sysfs abi documentation files and
scripts from Mauro. We are almost at the place where we can
properly check that the running kernel's sysfs abi is documented
fully.

- firmware loader updates

- dyndbg updates

- kernfs cleanups and fixes from Christoph

- device property updates

- component fix

- other minor driver core cleanups and fixes"

* tag 'driver-core-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (122 commits)
device property: Drop redundant NULL checks
x86/build: Tuck away built-in firmware under FW_LOADER
vmlinux.lds.h: wrap built-in firmware support under FW_LOADER
firmware_loader: move struct builtin_fw to the only place used
x86/microcode: Use the firmware_loader built-in API
firmware_loader: remove old DECLARE_BUILTIN_FIRMWARE()
firmware_loader: formalize built-in firmware API
component: do not leave master devres group open after bind
dyndbg: refine verbosity 1-4 summary-detail
gpiolib: acpi: Replace custom code with device_match_acpi_handle()
i2c: acpi: Replace custom function with device_match_acpi_handle()
driver core: Provide device_match_acpi_handle() helper
dyndbg: fix spurious vNpr_info change
dyndbg: no vpr-info on empty queries
dyndbg: vpr-info on remove-module complete, not starting
device property: Add missed header in fwnode.h
Documentation: dyndbg: Improve cli param examples
dyndbg: Remove support for ddebug_query param
dyndbg: make dyndbg a known cli param
dyndbg: show module in vpr-info in dd-exec-queries
...

show more ...

ABI: obsolete/sysfs-bus-iio: add some missing blank lines

Avoid those warnings:
Documentation/ABI/obsolete/sysfs-bus-iio:171: WARNING: Unexpected indentation.
Documentation/ABI/obsolete/sysfs-bus-

ABI: obsolete/sysfs-bus-iio: add some missing blank lines

Avoid those warnings:
Documentation/ABI/obsolete/sysfs-bus-iio:171: WARNING: Unexpected indentation.
Documentation/ABI/obsolete/sysfs-bus-iio:12: WARNING: Unexpected indentation.
Documentation/ABI/obsolete/sysfs-bus-iio:2: WARNING: Unexpected indentation.
Documentation/ABI/obsolete/sysfs-bus-iio:149: WARNING: Unexpected indentation.

Fixes: caf0fb3bb38a ("iio: Documentation: move incompatible ABI to obsolete")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/602c52c3fb957b9d7d6b72292dc86d295b50c881.1632750608.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge branch 'for-5.15-printk-index' into for-linus

Merge branch 'perf/urgent' into perf/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'v5.14-rc6' into locking/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Backmerge remote-tracking branch 'drm/drm-next' into drm-misc-next

Required bump from v5.13-rc3 to v5.14-rc3, and to pick up sysfb compilation fixes.

Signed-off-by: Maarten Lankhorst <maarten.lankh

Backmerge remote-tracking branch 'drm/drm-next' into drm-misc-next

Required bump from v5.13-rc3 to v5.14-rc3, and to pick up sysfb compilation fixes.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Catching up with 5.14-rc1 and also preparing for a
needed common topic branch for the "Minor revid/stepping
and workaround cleanup"

Reference: https://patc

Merge drm/drm-next into drm-intel-gt-next

Catching up with 5.14-rc1 and also preparing for a
needed common topic branch for the "Minor revid/stepping
and workaround cleanup"

Reference: https://patchwork.freedesktop.org/series/92299/
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Catching up with 5.14-rc1

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>