uart_snps: Register a device xref for UARTs

This is useful for other drivers to be able to find the UART (such as
the case of UARTs where hardware flow control lines are handled by
another device.)

uart_snps: Register a device xref for UARTs

This is useful for other drivers to be able to find the UART (such as
the case of UARTs where hardware flow control lines are handled by
another device.)

Sponsored by: Juniper Networks, Inc.
MFC after: 1 week
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D44532

show more ...

sys: Simplify enabling EARLY_PRINTF uarts

Support selecting the early uart with "options EARLY_PRINTF=foo" in
the kernel configuration file. This allows us to not have to change
source files when en

sys: Simplify enabling EARLY_PRINTF uarts

Support selecting the early uart with "options EARLY_PRINTF=foo" in
the kernel configuration file. This allows us to not have to change
source files when enabling EARLY_PRINTF, simplifying enabling it.

New uart drivers can be enabled by defining a new early_printf_foo
value to be unique, then using "#if CHECK_EARLY_PRINTF(foo)" to decide
when to enable the uart.

While here add pl011 early printf support.

Reviewed by: imp (earlier version)
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D43360

show more ...

uart(4): Honor hardware state of NS8250-class for tsw_busy

In 9750d9e5, I brought the equivalent of the TS_BUSY flag back in a
mostly hardware-agnostic way in order to fix tty_drain() and, thus,
TIO

uart(4): Honor hardware state of NS8250-class for tsw_busy

In 9750d9e5, I brought the equivalent of the TS_BUSY flag back in a
mostly hardware-agnostic way in order to fix tty_drain() and, thus,
TIOCDRAIN for UARTs with TX FIFOs. This proved to be sufficient for
fixing the regression reported. So in light of the release cycle of
FreeBSD 10.3, I decided that this change was be good enough for the
time being and opted to go with the smallest possible yet generic
(for all UARTs driven by uart(4)) solution addressing the problem at
hand.

However, at least for the NS8250-class the above isn't a complete
fix as these UARTs only trigger an interrupt when the TX FIFO became
empty. At this point, there still can be an outstanding character
left in the transmit shift register as indicated via the LSR. Thus,
this change adds the 3rd (besides the tty(4) and generic uart(4) bits)
part I had in my tree ever since, adding a uart_txbusy method to be
queried in addition for tsw_busy and hooking it up as appropriate
for the NS8250-class.

As it turns out, the exact equivalent of this 3rd part later on was
implemented for uftdi(4) in 9ad221a5.

While at it, explain the rational behind the deliberately missing
locking in uart_tty_busy() (also applying to the generic sc_txbusy
testing already present).

show more ...

hwreset: Move reset code in dev/hwreset

We've removed kernel option EXT_RESOURCES almost two years ago.
While it was ok to have some code under a common 'extres' subdirectory
at first, we now have a

hwreset: Move reset code in dev/hwreset

We've removed kernel option EXT_RESOURCES almost two years ago.
While it was ok to have some code under a common 'extres' subdirectory
at first, we now have a lot of consumer of it and we made it mandatory
so no need to have it under a cryptic name.

Reviewed by: imp
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D43192

show more ...

clk: Move clock code in dev/clk

We've removed kernel option EXT_RESOURCES almost two years ago.
While it was ok to have some code under a common 'extres' subdirectory
at first, we now have a lot of

clk: Move clock code in dev/clk

We've removed kernel option EXT_RESOURCES almost two years ago.
While it was ok to have some code under a common 'extres' subdirectory
at first, we now have a lot of consumer of it and we made it mandatory
so no need to have it under a cryptic name.

Reviewed by: mhorne
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D43191

show more ...

sys: Automated cleanup of cdefs and other formatting

Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.

Remov

sys: Automated cleanup of cdefs and other formatting

Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.

Remove /^#if.*\n#endif.*\n#include\s+<sys/cdefs.h>.*\n/
Remove /\n+#include\s+<sys/cdefs.h>.*\n+#if.*\n#endif.*\n+/
Remove /\n+#if.*\n#endif.*\n+/
Remove /^#if.*\n#endif.*\n/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/types.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/param.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/capsicum.h>/

Sponsored by: Netflix

show more ...

sys: Remove $FreeBSD$: one-line .c pattern

Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/

sys: Remove $FreeBSD$: two-line .h pattern

Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/

uart_dev_snps: Fix device probing

The "uart_bus_probe" function is used as a generic part of uart probe
logic. It returns a driver priority(negative number) if successful and
an error code otherwise

uart_dev_snps: Fix device probing

The "uart_bus_probe" function is used as a generic part of uart probe
logic. It returns a driver priority(negative number) if successful and
an error code otherwise.
Fix the error checking condition to account for that.
Also, while here return "BUS_PROBE_VENDOR", instead of "0".
This fixes uart on clearfog pro with recent DT.

PR: 266657
Reviewed by: mw
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D36880

show more ...

Remove unused uart_devclass.

uart_dev_snps: Make ext_resources non-optional

EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.

MFC after: 1 month
Differenti

uart_dev_snps: Make ext_resources non-optional

EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.

MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33828

show more ...

Remove "all rights reserved" from copyright for the file that Jared McNeill
own. He gave me permission to do this.

Merge ^/head r339015 through r339669.

Update Armada 38x UART device tree binding

Recent changes in Linux updated Marvell Armada 38x
UART compatible string. As a result the FreeBSD driver
(uart_dev_snps) does not probe. This commit fixes

Update Armada 38x UART device tree binding

Recent changes in Linux updated Marvell Armada 38x
UART compatible string. As a result the FreeBSD driver
(uart_dev_snps) does not probe. This commit fixes the
situation, however not applying any functional modification
to the driver methods.

Approved by: re (kib)
Obtained from: Semihalf

show more ...

Merge ^/head r338026 through r338297, and resolve conflicts.

add snps IP uart support / genaralize UART

This is an amalgam of a patch by Doug Ambrisko to
generalize uart_acpi_find_device, imp moving the
ACPI table to uart_dev_ns8250.c and advice by jhb
to wor

add snps IP uart support / genaralize UART

This is an amalgam of a patch by Doug Ambrisko to
generalize uart_acpi_find_device, imp moving the
ACPI table to uart_dev_ns8250.c and advice by jhb
to work around a bug in the EPYC 3151 BIOS
(the BIOS incorrectly marks the serial ports as
disabled)

Reviewed by: imp
MFC after: 8 weeks
Differential Revision: https://reviews.freebsd.org/D16432

show more ...

Now that we set the busy_detect bit in the bas to support setting it
for the console, set our override in the bas as well.

Tested by: emaste@

uart_snps: Add early printf support

Move the allwinner early printf support to the snps driver as it
should work with all implementation.
While here add instruction for enabling it on 64bits SoCs.

Merge ^/head r327169 through r327340.

Do pass removing some write-only variables from the kernel.

This reduces noise when kernel is compiled by newer GCC versions,
such as one used by external toolchain ports.

Reviewed by: kib, andrew(

Do pass removing some write-only variables from the kernel.

This reduces noise when kernel is compiled by newer GCC versions,
such as one used by external toolchain ports.

Reviewed by: kib, andrew(sys/arm and sys/arm64), emaste(partial), erj(partial)
Reviewed by: jhb (sys/dev/pci/* sys/kern/vfs_aio.c and sys/kern/kern_synch.c)
Differential Revision: https://reviews.freebsd.org/D10385

show more ...

Merge ^/head r314270 through r314419.

Allow setting access-width for UART registers.

This is required for FDT's standard "reg-io-width" property
(similar to "reg-shift" property) found in many DTS files.

This fixes operation on Altera

Allow setting access-width for UART registers.

This is required for FDT's standard "reg-io-width" property
(similar to "reg-shift" property) found in many DTS files.

This fixes operation on Altera Arria 10 SOC Development Kit,
where standard ns8250 uart allows 4-byte access only.

Reviewed by: kan, marcel
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D9785

show more ...

Revert r314212 as it break Allwinner boards.

Reported by: manu

Merge ^/head r314178 through r314269.

Use correct macro for Synopsys UART driver declaration.