cam: Remove left-over sys/cdefs.h in sys/cam

These weren't removed when $FreeBSD$ was removed. They aren't needed and
now are a style(9) nonconformity.

Sponsored by: Netflix

sys: Remove $FreeBSD$: one-line .c pattern

Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

Delay GEOM disk_create() until CAM periph probe completes.

Before this patch CAM periph drivers called both disk_alloc() and
disk_create() same time on periph creation. But then prevented disks
fro

Delay GEOM disk_create() until CAM periph probe completes.

Before this patch CAM periph drivers called both disk_alloc() and
disk_create() same time on periph creation. But then prevented disks
from opening until the periph probe completion with cam_periph_hold().
As result, especially if disk misbehaves during the probe, GEOM event
thread, triggered to taste the disk, got blocked on open attempt,
potentially for a long time, unable to process other events.

This patch moves disk_create() call from periph creation to the end of
the probe. To allow disk_create() calls from non-sleepable CAM contexts
some of its duties requiring memory allocations are moved either back
to disk_alloc() or forward to g_disk_create(), so now disk_alloc() and
disk_add_alias() are the only disk methods that require sleeping. If
disk fails during the probe disk_create() may just be skipped, going
directly to disk_destroy(). Other method calls during that time are
just ignored. Since GEOM may now see the disks after CAM bus scan is
already completed, introduce per-periph boot hold functions. Enclosure
driver already had such mechanism, so just generalize it.

Reviewed by: imp
MFC after: 1 month
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D35784

show more ...

ses: minor cleanup

* Prefer variables of small scope rather than large scope
* Remove a magic number
* style(9) for return statements
* Remove the get_enc_status method, which never did anything
* F

ses: minor cleanup

* Prefer variables of small scope rather than large scope
* Remove a magic number
* style(9) for return statements
* Remove the get_enc_status method, which never did anything
* Fix a variable type in the handle_string method
* Proofread some comments

MFC after: 2 weeks
Sponsored by: Spectra Logic, Axcient
Reviewed by: ken, mav
Differential Revision: https://reviews.freebsd.org/D31686

show more ...

cam: Relax callouts precisions.

On large systems even relatively rare callouts may fire many times
per second. This should allow them to aggregate better, since we do
not require any precision when

cam: Relax callouts precisions.

On large systems even relatively rare callouts may fire many times
per second. This should allow them to aggregate better, since we do
not require any precision when polling for media change, etc.

MFC after: 2 weeks

show more ...

cam: Remove all the write-only variables

Delete all the write only variables in CAM. At worst, the only behavior
change would be to prevent core dumps from chasing NULL pointers (though
I think in a

cam: Remove all the write-only variables

Delete all the write only variables in CAM. At worst, the only behavior
change would be to prevent core dumps from chasing NULL pointers (though
I think in all these cases the pointers can't be NULL).

Sponsored by: Netflix

show more ...

cam: clean up empty lines in .c and .h files

Don't try to copyout() to a kernel buffer.

The handle_string callback for the ENCIOC_GET_ENCNAME and
ENCIOC_GETENCID ioctls tries to copy the size of the generated string
out to userland. However,

Don't try to copyout() to a kernel buffer.

The handle_string callback for the ENCIOC_GET_ENCNAME and
ENCIOC_GETENCID ioctls tries to copy the size of the generated string
out to userland. However, the callback only has access to the kernel
copy of the structure populated by copyin(). The copyout() call
simply overwrites the value in the kernel's copy preventing the
subsequent overflow prevention logic from working.

Fix this by instead doing a copyout() of the updated length in the
caller after the callback returns.

Reviewed by: kib
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24456

show more ...

Merge ^/head r358269 through r358399.

Mark more nodes as CTLFLAG_MPSAFE or CTLFLAG_NEEDGIANT (17 of many)

r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly mark

Mark more nodes as CTLFLAG_MPSAFE or CTLFLAG_NEEDGIANT (17 of many)

r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.

This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.

Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT

Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718

show more ...

Make CAM use root_mount_hold_token() to delay boot.

Before this change CAM used config_intrhook_establish() for this purpose,
but that approach does not allow to delay it again after releasing once.

Make CAM use root_mount_hold_token() to delay boot.

Before this change CAM used config_intrhook_establish() for this purpose,
but that approach does not allow to delay it again after releasing once.

USB stack uses root_mount_hold() to delay boot until bus scan is complete.
But once it is, CAM had no time to scan SCSI bus, registered by umass(4),
if it already done other scans and called config_intrhook_disestablish().
The new approach makes it work smooth, assuming the USB device is found
during the initial bus scan. Devices appearing on USB bus later may still
require setting kern.cam.boot_delay, but hopefully those are minority.

MFC after: 2 weeks
Sponsored by: iXsystems, Inc.

show more ...

MFHead @349476

Sponsored by: The FreeBSD Foundation

Improve AHCI Enclosure Management and SES interoperation.

Since SES specs do not define mechanism to map enclosure slots to SATA
disks, AHCI EM code I written many years ago appeared quite useless,

Improve AHCI Enclosure Management and SES interoperation.

Since SES specs do not define mechanism to map enclosure slots to SATA
disks, AHCI EM code I written many years ago appeared quite useless,
that always bugged me. I was thinking whether it was a good idea, but
if LSI HBAs do that, why I shouldn't?

This change introduces simple non-standard mechanism for the mapping
into both AHCI EM and SES code, that makes AHCI EM on capable controllers
(most of Intel's) a first-class SES citizen, allowing it to report disk
physical path to GEOM, show devices inserted into each enclosure slot in
`sesutil map` and `getencstat`, control locate and fault LEDs for specific
devices with `sesutil locate adaX on` and `sesutil fault adaX on`, etc.

I've successfully tested this on Supermicro X10DRH-i motherboard connected
with sideband cable of its S-SATA Mini-SAS connector to SAS815TQ backplane.
It can indicate with LEDs Locate, Fault and Rebuild/Remap SES statuses for
each disk identical to real SES of Supermicro SAS2 backplanes.

MFC after: 2 weeks

show more ...

Decouple enc/ses verbosity from bootverbose.

I don't want to be regularly notified that my enclosure violates standards
until there is some real problem I want to debug.

MFC after: 2 weeks

Remove ancient SCSI-2/3 mentioning.

MFC after: 2 weeks

Move most of the contents of opt_compat.h to opt_global.h.

opt_compat.h is mentioned in nearly 180 files. In-progress network
driver compabibility improvements may add over 100 more so this is
close

Move most of the contents of opt_compat.h to opt_global.h.

opt_compat.h is mentioned in nearly 180 files. In-progress network
driver compabibility improvements may add over 100 more so this is
closer to "just about everywhere" than "only some files" per the
guidance in sys/conf/options.

Keep COMPAT_LINUX32 in opt_compat.h as it is confined to a subset of
sys/compat/linux/*.c. A fake _COMPAT_LINUX option ensure opt_compat.h
is created on all architectures.

Move COMPAT_LINUXKPI to opt_dontuse.h as it is only used to control the
set of compiled files.

Reviewed by: kib, cem, jhb, jtl
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14941

show more ...

Reject ioctls to SCSI enclosures from 32-bit compat processes.

The ioctl objects contain pointers and require translation and some
refactoring of the infrastructure to work. For now prevent opertion

Reject ioctls to SCSI enclosures from 32-bit compat processes.

The ioctl objects contain pointers and require translation and some
refactoring of the infrastructure to work. For now prevent opertion
on garbage values. This is very slightly overbroad in that ENCIOC_INIT
is safe.

Reviewed by: imp, kib
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14671

show more ...

Return a C errno for cam_periph_acquire().

There's no compelling reason to return a cam_status type for this
function and doing so only creates confusion with normal C
coding practices. It's technic

Return a C errno for cam_periph_acquire().

There's no compelling reason to return a cam_status type for this
function and doing so only creates confusion with normal C
coding practices. It's technically an API change, but the periph API
isn't widely used. No efffective change to operation.

Reviewed by: imp, mav, ken
Sponsored by: Netflix
Differential Revision: D14063

show more ...

Remove unused 4th argument to match the standard error routines.

Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D13386

sys/cam: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error

sys/cam: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

show more ...

MFhead@r320180

Merge ^/head r319973 through 321382.

Merge ^/head r320573 through r320970.

Include opt files in the kernel with "" instead of <>.