1 /*This file is automatically generated from msg.source.*/ 2 char *e_adm__msgs[] = { 3 "You have specified a remote printer\nand supplied one or more of the following\noptions: A,a,e,F,H,h,i,l,m,M,o,U,v,Q,W.", 4 "", 5 "The names \"any\" and \"all\" are reserved.", 6 "You must use a system name that has\nbeen defined with the lpsystem command.", 7 "Other options given with -d option.", 8 "Give only the -d option to define\na default destination.", 9 "Other options given with -x option.", 10 "Give only the -x option to delete a\nprinter.", 11 "Confusing options given.", 12 "You are either missing the -p option or\nhave given extraneous options while\ntrying to define alerting for a\nprint wheel.", 13 "Wrong combination of options.", 14 "The -j option should not be given when\nadding a new printer.", 15 "Nothing to mount.", 16 "Give the -f or -S option to identify\nform or print wheel to mount.", 17 "Illegal use of the -Q option.", 18 "Don't give the -Q option when setting\na printer fault alert.", 19 "Destination \"%s\" doesn't exist.", 20 "Check the name again. Use the lpstat -p\nor lpstat -c command to see if the\nprinter or class exists.", 21 "Nothing to do.", 22 "You must give one of these options:\n-p, -d, -x, -S.", 23 "No -u option given.", 24 "Give the -C option only with the\n-u option.", 25 "No -F option given.", 26 "Give the -j option only with the\n-F option.", 27 "Multiple -o %s options given.", 28 "The last one will be used;\nprocessing continues.", 29 "Missing right %c quote in stty= argument.", 30 "", 31 "Printer type \"%s\" is not in the\nTerminfo database.", 32 "Check the name again; if it is correct\nyou have to make an entry for it in the\nTerminfo database.", 33 "Inconsistent printer types.", 34 "The printer types do not agree on\nwhether the printer takes print wheels\nor not. Check the printer types or the\nTerminfo database.", 35 "\"unknown\" not allowed with multiple printer types.", 36 "Your list of printer types includes the\ntype \"unknown\"; either remove that type\nfrom the list or give just the type\n\"unknown\".", 37 "\"%s\" setting impossible.", 38 "", 39 "The printer can't handle all the above setting(s).", 40 "Check the manual for the printer to make\nsure each value is correct; check that\nthe Terminfo entry/entries are correct.", 41 "Settings won't work on these printer types:\n %s", 42 "The incompatible settings won't be\napplied when these types are used to\nprint a request. Change the settings or\nlist of types, if you want.", 43 "Can't create the printer \"%s\".", 44 "This is an existing class name;\nchoose another name.", 45 "Missing -U or -v option.", 46 "Local printers must have\na port defined (-v option) or\nhave dial-out instructions (-U option).", 47 "Both -U and -v given.", 48 "Give only one of these options, the\n-v option to name the direct connect\nport or the -U to identify the dial-out\nmethod.", 49 "The printer \"%s\" is not a member of\nthe class \"%s\".", 50 "Use the lpstat -c command to find the\ncorrect class.", 51 "No printer type (-T option) given.", 52 "The printer type must be known:\n* to set default cpi, lpi, length, width\n* to define character sets, print wheels\n* to allow forms.", 53 "The options -e, -i and -m are mutually exclusive.", 54 "Give just one of these options to define\nan interface program.", 55 "The printer \"%s\" does not exist.", 56 "You must give the name of an existing\nprinter in the -e option.", 57 "The -p and -e options have the same value.", 58 "You must name a different printer\nin the -e option.", 59 "The -c and -r options have the same value.", 60 "Don't try to remove the printer from the\nsame class to which you are adding it.", 61 "The model \"%s\" does not exist.", 62 "Use the command\n ls /usr/lib/lp/model\nto find the list of known models.", 63 "The options \"-%c\" and \"-%c\" are contradictory.", 64 "Give the -l option if the printer is\nalso a login terminal, give the\n-h option if it is not.", 65 "\"%s\" is a directory.", 66 "If this is not what you intended, enter\nthe command again with the correct name.", 67 "\"%s\" is a block device.", 68 "If this is not what you intended, enter\nthe command again with the correct name.", 69 "\"%s\" is a symlink that points to a file with a different owner.", 70 "Retry this operation with a new device.", 71 "\"%s\" is a symlink owned by an unprivileged user.\nThis introduces a potential security hole in your configuration.", 72 "If this is not what you intended, enter\nthe command again with the correct name.", 73 "\"%s\" is accessible by others.", 74 "If other users can access it you may get\nunwanted output. If this is not what you\nwant change the owner to \"lp\" and change\nthe mode to 0600.\nProcessing continues.", 75 "\"%s\" doesn't exist.", 76 "Create the file, special device, or FIFO\nfor the -v option before running this\ncommand.", 77 "The printer \"%s\" is already a member\nof the class \"%s\".", 78 "If you made a mistake, rerun the command\nwith the correct names;\nprocessing continues.", 79 "Error reading all classes from disk\n(%s).", 80 "", 81 "Error reading all printers from disk\n(%s).", 82 "", 83 "Invalid argument to the -f option.", 84 "The argument must begin with either\n\"allow:\" or \"deny:\" and be followed with\na list of form names. On the other hand,\nperhaps you forgot the -M option?", 85 "Form \"%s\" is not listed as available\nfor the printer \"%s\".", 86 "Check the name; if wrong enter the\ncommand again.\nProcessing continues.", 87 "-S must not give a character set map.", 88 "The printer takes only print wheels.\nFix the type or change the value in the\n-S option.", 89 "-S must give a character set map.", 90 "The printer has only selectable\ncharacter sets. Fix the type or change\nthe value in the -S option.", 91 "Illegal character set \"%s\".", 92 "", 93 "Character set \"%s\" won't work with\nthese printer types:\n %s", 94 "", 95 "The printer's type(s) don't have the\nabove character sets defined.", 96 "Check the manual for the printer to make\nsure each name is correct; check that\nthe Terminfo entry/entries are correct.", 97 "The printer doesn't take print wheels.", 98 "Check that you named the right printer.\nCheck that the Terminfo database is\ncorrect; if wrong, fix it and add the\nprint wheel list for the printer.", 99 "Print wheel \"%s\" is not listed as\navailable for the printer \"%s\".", 100 "Check the name; if wrong enter the\ncommand again with the correct name.\nProcessing continues.", 101 "The printer is busy; can't mount/unmount now.", 102 "Wait until the current job(s) are\nfinished, or disable the printer.", 103 "Can't mount/unmount the form or print wheel.", 104 "Check the name. The one you gave isn't\nrecognized.", 105 "Strange, the LP print service took the request to\ndelete printer or class \"%s\" but the disk copy\ncan't be deleted.\n(%s)", 106 "", 107 "There are jobs currently queued for destination\n\"%s\"", 108 "Use the /usr/sbin/lpmove command to\nassign them to another destination,\nor wait for them to finish printing.", 109 "Error writing default destination\n(%s).", 110 "", 111 "Error writing print wheel information for \"%s\"\n(%s).", 112 "", 113 "Illegal value for the -F option", 114 "You must give one of the values\n\"continue\", \"wait\", or \"beginning\".", 115 "Illegal value for the -F option", 116 "You must give one of the values\n\"wait\" or \"beginning\".\n(\"continue\" is not allowed if you also\ngive the -j option.)", 117 "\"%s\" is an illegal value for the\n-o option", 118 "You must give one of the values\nbanner, nobanner,\ncpi=X, lpi=X, width=X, length=X,\nstty=... (if ... is a list, surround IT\nwith single quotes (') and put the whole\nthing in double quotes (\")),\nor filebreak or nofilebreak (with -a).", 119 "The form \"%s\" requires capabilities\nnot provided by the printer.", 120 "", 121 "Can't allow one or more forms.", 122 "You have to adjust each form definition,\nif possible. Leave each form out of the\nallow list to continue defining the\nprinter.", 123 "Can't access the file \"%s\"\nto copy the interface program.", 124 "Make sure the name is correct;\nmake sure the file exists.", 125 "Can't create class \"%s\".", 126 "This is an existing printer name;\nchoose another name.", 127 "Illegal -A option for printer/print wheel\n\"%s\".", 128 "You can't give the -A quiet or the\n-A list option for a printer or print\nwheel that doesn't exist yet.", 129 "Nothing to do.", 130 "The -p option identifies a printer; give\nother options to do something with it.", 131 "Nothing to do.", 132 "The -S option identifies a print wheel;\ngive a -A, -W, and/or -Q option to set\nor change the alerting for it.", 133 "Missing the -M or -f option", 134 "The -a option asks for an alignment\npattern, but you need to tell what form\nto mount.", 135 "No alignment pattern has been registered with\nthe form \"%s\".", 136 "The form will be mounted anyway. If you\nneed to check the alignment of the form,\nregister an alignment pattern using the\nlpforms command, unmount the form, then\nissue this command again.", 137 "Illegal combination of options.", 138 "Don't give the \"-A list\" option with the\n-W or -Q options.", 139 "The LP print service can't take another printer.", 140 "The printer configuration has been saved\non disk nonetheless. Stop the LP print\nservice (/usr/sbin/lpshut) and restart it\n(/usr/lib/lp/lpsched) to have it recognize\nthe new printer.", 141 "The LP print service can't take another class.", 142 "The class configuration has been saved\non disk nonetheless. Stop the LP print\nservice (/usr/sbin/lpshut) and restart it\n(/usr/lib/lp/lpsched) to have it\nrecognize the new class.", 143 "The LP print service can't take in another print\nwheel alert.", 144 "The alert configuration has been saved\non disk nonetheless. Stop the LP print\nservice (/usr/sbin/lpshut) and restart it\n(/usr/lib/lp/lpsched) to have it\nrecognize the new print wheel alert.", 145 "Shouldn't mount the form.", 146 "You may want to adjust the form\ndefinition, if possible. Check that the\nTerminfo database gives correct\nattributes for the printer type.\nThe form is considered mounted anyway.", 147 "The form \"%s\" won't work with these\nprinter types:\n %s", 148 "", 149 "Can't create both class and printer \"%s\".", 150 "Make the two names different.", 151 "Error reading system information for \"%s\"\n(%s).", 152 "", 153 "System \"%s\" does not exist.", 154 "Use the \"lpsystem -l\" command to list\nall known systems.", 155 "You may not specify a remote printer\nname with a local system name.", 156 "Either specify a remote system name\nor omit the remote printer name.", 157 "The names \"any\", \"all\" and \"none\" are reserved.", 158 "Use a different name when adding a\nprinter. The name \"all\" can be used with\nthe -A, -x, -r, or -c options.", 159 "Can't open FIFO to print alignment pattern.\n(%s)", 160 "", 161 "No filter to convert the alignment pattern.", 162 "The printer can't print the alignment\npattern directly, and there's no filter\nthat will convert it. Check the form\ndefinition. Check the printer type.", 163 "There may be extra lines in the alignment pattern.", 164 "If the printed alignment pattern is too\nlong, either add a filter that can print\na subset of pages or redefine the form\nwith a manually truncated pattern.\nProcessing continues.", 165 "Ignoring the -o filebreak option.", 166 "This is only used with the -a option\nwhen mounting a form, to insert a page\nbreak between alignment patterns.\nPerhaps you left out the -a option?", 167 "Ignoring the -a option.", 168 "This is only used when MOUNTING a form,\nto print a pattern to help you align it.\nUnmounting a form means you're replacing\nit with blank paper, which needs no\nalignment.", 169 "The LP print service could not read the disk file\ncontaining this configuration information.", 170 "This is probably due to a full spooling\nfile system. If it is, clean out files\nto free up space, then resubmit this\ncommand.", 171 "The form requires the character set\n\"%s\".", 172 "Check the form name and form definition.\nSince a particular character set is\nmandatory with this form but the printer\ncan't select that character set, you\ncan't mount the form on this printer.", 173 "The form requires the print wheel\n\"%s\".", 174 "This print wheel has been listed as\nmandatory for the form, but it is not\ncurrently mounted. If you don't want the\ncurrent print wheel used, enter the\ncommand again, and identify the print\nwheel to be mounted.", 175 "The form requires the print wheel\n\"%s\".", 176 "This print wheel has been listed as\nmandatory for the form. If you made a\nmistake, enter the command again and\nchange the print wheel to be mounted.", 177 "Only one print wheel at a time, please.", 178 "You can only give a single print wheel\nname, not a list of names, when defining\na print wheel alert. Only the first\nprint wheel will be defined. (Maybe you\nleft out the -p option?)", 179 "Only one print wheel at a time, please.", 180 "You can only give a single print wheel\nname, not a list of names, when mounting\na print wheel. Only the first one will\nbe mounted.", 181 "Input types not allowed with multiple printer\ntypes.", 182 "The LP print service currently doesn't\nallow input types other than \"simple\"\nwhen more than one printer type is\ngiven. You have to change the printer\ntypes or input types.", 183 "Certain options ignored for remote printer\n %s.", 184 "When you try to change the configuration\nof all printers at once some options are\nignored for remote printers.", 185 "There are no alerts defined for the print wheel\n\"%s\".", 186 "Check the name again.", 187 "The printer does not have the tray number you specified.", 188 "Try using the -t option with -M to set the total number of trays.", 189 "The number of trays specified with the -t option must between 1 and 100.", 190 "", 191 "`%s' cannot be used as a paper name because it\nis already defined as an old style form.", 192 "Either use another name, or remove the conflicting form using `lpforms'.", 193 "The ppd \"%s\" does not exist.", 194 "Use the command\n find <PPD file repository> -type f\n", 195 "where <PPD file repository> is one or more of the following:\n", 196 " /usr/share/ppd/*/*/\n /usr/share/local/ppd/*/*/\n", 197 " /opt/share/ppd/*/*/\n /var/lp/ppd/*/*/\n", 198 "to find the list of known printer ppd definitions.", 199 }; 200