man/man1m/arp.1m

     te
 Copyright (c) 2009 Sun Microsystems, Inc. All Rights Reserved.
 Copyright 1989 AT&T
 The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License.
 You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License.
 When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
 ARP 1M "Sep 02, 2015"
 NAME
arp - address resolution display and control
 SYNOPSIS

arp hostname


arp -a [-n]


arp -d hostname


arp -f filename


arp -s hostname ether_address [temp] [pub] [trail]
 [permanent]


 DESCRIPTION

The arp program displays and modifies the Internet-to-MAC address
translation tables used by the address resolution protocol (see arp(7P)).

With no flags, the program displays the current ARP entry for
hostname. The host may be specified by name or by number, using Internet
dot notation.

Options that modify the ARP translation tables (-d, -f, and
-s) can be used only when the invoked command is granted the
PRIV_SYS_NET_CONFIG privilege. See privileges(5).
 OPTIONS
-a

Display all of the current ARP entries. The definition for the flags in
the table are:
d

Unverified; this is a local IP address that is currently undergoing Duplicate
Address Detection. ARP will not respond to requests for this address until
Duplicate Address Detection completes.


o

Old; this entry is aging away. If IP requests it again, a new ARP query will be
generated. This state is used for detecting peer address changes.


y

Delayed; periodic address defense and conflict detection was unable to send a
packet due to internal network use limits for non-traffic-related messages (100
packets per hour per interface). This occurs only on interfaces with very large
numbers of aliases.


A

Authority; this machine is authoritative for this IP address. ARP will not
accept updates from other machines for this entry.


L

Local; this is a local IP address configured on one of the machine's logical
interfaces. ARP will defend this address if another node attempts to claim it.


M

Mapping; only used for the multicast entry for 224.0.0.0


P

Publish; includes IP address for the machine and the addresses that have
explicitly been added by the -s option. ARP will respond to ARP requests
for this address.


S

Static; entry cannot be changed by learned information. This indicates that the
permanent flag was used when creating the entry.


U

Unresolved; waiting for ARP response.


You can use the -n option with the -a option to disable the
automatic numeric IP address-to-name translation. Use arp -an or
arp -na to display numeric IP addresses. The arp -a
option is equivalent to:
# netstat -p -f inet


...and -an and -na are equivalent to:
# netstat -pn -f inet


-d

Delete an entry for the host called hostname.
Note that ARP entries for IPMP (IP Network Multipathing) data and test
addresses are managed by the kernel and thus cannot be deleted.


-f

Read the file named filename and set multiple entries in the ARP
tables. Entries in the file should be of the form:
hostname MACaddress [temp] [pub] [trail] [permanent]


See the -s option for argument definitions.


-s

Create an ARP entry for the host called hostname with the MAC
address MACaddress. For example, an Ethernet address is given as six
hexadecimal bytes separated by colons. The entry will not be subject to
deletion by aging unless the word temp is specified in the command. If
the word pub is specified, the entry will be published, which means that
this system will respond to ARP requests for hostname even though the
hostname is not its own. The word permanent indicates that the
system will not accept MAC address changes for hostname from the network.
Solaris does not implement trailer encapsulation, and the word trail is
accepted on entries for compatibility only.
arp -s can be used for a limited form of proxy ARP when a host on
one of the directly attached networks is not physically present on a subnet.
Another machine can then be configured to respond to ARP requests using
arp -s. This is useful in certain SLIP configurations.
Non-temporary proxy ARP entries for an IPMP (IP Network Multipathing) group are
automatically managed by the kernel. Specifically, if the hardware address in
an entry matches the hardware address of an IP interface in an IPMP group, and
the IP address is not local to the system, this will be regarded as an IPMP
proxy ARP entry. This entry will have its hardware address automatically
adjusted in order to keep the IP address reachable so long as the IPMP group
has not entirely failed.
ARP entries must be consistent across an IPMP group. Therefore, ARP entries
cannot be associated with individual underlying IP interfaces in an IPMP group,
and must instead be associated with the corresponding IPMP IP interface.
Note that ARP entries for IPMP data and test addresses are managed by the
kernel and thus cannot be changed.


 SEE ALSO

ifconfig(1M), netstat(1M), ndp(1M), attributes(5),
privileges(5), arp(7P)