xref: /linux/tools/testing/selftests/syscall_user_dispatch/sud_benchmark.c (revision c532de5a67a70f8533d495f8f2aaa9a0491c3ad0)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright (c) 2020 Collabora Ltd.
4  *
5  * Benchmark and test syscall user dispatch
6  */
7 
8 #define _GNU_SOURCE
9 #include <stdio.h>
10 #include <string.h>
11 #include <stdlib.h>
12 #include <signal.h>
13 #include <errno.h>
14 #include <time.h>
15 #include <sys/time.h>
16 #include <unistd.h>
17 #include <sys/sysinfo.h>
18 #include <sys/prctl.h>
19 #include <sys/syscall.h>
20 
21 #ifndef PR_SET_SYSCALL_USER_DISPATCH
22 # define PR_SET_SYSCALL_USER_DISPATCH	59
23 # define PR_SYS_DISPATCH_OFF	0
24 # define PR_SYS_DISPATCH_ON	1
25 # define SYSCALL_DISPATCH_FILTER_ALLOW	0
26 # define SYSCALL_DISPATCH_FILTER_BLOCK	1
27 #endif
28 
29 #ifdef __NR_syscalls
30 # define MAGIC_SYSCALL_1 (__NR_syscalls + 1) /* Bad Linux syscall number */
31 #else
32 # define MAGIC_SYSCALL_1 (0xff00)  /* Bad Linux syscall number */
33 #endif
34 
35 /*
36  * To test returning from a sigsys with selector blocked, the test
37  * requires some per-architecture support (i.e. knowledge about the
38  * signal trampoline address).  On i386, we know it is on the vdso, and
39  * a small trampoline is open-coded for x86_64.  Other architectures
40  * that have a trampoline in the vdso will support TEST_BLOCKED_RETURN
41  * out of the box, but don't enable them until they support syscall user
42  * dispatch.
43  */
44 #if defined(__x86_64__) || defined(__i386__)
45 #define TEST_BLOCKED_RETURN
46 #endif
47 
48 #ifdef __x86_64__
49 void* (syscall_dispatcher_start)(void);
50 void* (syscall_dispatcher_end)(void);
51 #else
52 unsigned long syscall_dispatcher_start = 0;
53 unsigned long syscall_dispatcher_end = 0;
54 #endif
55 
56 unsigned long trapped_call_count = 0;
57 unsigned long native_call_count = 0;
58 
59 char selector;
60 #define SYSCALL_BLOCK   (selector = SYSCALL_DISPATCH_FILTER_BLOCK)
61 #define SYSCALL_UNBLOCK (selector = SYSCALL_DISPATCH_FILTER_ALLOW)
62 
63 #define CALIBRATION_STEP 100000
64 #define CALIBRATE_TO_SECS 5
65 int factor;
66 
67 static double one_sysinfo_step(void)
68 {
69 	struct timespec t1, t2;
70 	int i;
71 	struct sysinfo info;
72 
73 	clock_gettime(CLOCK_MONOTONIC, &t1);
74 	for (i = 0; i < CALIBRATION_STEP; i++)
75 		sysinfo(&info);
76 	clock_gettime(CLOCK_MONOTONIC, &t2);
77 	return (t2.tv_sec - t1.tv_sec) + 1.0e-9 * (t2.tv_nsec - t1.tv_nsec);
78 }
79 
80 static void calibrate_set(void)
81 {
82 	double elapsed = 0;
83 
84 	printf("Calibrating test set to last ~%d seconds...\n", CALIBRATE_TO_SECS);
85 
86 	while (elapsed < 1) {
87 		elapsed += one_sysinfo_step();
88 		factor += CALIBRATE_TO_SECS;
89 	}
90 
91 	printf("test iterations = %d\n", CALIBRATION_STEP * factor);
92 }
93 
94 static double perf_syscall(void)
95 {
96 	unsigned int i;
97 	double partial = 0;
98 
99 	for (i = 0; i < factor; ++i)
100 		partial += one_sysinfo_step()/(CALIBRATION_STEP*factor);
101 	return partial;
102 }
103 
104 static void handle_sigsys(int sig, siginfo_t *info, void *ucontext)
105 {
106 	char buf[1024];
107 	int len;
108 
109 	SYSCALL_UNBLOCK;
110 
111 	/* printf and friends are not signal-safe. */
112 	len = snprintf(buf, 1024, "Caught sys_%x\n", info->si_syscall);
113 	write(1, buf, len);
114 
115 	if (info->si_syscall == MAGIC_SYSCALL_1)
116 		trapped_call_count++;
117 	else
118 		native_call_count++;
119 
120 #ifdef TEST_BLOCKED_RETURN
121 	SYSCALL_BLOCK;
122 #endif
123 
124 #ifdef __x86_64__
125 	__asm__ volatile("movq $0xf, %rax");
126 	__asm__ volatile("leaveq");
127 	__asm__ volatile("add $0x8, %rsp");
128 	__asm__ volatile("syscall_dispatcher_start:");
129 	__asm__ volatile("syscall");
130 	__asm__ volatile("nop"); /* Landing pad within dispatcher area */
131 	__asm__ volatile("syscall_dispatcher_end:");
132 #endif
133 
134 }
135 
136 int main(void)
137 {
138 	struct sigaction act;
139 	double time1, time2;
140 	int ret;
141 	sigset_t mask;
142 
143 	memset(&act, 0, sizeof(act));
144 	sigemptyset(&mask);
145 
146 	act.sa_sigaction = handle_sigsys;
147 	act.sa_flags = SA_SIGINFO;
148 	act.sa_mask = mask;
149 
150 	calibrate_set();
151 
152 	time1 = perf_syscall();
153 	printf("Avg syscall time %.0lfns.\n", time1 * 1.0e9);
154 
155 	ret = sigaction(SIGSYS, &act, NULL);
156 	if (ret) {
157 		perror("Error sigaction:");
158 		exit(-1);
159 	}
160 
161 	fprintf(stderr, "Enabling syscall trapping.\n");
162 
163 	if (prctl(PR_SET_SYSCALL_USER_DISPATCH, PR_SYS_DISPATCH_ON,
164 		  syscall_dispatcher_start,
165 		  (syscall_dispatcher_end - syscall_dispatcher_start + 1),
166 		  &selector)) {
167 		perror("prctl failed\n");
168 		exit(-1);
169 	}
170 
171 	SYSCALL_BLOCK;
172 	syscall(MAGIC_SYSCALL_1);
173 
174 #ifdef TEST_BLOCKED_RETURN
175 	if (selector == SYSCALL_DISPATCH_FILTER_ALLOW) {
176 		fprintf(stderr, "Failed to return with selector blocked.\n");
177 		exit(-1);
178 	}
179 #endif
180 
181 	SYSCALL_UNBLOCK;
182 
183 	if (!trapped_call_count) {
184 		fprintf(stderr, "syscall trapping does not work.\n");
185 		exit(-1);
186 	}
187 
188 	time2 = perf_syscall();
189 
190 	if (native_call_count) {
191 		perror("syscall trapping intercepted more syscalls than expected\n");
192 		exit(-1);
193 	}
194 
195 	printf("trapped_call_count %lu, native_call_count %lu.\n",
196 	       trapped_call_count, native_call_count);
197 	printf("Avg syscall time %.0lfns.\n", time2 * 1.0e9);
198 	printf("Interception overhead: %.1lf%% (+%.0lfns).\n",
199 	       100.0 * (time2 / time1 - 1.0), 1.0e9 * (time2 - time1));
200 	return 0;
201 
202 }
203