1 /* SPDX-License-Identifier: LGPL-2.1 OR MIT */ 2 /* 3 * Author: Paul Burton <paul.burton@mips.com> 4 * (C) Copyright 2018 MIPS Tech LLC 5 * (C) Copyright 2016-2022 - Mathieu Desnoyers <mathieu.desnoyers@efficios.com> 6 */ 7 8 /* 9 * RSEQ_SIG uses the break instruction. The instruction pattern is: 10 * 11 * On MIPS: 12 * 0350000d break 0x350 13 * 14 * On nanoMIPS: 15 * 00100350 break 0x350 16 * 17 * On microMIPS: 18 * 0000d407 break 0x350 19 * 20 * For nanoMIPS32 and microMIPS, the instruction stream is encoded as 16-bit 21 * halfwords, so the signature halfwords need to be swapped accordingly for 22 * little-endian. 23 */ 24 #if defined(__nanomips__) 25 # ifdef __MIPSEL__ 26 # define RSEQ_SIG 0x03500010 27 # else 28 # define RSEQ_SIG 0x00100350 29 # endif 30 #elif defined(__mips_micromips) 31 # ifdef __MIPSEL__ 32 # define RSEQ_SIG 0xd4070000 33 # else 34 # define RSEQ_SIG 0x0000d407 35 # endif 36 #elif defined(__mips__) 37 # define RSEQ_SIG 0x0350000d 38 #else 39 /* Unknown MIPS architecture. */ 40 #endif 41 42 #define rseq_smp_mb() __asm__ __volatile__ ("sync" ::: "memory") 43 #define rseq_smp_rmb() rseq_smp_mb() 44 #define rseq_smp_wmb() rseq_smp_mb() 45 46 #define rseq_smp_load_acquire(p) \ 47 __extension__ ({ \ 48 __typeof(*p) ____p1 = RSEQ_READ_ONCE(*p); \ 49 rseq_smp_mb(); \ 50 ____p1; \ 51 }) 52 53 #define rseq_smp_acquire__after_ctrl_dep() rseq_smp_rmb() 54 55 #define rseq_smp_store_release(p, v) \ 56 do { \ 57 rseq_smp_mb(); \ 58 RSEQ_WRITE_ONCE(*p, v); \ 59 } while (0) 60 61 #if _MIPS_SZLONG == 64 62 # define LONG ".dword" 63 # define LONG_LA "dla" 64 # define LONG_L "ld" 65 # define LONG_S "sd" 66 # define LONG_ADDI "daddiu" 67 # define U32_U64_PAD(x) x 68 #elif _MIPS_SZLONG == 32 69 # define LONG ".word" 70 # define LONG_LA "la" 71 # define LONG_L "lw" 72 # define LONG_S "sw" 73 # define LONG_ADDI "addiu" 74 # ifdef __BIG_ENDIAN 75 # define U32_U64_PAD(x) "0x0, " x 76 # else 77 # define U32_U64_PAD(x) x ", 0x0" 78 # endif 79 #else 80 # error unsupported _MIPS_SZLONG 81 #endif 82 83 #define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, start_ip, \ 84 post_commit_offset, abort_ip) \ 85 ".pushsection __rseq_cs, \"aw\"\n\t" \ 86 ".balign 32\n\t" \ 87 __rseq_str(label) ":\n\t" \ 88 ".word " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \ 89 LONG " " U32_U64_PAD(__rseq_str(start_ip)) "\n\t" \ 90 LONG " " U32_U64_PAD(__rseq_str(post_commit_offset)) "\n\t" \ 91 LONG " " U32_U64_PAD(__rseq_str(abort_ip)) "\n\t" \ 92 ".popsection\n\t" \ 93 ".pushsection __rseq_cs_ptr_array, \"aw\"\n\t" \ 94 LONG " " U32_U64_PAD(__rseq_str(label) "b") "\n\t" \ 95 ".popsection\n\t" 96 97 #define RSEQ_ASM_DEFINE_TABLE(label, start_ip, post_commit_ip, abort_ip) \ 98 __RSEQ_ASM_DEFINE_TABLE(label, 0x0, 0x0, start_ip, \ 99 (post_commit_ip - start_ip), abort_ip) 100 101 /* 102 * Exit points of a rseq critical section consist of all instructions outside 103 * of the critical section where a critical section can either branch to or 104 * reach through the normal course of its execution. The abort IP and the 105 * post-commit IP are already part of the __rseq_cs section and should not be 106 * explicitly defined as additional exit points. Knowing all exit points is 107 * useful to assist debuggers stepping over the critical section. 108 */ 109 #define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \ 110 ".pushsection __rseq_exit_point_array, \"aw\"\n\t" \ 111 LONG " " U32_U64_PAD(__rseq_str(start_ip)) "\n\t" \ 112 LONG " " U32_U64_PAD(__rseq_str(exit_ip)) "\n\t" \ 113 ".popsection\n\t" 114 115 #define RSEQ_ASM_STORE_RSEQ_CS(label, cs_label, rseq_cs) \ 116 RSEQ_INJECT_ASM(1) \ 117 LONG_LA " $4, " __rseq_str(cs_label) "\n\t" \ 118 LONG_S " $4, %[" __rseq_str(rseq_cs) "]\n\t" \ 119 __rseq_str(label) ":\n\t" 120 121 #define RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, label) \ 122 RSEQ_INJECT_ASM(2) \ 123 "lw $4, %[" __rseq_str(current_cpu_id) "]\n\t" \ 124 "bne $4, %[" __rseq_str(cpu_id) "], " __rseq_str(label) "\n\t" 125 126 #define __RSEQ_ASM_DEFINE_ABORT(table_label, label, teardown, \ 127 abort_label, version, flags, \ 128 start_ip, post_commit_offset, abort_ip) \ 129 ".balign 32\n\t" \ 130 __rseq_str(table_label) ":\n\t" \ 131 ".word " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \ 132 LONG " " U32_U64_PAD(__rseq_str(start_ip)) "\n\t" \ 133 LONG " " U32_U64_PAD(__rseq_str(post_commit_offset)) "\n\t" \ 134 LONG " " U32_U64_PAD(__rseq_str(abort_ip)) "\n\t" \ 135 ".word " __rseq_str(RSEQ_SIG) "\n\t" \ 136 __rseq_str(label) ":\n\t" \ 137 teardown \ 138 "b %l[" __rseq_str(abort_label) "]\n\t" 139 140 #define RSEQ_ASM_DEFINE_ABORT(table_label, label, teardown, abort_label, \ 141 start_ip, post_commit_ip, abort_ip) \ 142 __RSEQ_ASM_DEFINE_ABORT(table_label, label, teardown, \ 143 abort_label, 0x0, 0x0, start_ip, \ 144 (post_commit_ip - start_ip), abort_ip) 145 146 #define RSEQ_ASM_DEFINE_CMPFAIL(label, teardown, cmpfail_label) \ 147 __rseq_str(label) ":\n\t" \ 148 teardown \ 149 "b %l[" __rseq_str(cmpfail_label) "]\n\t" 150 151 /* Per-cpu-id indexing. */ 152 153 #define RSEQ_TEMPLATE_CPU_ID 154 #define RSEQ_TEMPLATE_MO_RELAXED 155 #include "rseq-mips-bits.h" 156 #undef RSEQ_TEMPLATE_MO_RELAXED 157 158 #define RSEQ_TEMPLATE_MO_RELEASE 159 #include "rseq-mips-bits.h" 160 #undef RSEQ_TEMPLATE_MO_RELEASE 161 #undef RSEQ_TEMPLATE_CPU_ID 162 163 /* Per-mm-cid indexing. */ 164 165 #define RSEQ_TEMPLATE_MM_CID 166 #define RSEQ_TEMPLATE_MO_RELAXED 167 #include "rseq-mips-bits.h" 168 #undef RSEQ_TEMPLATE_MO_RELAXED 169 170 #define RSEQ_TEMPLATE_MO_RELEASE 171 #include "rseq-mips-bits.h" 172 #undef RSEQ_TEMPLATE_MO_RELEASE 173 #undef RSEQ_TEMPLATE_MM_CID 174 175 /* APIs which are not based on cpu ids. */ 176 177 #define RSEQ_TEMPLATE_CPU_ID_NONE 178 #define RSEQ_TEMPLATE_MO_RELAXED 179 #include "rseq-mips-bits.h" 180 #undef RSEQ_TEMPLATE_MO_RELAXED 181 #undef RSEQ_TEMPLATE_CPU_ID_NONE 182