xref: /linux/tools/testing/selftests/nolibc/Makefile (revision 2a6b6c9a226279b4f6668450ddb21ae655558087) 
1# SPDX-License-Identifier: GPL-2.0
2# Makefile for nolibc tests
3include ../../../scripts/Makefile.include
4include ../../../scripts/utilities.mak
5# We need this for the "cc-option" macro.
6include ../../../build/Build.include
7
8ifneq ($(O),)
9ifneq ($(call is-absolute,$(O)),y)
10$(error Only absolute O= parameters are supported)
11endif
12endif
13
14# we're in ".../tools/testing/selftests/nolibc"
15ifeq ($(srctree),)
16srctree := $(patsubst %/tools/testing/selftests/,%,$(dir $(CURDIR)))
17endif
18
19ifeq ($(ARCH),)
20include $(srctree)/scripts/subarch.include
21ARCH = $(SUBARCH)
22endif
23
24objtree ?= $(srctree)
25
26# XARCH extends the kernel's ARCH with a few variants of the same
27# architecture that only differ by the configuration, the toolchain
28# and the Qemu program used. It is copied as-is into ARCH except for
29# a few specific values which are mapped like this:
30#
31#  XARCH        | ARCH      | config
32#  -------------|-----------|-------------------------
33#  ppc          | powerpc   | 32 bits
34#  ppc64        | powerpc   | 64 bits big endian
35#  ppc64le      | powerpc   | 64 bits little endian
36#
37# It is recommended to only use XARCH, though it does not harm if
38# ARCH is already set. For simplicity, ARCH is sufficient for all
39# architectures where both are equal.
40
41# configure default variants for target kernel supported architectures
42XARCH_powerpc    = ppc
43XARCH_mips       = mips32le
44XARCH            = $(or $(XARCH_$(ARCH)),$(ARCH))
45
46# map from user input variants to their kernel supported architectures
47ARCH_ppc         = powerpc
48ARCH_ppc64       = powerpc
49ARCH_ppc64le     = powerpc
50ARCH_mips32le    = mips
51ARCH_mips32be    = mips
52ARCH            := $(or $(ARCH_$(XARCH)),$(XARCH))
53
54# kernel image names by architecture
55IMAGE_i386       = arch/x86/boot/bzImage
56IMAGE_x86_64     = arch/x86/boot/bzImage
57IMAGE_x86        = arch/x86/boot/bzImage
58IMAGE_arm64      = arch/arm64/boot/Image
59IMAGE_arm        = arch/arm/boot/zImage
60IMAGE_mips32le   = vmlinuz
61IMAGE_mips32be   = vmlinuz
62IMAGE_ppc        = vmlinux
63IMAGE_ppc64      = vmlinux
64IMAGE_ppc64le    = arch/powerpc/boot/zImage
65IMAGE_riscv      = arch/riscv/boot/Image
66IMAGE_s390       = arch/s390/boot/bzImage
67IMAGE_loongarch  = arch/loongarch/boot/vmlinuz.efi
68IMAGE            = $(objtree)/$(IMAGE_$(XARCH))
69IMAGE_NAME       = $(notdir $(IMAGE))
70
71# default kernel configurations that appear to be usable
72DEFCONFIG_i386       = defconfig
73DEFCONFIG_x86_64     = defconfig
74DEFCONFIG_x86        = defconfig
75DEFCONFIG_arm64      = defconfig
76DEFCONFIG_arm        = multi_v7_defconfig
77DEFCONFIG_mips32le   = malta_defconfig
78DEFCONFIG_mips32be   = malta_defconfig
79DEFCONFIG_ppc        = pmac32_defconfig
80DEFCONFIG_ppc64      = powernv_be_defconfig
81DEFCONFIG_ppc64le    = powernv_defconfig
82DEFCONFIG_riscv      = defconfig
83DEFCONFIG_s390       = defconfig
84DEFCONFIG_loongarch  = defconfig
85DEFCONFIG            = $(DEFCONFIG_$(XARCH))
86
87EXTRACONFIG_mips32be = -d CONFIG_CPU_LITTLE_ENDIAN -e CONFIG_CPU_BIG_ENDIAN
88EXTRACONFIG           = $(EXTRACONFIG_$(XARCH))
89
90# optional tests to run (default = all)
91TEST =
92
93# QEMU_ARCH: arch names used by qemu
94QEMU_ARCH_i386       = i386
95QEMU_ARCH_x86_64     = x86_64
96QEMU_ARCH_x86        = x86_64
97QEMU_ARCH_arm64      = aarch64
98QEMU_ARCH_arm        = arm
99QEMU_ARCH_mips32le   = mipsel  # works with malta_defconfig
100QEMU_ARCH_mips32be  = mips
101QEMU_ARCH_ppc        = ppc
102QEMU_ARCH_ppc64      = ppc64
103QEMU_ARCH_ppc64le    = ppc64
104QEMU_ARCH_riscv      = riscv64
105QEMU_ARCH_s390       = s390x
106QEMU_ARCH_loongarch  = loongarch64
107QEMU_ARCH            = $(QEMU_ARCH_$(XARCH))
108
109QEMU_ARCH_USER_ppc64le = ppc64le
110QEMU_ARCH_USER         = $(or $(QEMU_ARCH_USER_$(XARCH)),$(QEMU_ARCH_$(XARCH)))
111
112QEMU_BIOS_DIR = /usr/share/edk2/
113QEMU_BIOS_loongarch = $(QEMU_BIOS_DIR)/loongarch64/OVMF_CODE.fd
114
115ifneq ($(QEMU_BIOS_$(XARCH)),)
116QEMU_ARGS_BIOS = -bios $(QEMU_BIOS_$(XARCH))
117endif
118
119# QEMU_ARGS : some arch-specific args to pass to qemu
120QEMU_ARGS_i386       = -M pc -append "console=ttyS0,9600 i8042.noaux panic=-1 $(TEST:%=NOLIBC_TEST=%)"
121QEMU_ARGS_x86_64     = -M pc -append "console=ttyS0,9600 i8042.noaux panic=-1 $(TEST:%=NOLIBC_TEST=%)"
122QEMU_ARGS_x86        = -M pc -append "console=ttyS0,9600 i8042.noaux panic=-1 $(TEST:%=NOLIBC_TEST=%)"
123QEMU_ARGS_arm64      = -M virt -cpu cortex-a53 -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)"
124QEMU_ARGS_arm        = -M virt -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)"
125QEMU_ARGS_mips32le   = -M malta -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)"
126QEMU_ARGS_mips32be   = -M malta -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)"
127QEMU_ARGS_ppc        = -M g3beige -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)"
128QEMU_ARGS_ppc64      = -M powernv -append "console=hvc0 panic=-1 $(TEST:%=NOLIBC_TEST=%)"
129QEMU_ARGS_ppc64le    = -M powernv -append "console=hvc0 panic=-1 $(TEST:%=NOLIBC_TEST=%)"
130QEMU_ARGS_riscv      = -M virt -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)"
131QEMU_ARGS_s390       = -M s390-ccw-virtio -m 1G -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)"
132QEMU_ARGS_loongarch  = -M virt -append "console=ttyS0,115200 panic=-1 $(TEST:%=NOLIBC_TEST=%)"
133QEMU_ARGS            = $(QEMU_ARGS_$(XARCH)) $(QEMU_ARGS_BIOS) $(QEMU_ARGS_EXTRA)
134
135# OUTPUT is only set when run from the main makefile, otherwise
136# it defaults to this nolibc directory.
137OUTPUT ?= $(CURDIR)/
138
139ifeq ($(V),1)
140Q=
141else
142Q=@
143endif
144
145CFLAGS_i386 = $(call cc-option,-m32)
146CFLAGS_ppc = -m32 -mbig-endian -mno-vsx $(call cc-option,-mmultiple)
147CFLAGS_ppc64 = -m64 -mbig-endian -mno-vsx $(call cc-option,-mmultiple)
148CFLAGS_ppc64le = -m64 -mlittle-endian -mno-vsx $(call cc-option,-mabi=elfv2)
149CFLAGS_s390 = -m64
150CFLAGS_mips32le = -EL -mabi=32 -fPIC
151CFLAGS_mips32be = -EB -mabi=32
152CFLAGS_STACKPROTECTOR ?= $(call cc-option,-mstack-protector-guard=global $(call cc-option,-fstack-protector-all))
153CFLAGS  ?= -Os -fno-ident -fno-asynchronous-unwind-tables -std=c89 -W -Wall -Wextra \
154		$(call cc-option,-fno-stack-protector) \
155		$(CFLAGS_$(XARCH)) $(CFLAGS_STACKPROTECTOR) $(CFLAGS_EXTRA)
156LDFLAGS :=
157
158REPORT  ?= awk '/\[OK\][\r]*$$/{p++} /\[FAIL\][\r]*$$/{if (!f) printf("\n"); f++; print;} /\[SKIPPED\][\r]*$$/{s++} \
159		END{ printf("\n%3d test(s): %3d passed, %3d skipped, %3d failed => status: ", p+s+f, p, s, f); \
160		if (f) printf("failure\n"); else if (s) printf("warning\n"); else printf("success\n");; \
161		printf("\nSee all results in %s\n", ARGV[1]); }'
162
163help:
164	@echo "Supported targets under selftests/nolibc:"
165	@echo "  all               call the \"run\" target below"
166	@echo "  help              this help"
167	@echo "  sysroot           create the nolibc sysroot here (uses \$$ARCH)"
168	@echo "  nolibc-test       build the executable (uses \$$CC and \$$CROSS_COMPILE)"
169	@echo "  libc-test         build an executable using the compiler's default libc instead"
170	@echo "  run-user          runs the executable under QEMU (uses \$$XARCH, \$$TEST)"
171	@echo "  initramfs.cpio    prepare the initramfs archive with nolibc-test"
172	@echo "  initramfs         prepare the initramfs tree with nolibc-test"
173	@echo "  defconfig         create a fresh new default config (uses \$$XARCH)"
174	@echo "  kernel            (re)build the kernel (uses \$$XARCH)"
175	@echo "  kernel-standalone (re)build the kernel with the initramfs (uses \$$XARCH)"
176	@echo "  run               runs the kernel in QEMU after building it (uses \$$XARCH, \$$TEST)"
177	@echo "  rerun             runs a previously prebuilt kernel in QEMU (uses \$$XARCH, \$$TEST)"
178	@echo "  clean             clean the sysroot, initramfs, build and output files"
179	@echo ""
180	@echo "The output file is \"run.out\". Test ranges may be passed using \$$TEST."
181	@echo ""
182	@echo "Currently using the following variables:"
183	@echo "  ARCH          = $(ARCH)"
184	@echo "  XARCH         = $(XARCH)"
185	@echo "  CROSS_COMPILE = $(CROSS_COMPILE)"
186	@echo "  CC            = $(CC)"
187	@echo "  OUTPUT        = $(OUTPUT)"
188	@echo "  TEST          = $(TEST)"
189	@echo "  QEMU_ARCH     = $(if $(QEMU_ARCH),$(QEMU_ARCH),UNKNOWN_ARCH) [determined from \$$XARCH]"
190	@echo "  IMAGE_NAME    = $(if $(IMAGE_NAME),$(IMAGE_NAME),UNKNOWN_ARCH) [determined from \$$XARCH]"
191	@echo ""
192
193all: run
194
195sysroot: sysroot/$(ARCH)/include
196
197sysroot/$(ARCH)/include:
198	$(Q)rm -rf sysroot/$(ARCH) sysroot/sysroot
199	$(QUIET_MKDIR)mkdir -p sysroot
200	$(Q)$(MAKE) -C $(srctree) outputmakefile
201	$(Q)$(MAKE) -C $(srctree)/tools/include/nolibc ARCH=$(ARCH) OUTPUT=$(CURDIR)/sysroot/ headers_standalone
202	$(Q)mv sysroot/sysroot sysroot/$(ARCH)
203
204ifneq ($(NOLIBC_SYSROOT),0)
205nolibc-test: nolibc-test.c nolibc-test-linkage.c sysroot/$(ARCH)/include
206	$(QUIET_CC)$(CC) $(CFLAGS) $(LDFLAGS) -o $@ \
207	  -nostdlib -nostdinc -static -Isysroot/$(ARCH)/include nolibc-test.c nolibc-test-linkage.c -lgcc
208else
209nolibc-test: nolibc-test.c nolibc-test-linkage.c
210	$(QUIET_CC)$(CC) $(CFLAGS) $(LDFLAGS) -o $@ \
211	  -nostdlib -static -include $(srctree)/tools/include/nolibc/nolibc.h nolibc-test.c nolibc-test-linkage.c -lgcc
212endif
213
214libc-test: nolibc-test.c nolibc-test-linkage.c
215	$(QUIET_CC)$(HOSTCC) -o $@ nolibc-test.c nolibc-test-linkage.c
216
217# local libc-test
218run-libc-test: libc-test
219	$(Q)./libc-test > "$(CURDIR)/run.out" || :
220	$(Q)$(REPORT) $(CURDIR)/run.out
221
222# local nolibc-test
223run-nolibc-test: nolibc-test
224	$(Q)./nolibc-test > "$(CURDIR)/run.out" || :
225	$(Q)$(REPORT) $(CURDIR)/run.out
226
227# qemu user-land test
228run-user: nolibc-test
229	$(Q)qemu-$(QEMU_ARCH_USER) ./nolibc-test > "$(CURDIR)/run.out" || :
230	$(Q)$(REPORT) $(CURDIR)/run.out
231
232initramfs.cpio: kernel nolibc-test
233	$(QUIET_GEN)echo 'file /init nolibc-test 755 0 0' | $(objtree)/usr/gen_init_cpio - > initramfs.cpio
234
235initramfs: nolibc-test
236	$(QUIET_MKDIR)mkdir -p initramfs
237	$(call QUIET_INSTALL, initramfs/init)
238	$(Q)cp nolibc-test initramfs/init
239
240defconfig:
241	$(Q)$(MAKE) -C $(srctree) ARCH=$(ARCH) CC=$(CC) CROSS_COMPILE=$(CROSS_COMPILE) mrproper $(DEFCONFIG) prepare
242	$(Q)if [ -n "$(EXTRACONFIG)" ]; then \
243		$(srctree)/scripts/config --file $(objtree)/.config $(EXTRACONFIG); \
244		$(MAKE) -C $(srctree) ARCH=$(ARCH) CC=$(CC) CROSS_COMPILE=$(CROSS_COMPILE) olddefconfig < /dev/null; \
245	fi
246
247kernel:
248	$(Q)$(MAKE) -C $(srctree) ARCH=$(ARCH) CC=$(CC) CROSS_COMPILE=$(CROSS_COMPILE) $(IMAGE_NAME) < /dev/null
249
250kernel-standalone: initramfs
251	$(Q)$(MAKE) -C $(srctree) ARCH=$(ARCH) CC=$(CC) CROSS_COMPILE=$(CROSS_COMPILE) $(IMAGE_NAME) CONFIG_INITRAMFS_SOURCE=$(CURDIR)/initramfs < /dev/null
252
253# run the tests after building the kernel
254run: kernel initramfs.cpio
255	$(Q)qemu-system-$(QEMU_ARCH) -display none -no-reboot -kernel "$(IMAGE)" -initrd initramfs.cpio -serial stdio $(QEMU_ARGS) > "$(CURDIR)/run.out"
256	$(Q)$(REPORT) $(CURDIR)/run.out
257
258# re-run the tests from an existing kernel
259rerun:
260	$(Q)qemu-system-$(QEMU_ARCH) -display none -no-reboot -kernel "$(IMAGE)" -initrd initramfs.cpio -serial stdio $(QEMU_ARGS) > "$(CURDIR)/run.out"
261	$(Q)$(REPORT) $(CURDIR)/run.out
262
263# report with existing test log
264report:
265	$(Q)$(REPORT) $(CURDIR)/run.out
266
267clean:
268	$(call QUIET_CLEAN, sysroot)
269	$(Q)rm -rf sysroot
270	$(call QUIET_CLEAN, nolibc-test)
271	$(Q)rm -f nolibc-test
272	$(call QUIET_CLEAN, libc-test)
273	$(Q)rm -f libc-test
274	$(call QUIET_CLEAN, initramfs.cpio)
275	$(Q)rm -rf initramfs.cpio
276	$(call QUIET_CLEAN, initramfs)
277	$(Q)rm -rf initramfs
278	$(call QUIET_CLEAN, run.out)
279	$(Q)rm -rf run.out
280
281.PHONY: sysroot/$(ARCH)/include
282