xref: /linux/tools/testing/selftests/net/l2tp.sh (revision eed4edda910fe34dfae8c6bfbcf57f4593a54295) 
1#!/bin/bash
2# SPDX-License-Identifier: GPL-2.0
3#
4# L2TPv3 tunnel between 2 hosts
5#
6#            host-1          |   router   |     host-2
7#                            |            |
8#      lo          l2tp      |            |      l2tp           lo
9# 172.16.101.1  172.16.1.1   |            | 172.16.1.2    172.16.101.2
10#  fc00:101::1   fc00:1::1   |            |   fc00:1::2    fc00:101::2
11#                            |            |
12#                  eth0      |            |     eth0
13#                10.1.1.1    |            |   10.1.2.1
14#              2001:db8:1::1 |            | 2001:db8:2::1
15
16source lib.sh
17VERBOSE=0
18PAUSE_ON_FAIL=no
19
20which ping6 > /dev/null 2>&1 && ping6=$(which ping6) || ping6=$(which ping)
21
22################################################################################
23#
24log_test()
25{
26	local rc=$1
27	local expected=$2
28	local msg="$3"
29
30	if [ ${rc} -eq ${expected} ]; then
31		printf "TEST: %-60s  [ OK ]\n" "${msg}"
32		nsuccess=$((nsuccess+1))
33	else
34		ret=1
35		nfail=$((nfail+1))
36		printf "TEST: %-60s  [FAIL]\n" "${msg}"
37		if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
38			echo
39			echo "hit enter to continue, 'q' to quit"
40			read a
41			[ "$a" = "q" ] && exit 1
42		fi
43	fi
44}
45
46run_cmd()
47{
48	local ns
49	local cmd
50	local out
51	local rc
52
53	ns="$1"
54	shift
55	cmd="$*"
56
57	if [ "$VERBOSE" = "1" ]; then
58		printf "    COMMAND: $cmd\n"
59	fi
60
61	out=$(eval ip netns exec ${ns} ${cmd} 2>&1)
62	rc=$?
63	if [ "$VERBOSE" = "1" -a -n "$out" ]; then
64		echo "    $out"
65	fi
66
67	[ "$VERBOSE" = "1" ] && echo
68
69	return $rc
70}
71
72################################################################################
73# create namespaces and interconnects
74
75create_ns()
76{
77	local ns=$1
78	local addr=$2
79	local addr6=$3
80
81	[ -z "${addr}" ] && addr="-"
82	[ -z "${addr6}" ] && addr6="-"
83
84	if [ "${addr}" != "-" ]; then
85		ip -netns ${ns} addr add dev lo ${addr}
86	fi
87	if [ "${addr6}" != "-" ]; then
88		ip -netns ${ns} -6 addr add dev lo ${addr6}
89	fi
90
91	ip -netns ${ns} ro add unreachable default metric 8192
92	ip -netns ${ns} -6 ro add unreachable default metric 8192
93
94	ip netns exec ${ns} sysctl -qw net.ipv4.ip_forward=1
95	ip netns exec ${ns} sysctl -qw net.ipv6.conf.all.keep_addr_on_down=1
96	ip netns exec ${ns} sysctl -qw net.ipv6.conf.all.forwarding=1
97	ip netns exec ${ns} sysctl -qw net.ipv6.conf.default.forwarding=1
98	ip netns exec ${ns} sysctl -qw net.ipv6.conf.default.accept_dad=0
99}
100
101# create veth pair to connect namespaces and apply addresses.
102connect_ns()
103{
104	local ns1=$1
105	local ns1_dev=$2
106	local ns1_addr=$3
107	local ns1_addr6=$4
108	local ns2=$5
109	local ns2_dev=$6
110	local ns2_addr=$7
111	local ns2_addr6=$8
112
113	ip -netns ${ns1} li add ${ns1_dev} type veth peer name tmp
114	ip -netns ${ns1} li set ${ns1_dev} up
115	ip -netns ${ns1} li set tmp netns ${ns2} name ${ns2_dev}
116	ip -netns ${ns2} li set ${ns2_dev} up
117
118	if [ "${ns1_addr}" != "-" ]; then
119		ip -netns ${ns1} addr add dev ${ns1_dev} ${ns1_addr}
120		ip -netns ${ns2} addr add dev ${ns2_dev} ${ns2_addr}
121	fi
122
123	if [ "${ns1_addr6}" != "-" ]; then
124		ip -netns ${ns1} addr add dev ${ns1_dev} ${ns1_addr6}
125		ip -netns ${ns2} addr add dev ${ns2_dev} ${ns2_addr6}
126	fi
127}
128
129################################################################################
130# test setup
131
132cleanup()
133{
134	cleanup_ns $host_1 $host_2 $router
135}
136
137setup_l2tp_ipv4()
138{
139	#
140	# configure l2tpv3 tunnel on host-1
141	#
142	ip -netns $host_1 l2tp add tunnel tunnel_id 1041 peer_tunnel_id 1042 \
143			 encap ip local 10.1.1.1 remote 10.1.2.1
144	ip -netns $host_1 l2tp add session name l2tp4 tunnel_id 1041 \
145			 session_id 1041 peer_session_id 1042
146	ip -netns $host_1 link set dev l2tp4 up
147	ip -netns $host_1 addr add dev l2tp4 172.16.1.1 peer 172.16.1.2
148
149	#
150	# configure l2tpv3 tunnel on host-2
151	#
152	ip -netns $host_2 l2tp add tunnel tunnel_id 1042 peer_tunnel_id 1041 \
153			 encap ip local 10.1.2.1 remote 10.1.1.1
154	ip -netns $host_2 l2tp add session name l2tp4 tunnel_id 1042 \
155			 session_id 1042 peer_session_id 1041
156	ip -netns $host_2 link set dev l2tp4 up
157	ip -netns $host_2 addr add dev l2tp4 172.16.1.2 peer 172.16.1.1
158
159	#
160	# add routes to loopback addresses
161	#
162	ip -netns $host_1 ro add 172.16.101.2/32 via 172.16.1.2
163	ip -netns $host_2 ro add 172.16.101.1/32 via 172.16.1.1
164}
165
166setup_l2tp_ipv6()
167{
168	#
169	# configure l2tpv3 tunnel on host-1
170	#
171	ip -netns $host_1 l2tp add tunnel tunnel_id 1061 peer_tunnel_id 1062 \
172			 encap ip local 2001:db8:1::1 remote 2001:db8:2::1
173	ip -netns $host_1 l2tp add session name l2tp6 tunnel_id 1061 \
174			 session_id 1061 peer_session_id 1062
175	ip -netns $host_1 link set dev l2tp6 up
176	ip -netns $host_1 addr add dev l2tp6 fc00:1::1 peer fc00:1::2
177
178	#
179	# configure l2tpv3 tunnel on host-2
180	#
181	ip -netns $host_2 l2tp add tunnel tunnel_id 1062 peer_tunnel_id 1061 \
182			 encap ip local 2001:db8:2::1 remote 2001:db8:1::1
183	ip -netns $host_2 l2tp add session name l2tp6 tunnel_id 1062 \
184			 session_id 1062 peer_session_id 1061
185	ip -netns $host_2 link set dev l2tp6 up
186	ip -netns $host_2 addr add dev l2tp6 fc00:1::2 peer fc00:1::1
187
188	#
189	# add routes to loopback addresses
190	#
191	ip -netns $host_1 -6 ro add fc00:101::2/128 via fc00:1::2
192	ip -netns $host_2 -6 ro add fc00:101::1/128 via fc00:1::1
193}
194
195setup()
196{
197	# start clean
198	cleanup
199
200	set -e
201	setup_ns host_1 host_2 router
202	create_ns $host_1 172.16.101.1/32 fc00:101::1/128
203	create_ns $host_2 172.16.101.2/32 fc00:101::2/128
204	create_ns $router
205
206	connect_ns $host_1 eth0 10.1.1.1/24 2001:db8:1::1/64 \
207	           $router eth1 10.1.1.2/24 2001:db8:1::2/64
208
209	connect_ns $host_2 eth0 10.1.2.1/24 2001:db8:2::1/64 \
210	           $router eth2 10.1.2.2/24 2001:db8:2::2/64
211
212	ip -netns $host_1 ro add 10.1.2.0/24 via 10.1.1.2
213	ip -netns $host_1 -6 ro add 2001:db8:2::/64 via 2001:db8:1::2
214
215	ip -netns $host_2 ro add 10.1.1.0/24 via 10.1.2.2
216	ip -netns $host_2 -6 ro add 2001:db8:1::/64 via 2001:db8:2::2
217
218	setup_l2tp_ipv4
219	setup_l2tp_ipv6
220	set +e
221}
222
223setup_ipsec()
224{
225	#
226	# IPv4
227	#
228	run_cmd $host_1 ip xfrm policy add \
229		src 10.1.1.1 dst 10.1.2.1 dir out \
230		tmpl proto esp mode transport
231
232	run_cmd $host_1 ip xfrm policy add \
233		src 10.1.2.1 dst 10.1.1.1 dir in \
234		tmpl proto esp mode transport
235
236	run_cmd $host_2 ip xfrm policy add \
237		src 10.1.1.1 dst 10.1.2.1 dir in \
238		tmpl proto esp mode transport
239
240	run_cmd $host_2 ip xfrm policy add \
241		src 10.1.2.1 dst 10.1.1.1 dir out \
242		tmpl proto esp mode transport
243
244	ip -netns $host_1 xfrm state add \
245		src 10.1.1.1 dst 10.1.2.1 \
246		spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' \
247		0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
248
249	ip -netns $host_1 xfrm state add \
250		src 10.1.2.1 dst 10.1.1.1 \
251		spi 0x1001 proto esp aead 'rfc4106(gcm(aes))' \
252		0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
253
254	ip -netns $host_2 xfrm state add \
255		src 10.1.1.1 dst 10.1.2.1 \
256		spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' \
257		0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
258
259	ip -netns $host_2 xfrm state add \
260		src 10.1.2.1 dst 10.1.1.1 \
261		spi 0x1001 proto esp aead 'rfc4106(gcm(aes))' \
262		0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
263
264	#
265	# IPV6
266	#
267	run_cmd $host_1 ip -6 xfrm policy add \
268		src 2001:db8:1::1 dst 2001:db8:2::1 dir out \
269		tmpl proto esp mode transport
270
271	run_cmd $host_1 ip -6 xfrm policy add \
272		src 2001:db8:2::1 dst 2001:db8:1::1 dir in \
273		tmpl proto esp mode transport
274
275	run_cmd $host_2 ip -6 xfrm policy add \
276		src 2001:db8:1::1 dst 2001:db8:2::1 dir in \
277		tmpl proto esp mode transport
278
279	run_cmd $host_2 ip -6 xfrm policy add \
280		src 2001:db8:2::1 dst 2001:db8:1::1 dir out \
281		tmpl proto esp mode transport
282
283	ip -netns $host_1 -6 xfrm state add \
284		src 2001:db8:1::1 dst 2001:db8:2::1 \
285		spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' \
286		0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
287
288	ip -netns $host_1 -6 xfrm state add \
289		src 2001:db8:2::1 dst 2001:db8:1::1 \
290		spi 0x1001 proto esp aead 'rfc4106(gcm(aes))' \
291		0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
292
293	ip -netns $host_2 -6 xfrm state add \
294		src 2001:db8:1::1 dst 2001:db8:2::1 \
295		spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' \
296		0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
297
298	ip -netns $host_2 -6 xfrm state add \
299		src 2001:db8:2::1 dst 2001:db8:1::1 \
300		spi 0x1001 proto esp aead 'rfc4106(gcm(aes))' \
301		0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
302}
303
304teardown_ipsec()
305{
306	run_cmd $host_1 ip xfrm state flush
307	run_cmd $host_1 ip xfrm policy flush
308	run_cmd $host_2 ip xfrm state flush
309	run_cmd $host_2 ip xfrm policy flush
310}
311
312################################################################################
313# generate traffic through tunnel for various cases
314
315run_ping()
316{
317	local desc="$1"
318
319	run_cmd $host_1 ping -c1 -w1 172.16.1.2
320	log_test $? 0 "IPv4 basic L2TP tunnel ${desc}"
321
322	run_cmd $host_1 ping -c1 -w1 -I 172.16.101.1 172.16.101.2
323	log_test $? 0 "IPv4 route through L2TP tunnel ${desc}"
324
325	run_cmd $host_1 ${ping6} -c1 -w1 fc00:1::2
326	log_test $? 0 "IPv6 basic L2TP tunnel ${desc}"
327
328	run_cmd $host_1 ${ping6} -c1 -w1 -I fc00:101::1 fc00:101::2
329	log_test $? 0 "IPv6 route through L2TP tunnel ${desc}"
330}
331
332run_tests()
333{
334	local desc
335
336	setup
337	run_ping
338
339	setup_ipsec
340	run_ping "- with IPsec"
341	run_cmd $host_1 ping -c1 -w1 172.16.1.2
342	log_test $? 0 "IPv4 basic L2TP tunnel ${desc}"
343
344	run_cmd $host_1 ping -c1 -w1 -I 172.16.101.1 172.16.101.2
345	log_test $? 0 "IPv4 route through L2TP tunnel ${desc}"
346
347	run_cmd $host_1 ${ping6} -c1 -w1 fc00:1::2
348	log_test $? 0 "IPv6 basic L2TP tunnel - with IPsec"
349
350	run_cmd $host_1 ${ping6} -c1 -w1 -I fc00:101::1 fc00:101::2
351	log_test $? 0 "IPv6 route through L2TP tunnel - with IPsec"
352
353	teardown_ipsec
354	run_ping "- after IPsec teardown"
355}
356
357################################################################################
358# main
359
360declare -i nfail=0
361declare -i nsuccess=0
362
363while getopts :pv o
364do
365	case $o in
366		p) PAUSE_ON_FAIL=yes;;
367		v) VERBOSE=$(($VERBOSE + 1));;
368		*) exit 1;;
369	esac
370done
371
372run_tests
373cleanup
374
375printf "\nTests passed: %3d\n" ${nsuccess}
376printf "Tests failed: %3d\n"   ${nfail}
377