1#!/bin/bash 2# SPDX-License-Identifier: GPL-2.0 3# 4# Validate cached routes in fib{6}_nh that is used by multiple prefixes. 5# Validate a different # exception is generated in h0 for each remote host. 6# 7# h1 8# / 9# h0 - r1 - h2 10# \ 11# h3 12# 13# routing in h0 to hN is done with nexthop objects. 14 15source lib.sh 16PAUSE_ON_FAIL=no 17VERBOSE=0 18 19which ping6 > /dev/null 2>&1 && ping6=$(which ping6) || ping6=$(which ping) 20 21################################################################################ 22# helpers 23 24log_test() 25{ 26 local rc=$1 27 local expected=$2 28 local msg="$3" 29 30 if [ ${rc} -eq ${expected} ]; then 31 printf "TEST: %-60s [ OK ]\n" "${msg}" 32 nsuccess=$((nsuccess+1)) 33 else 34 ret=1 35 nfail=$((nfail+1)) 36 printf "TEST: %-60s [FAIL]\n" "${msg}" 37 if [ "${PAUSE_ON_FAIL}" = "yes" ]; then 38 echo 39 echo "hit enter to continue, 'q' to quit" 40 read a 41 [ "$a" = "q" ] && exit 1 42 fi 43 fi 44 45 [ "$VERBOSE" = "1" ] && echo 46} 47 48run_cmd() 49{ 50 local cmd="$*" 51 local out 52 local rc 53 54 if [ "$VERBOSE" = "1" ]; then 55 echo "COMMAND: $cmd" 56 fi 57 58 out=$(eval $cmd 2>&1) 59 rc=$? 60 if [ "$VERBOSE" = "1" -a -n "$out" ]; then 61 echo "$out" 62 fi 63 64 [ "$VERBOSE" = "1" ] && echo 65 66 return $rc 67} 68 69################################################################################ 70# config 71 72create_ns() 73{ 74 local ns=${1} 75 76 ip netns exec ${ns} sysctl -q -w net.ipv6.conf.all.keep_addr_on_down=1 77 case ${ns} in 78 h*) 79 ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=0 80 ;; 81 r*) 82 ip netns exec $ns sysctl -q -w net.ipv4.ip_forward=1 83 ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=1 84 ;; 85 esac 86} 87 88setup() 89{ 90 local ns 91 local i 92 93 #set -e 94 95 setup_ns h0 r1 h1 h2 h3 96 h[0]=$h0 97 h[1]=$h1 98 h[2]=$h2 99 h[3]=$h3 100 r[1]=$r1 101 for ns in ${h[0]} ${r[1]} ${h[1]} ${h[2]} ${h[3]} 102 do 103 create_ns ${ns} 104 done 105 106 # 107 # create interconnects 108 # 109 110 for i in 0 1 2 3 111 do 112 ip -netns ${h[$i]} li add eth0 type veth peer name r1h${i} 113 ip -netns ${h[$i]} li set eth0 up 114 ip -netns ${h[$i]} li set r1h${i} netns ${r[1]} name eth${i} up 115 116 ip -netns ${h[$i]} addr add dev eth0 172.16.10${i}.1/24 117 ip -netns ${h[$i]} -6 addr add dev eth0 2001:db8:10${i}::1/64 118 ip -netns ${r[1]} addr add dev eth${i} 172.16.10${i}.254/24 119 ip -netns ${r[1]} -6 addr add dev eth${i} 2001:db8:10${i}::64/64 120 done 121 122 ip -netns ${h[0]} nexthop add id 4 via 172.16.100.254 dev eth0 123 ip -netns ${h[0]} nexthop add id 6 via 2001:db8:100::64 dev eth0 124 125 # routing from ${h[0]} to h1-h3 and back 126 for i in 1 2 3 127 do 128 ip -netns ${h[0]} ro add 172.16.10${i}.0/24 nhid 4 129 ip -netns ${h[$i]} ro add 172.16.100.0/24 via 172.16.10${i}.254 130 131 ip -netns ${h[0]} -6 ro add 2001:db8:10${i}::/64 nhid 6 132 ip -netns ${h[$i]} -6 ro add 2001:db8:100::/64 via 2001:db8:10${i}::64 133 done 134 135 if [ "$VERBOSE" = "1" ]; then 136 echo 137 echo "host 1 config" 138 ip -netns ${h[0]} li sh 139 ip -netns ${h[0]} ro sh 140 ip -netns ${h[0]} -6 ro sh 141 fi 142 143 #set +e 144} 145 146cleanup() 147{ 148 cleanup_all_ns 149} 150 151change_mtu() 152{ 153 local hostid=$1 154 local mtu=$2 155 156 run_cmd ip -netns h${hostid} li set eth0 mtu ${mtu} 157 run_cmd ip -netns ${r1} li set eth${hostid} mtu ${mtu} 158} 159 160################################################################################ 161# validate exceptions 162 163validate_v4_exception() 164{ 165 local i=$1 166 local mtu=$2 167 local ping_sz=$3 168 local dst="172.16.10${i}.1" 169 local h0_ip=172.16.100.1 170 local r1_ip=172.16.100.254 171 local rc 172 173 if [ ${ping_sz} != "0" ]; then 174 run_cmd ip netns exec ${h0} ping -s ${ping_sz} -c5 -w5 ${dst} 175 fi 176 177 if [ "$VERBOSE" = "1" ]; then 178 echo "Route get" 179 ip -netns ${h0} ro get ${dst} 180 echo "Searching for:" 181 echo " cache .* mtu ${mtu}" 182 echo 183 fi 184 185 ip -netns ${h0} ro get ${dst} | \ 186 grep -q "cache .* mtu ${mtu}" 187 rc=$? 188 189 log_test $rc 0 "IPv4: host 0 to host ${i}, mtu ${mtu}" 190} 191 192validate_v6_exception() 193{ 194 local i=$1 195 local mtu=$2 196 local ping_sz=$3 197 local dst="2001:db8:10${i}::1" 198 local h0_ip=2001:db8:100::1 199 local r1_ip=2001:db8:100::64 200 local rc 201 202 if [ ${ping_sz} != "0" ]; then 203 run_cmd ip netns exec ${h0} ${ping6} -s ${ping_sz} -c5 -w5 ${dst} 204 fi 205 206 if [ "$VERBOSE" = "1" ]; then 207 echo "Route get" 208 ip -netns ${h0} -6 ro get ${dst} 209 echo "Searching for:" 210 echo " ${dst}.* via ${r1_ip} dev eth0 src ${h0_ip} .* mtu ${mtu}" 211 echo 212 fi 213 214 ip -netns ${h0} -6 ro get ${dst} | \ 215 grep -q "${dst}.* via ${r1_ip} dev eth0 src ${h0_ip} .* mtu ${mtu}" 216 rc=$? 217 218 log_test $rc 0 "IPv6: host 0 to host ${i}, mtu ${mtu}" 219} 220 221################################################################################ 222# main 223 224while getopts :pv o 225do 226 case $o in 227 p) PAUSE_ON_FAIL=yes;; 228 v) VERBOSE=1;; 229 esac 230done 231 232cleanup 233setup 234sleep 2 235 236cpus=$(cat /sys/devices/system/cpu/online) 237cpus="$(seq ${cpus/-/ })" 238ret=0 239for i in 1 2 3 240do 241 # generate a cached route per-cpu 242 for c in ${cpus}; do 243 run_cmd taskset -c ${c} ip netns exec ${h0} ping -c1 -w1 172.16.10${i}.1 244 [ $? -ne 0 ] && printf "\nERROR: ping to ${h[$i]} failed\n" && ret=1 245 246 run_cmd taskset -c ${c} ip netns exec ${h0} ${ping6} -c1 -w1 2001:db8:10${i}::1 247 [ $? -ne 0 ] && printf "\nERROR: ping6 to ${h[$i]} failed\n" && ret=1 248 249 [ $ret -ne 0 ] && break 250 done 251 [ $ret -ne 0 ] && break 252done 253 254if [ $ret -eq 0 ]; then 255 # generate different exceptions in h0 for h1, h2 and h3 256 change_mtu 1 1300 257 validate_v4_exception 1 1300 1350 258 validate_v6_exception 1 1300 1350 259 echo 260 261 change_mtu 2 1350 262 validate_v4_exception 2 1350 1400 263 validate_v6_exception 2 1350 1400 264 echo 265 266 change_mtu 3 1400 267 validate_v4_exception 3 1400 1450 268 validate_v6_exception 3 1400 1450 269 echo 270 271 validate_v4_exception 1 1300 0 272 validate_v6_exception 1 1300 0 273 echo 274 275 validate_v4_exception 2 1350 0 276 validate_v6_exception 2 1350 0 277 echo 278 279 validate_v4_exception 3 1400 0 280 validate_v6_exception 3 1400 0 281 282 # targeted deletes to trigger cleanup paths in kernel 283 ip -netns ${h0} ro del 172.16.102.0/24 nhid 4 284 ip -netns ${h0} -6 ro del 2001:db8:102::/64 nhid 6 285 286 ip -netns ${h0} nexthop del id 4 287 ip -netns ${h0} nexthop del id 6 288fi 289 290cleanup 291