xref: /linux/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_router.sh (revision 63307d015b91e626c97bb82e88054af3d0b74643)
1#!/bin/bash
2# SPDX-License-Identifier: GPL-2.0
3
4# Test for DSCP prioritization in the router.
5#
6# With ip_forward_update_priority disabled, the packets are expected to keep
7# their DSCP (which in this test uses only values 0..7) intact as they are
8# forwarded by the switch. That is verified at $h2. ICMP responses are formed
9# with the same DSCP as the requests, and likewise pass through the switch
10# intact, which is verified at $h1.
11#
12# With ip_forward_update_priority enabled, router reprioritizes the packets
13# according to the table in reprioritize(). Thus, say, DSCP 7 maps to priority
14# 4, which on egress maps back to DSCP 4. The response packet then gets
15# reprioritized to 6, getting DSCP 6 on egress.
16#
17# +----------------------+                             +----------------------+
18# | H1                   |                             |                   H2 |
19# |    + $h1             |                             |            $h2 +     |
20# |    | 192.0.2.1/28    |                             |  192.0.2.18/28 |     |
21# +----|-----------------+                             +----------------|-----+
22#      |                                                                |
23# +----|----------------------------------------------------------------|-----+
24# | SW |                                                                |     |
25# |    + $swp1                                                    $swp2 +     |
26# |      192.0.2.2/28                                     192.0.2.17/28       |
27# |      APP=0,5,0 .. 7,5,7                          APP=0,5,0 .. 7,5,7       |
28# +---------------------------------------------------------------------------+
29
30ALL_TESTS="
31	ping_ipv4
32	test_update
33	test_no_update
34"
35
36lib_dir=$(dirname $0)/../../../net/forwarding
37
38NUM_NETIFS=4
39source $lib_dir/lib.sh
40
41reprioritize()
42{
43	local in=$1; shift
44
45	# This is based on rt_tos2priority in include/net/route.h. Assuming 1:1
46	# mapping between priorities and TOS, it yields a new priority for a
47	# packet with ingress priority of $in.
48	local -a reprio=(0 0 2 2 6 6 4 4)
49
50	echo ${reprio[$in]}
51}
52
53h1_create()
54{
55	local dscp;
56
57	simple_if_init $h1 192.0.2.1/28
58	tc qdisc add dev $h1 clsact
59	dscp_capture_install $h1 0
60	ip route add vrf v$h1 192.0.2.16/28 via 192.0.2.2
61}
62
63h1_destroy()
64{
65	ip route del vrf v$h1 192.0.2.16/28 via 192.0.2.2
66	dscp_capture_uninstall $h1 0
67	tc qdisc del dev $h1 clsact
68	simple_if_fini $h1 192.0.2.1/28
69}
70
71h2_create()
72{
73	simple_if_init $h2 192.0.2.18/28
74	tc qdisc add dev $h2 clsact
75	dscp_capture_install $h2 0
76	ip route add vrf v$h2 192.0.2.0/28 via 192.0.2.17
77}
78
79h2_destroy()
80{
81	ip route del vrf v$h2 192.0.2.0/28 via 192.0.2.17
82	dscp_capture_uninstall $h2 0
83	tc qdisc del dev $h2 clsact
84	simple_if_fini $h2 192.0.2.18/28
85}
86
87dscp_map()
88{
89	local base=$1; shift
90
91	for prio in {0..7}; do
92		echo app=$prio,5,$((base + prio))
93	done
94}
95
96switch_create()
97{
98	simple_if_init $swp1 192.0.2.2/28
99	__simple_if_init $swp2 v$swp1 192.0.2.17/28
100
101	lldptool -T -i $swp1 -V APP $(dscp_map 0) >/dev/null
102	lldptool -T -i $swp2 -V APP $(dscp_map 0) >/dev/null
103	lldpad_app_wait_set $swp1
104	lldpad_app_wait_set $swp2
105}
106
107switch_destroy()
108{
109	lldptool -T -i $swp2 -V APP -d $(dscp_map 0) >/dev/null
110	lldptool -T -i $swp1 -V APP -d $(dscp_map 0) >/dev/null
111	lldpad_app_wait_del
112
113	__simple_if_fini $swp2 192.0.2.17/28
114	simple_if_fini $swp1 192.0.2.2/28
115}
116
117setup_prepare()
118{
119	h1=${NETIFS[p1]}
120	swp1=${NETIFS[p2]}
121
122	swp2=${NETIFS[p3]}
123	h2=${NETIFS[p4]}
124
125	vrf_prepare
126
127	sysctl_set net.ipv4.ip_forward_update_priority 1
128	h1_create
129	h2_create
130	switch_create
131}
132
133cleanup()
134{
135	pre_cleanup
136
137	switch_destroy
138	h2_destroy
139	h1_destroy
140	sysctl_restore net.ipv4.ip_forward_update_priority
141
142	vrf_cleanup
143}
144
145ping_ipv4()
146{
147	ping_test $h1 192.0.2.18
148}
149
150dscp_ping_test()
151{
152	local vrf_name=$1; shift
153	local sip=$1; shift
154	local dip=$1; shift
155	local prio=$1; shift
156	local reprio=$1; shift
157	local dev1=$1; shift
158	local dev2=$1; shift
159
160	local prio2=$($reprio $prio)   # ICMP Request egress prio
161	local prio3=$($reprio $prio2)  # ICMP Response egress prio
162
163	local dscp=$((prio << 2))     # ICMP Request ingress DSCP
164	local dscp2=$((prio2 << 2))   # ICMP Request egress DSCP
165	local dscp3=$((prio3 << 2))   # ICMP Response egress DSCP
166
167	RET=0
168
169	eval "local -A dev1_t0s=($(dscp_fetch_stats $dev1 0))"
170	eval "local -A dev2_t0s=($(dscp_fetch_stats $dev2 0))"
171
172	local ping_timeout=$((PING_TIMEOUT * 5))
173	ip vrf exec $vrf_name \
174	   ${PING} -Q $dscp ${sip:+-I $sip} $dip \
175		   -c 10 -i 0.5 -w $ping_timeout &> /dev/null
176
177	eval "local -A dev1_t1s=($(dscp_fetch_stats $dev1 0))"
178	eval "local -A dev2_t1s=($(dscp_fetch_stats $dev2 0))"
179
180	for i in {0..7}; do
181		local dscpi=$((i << 2))
182		local expect2=0
183		local expect3=0
184
185		if ((i == prio2)); then
186			expect2=10
187		fi
188		if ((i == prio3)); then
189			expect3=10
190		fi
191
192		local delta=$((dev2_t1s[$i] - dev2_t0s[$i]))
193		((expect2 == delta))
194		check_err $? "DSCP $dscpi@$dev2: Expected to capture $expect2 packets, got $delta."
195
196		delta=$((dev1_t1s[$i] - dev1_t0s[$i]))
197		((expect3 == delta))
198		check_err $? "DSCP $dscpi@$dev1: Expected to capture $expect3 packets, got $delta."
199	done
200
201	log_test "DSCP rewrite: $dscp-(prio $prio2)-$dscp2-(prio $prio3)-$dscp3"
202}
203
204__test_update()
205{
206	local update=$1; shift
207	local reprio=$1; shift
208
209	sysctl_restore net.ipv4.ip_forward_update_priority
210	sysctl_set net.ipv4.ip_forward_update_priority $update
211
212	for prio in {0..7}; do
213		dscp_ping_test v$h1 192.0.2.1 192.0.2.18 $prio $reprio $h1 $h2
214	done
215}
216
217test_update()
218{
219	__test_update 1 reprioritize
220}
221
222test_no_update()
223{
224	__test_update 0 echo
225}
226
227trap cleanup EXIT
228
229setup_prepare
230setup_wait
231
232tests_run
233
234exit $EXIT_STATUS
235