xref: /linux/tools/testing/selftests/bpf/progs/test_xdp_vlan.c (revision 02680c23d7b3febe45ea3d4f9818c2b2dc89020a)
1 /* SPDX-License-Identifier: GPL-2.0
2  *  Copyright(c) 2018 Jesper Dangaard Brouer.
3  *
4  * XDP/TC VLAN manipulation example
5  *
6  * GOTCHA: Remember to disable NIC hardware offloading of VLANs,
7  * else the VLAN tags are NOT inlined in the packet payload:
8  *
9  *  # ethtool -K ixgbe2 rxvlan off
10  *
11  * Verify setting:
12  *  # ethtool -k ixgbe2 | grep rx-vlan-offload
13  *  rx-vlan-offload: off
14  *
15  */
16 #include <stddef.h>
17 #include <stdbool.h>
18 #include <string.h>
19 #include <linux/bpf.h>
20 #include <linux/if_ether.h>
21 #include <linux/if_vlan.h>
22 #include <linux/in.h>
23 #include <linux/pkt_cls.h>
24 
25 #include <bpf/bpf_helpers.h>
26 #include <bpf/bpf_endian.h>
27 
28 /* linux/if_vlan.h have not exposed this as UAPI, thus mirror some here
29  *
30  *	struct vlan_hdr - vlan header
31  *	@h_vlan_TCI: priority and VLAN ID
32  *	@h_vlan_encapsulated_proto: packet type ID or len
33  */
34 struct _vlan_hdr {
35 	__be16 h_vlan_TCI;
36 	__be16 h_vlan_encapsulated_proto;
37 };
38 #define VLAN_PRIO_MASK		0xe000 /* Priority Code Point */
39 #define VLAN_PRIO_SHIFT		13
40 #define VLAN_CFI_MASK		0x1000 /* Canonical Format Indicator */
41 #define VLAN_TAG_PRESENT	VLAN_CFI_MASK
42 #define VLAN_VID_MASK		0x0fff /* VLAN Identifier */
43 #define VLAN_N_VID		4096
44 
45 struct parse_pkt {
46 	__u16 l3_proto;
47 	__u16 l3_offset;
48 	__u16 vlan_outer;
49 	__u16 vlan_inner;
50 	__u8  vlan_outer_offset;
51 	__u8  vlan_inner_offset;
52 };
53 
54 char _license[] SEC("license") = "GPL";
55 
56 static __always_inline
57 bool parse_eth_frame(struct ethhdr *eth, void *data_end, struct parse_pkt *pkt)
58 {
59 	__u16 eth_type;
60 	__u8 offset;
61 
62 	offset = sizeof(*eth);
63 	/* Make sure packet is large enough for parsing eth + 2 VLAN headers */
64 	if ((void *)eth + offset + (2*sizeof(struct _vlan_hdr)) > data_end)
65 		return false;
66 
67 	eth_type = eth->h_proto;
68 
69 	/* Handle outer VLAN tag */
70 	if (eth_type == bpf_htons(ETH_P_8021Q)
71 	    || eth_type == bpf_htons(ETH_P_8021AD)) {
72 		struct _vlan_hdr *vlan_hdr;
73 
74 		vlan_hdr = (void *)eth + offset;
75 		pkt->vlan_outer_offset = offset;
76 		pkt->vlan_outer = bpf_ntohs(vlan_hdr->h_vlan_TCI)
77 				& VLAN_VID_MASK;
78 		eth_type        = vlan_hdr->h_vlan_encapsulated_proto;
79 		offset += sizeof(*vlan_hdr);
80 	}
81 
82 	/* Handle inner (double) VLAN tag */
83 	if (eth_type == bpf_htons(ETH_P_8021Q)
84 	    || eth_type == bpf_htons(ETH_P_8021AD)) {
85 		struct _vlan_hdr *vlan_hdr;
86 
87 		vlan_hdr = (void *)eth + offset;
88 		pkt->vlan_inner_offset = offset;
89 		pkt->vlan_inner = bpf_ntohs(vlan_hdr->h_vlan_TCI)
90 				& VLAN_VID_MASK;
91 		eth_type        = vlan_hdr->h_vlan_encapsulated_proto;
92 		offset += sizeof(*vlan_hdr);
93 	}
94 
95 	pkt->l3_proto = bpf_ntohs(eth_type); /* Convert to host-byte-order */
96 	pkt->l3_offset = offset;
97 
98 	return true;
99 }
100 
101 /* Hint, VLANs are choosen to hit network-byte-order issues */
102 #define TESTVLAN 4011 /* 0xFAB */
103 // #define TO_VLAN  4000 /* 0xFA0 (hint 0xOA0 = 160) */
104 
105 SEC("xdp_drop_vlan_4011")
106 int  xdp_prognum0(struct xdp_md *ctx)
107 {
108 	void *data_end = (void *)(long)ctx->data_end;
109 	void *data     = (void *)(long)ctx->data;
110 	struct parse_pkt pkt = { 0 };
111 
112 	if (!parse_eth_frame(data, data_end, &pkt))
113 		return XDP_ABORTED;
114 
115 	/* Drop specific VLAN ID example */
116 	if (pkt.vlan_outer == TESTVLAN)
117 		return XDP_ABORTED;
118 	/*
119 	 * Using XDP_ABORTED makes it possible to record this event,
120 	 * via tracepoint xdp:xdp_exception like:
121 	 *  # perf record -a -e xdp:xdp_exception
122 	 *  # perf script
123 	 */
124 	return XDP_PASS;
125 }
126 /*
127 Commands to setup VLAN on Linux to test packets gets dropped:
128 
129  export ROOTDEV=ixgbe2
130  export VLANID=4011
131  ip link add link $ROOTDEV name $ROOTDEV.$VLANID type vlan id $VLANID
132  ip link set dev  $ROOTDEV.$VLANID up
133 
134  ip link set dev $ROOTDEV mtu 1508
135  ip addr add 100.64.40.11/24 dev $ROOTDEV.$VLANID
136 
137 Load prog with ip tool:
138 
139  ip link set $ROOTDEV xdp off
140  ip link set $ROOTDEV xdp object xdp_vlan01_kern.o section xdp_drop_vlan_4011
141 
142 */
143 
144 /* Changing VLAN to zero, have same practical effect as removing the VLAN. */
145 #define TO_VLAN	0
146 
147 SEC("xdp_vlan_change")
148 int  xdp_prognum1(struct xdp_md *ctx)
149 {
150 	void *data_end = (void *)(long)ctx->data_end;
151 	void *data     = (void *)(long)ctx->data;
152 	struct parse_pkt pkt = { 0 };
153 
154 	if (!parse_eth_frame(data, data_end, &pkt))
155 		return XDP_ABORTED;
156 
157 	/* Change specific VLAN ID */
158 	if (pkt.vlan_outer == TESTVLAN) {
159 		struct _vlan_hdr *vlan_hdr = data + pkt.vlan_outer_offset;
160 
161 		/* Modifying VLAN, preserve top 4 bits */
162 		vlan_hdr->h_vlan_TCI =
163 			bpf_htons((bpf_ntohs(vlan_hdr->h_vlan_TCI) & 0xf000)
164 				  | TO_VLAN);
165 	}
166 
167 	return XDP_PASS;
168 }
169 
170 /*
171  * Show XDP+TC can cooperate, on creating a VLAN rewriter.
172  * 1. Create a XDP prog that can "pop"/remove a VLAN header.
173  * 2. Create a TC-bpf prog that egress can add a VLAN header.
174  */
175 
176 #ifndef ETH_ALEN /* Ethernet MAC address length */
177 #define ETH_ALEN	6	/* bytes */
178 #endif
179 #define VLAN_HDR_SZ	4	/* bytes */
180 
181 SEC("xdp_vlan_remove_outer")
182 int  xdp_prognum2(struct xdp_md *ctx)
183 {
184 	void *data_end = (void *)(long)ctx->data_end;
185 	void *data     = (void *)(long)ctx->data;
186 	struct parse_pkt pkt = { 0 };
187 	char *dest;
188 
189 	if (!parse_eth_frame(data, data_end, &pkt))
190 		return XDP_ABORTED;
191 
192 	/* Skip packet if no outer VLAN was detected */
193 	if (pkt.vlan_outer_offset == 0)
194 		return XDP_PASS;
195 
196 	/* Moving Ethernet header, dest overlap with src, memmove handle this */
197 	dest = data;
198 	dest+= VLAN_HDR_SZ;
199 	/*
200 	 * Notice: Taking over vlan_hdr->h_vlan_encapsulated_proto, by
201 	 * only moving two MAC addrs (12 bytes), not overwriting last 2 bytes
202 	 */
203 	__builtin_memmove(dest, data, ETH_ALEN * 2);
204 	/* Note: LLVM built-in memmove inlining require size to be constant */
205 
206 	/* Move start of packet header seen by Linux kernel stack */
207 	bpf_xdp_adjust_head(ctx, VLAN_HDR_SZ);
208 
209 	return XDP_PASS;
210 }
211 
212 static __always_inline
213 void shift_mac_4bytes_16bit(void *data)
214 {
215 	__u16 *p = data;
216 
217 	p[7] = p[5]; /* delete p[7] was vlan_hdr->h_vlan_TCI */
218 	p[6] = p[4]; /* delete p[6] was ethhdr->h_proto */
219 	p[5] = p[3];
220 	p[4] = p[2];
221 	p[3] = p[1];
222 	p[2] = p[0];
223 }
224 
225 static __always_inline
226 void shift_mac_4bytes_32bit(void *data)
227 {
228 	__u32 *p = data;
229 
230 	/* Assuming VLAN hdr present. The 4 bytes in p[3] that gets
231 	 * overwritten, is ethhdr->h_proto and vlan_hdr->h_vlan_TCI.
232 	 * The vlan_hdr->h_vlan_encapsulated_proto take over role as
233 	 * ethhdr->h_proto.
234 	 */
235 	p[3] = p[2];
236 	p[2] = p[1];
237 	p[1] = p[0];
238 }
239 
240 SEC("xdp_vlan_remove_outer2")
241 int  xdp_prognum3(struct xdp_md *ctx)
242 {
243 	void *data_end = (void *)(long)ctx->data_end;
244 	void *data     = (void *)(long)ctx->data;
245 	struct ethhdr *orig_eth = data;
246 	struct parse_pkt pkt = { 0 };
247 
248 	if (!parse_eth_frame(orig_eth, data_end, &pkt))
249 		return XDP_ABORTED;
250 
251 	/* Skip packet if no outer VLAN was detected */
252 	if (pkt.vlan_outer_offset == 0)
253 		return XDP_PASS;
254 
255 	/* Simply shift down MAC addrs 4 bytes, overwrite h_proto + TCI */
256 	shift_mac_4bytes_32bit(data);
257 
258 	/* Move start of packet header seen by Linux kernel stack */
259 	bpf_xdp_adjust_head(ctx, VLAN_HDR_SZ);
260 
261 	return XDP_PASS;
262 }
263 
264 /*=====================================
265  *  BELOW: TC-hook based ebpf programs
266  * ====================================
267  * The TC-clsact eBPF programs (currently) need to be attach via TC commands
268  */
269 
270 SEC("tc_vlan_push")
271 int _tc_progA(struct __sk_buff *ctx)
272 {
273 	bpf_skb_vlan_push(ctx, bpf_htons(ETH_P_8021Q), TESTVLAN);
274 
275 	return TC_ACT_OK;
276 }
277 /*
278 Commands to setup TC to use above bpf prog:
279 
280 export ROOTDEV=ixgbe2
281 export FILE=xdp_vlan01_kern.o
282 
283 # Re-attach clsact to clear/flush existing role
284 tc qdisc del dev $ROOTDEV clsact 2> /dev/null ;\
285 tc qdisc add dev $ROOTDEV clsact
286 
287 # Attach BPF prog EGRESS
288 tc filter add dev $ROOTDEV egress \
289   prio 1 handle 1 bpf da obj $FILE sec tc_vlan_push
290 
291 tc filter show dev $ROOTDEV egress
292 */
293