sleepgraph - Suspend/Resume timing analysis sleepgraph [ OPTIONS ] [ COMMAND ] sleepgraph is designed to assist kernel and OS developers in optimizing their linux stack's suspend/resume time. Using a kernel image built with a few extra options enabled, the tool will execute a suspend and capture dmesg and ftrace data until resume is complete. This data is transformed into a device timeline and an optional callgraph to give a detailed view of which devices/subsystems are taking the most time in suspend/resume.

If no specific command is given, the default behavior is to initiate a suspend/resume.

Generates output files in subdirectory: suspend-yymmdd-HHMMSS html timeline : <hostname>_<mode>.html raw dmesg file : <hostname>_<mode>_dmesg.txt raw ftrace file : <hostname>_<mode>_ftrace.txt

-h Print the help text.

-v Print the current tool version.

-verbose Print extra information during execution and analysis.

-config file Pull arguments and config options from a file.

-m mode Mode to initiate for suspend e.g. standby, freeze, mem (default: mem).

-o subdir Override the output subdirectory. Use {date}, {time}, {hostname} for current values. e.g. suspend-{hostname}-{date}-{time}

-rtcwake t | off Use rtcwake to autoresume after t seconds (default: 15). Set t to "off" to disable rtcwake and require a user keypress to resume.

-addlogs Add the dmesg and ftrace logs to the html output. They will be viewable by clicking buttons in the timeline.

-cmd str Run the timeline over a custom suspend command, e.g. pm-suspend. By default the tool forces suspend via /sys/power/state so this allows testing over an OS's official suspend method. The output file will change to hostname_command.html and will autodetect which suspend mode was triggered.

-filter "d1,d2,..." Filter out all but these device callbacks. These strings can be device names or module names. e.g. 0000:00:02.0, ata5, i915, usb, etc.

-mindev t Discard all device callbacks shorter than t milliseconds (default: 0.0). This reduces the html file size as there can be many tiny callbacks which are barely visible. The value is a float: e.g. 0.001 represents 1 us.

-proc Add usermode process info into the timeline (default: disabled).

-dev Add kernel source calls and threads to the timeline (default: disabled).

-x2 Run two suspend/resumes back to back (default: disabled).

-x2delay t Include t ms delay between multiple test runs (default: 0 ms).

-predelay t Include t ms delay before 1st suspend (default: 0 ms).

-postdelay t Include t ms delay after last resume (default: 0 ms).

-multi n d Execute n consecutive tests at d seconds intervals. The outputs will be created in a new subdirectory with a summary page: suspend-xN-{date}-{time}.

-f Use ftrace to create device callgraphs (default: disabled). This can produce very large outputs, i.e. 10MB - 100MB.

-maxdepth level limit the callgraph trace depth to level (default: 0=all). This is the best way to limit the output size when using callgraphs via -f.

-expandcg pre-expand the callgraph data in the html output (default: disabled)

-fadd file Add functions to be graphed in the timeline from a list in a text file

-mincg t Discard all callgraphs shorter than t milliseconds (default: 0.0). This reduces the html file size as there can be many tiny callgraphs which are barely visible in the timeline. The value is a float: e.g. 0.001 represents 1 us.

-cgphase p Only show callgraph data for phase p (e.g. suspend_late).

-cgtest n In an x2 run, only show callgraph data for test n (e.g. 0 or 1).

-timeprec n Number of significant digits in timestamps (0:S, [3:ms], 6:us).

-ftrace file Create HTML output from an existing ftrace file.

-dmesg file Create HTML output from an existing dmesg file.

-summary indir Create a summary page of all tests in indir. Creates summary.html in the current folder. The output page is a table of tests with suspend and resume values sorted by suspend mode, host, and kernel. Includes test averages by mode and links to the test html files.

-modes List available suspend modes.

-status Test to see if the system is able to run this tool. Use this along with any options you intend to use to see if they will work.

-fpdt Print out the contents of the ACPI Firmware Performance Data Table.

-usbtopo Print out the current USB topology with power info.

-usbauto Enable autosuspend for all connected USB devices.

-flist Print the list of ftrace functions currently being captured. Functions that are not available as symbols in the current kernel are shown in red. By default, the tool traces a list of important suspend/resume functions in order to better fill out the timeline. If the user has added their own with -fadd they will also be checked.

-flistall Print all ftrace functions capable of being captured. These are all the possible values you can add to trace via the -fadd argument.

Check which suspend modes are currently supported. $ sleepgraph -modes

Read the Firmware Performance Data Table (FPDT)

$ sudo sleepgraph -fpdt

Print out the current USB power topology

$ sleepgraph -usbtopo

Verify that you can run a command with a set of arguments

$ sudo sleepgraph -f -rtcwake 30 -status

Generate a summary of all timelines in a particular folder.

$ sleepgraph -summary ~/workspace/myresults/

Re-generate the html output from a previous run's dmesg and ftrace log.

$ sleepgraph -dmesg myhost_mem_dmesg.txt -ftrace myhost_mem_ftrace.txt

Execute a mem suspend with a 15 second wakeup. Include the logs in the html. $ sudo sleepgraph -rtcwake 15 -addlogs

Execute a standby with a 15 second wakeup. Change the output folder name.

$ sudo sleepgraph -m standby -rtcwake 15 -o "standby-{hostname}-{date}-{time}"

Execute a freeze with no wakeup (require keypress). Change output folder name.

$ sudo sleepgraph -m freeze -rtcwake off -o "freeze-{hostname}-{date}-{time}"

Execute a suspend & include dev mode source calls, limit callbacks to 5ms or larger. $ sudo sleepgraph -m mem -rtcwake 15 -dev -mindev 5

Run two suspends back to back, include a 500ms delay before, after, and in between runs.

$ sudo sleepgraph -m mem -rtcwake 15 -x2 -predelay 500 -x2delay 500 -postdelay 500

Do a batch run of 10 freezes with 30 seconds delay between runs.

$ sudo sleepgraph -m freeze -rtcwake 15 -multi 10 30

Execute a suspend using a custom command.

$ sudo sleepgraph -cmd "echo mem > /sys/power/state" -rtcwake 15

Add device callgraphs. Limit the trace depth and only show callgraphs 10ms or larger. $ sudo sleepgraph -m mem -rtcwake 15 -f -maxdepth 5 -mincg 10

Capture a full callgraph across all suspend, then filter the html by a single phase.

$ sudo sleepgraph -m mem -rtcwake 15 -f $ sleepgraph -dmesg host_mem_dmesg.txt -ftrace host_mem_ftrace.txt -f -cgphase resume

dmesg(1)

Written by Todd Brandt <todd.e.brandt@linux.intel.com>