Sets a register on supported Intel processore which allows software to convey its policy for the relative importance of performance versus energy savings to the processor. The range of valid numbers is 0-15, where 0 is maximum performance and 15 is maximum energy efficiency. The processor uses this information in model-specific ways when it must select trade-offs between performance and energy efficiency. This policy hint does not supersede Processor Performance states (P-states) or CPU Idle power states (C-states), but allows software to have influence where it would otherwise be unable to express a preference. For example, this setting may tell the hardware how aggressively or conservatively to control frequency in the "turbo range" above the explicitly OS-controlled P-state frequency range. It may also tell the hardware how aggressively it should enter the OS requested C-states. This option can be applied to individual cores only via the --cpu option, cpupower(1). Setting the performance bias value on one CPU can modify the setting on related CPUs as well (for example all CPUs on one socket), because of hardware restrictions. Use cpupower -c all info -b to verify. This options needs the msr kernel driver (CONFIG_X86_MSR) loaded.

Sets the energy performance policy preference on supported Intel or AMD processors which use the Intel or AMD P-State cpufreq driver respectively. Available policies can be found with cat /sys/devices/system/cpu/cpufreq/policy0/energy_performance_available_preferences :

Sets the AMD P-State mode for supported AMD processors. Available modes are "active", "guided" or "passive". Refer to the AMD P-State kernel documentation for further information.

This option is used to enable or disable the turbo boost feature on supported Intel and AMD processors. This option takes as parameter either 1 to enable, or 0 to disable the feature.