xref: /linux/tools/perf/pmu-events/arch/powerpc/power8/pipeline.json (revision 0526b56cbc3c489642bd6a5fe4b718dea7ef0ee8) 
1[
2  {
3    "EventCode": "0x100f2",
4    "EventName": "PM_1PLUS_PPC_CMPL",
5    "BriefDescription": "1 or more ppc insts finished",
6    "PublicDescription": "1 or more ppc insts finished (completed)"
7  },
8  {
9    "EventCode": "0x400f2",
10    "EventName": "PM_1PLUS_PPC_DISP",
11    "BriefDescription": "Cycles at least one Instr Dispatched",
12    "PublicDescription": "Cycles at least one Instr Dispatched. Could be a group with only microcode. Issue HW016521"
13  },
14  {
15    "EventCode": "0x100fa",
16    "EventName": "PM_ANY_THRD_RUN_CYC",
17    "BriefDescription": "One of threads in run_cycles",
18    "PublicDescription": "Any thread in run_cycles (was one thread in run_cycles)"
19  },
20  {
21    "EventCode": "0x4000a",
22    "EventName": "PM_CMPLU_STALL",
23    "BriefDescription": "Completion stall",
24    "PublicDescription": ""
25  },
26  {
27    "EventCode": "0x4d018",
28    "EventName": "PM_CMPLU_STALL_BRU",
29    "BriefDescription": "Completion stall due to a Branch Unit",
30    "PublicDescription": ""
31  },
32  {
33    "EventCode": "0x2c012",
34    "EventName": "PM_CMPLU_STALL_DCACHE_MISS",
35    "BriefDescription": "Completion stall by Dcache miss",
36    "PublicDescription": ""
37  },
38  {
39    "EventCode": "0x2c018",
40    "EventName": "PM_CMPLU_STALL_DMISS_L21_L31",
41    "BriefDescription": "Completion stall by Dcache miss which resolved on chip ( excluding local L2/L3)",
42    "PublicDescription": ""
43  },
44  {
45    "EventCode": "0x2c016",
46    "EventName": "PM_CMPLU_STALL_DMISS_L2L3",
47    "BriefDescription": "Completion stall by Dcache miss which resolved in L2/L3",
48    "PublicDescription": ""
49  },
50  {
51    "EventCode": "0x4c016",
52    "EventName": "PM_CMPLU_STALL_DMISS_L2L3_CONFLICT",
53    "BriefDescription": "Completion stall due to cache miss that resolves in the L2 or L3 with a conflict",
54    "PublicDescription": "Completion stall due to cache miss resolving in core's L2/L3 with a conflict"
55  },
56  {
57    "EventCode": "0x4c01a",
58    "EventName": "PM_CMPLU_STALL_DMISS_L3MISS",
59    "BriefDescription": "Completion stall due to cache miss resolving missed the L3",
60    "PublicDescription": ""
61  },
62  {
63    "EventCode": "0x4c018",
64    "EventName": "PM_CMPLU_STALL_DMISS_LMEM",
65    "BriefDescription": "Completion stall due to cache miss that resolves in local memory",
66    "PublicDescription": "Completion stall due to cache miss resolving in core's Local Memory"
67  },
68  {
69    "EventCode": "0x2c01c",
70    "EventName": "PM_CMPLU_STALL_DMISS_REMOTE",
71    "BriefDescription": "Completion stall by Dcache miss which resolved from remote chip (cache or memory)",
72    "PublicDescription": "Completion stall by Dcache miss which resolved on chip ( excluding local L2/L3)"
73  },
74  {
75    "EventCode": "0x4c012",
76    "EventName": "PM_CMPLU_STALL_ERAT_MISS",
77    "BriefDescription": "Completion stall due to LSU reject ERAT miss",
78    "PublicDescription": ""
79  },
80  {
81    "EventCode": "0x4d016",
82    "EventName": "PM_CMPLU_STALL_FXLONG",
83    "BriefDescription": "Completion stall due to a long latency fixed point instruction",
84    "PublicDescription": ""
85  },
86  {
87    "EventCode": "0x2d016",
88    "EventName": "PM_CMPLU_STALL_FXU",
89    "BriefDescription": "Completion stall due to FXU",
90    "PublicDescription": ""
91  },
92  {
93    "EventCode": "0x30036",
94    "EventName": "PM_CMPLU_STALL_HWSYNC",
95    "BriefDescription": "completion stall due to hwsync",
96    "PublicDescription": ""
97  },
98  {
99    "EventCode": "0x4d014",
100    "EventName": "PM_CMPLU_STALL_LOAD_FINISH",
101    "BriefDescription": "Completion stall due to a Load finish",
102    "PublicDescription": ""
103  },
104  {
105    "EventCode": "0x2c010",
106    "EventName": "PM_CMPLU_STALL_LSU",
107    "BriefDescription": "Completion stall by LSU instruction",
108    "PublicDescription": ""
109  },
110  {
111    "EventCode": "0x10036",
112    "EventName": "PM_CMPLU_STALL_LWSYNC",
113    "BriefDescription": "completion stall due to isync/lwsync",
114    "PublicDescription": ""
115  },
116  {
117    "EventCode": "0x30006",
118    "EventName": "PM_CMPLU_STALL_OTHER_CMPL",
119    "BriefDescription": "Instructions core completed while this tread was stalled",
120    "PublicDescription": "Instructions core completed while this thread was stalled"
121  },
122  {
123    "EventCode": "0x4c01c",
124    "EventName": "PM_CMPLU_STALL_ST_FWD",
125    "BriefDescription": "Completion stall due to store forward",
126    "PublicDescription": ""
127  },
128  {
129    "EventCode": "0x1001c",
130    "EventName": "PM_CMPLU_STALL_THRD",
131    "BriefDescription": "Completion Stalled due to thread conflict. Group ready to complete but it was another thread's turn",
132    "PublicDescription": "Completion stall due to thread conflict"
133  },
134  {
135    "EventCode": "0x1e",
136    "EventName": "PM_CYC",
137    "BriefDescription": "Cycles",
138    "PublicDescription": ""
139  },
140  {
141    "EventCode": "0x10006",
142    "EventName": "PM_DISP_HELD",
143    "BriefDescription": "Dispatch Held",
144    "PublicDescription": ""
145  },
146  {
147    "EventCode": "0x4003c",
148    "EventName": "PM_DISP_HELD_SYNC_HOLD",
149    "BriefDescription": "Dispatch held due to SYNC hold",
150    "PublicDescription": ""
151  },
152  {
153    "EventCode": "0x200f8",
154    "EventName": "PM_EXT_INT",
155    "BriefDescription": "external interrupt",
156    "PublicDescription": ""
157  },
158  {
159    "EventCode": "0x400f8",
160    "EventName": "PM_FLUSH",
161    "BriefDescription": "Flush (any type)",
162    "PublicDescription": ""
163  },
164  {
165    "EventCode": "0x30012",
166    "EventName": "PM_FLUSH_COMPLETION",
167    "BriefDescription": "Completion Flush",
168    "PublicDescription": ""
169  },
170  {
171    "EventCode": "0x3000c",
172    "EventName": "PM_FREQ_DOWN",
173    "BriefDescription": "Power Management: Below Threshold B",
174    "PublicDescription": "Frequency is being slewed down due to Power Management"
175  },
176  {
177    "EventCode": "0x4000c",
178    "EventName": "PM_FREQ_UP",
179    "BriefDescription": "Power Management: Above Threshold A",
180    "PublicDescription": "Frequency is being slewed up due to Power Management"
181  },
182  {
183    "EventCode": "0x2000a",
184    "EventName": "PM_HV_CYC",
185    "BriefDescription": "Cycles in which msr_hv is high. Note that this event does not take msr_pr into consideration",
186    "PublicDescription": "cycles in hypervisor mode"
187  },
188  {
189    "EventCode": "0x3405e",
190    "EventName": "PM_IFETCH_THROTTLE",
191    "BriefDescription": "Cycles in which Instruction fetch throttle was active",
192    "PublicDescription": "Cycles instruction fecth was throttled in IFU"
193  },
194  {
195    "EventCode": "0x10014",
196    "EventName": "PM_IOPS_CMPL",
197    "BriefDescription": "Internal Operations completed",
198    "PublicDescription": "IOPS Completed"
199  },
200  {
201    "EventCode": "0x3c058",
202    "EventName": "PM_LARX_FIN",
203    "BriefDescription": "Larx finished",
204    "PublicDescription": ""
205  },
206  {
207    "EventCode": "0x1002e",
208    "EventName": "PM_LD_CMPL",
209    "BriefDescription": "count of Loads completed",
210    "PublicDescription": ""
211  },
212  {
213    "EventCode": "0x10062",
214    "EventName": "PM_LD_L3MISS_PEND_CYC",
215    "BriefDescription": "Cycles L3 miss was pending for this thread",
216    "PublicDescription": ""
217  },
218  {
219    "EventCode": "0x30066",
220    "EventName": "PM_LSU_FIN",
221    "BriefDescription": "LSU Finished an instruction (up to 2 per cycle)",
222    "PublicDescription": ""
223  },
224  {
225    "EventCode": "0x2003e",
226    "EventName": "PM_LSU_LMQ_SRQ_EMPTY_CYC",
227    "BriefDescription": "LSU empty (lmq and srq empty)",
228    "PublicDescription": ""
229  },
230  {
231    "EventCode": "0x2e05c",
232    "EventName": "PM_LSU_REJECT_ERAT_MISS",
233    "BriefDescription": "LSU Reject due to ERAT (up to 4 per cycles)",
234    "PublicDescription": ""
235  },
236  {
237    "EventCode": "0x4e05c",
238    "EventName": "PM_LSU_REJECT_LHS",
239    "BriefDescription": "LSU Reject due to LHS (up to 4 per cycle)",
240    "PublicDescription": ""
241  },
242  {
243    "EventCode": "0x1e05c",
244    "EventName": "PM_LSU_REJECT_LMQ_FULL",
245    "BriefDescription": "LSU reject due to LMQ full ( 4 per cycle)",
246    "PublicDescription": ""
247  },
248  {
249    "EventCode": "0x1001a",
250    "EventName": "PM_LSU_SRQ_FULL_CYC",
251    "BriefDescription": "Storage Queue is full and is blocking dispatch",
252    "PublicDescription": "SRQ is Full"
253  },
254  {
255    "EventCode": "0x40014",
256    "EventName": "PM_PROBE_NOP_DISP",
257    "BriefDescription": "ProbeNops dispatched",
258    "PublicDescription": ""
259  },
260  {
261    "EventCode": "0x600f4",
262    "EventName": "PM_RUN_CYC",
263    "BriefDescription": "Run_cycles",
264    "PublicDescription": ""
265  },
266  {
267    "EventCode": "0x3006c",
268    "EventName": "PM_RUN_CYC_SMT2_MODE",
269    "BriefDescription": "Cycles run latch is set and core is in SMT2 mode",
270    "PublicDescription": ""
271  },
272  {
273    "EventCode": "0x2006c",
274    "EventName": "PM_RUN_CYC_SMT4_MODE",
275    "BriefDescription": "cycles this threads run latch is set and the core is in SMT4 mode",
276    "PublicDescription": "Cycles run latch is set and core is in SMT4 mode"
277  },
278  {
279    "EventCode": "0x1006c",
280    "EventName": "PM_RUN_CYC_ST_MODE",
281    "BriefDescription": "Cycles run latch is set and core is in ST mode",
282    "PublicDescription": ""
283  },
284  {
285    "EventCode": "0x500fa",
286    "EventName": "PM_RUN_INST_CMPL",
287    "BriefDescription": "Run_Instructions",
288    "PublicDescription": ""
289  },
290  {
291    "EventCode": "0x1e058",
292    "EventName": "PM_STCX_FAIL",
293    "BriefDescription": "stcx failed",
294    "PublicDescription": ""
295  },
296  {
297    "EventCode": "0x20016",
298    "EventName": "PM_ST_CMPL",
299    "BriefDescription": "Store completion count",
300    "PublicDescription": ""
301  },
302  {
303    "EventCode": "0x200f0",
304    "EventName": "PM_ST_FIN",
305    "BriefDescription": "Store Instructions Finished",
306    "PublicDescription": "Store Instructions Finished (store sent to nest)"
307  },
308  {
309    "EventCode": "0x20018",
310    "EventName": "PM_ST_FWD",
311    "BriefDescription": "Store forwards that finished",
312    "PublicDescription": ""
313  },
314  {
315    "EventCode": "0x10026",
316    "EventName": "PM_TABLEWALK_CYC",
317    "BriefDescription": "Cycles when a tablewalk (I or D) is active",
318    "PublicDescription": "Tablewalk Active"
319  },
320  {
321    "EventCode": "0x300f8",
322    "EventName": "PM_TB_BIT_TRANS",
323    "BriefDescription": "timebase event",
324    "PublicDescription": ""
325  },
326  {
327    "EventCode": "0x2000c",
328    "EventName": "PM_THRD_ALL_RUN_CYC",
329    "BriefDescription": "All Threads in Run_cycles (was both threads in run_cycles)",
330    "PublicDescription": ""
331  },
332  {
333    "EventCode": "0x30058",
334    "EventName": "PM_TLBIE_FIN",
335    "BriefDescription": "tlbie finished",
336    "PublicDescription": ""
337  },
338  {
339    "EventCode": "0x10060",
340    "EventName": "PM_TM_TRANS_RUN_CYC",
341    "BriefDescription": "run cycles in transactional state",
342    "PublicDescription": ""
343  },
344  {
345    "EventCode": "0x2e012",
346    "EventName": "PM_TM_TX_PASS_RUN_CYC",
347    "BriefDescription": "cycles spent in successful transactions",
348    "PublicDescription": "run cycles spent in successful transactions"
349  }
350]
351