xref: /linux/tools/perf/Makefile.config (revision d7b4e3287ca3a7baf66efd9158498e551a9550da)
1# SPDX-License-Identifier: GPL-2.0-only
2
3ifeq ($(src-perf),)
4src-perf := $(srctree)/tools/perf
5endif
6
7ifeq ($(obj-perf),)
8obj-perf := $(OUTPUT)
9endif
10
11ifneq ($(obj-perf),)
12obj-perf := $(abspath $(obj-perf))/
13endif
14
15$(shell printf "" > $(OUTPUT).config-detected)
16detected     = $(shell echo "$(1)=y"       >> $(OUTPUT).config-detected)
17detected_var = $(shell echo "$(1)=$($(1))" >> $(OUTPUT).config-detected)
18
19CFLAGS := $(EXTRA_CFLAGS) $(filter-out -Wnested-externs,$(EXTRA_WARNINGS))
20HOSTCFLAGS := $(filter-out -Wnested-externs,$(EXTRA_WARNINGS))
21
22# Enabled Wthread-safety analysis for clang builds.
23ifeq ($(CC_NO_CLANG), 0)
24  CFLAGS += -Wthread-safety
25endif
26
27include $(srctree)/tools/scripts/Makefile.arch
28
29$(call detected_var,SRCARCH)
30
31NO_PERF_REGS := 1
32
33ifneq ($(NO_SYSCALL_TABLE),1)
34  NO_SYSCALL_TABLE := 1
35
36  ifeq ($(SRCARCH),x86)
37    ifeq (${IS_64_BIT}, 1)
38      NO_SYSCALL_TABLE := 0
39    endif
40  else
41    ifeq ($(SRCARCH),$(filter $(SRCARCH),powerpc arm64 s390 mips loongarch))
42      NO_SYSCALL_TABLE := 0
43    endif
44  endif
45
46  ifneq ($(NO_SYSCALL_TABLE),1)
47    CFLAGS += -DHAVE_SYSCALL_TABLE_SUPPORT
48  endif
49endif
50
51# Additional ARCH settings for ppc
52ifeq ($(SRCARCH),powerpc)
53  NO_PERF_REGS := 0
54  CFLAGS += -I$(OUTPUT)arch/powerpc/include/generated
55  LIBUNWIND_LIBS := -lunwind -lunwind-ppc64
56endif
57
58# Additional ARCH settings for x86
59ifeq ($(SRCARCH),x86)
60  $(call detected,CONFIG_X86)
61  ifeq (${IS_64_BIT}, 1)
62    CFLAGS += -DHAVE_ARCH_X86_64_SUPPORT -I$(OUTPUT)arch/x86/include/generated
63    ARCH_INCLUDE = ../../arch/x86/lib/memcpy_64.S ../../arch/x86/lib/memset_64.S
64    LIBUNWIND_LIBS = -lunwind-x86_64 -lunwind -llzma
65    $(call detected,CONFIG_X86_64)
66  else
67    LIBUNWIND_LIBS = -lunwind-x86 -llzma -lunwind
68  endif
69  NO_PERF_REGS := 0
70endif
71
72ifeq ($(SRCARCH),arm)
73  NO_PERF_REGS := 0
74  LIBUNWIND_LIBS = -lunwind -lunwind-arm
75endif
76
77ifeq ($(SRCARCH),arm64)
78  NO_PERF_REGS := 0
79  CFLAGS += -I$(OUTPUT)arch/arm64/include/generated
80  LIBUNWIND_LIBS = -lunwind -lunwind-aarch64
81endif
82
83ifeq ($(SRCARCH),loongarch)
84  NO_PERF_REGS := 0
85  CFLAGS += -I$(OUTPUT)arch/loongarch/include/generated
86  LIBUNWIND_LIBS = -lunwind -lunwind-loongarch64
87endif
88
89ifeq ($(SRCARCH),riscv)
90  NO_PERF_REGS := 0
91endif
92
93ifeq ($(SRCARCH),csky)
94  NO_PERF_REGS := 0
95endif
96
97ifeq ($(ARCH),s390)
98  NO_PERF_REGS := 0
99  CFLAGS += -fPIC -I$(OUTPUT)arch/s390/include/generated
100endif
101
102ifeq ($(ARCH),mips)
103  NO_PERF_REGS := 0
104  CFLAGS += -I$(OUTPUT)arch/mips/include/generated
105  LIBUNWIND_LIBS = -lunwind -lunwind-mips
106endif
107
108ifeq ($(NO_PERF_REGS),0)
109  $(call detected,CONFIG_PERF_REGS)
110endif
111
112# So far there's only x86 and arm libdw unwind support merged in perf.
113# Disable it on all other architectures in case libdw unwind
114# support is detected in system. Add supported architectures
115# to the check.
116ifneq ($(SRCARCH),$(filter $(SRCARCH),x86 arm arm64 powerpc s390 csky riscv loongarch))
117  NO_LIBDW_DWARF_UNWIND := 1
118endif
119
120ifeq ($(LIBUNWIND_LIBS),)
121  NO_LIBUNWIND := 1
122endif
123#
124# For linking with debug library, run like:
125#
126#   make DEBUG=1 LIBUNWIND_DIR=/opt/libunwind/
127#
128
129libunwind_arch_set_flags = $(eval $(libunwind_arch_set_flags_code))
130define libunwind_arch_set_flags_code
131  FEATURE_CHECK_CFLAGS-libunwind-$(1)  = -I$(LIBUNWIND_DIR)/include
132  FEATURE_CHECK_LDFLAGS-libunwind-$(1) = -L$(LIBUNWIND_DIR)/lib
133endef
134
135ifdef LIBUNWIND_DIR
136  LIBUNWIND_CFLAGS  = -I$(LIBUNWIND_DIR)/include
137  LIBUNWIND_LDFLAGS = -L$(LIBUNWIND_DIR)/lib
138  LIBUNWIND_ARCHS = x86 x86_64 arm aarch64 debug-frame-arm debug-frame-aarch64 loongarch
139  $(foreach libunwind_arch,$(LIBUNWIND_ARCHS),$(call libunwind_arch_set_flags,$(libunwind_arch)))
140endif
141
142# Set per-feature check compilation flags
143FEATURE_CHECK_CFLAGS-libunwind = $(LIBUNWIND_CFLAGS)
144FEATURE_CHECK_LDFLAGS-libunwind = $(LIBUNWIND_LDFLAGS) $(LIBUNWIND_LIBS)
145FEATURE_CHECK_CFLAGS-libunwind-debug-frame = $(LIBUNWIND_CFLAGS)
146FEATURE_CHECK_LDFLAGS-libunwind-debug-frame = $(LIBUNWIND_LDFLAGS) $(LIBUNWIND_LIBS)
147
148FEATURE_CHECK_LDFLAGS-libunwind-arm += -lunwind -lunwind-arm
149FEATURE_CHECK_LDFLAGS-libunwind-aarch64 += -lunwind -lunwind-aarch64
150FEATURE_CHECK_LDFLAGS-libunwind-x86 += -lunwind -llzma -lunwind-x86
151FEATURE_CHECK_LDFLAGS-libunwind-x86_64 += -lunwind -llzma -lunwind-x86_64
152
153FEATURE_CHECK_LDFLAGS-libcrypto = -lcrypto
154
155ifdef CSINCLUDES
156  LIBOPENCSD_CFLAGS := -I$(CSINCLUDES)
157endif
158OPENCSDLIBS := -lopencsd_c_api -lopencsd
159ifeq ($(findstring -static,${LDFLAGS}),-static)
160  OPENCSDLIBS += -lstdc++
161endif
162ifdef CSLIBS
163  LIBOPENCSD_LDFLAGS := -L$(CSLIBS)
164endif
165FEATURE_CHECK_CFLAGS-libopencsd := $(LIBOPENCSD_CFLAGS)
166FEATURE_CHECK_LDFLAGS-libopencsd := $(LIBOPENCSD_LDFLAGS) $(OPENCSDLIBS)
167
168ifeq ($(NO_PERF_REGS),0)
169  CFLAGS += -DHAVE_PERF_REGS_SUPPORT
170endif
171
172# for linking with debug library, run like:
173# make DEBUG=1 LIBDW_DIR=/opt/libdw/
174ifdef LIBDW_DIR
175  LIBDW_CFLAGS  := -I$(LIBDW_DIR)/include
176  LIBDW_LDFLAGS := -L$(LIBDW_DIR)/lib
177endif
178DWARFLIBS := -ldw
179ifeq ($(findstring -static,${LDFLAGS}),-static)
180  DWARFLIBS += -lelf -lebl -ldl -lz -llzma -lbz2
181endif
182FEATURE_CHECK_CFLAGS-libdw-dwarf-unwind := $(LIBDW_CFLAGS)
183FEATURE_CHECK_LDFLAGS-libdw-dwarf-unwind := $(LIBDW_LDFLAGS) $(DWARFLIBS)
184
185# for linking with debug library, run like:
186# make DEBUG=1 LIBBABELTRACE_DIR=/opt/libbabeltrace/
187ifdef LIBBABELTRACE_DIR
188  LIBBABELTRACE_CFLAGS  := -I$(LIBBABELTRACE_DIR)/include
189  LIBBABELTRACE_LDFLAGS := -L$(LIBBABELTRACE_DIR)/lib
190endif
191FEATURE_CHECK_CFLAGS-libbabeltrace := $(LIBBABELTRACE_CFLAGS)
192FEATURE_CHECK_LDFLAGS-libbabeltrace := $(LIBBABELTRACE_LDFLAGS) -lbabeltrace-ctf
193
194ifdef LIBZSTD_DIR
195  LIBZSTD_CFLAGS  := -I$(LIBZSTD_DIR)/lib
196  LIBZSTD_LDFLAGS := -L$(LIBZSTD_DIR)/lib
197endif
198FEATURE_CHECK_CFLAGS-libzstd := $(LIBZSTD_CFLAGS)
199FEATURE_CHECK_LDFLAGS-libzstd := $(LIBZSTD_LDFLAGS)
200
201FEATURE_CHECK_CFLAGS-bpf = -I. -I$(srctree)/tools/include -I$(srctree)/tools/arch/$(SRCARCH)/include/uapi -I$(srctree)/tools/include/uapi
202# include ARCH specific config
203-include $(src-perf)/arch/$(SRCARCH)/Makefile
204
205ifdef PERF_HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET
206  CFLAGS += -DHAVE_ARCH_REGS_QUERY_REGISTER_OFFSET
207endif
208
209include $(srctree)/tools/scripts/utilities.mak
210
211ifeq ($(call get-executable,$(FLEX)),)
212  dummy := $(error Error: $(FLEX) is missing on this system, please install it)
213endif
214
215ifeq ($(call get-executable,$(BISON)),)
216  dummy := $(error Error: $(BISON) is missing on this system, please install it)
217endif
218
219ifneq ($(OUTPUT),)
220  ifeq ($(shell expr $(shell $(BISON) --version | grep bison | sed -e 's/.\+ \([0-9]\+\).\([0-9]\+\).\([0-9]\+\)/\1\2\3/g') \>\= 371), 1)
221    BISON_FILE_PREFIX_MAP := --file-prefix-map=$(OUTPUT)=
222  endif
223endif
224
225# Treat warnings as errors unless directed not to
226ifneq ($(WERROR),0)
227  CORE_CFLAGS += -Werror
228  CXXFLAGS += -Werror
229  HOSTCFLAGS += -Werror
230endif
231
232ifndef DEBUG
233  DEBUG := 0
234endif
235
236ifeq ($(DEBUG),0)
237CORE_CFLAGS += -DNDEBUG=1
238ifeq ($(CC_NO_CLANG), 0)
239  CORE_CFLAGS += -O3
240else
241  CORE_CFLAGS += -O6
242endif
243else
244  CORE_CFLAGS += -g
245  CXXFLAGS += -g
246endif
247
248ifdef PARSER_DEBUG
249  PARSER_DEBUG_BISON := -t
250  PARSER_DEBUG_FLEX  := -d
251  CFLAGS             += -DPARSER_DEBUG
252  $(call detected_var,PARSER_DEBUG_BISON)
253  $(call detected_var,PARSER_DEBUG_FLEX)
254endif
255
256ifdef LTO
257  CORE_CFLAGS += -flto
258  CXXFLAGS += -flto
259endif
260
261# Try different combinations to accommodate systems that only have
262# python[2][3]-config in weird combinations in the following order of
263# priority from lowest to highest:
264#   * python2-config as per pep-0394.
265#   * python-config
266#   * python3-config
267#   * $(PYTHON)-config (If PYTHON is user supplied but PYTHON_CONFIG isn't)
268#
269PYTHON_AUTO := python-config
270PYTHON_AUTO := $(if $(call get-executable,python2-config),python2-config,$(PYTHON_AUTO))
271PYTHON_AUTO := $(if $(call get-executable,python-config),python-config,$(PYTHON_AUTO))
272PYTHON_AUTO := $(if $(call get-executable,python3-config),python3-config,$(PYTHON_AUTO))
273
274# If PYTHON is defined but PYTHON_CONFIG isn't, then take $(PYTHON)-config as if it was the user
275# supplied value for PYTHON_CONFIG. Because it's "user supplied", error out if it doesn't exist.
276ifdef PYTHON
277  ifndef PYTHON_CONFIG
278    PYTHON_CONFIG_AUTO := $(call get-executable,$(PYTHON)-config)
279    PYTHON_CONFIG := $(if $(PYTHON_CONFIG_AUTO),$(PYTHON_CONFIG_AUTO),\
280                          $(call $(error $(PYTHON)-config not found)))
281  endif
282endif
283
284# Select either auto detected python and python-config or use user supplied values if they are
285# defined. get-executable-or-default fails with an error if the first argument is supplied but
286# doesn't exist.
287override PYTHON_CONFIG := $(call get-executable-or-default,PYTHON_CONFIG,$(PYTHON_AUTO))
288override PYTHON := $(call get-executable-or-default,PYTHON,$(subst -config,,$(PYTHON_CONFIG)))
289
290grep-libs  = $(filter -l%,$(1))
291strip-libs  = $(filter-out -l%,$(1))
292
293PYTHON_CONFIG_SQ := $(call shell-sq,$(PYTHON_CONFIG))
294
295# Python 3.8 changed the output of `python-config --ldflags` to not include the
296# '-lpythonX.Y' flag unless '--embed' is also passed. The feature check for
297# libpython fails if that flag is not included in LDFLAGS
298ifeq ($(shell $(PYTHON_CONFIG_SQ) --ldflags --embed 2>&1 1>/dev/null; echo $$?), 0)
299  PYTHON_CONFIG_LDFLAGS := --ldflags --embed
300else
301  PYTHON_CONFIG_LDFLAGS := --ldflags
302endif
303
304ifdef PYTHON_CONFIG
305  PYTHON_EMBED_LDOPTS := $(shell $(PYTHON_CONFIG_SQ) $(PYTHON_CONFIG_LDFLAGS) 2>/dev/null)
306  PYTHON_EMBED_LDFLAGS := $(call strip-libs,$(PYTHON_EMBED_LDOPTS))
307  PYTHON_EMBED_LIBADD := $(call grep-libs,$(PYTHON_EMBED_LDOPTS)) -lutil
308  PYTHON_EMBED_CCOPTS := $(shell $(PYTHON_CONFIG_SQ) --includes 2>/dev/null)
309  FLAGS_PYTHON_EMBED := $(PYTHON_EMBED_CCOPTS) $(PYTHON_EMBED_LDOPTS)
310  ifeq ($(CC_NO_CLANG), 0)
311    PYTHON_EMBED_CCOPTS := $(filter-out -ffat-lto-objects, $(PYTHON_EMBED_CCOPTS))
312  endif
313endif
314
315FEATURE_CHECK_CFLAGS-libpython := $(PYTHON_EMBED_CCOPTS)
316FEATURE_CHECK_LDFLAGS-libpython := $(PYTHON_EMBED_LDOPTS)
317
318FEATURE_CHECK_LDFLAGS-libaio = -lrt
319
320FEATURE_CHECK_LDFLAGS-disassembler-four-args = -lbfd -lopcodes -ldl
321FEATURE_CHECK_LDFLAGS-disassembler-init-styled = -lbfd -lopcodes -ldl
322
323CORE_CFLAGS += -fno-omit-frame-pointer
324CORE_CFLAGS += -Wall
325CORE_CFLAGS += -Wextra
326CORE_CFLAGS += -std=gnu11
327
328CXXFLAGS += -std=gnu++17 -fno-exceptions -fno-rtti
329CXXFLAGS += -Wall
330CXXFLAGS += -Wextra
331CXXFLAGS += -fno-omit-frame-pointer
332
333HOSTCFLAGS += -Wall
334HOSTCFLAGS += -Wextra
335
336# Enforce a non-executable stack, as we may regress (again) in the future by
337# adding assembler files missing the .GNU-stack linker note.
338LDFLAGS += -Wl,-z,noexecstack
339
340EXTLIBS = -lpthread -lrt -lm -ldl
341
342ifneq ($(TCMALLOC),)
343  CFLAGS += -fno-builtin-malloc -fno-builtin-calloc -fno-builtin-realloc -fno-builtin-free
344  EXTLIBS += -ltcmalloc
345endif
346
347ifeq ($(FEATURES_DUMP),)
348# We will display at the end of this Makefile.config, using $(call feature_display_entries)
349# As we may retry some feature detection here, see the disassembler-four-args case, for instance
350  FEATURE_DISPLAY_DEFERRED := 1
351include $(srctree)/tools/build/Makefile.feature
352else
353include $(FEATURES_DUMP)
354endif
355
356ifeq ($(feature-stackprotector-all), 1)
357  CORE_CFLAGS += -fstack-protector-all
358endif
359
360ifeq ($(DEBUG),0)
361  ifeq ($(feature-fortify-source), 1)
362    CORE_CFLAGS += -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2
363  endif
364endif
365
366INC_FLAGS += -I$(src-perf)/util/include
367INC_FLAGS += -I$(src-perf)/arch/$(SRCARCH)/include
368INC_FLAGS += -I$(srctree)/tools/include/
369INC_FLAGS += -I$(srctree)/tools/arch/$(SRCARCH)/include/uapi
370INC_FLAGS += -I$(srctree)/tools/include/uapi
371INC_FLAGS += -I$(srctree)/tools/arch/$(SRCARCH)/include/
372INC_FLAGS += -I$(srctree)/tools/arch/$(SRCARCH)/
373
374# $(obj-perf)      for generated common-cmds.h
375# $(obj-perf)/util for generated bison/flex headers
376ifneq ($(OUTPUT),)
377INC_FLAGS += -I$(obj-perf)/util
378INC_FLAGS += -I$(obj-perf)
379endif
380
381INC_FLAGS += -I$(src-perf)/util
382INC_FLAGS += -I$(src-perf)
383
384CORE_CFLAGS += -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE
385
386CFLAGS   += $(CORE_CFLAGS) $(INC_FLAGS)
387CXXFLAGS += $(INC_FLAGS)
388
389LIBPERF_CFLAGS := $(CORE_CFLAGS) $(EXTRA_CFLAGS)
390
391ifeq ($(feature-pthread-attr-setaffinity-np), 1)
392  CFLAGS += -DHAVE_PTHREAD_ATTR_SETAFFINITY_NP
393endif
394
395ifeq ($(feature-pthread-barrier), 1)
396  CFLAGS += -DHAVE_PTHREAD_BARRIER
397endif
398
399ifndef NO_BIONIC
400  $(call feature_check,bionic)
401  ifeq ($(feature-bionic), 1)
402    BIONIC := 1
403    CFLAGS += -DLACKS_SIGQUEUE_PROTOTYPE
404    CFLAGS += -DLACKS_OPEN_MEMSTREAM_PROTOTYPE
405    EXTLIBS := $(filter-out -lrt,$(EXTLIBS))
406    EXTLIBS := $(filter-out -lpthread,$(EXTLIBS))
407  endif
408endif
409
410ifeq ($(feature-eventfd), 1)
411  CFLAGS += -DHAVE_EVENTFD_SUPPORT
412endif
413
414ifeq ($(feature-get_current_dir_name), 1)
415  CFLAGS += -DHAVE_GET_CURRENT_DIR_NAME
416endif
417
418ifeq ($(feature-gettid), 1)
419  CFLAGS += -DHAVE_GETTID
420endif
421
422ifeq ($(feature-file-handle), 1)
423  CFLAGS += -DHAVE_FILE_HANDLE
424endif
425
426ifdef NO_LIBELF
427  NO_DWARF := 1
428  NO_LIBUNWIND := 1
429  NO_LIBDW_DWARF_UNWIND := 1
430  NO_LIBBPF := 1
431  NO_JVMTI := 1
432else
433  ifeq ($(feature-libelf), 0)
434    ifeq ($(feature-glibc), 1)
435      LIBC_SUPPORT := 1
436    endif
437    ifeq ($(BIONIC),1)
438      LIBC_SUPPORT := 1
439    endif
440    ifeq ($(LIBC_SUPPORT),1)
441      msg := $(error ERROR: No libelf found. Disables 'probe' tool, jvmti and BPF support. Please install libelf-dev, libelf-devel, elfutils-libelf-devel or build with NO_LIBELF=1.)
442    else
443      ifneq ($(filter s% -fsanitize=address%,$(EXTRA_CFLAGS),),)
444        ifneq ($(shell ldconfig -p | grep libasan >/dev/null 2>&1; echo $$?), 0)
445          msg := $(error No libasan found, please install libasan);
446        endif
447      endif
448
449      ifneq ($(filter s% -fsanitize=undefined%,$(EXTRA_CFLAGS),),)
450        ifneq ($(shell ldconfig -p | grep libubsan >/dev/null 2>&1; echo $$?), 0)
451          msg := $(error No libubsan found, please install libubsan);
452        endif
453      endif
454
455      ifneq ($(filter s% -static%,$(LDFLAGS),),)
456        msg := $(error No static glibc found, please install glibc-static);
457      else
458        msg := $(error No gnu/libc-version.h found, please install glibc-dev[el]);
459      endif
460    endif
461  else
462    ifndef NO_LIBDW_DWARF_UNWIND
463      ifneq ($(feature-libdw-dwarf-unwind),1)
464        NO_LIBDW_DWARF_UNWIND := 1
465        msg := $(warning No libdw DWARF unwind found, Please install elfutils-devel/libdw-dev >= 0.158 and/or set LIBDW_DIR);
466      endif
467    endif
468    ifneq ($(feature-dwarf), 1)
469      ifndef NO_DWARF
470        msg := $(warning No libdw.h found or old libdw.h found or elfutils is older than 0.138, disables dwarf support. Please install new elfutils-devel/libdw-dev);
471        NO_DWARF := 1
472      endif
473    else
474      ifneq ($(feature-dwarf_getlocations), 1)
475        msg := $(warning Old libdw.h, finding variables at given 'perf probe' point will not work, install elfutils-devel/libdw-dev >= 0.157);
476      else
477        CFLAGS += -DHAVE_DWARF_GETLOCATIONS_SUPPORT
478      endif # dwarf_getlocations
479      ifneq ($(feature-dwarf_getcfi), 1)
480        msg := $(warning Old libdw.h, finding variables at given 'perf probe' point will not work, install elfutils-devel/libdw-dev >= 0.142);
481      else
482        CFLAGS += -DHAVE_DWARF_CFI_SUPPORT
483      endif # dwarf_getcfi
484    endif # Dwarf support
485  endif # libelf support
486endif # NO_LIBELF
487
488ifeq ($(feature-libaio), 1)
489  ifndef NO_AIO
490    CFLAGS += -DHAVE_AIO_SUPPORT
491  endif
492endif
493
494ifdef NO_DWARF
495  NO_LIBDW_DWARF_UNWIND := 1
496endif
497
498ifeq ($(feature-scandirat), 1)
499  CFLAGS += -DHAVE_SCANDIRAT_SUPPORT
500endif
501
502ifeq ($(feature-sched_getcpu), 1)
503  CFLAGS += -DHAVE_SCHED_GETCPU_SUPPORT
504endif
505
506ifeq ($(feature-setns), 1)
507  CFLAGS += -DHAVE_SETNS_SUPPORT
508  $(call detected,CONFIG_SETNS)
509endif
510
511ifdef CORESIGHT
512  $(call feature_check,libopencsd)
513  ifeq ($(feature-libopencsd), 1)
514    CFLAGS += -DHAVE_CSTRACE_SUPPORT $(LIBOPENCSD_CFLAGS)
515    ifeq ($(feature-reallocarray), 0)
516      CFLAGS += -DCOMPAT_NEED_REALLOCARRAY
517    endif
518    LDFLAGS += $(LIBOPENCSD_LDFLAGS)
519    EXTLIBS += $(OPENCSDLIBS)
520    $(call detected,CONFIG_LIBOPENCSD)
521    ifdef CSTRACE_RAW
522      CFLAGS += -DCS_DEBUG_RAW
523      ifeq (${CSTRACE_RAW}, packed)
524        CFLAGS += -DCS_RAW_PACKED
525      endif
526    endif
527  else
528    dummy := $(error Error: No libopencsd library found or the version is not up-to-date. Please install recent libopencsd to build with CORESIGHT=1)
529  endif
530endif
531
532ifndef NO_ZLIB
533  ifeq ($(feature-zlib), 1)
534    CFLAGS += -DHAVE_ZLIB_SUPPORT
535    EXTLIBS += -lz
536    $(call detected,CONFIG_ZLIB)
537  else
538    NO_ZLIB := 1
539  endif
540endif
541
542ifndef NO_LIBELF
543  CFLAGS += -DHAVE_LIBELF_SUPPORT
544  EXTLIBS += -lelf
545  $(call detected,CONFIG_LIBELF)
546
547  ifeq ($(feature-libelf-getphdrnum), 1)
548    CFLAGS += -DHAVE_ELF_GETPHDRNUM_SUPPORT
549  endif
550
551  ifeq ($(feature-libelf-gelf_getnote), 1)
552    CFLAGS += -DHAVE_GELF_GETNOTE_SUPPORT
553  else
554    msg := $(warning gelf_getnote() not found on libelf, SDT support disabled);
555  endif
556
557  ifeq ($(feature-libelf-getshdrstrndx), 1)
558    CFLAGS += -DHAVE_ELF_GETSHDRSTRNDX_SUPPORT
559  endif
560
561  ifndef NO_LIBDEBUGINFOD
562    $(call feature_check,libdebuginfod)
563    ifeq ($(feature-libdebuginfod), 1)
564      CFLAGS += -DHAVE_DEBUGINFOD_SUPPORT
565      EXTLIBS += -ldebuginfod
566    endif
567  endif
568
569  ifndef NO_DWARF
570    ifeq ($(origin PERF_HAVE_DWARF_REGS), undefined)
571      msg := $(warning DWARF register mappings have not been defined for architecture $(SRCARCH), DWARF support disabled);
572      NO_DWARF := 1
573    else
574      CFLAGS += -DHAVE_DWARF_SUPPORT $(LIBDW_CFLAGS)
575      LDFLAGS += $(LIBDW_LDFLAGS)
576      EXTLIBS += ${DWARFLIBS}
577      $(call detected,CONFIG_DWARF)
578    endif # PERF_HAVE_DWARF_REGS
579  endif # NO_DWARF
580
581  ifndef NO_LIBBPF
582    ifeq ($(feature-bpf), 1)
583      # detecting libbpf without LIBBPF_DYNAMIC, so make VF=1 shows libbpf detection status
584      $(call feature_check,libbpf)
585
586      ifdef LIBBPF_DYNAMIC
587        ifeq ($(feature-libbpf), 1)
588          EXTLIBS += -lbpf
589          CFLAGS += -DHAVE_LIBBPF_SUPPORT
590          $(call detected,CONFIG_LIBBPF)
591          $(call detected,CONFIG_LIBBPF_DYNAMIC)
592        else
593          dummy := $(error Error: No libbpf devel library found or older than v1.0, please install/update libbpf-devel);
594        endif
595      else
596        ifeq ($(NO_ZLIB), 1)
597          dummy := $(warning Warning: Statically building libbpf not possible as zlib is missing)
598          NO_LIBBPF := 1
599        else
600          # Libbpf will be built as a static library from tools/lib/bpf.
601          LIBBPF_STATIC := 1
602          $(call detected,CONFIG_LIBBPF)
603          CFLAGS += -DHAVE_LIBBPF_SUPPORT
604        endif
605      endif
606    endif
607  endif # NO_LIBBPF
608endif # NO_LIBELF
609
610ifndef NO_SDT
611  ifneq ($(feature-sdt), 1)
612    msg := $(warning No sys/sdt.h found, no SDT events are defined, please install systemtap-sdt-devel or systemtap-sdt-dev);
613    NO_SDT := 1;
614  else
615    CFLAGS += -DHAVE_SDT_EVENT
616    $(call detected,CONFIG_SDT_EVENT)
617  endif
618endif
619
620ifdef PERF_HAVE_JITDUMP
621  ifndef NO_LIBELF
622    $(call detected,CONFIG_JITDUMP)
623    CFLAGS += -DHAVE_JITDUMP
624  endif
625endif
626
627ifeq ($(SRCARCH),powerpc)
628  ifndef NO_DWARF
629    CFLAGS += -DHAVE_SKIP_CALLCHAIN_IDX
630  endif
631endif
632
633ifndef NO_LIBUNWIND
634  have_libunwind :=
635
636  $(call feature_check,libunwind-x86)
637  ifeq ($(feature-libunwind-x86), 1)
638    $(call detected,CONFIG_LIBUNWIND_X86)
639    CFLAGS += -DHAVE_LIBUNWIND_X86_SUPPORT
640    LDFLAGS += -lunwind-x86
641    EXTLIBS_LIBUNWIND += -lunwind-x86
642    have_libunwind = 1
643  endif
644
645  $(call feature_check,libunwind-aarch64)
646  ifeq ($(feature-libunwind-aarch64), 1)
647    $(call detected,CONFIG_LIBUNWIND_AARCH64)
648    CFLAGS += -DHAVE_LIBUNWIND_AARCH64_SUPPORT
649    LDFLAGS += -lunwind-aarch64
650    EXTLIBS_LIBUNWIND += -lunwind-aarch64
651    have_libunwind = 1
652    $(call feature_check,libunwind-debug-frame-aarch64)
653    ifneq ($(feature-libunwind-debug-frame-aarch64), 1)
654      msg := $(warning No debug_frame support found in libunwind-aarch64);
655      CFLAGS += -DNO_LIBUNWIND_DEBUG_FRAME_AARCH64
656    endif
657  endif
658
659  ifneq ($(feature-libunwind), 1)
660    msg := $(warning No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR);
661    NO_LOCAL_LIBUNWIND := 1
662  else
663    have_libunwind := 1
664    $(call detected,CONFIG_LOCAL_LIBUNWIND)
665  endif
666
667  ifneq ($(have_libunwind), 1)
668    NO_LIBUNWIND := 1
669  endif
670else
671  NO_LOCAL_LIBUNWIND := 1
672endif
673
674ifndef NO_LIBBPF
675  ifneq ($(feature-bpf), 1)
676    msg := $(warning BPF API too old. Please install recent kernel headers. BPF support in 'perf record' is disabled.)
677    NO_LIBBPF := 1
678  endif
679endif
680
681ifndef BUILD_BPF_SKEL
682  # BPF skeletons control a large number of perf features, by default
683  # they are enabled.
684  BUILD_BPF_SKEL := 1
685endif
686
687ifeq ($(BUILD_BPF_SKEL),1)
688  ifeq ($(filter -DHAVE_LIBELF_SUPPORT, $(CFLAGS)),)
689    dummy := $(warning Warning: Disabled BPF skeletons as libelf is required by bpftool)
690    BUILD_BPF_SKEL := 0
691  else ifeq ($(filter -DHAVE_ZLIB_SUPPORT, $(CFLAGS)),)
692    dummy := $(warning Warning: Disabled BPF skeletons as zlib is required by bpftool)
693    BUILD_BPF_SKEL := 0
694  else ifeq ($(filter -DHAVE_LIBBPF_SUPPORT, $(CFLAGS)),)
695    dummy := $(warning Warning: Disabled BPF skeletons as libbpf is required)
696    BUILD_BPF_SKEL := 0
697  else ifeq ($(call get-executable,$(CLANG)),)
698    dummy := $(warning Warning: Disabled BPF skeletons as clang ($(CLANG)) is missing)
699    BUILD_BPF_SKEL := 0
700  else
701    CLANG_VERSION := $(shell $(CLANG) --version | head -1 | sed 's/.*clang version \([[:digit:]]\+.[[:digit:]]\+.[[:digit:]]\+\).*/\1/g')
702    ifeq ($(call version-lt3,$(CLANG_VERSION),12.0.1),1)
703      dummy := $(warning Warning: Disabled BPF skeletons as reliable BTF generation needs at least $(CLANG) version 12.0.1)
704      BUILD_BPF_SKEL := 0
705    endif
706  endif
707  ifeq ($(BUILD_BPF_SKEL),1)
708    $(call feature_check,clang-bpf-co-re)
709    ifeq ($(feature-clang-bpf-co-re), 0)
710      dummy := $(warning Warning: Disabled BPF skeletons as clang is too old)
711      BUILD_BPF_SKEL := 0
712    endif
713  endif
714  ifeq ($(BUILD_BPF_SKEL),1)
715    $(call detected,CONFIG_PERF_BPF_SKEL)
716    CFLAGS += -DHAVE_BPF_SKEL
717  endif
718endif
719
720ifndef GEN_VMLINUX_H
721  VMLINUX_H=$(src-perf)/util/bpf_skel/vmlinux/vmlinux.h
722endif
723
724dwarf-post-unwind := 1
725dwarf-post-unwind-text := BUG
726
727# setup DWARF post unwinder
728ifdef NO_LIBUNWIND
729  ifdef NO_LIBDW_DWARF_UNWIND
730    msg := $(warning Disabling post unwind, no support found.);
731    dwarf-post-unwind := 0
732  else
733    dwarf-post-unwind-text := libdw
734    $(call detected,CONFIG_LIBDW_DWARF_UNWIND)
735  endif
736else
737  dwarf-post-unwind-text := libunwind
738  $(call detected,CONFIG_LIBUNWIND)
739  # Enable libunwind support by default.
740  ifndef NO_LIBDW_DWARF_UNWIND
741    NO_LIBDW_DWARF_UNWIND := 1
742  endif
743endif
744
745ifeq ($(dwarf-post-unwind),1)
746  CFLAGS += -DHAVE_DWARF_UNWIND_SUPPORT
747  $(call detected,CONFIG_DWARF_UNWIND)
748else
749  NO_DWARF_UNWIND := 1
750endif
751
752ifndef NO_LOCAL_LIBUNWIND
753  ifeq ($(SRCARCH),$(filter $(SRCARCH),arm arm64))
754    $(call feature_check,libunwind-debug-frame)
755    ifneq ($(feature-libunwind-debug-frame), 1)
756      msg := $(warning No debug_frame support found in libunwind);
757      CFLAGS += -DNO_LIBUNWIND_DEBUG_FRAME
758    endif
759  else
760    # non-ARM has no dwarf_find_debug_frame() function:
761    CFLAGS += -DNO_LIBUNWIND_DEBUG_FRAME
762  endif
763  EXTLIBS += $(LIBUNWIND_LIBS)
764  LDFLAGS += $(LIBUNWIND_LIBS)
765endif
766ifeq ($(findstring -static,${LDFLAGS}),-static)
767  # gcc -static links libgcc_eh which contans piece of libunwind
768  LIBUNWIND_LDFLAGS += -Wl,--allow-multiple-definition
769endif
770
771ifndef NO_LIBUNWIND
772  CFLAGS  += -DHAVE_LIBUNWIND_SUPPORT
773  CFLAGS  += $(LIBUNWIND_CFLAGS)
774  LDFLAGS += $(LIBUNWIND_LDFLAGS)
775  EXTLIBS += $(EXTLIBS_LIBUNWIND)
776endif
777
778ifneq ($(NO_LIBTRACEEVENT),1)
779  ifeq ($(NO_SYSCALL_TABLE),0)
780    $(call detected,CONFIG_TRACE)
781  else
782    ifndef NO_LIBAUDIT
783      $(call feature_check,libaudit)
784      ifneq ($(feature-libaudit), 1)
785        msg := $(warning No libaudit.h found, disables 'trace' tool, please install audit-libs-devel or libaudit-dev);
786        NO_LIBAUDIT := 1
787      else
788        CFLAGS += -DHAVE_LIBAUDIT_SUPPORT
789        EXTLIBS += -laudit
790        $(call detected,CONFIG_TRACE)
791      endif
792    endif
793  endif
794endif
795
796ifndef NO_LIBCRYPTO
797  ifneq ($(feature-libcrypto), 1)
798    msg := $(warning No libcrypto.h found, disables jitted code injection, please install openssl-devel or libssl-dev);
799    NO_LIBCRYPTO := 1
800  else
801    CFLAGS += -DHAVE_LIBCRYPTO_SUPPORT
802    EXTLIBS += -lcrypto
803    $(call detected,CONFIG_CRYPTO)
804  endif
805endif
806
807ifndef NO_SLANG
808  ifneq ($(feature-libslang), 1)
809    ifneq ($(feature-libslang-include-subdir), 1)
810      msg := $(warning slang not found, disables TUI support. Please install slang-devel, libslang-dev or libslang2-dev);
811      NO_SLANG := 1
812    else
813      CFLAGS += -DHAVE_SLANG_INCLUDE_SUBDIR
814    endif
815  endif
816  ifndef NO_SLANG
817    # Fedora has /usr/include/slang/slang.h, but ubuntu /usr/include/slang.h
818    CFLAGS += -DHAVE_SLANG_SUPPORT
819    EXTLIBS += -lslang
820    $(call detected,CONFIG_SLANG)
821  endif
822endif
823
824ifdef GTK2
825  FLAGS_GTK2=$(CFLAGS) $(LDFLAGS) $(EXTLIBS) $(shell $(PKG_CONFIG) --libs --cflags gtk+-2.0 2>/dev/null)
826  $(call feature_check,gtk2)
827  ifneq ($(feature-gtk2), 1)
828    msg := $(warning GTK2 not found, disables GTK2 support. Please install gtk2-devel or libgtk2.0-dev);
829    NO_GTK2 := 1
830  else
831    $(call feature_check,gtk2-infobar)
832    ifeq ($(feature-gtk2-infobar), 1)
833      GTK_CFLAGS := -DHAVE_GTK_INFO_BAR_SUPPORT
834    endif
835    CFLAGS += -DHAVE_GTK2_SUPPORT
836    GTK_CFLAGS += $(shell $(PKG_CONFIG) --cflags gtk+-2.0 2>/dev/null)
837    GTK_LIBS := $(shell $(PKG_CONFIG) --libs gtk+-2.0 2>/dev/null)
838    EXTLIBS += -ldl
839  endif
840endif
841
842ifdef NO_LIBPERL
843  CFLAGS += -DNO_LIBPERL
844else
845  PERL_EMBED_LDOPTS = $(shell perl -MExtUtils::Embed -e ldopts 2>/dev/null)
846  PERL_EMBED_LDFLAGS = $(call strip-libs,$(PERL_EMBED_LDOPTS))
847  PERL_EMBED_LIBADD = $(call grep-libs,$(PERL_EMBED_LDOPTS))
848  PERL_EMBED_CCOPTS = $(shell perl -MExtUtils::Embed -e ccopts 2>/dev/null)
849  PERL_EMBED_CCOPTS := $(filter-out -specs=%,$(PERL_EMBED_CCOPTS))
850  PERL_EMBED_CCOPTS := $(filter-out -flto=auto -ffat-lto-objects, $(PERL_EMBED_CCOPTS))
851  PERL_EMBED_LDOPTS := $(filter-out -specs=%,$(PERL_EMBED_LDOPTS))
852  FLAGS_PERL_EMBED=$(PERL_EMBED_CCOPTS) $(PERL_EMBED_LDOPTS)
853
854  ifneq ($(feature-libperl), 1)
855    CFLAGS += -DNO_LIBPERL
856    NO_LIBPERL := 1
857    msg := $(warning Missing perl devel files. Disabling perl scripting support, please install perl-ExtUtils-Embed/libperl-dev);
858  else
859    LDFLAGS += $(PERL_EMBED_LDFLAGS)
860    EXTLIBS += $(PERL_EMBED_LIBADD)
861    CFLAGS += -DHAVE_LIBPERL_SUPPORT
862    ifeq ($(CC_NO_CLANG), 0)
863      CFLAGS += -Wno-compound-token-split-by-macro
864    endif
865    $(call detected,CONFIG_LIBPERL)
866  endif
867endif
868
869ifeq ($(feature-timerfd), 1)
870  CFLAGS += -DHAVE_TIMERFD_SUPPORT
871else
872  msg := $(warning No timerfd support. Disables 'perf kvm stat live');
873endif
874
875disable-python = $(eval $(disable-python_code))
876define disable-python_code
877  CFLAGS += -DNO_LIBPYTHON
878  $(warning $1)
879  NO_LIBPYTHON := 1
880endef
881
882PYTHON_EXTENSION_SUFFIX := '.so'
883ifdef NO_LIBPYTHON
884  $(call disable-python,Python support disabled by user)
885else
886
887  ifndef PYTHON
888    $(call disable-python,No python interpreter was found: disables Python support - please install python-devel/python-dev)
889  else
890    PYTHON_WORD := $(call shell-wordify,$(PYTHON))
891
892    ifndef PYTHON_CONFIG
893      $(call disable-python,No 'python-config' tool was found: disables Python support - please install python-devel/python-dev)
894    else
895
896      ifneq ($(feature-libpython), 1)
897        $(call disable-python,No 'Python.h' was found: disables Python support - please install python-devel/python-dev)
898      else
899         LDFLAGS += $(PYTHON_EMBED_LDFLAGS)
900         EXTLIBS += $(PYTHON_EMBED_LIBADD)
901         PYTHON_SETUPTOOLS_INSTALLED := $(shell $(PYTHON) -c 'import setuptools;' 2> /dev/null && echo "yes" || echo "no")
902         ifeq ($(PYTHON_SETUPTOOLS_INSTALLED), yes)
903           PYTHON_EXTENSION_SUFFIX := $(shell $(PYTHON) -c 'from importlib import machinery; print(machinery.EXTENSION_SUFFIXES[0])')
904           LANG_BINDINGS += $(obj-perf)python/perf$(PYTHON_EXTENSION_SUFFIX)
905	 else
906           msg := $(warning Missing python setuptools, the python binding won't be built, please install python3-setuptools or equivalent);
907         endif
908         CFLAGS += -DHAVE_LIBPYTHON_SUPPORT
909         $(call detected,CONFIG_LIBPYTHON)
910      endif
911    endif
912  endif
913endif
914
915ifneq ($(NO_JEVENTS),1)
916  ifeq ($(wildcard pmu-events/arch/$(SRCARCH)/mapfile.csv),)
917    NO_JEVENTS := 1
918  endif
919endif
920ifneq ($(NO_JEVENTS),1)
921  NO_JEVENTS := 0
922  ifndef PYTHON
923    $(error ERROR: No python interpreter needed for jevents generation. Install python or build with NO_JEVENTS=1.)
924  else
925    # jevents.py uses f-strings present in Python 3.6 released in Dec. 2016.
926    JEVENTS_PYTHON_GOOD := $(shell $(PYTHON) -c 'import sys;print("1" if(sys.version_info.major >= 3 and sys.version_info.minor >= 6) else "0")' 2> /dev/null)
927    ifneq ($(JEVENTS_PYTHON_GOOD), 1)
928      $(error ERROR: Python interpreter needed for jevents generation too old (older than 3.6). Install a newer python or build with NO_JEVENTS=1.)
929    endif
930  endif
931endif
932
933ifdef BUILD_NONDISTRO
934  ifeq ($(feature-libbfd), 1)
935    EXTLIBS += -lbfd -lopcodes
936  else
937    # we are on a system that requires -liberty and (maybe) -lz
938    # to link against -lbfd; test each case individually here
939
940    # call all detections now so we get correct
941    # status in VF output
942    $(call feature_check,libbfd-liberty)
943    $(call feature_check,libbfd-liberty-z)
944
945    ifeq ($(feature-libbfd-liberty), 1)
946      EXTLIBS += -lbfd -lopcodes -liberty
947      FEATURE_CHECK_LDFLAGS-disassembler-four-args += -liberty -ldl
948      FEATURE_CHECK_LDFLAGS-disassembler-init-styled += -liberty -ldl
949    else
950      ifeq ($(feature-libbfd-liberty-z), 1)
951        EXTLIBS += -lbfd -lopcodes -liberty -lz
952        FEATURE_CHECK_LDFLAGS-disassembler-four-args += -liberty -lz -ldl
953        FEATURE_CHECK_LDFLAGS-disassembler-init-styled += -liberty -lz -ldl
954      endif
955    endif
956    $(call feature_check,disassembler-four-args)
957    $(call feature_check,disassembler-init-styled)
958  endif
959
960  CFLAGS += -DHAVE_LIBBFD_SUPPORT
961  CXXFLAGS += -DHAVE_LIBBFD_SUPPORT
962  ifeq ($(feature-libbfd-buildid), 1)
963    CFLAGS += -DHAVE_LIBBFD_BUILDID_SUPPORT
964  else
965    msg := $(warning Old version of libbfd/binutils things like PE executable profiling will not be available);
966  endif
967endif
968
969ifndef NO_DEMANGLE
970  $(call feature_check,cxa-demangle)
971  ifeq ($(feature-cxa-demangle), 1)
972    EXTLIBS += -lstdc++
973    CFLAGS += -DHAVE_CXA_DEMANGLE_SUPPORT
974    CXXFLAGS += -DHAVE_CXA_DEMANGLE_SUPPORT
975    $(call detected,CONFIG_CXX_DEMANGLE)
976  endif
977  ifdef BUILD_NONDISTRO
978    ifeq ($(filter -liberty,$(EXTLIBS)),)
979      $(call feature_check,cplus-demangle)
980      ifeq ($(feature-cplus-demangle), 1)
981        EXTLIBS += -liberty
982      endif
983    endif
984    ifneq ($(filter -liberty,$(EXTLIBS)),)
985      CFLAGS += -DHAVE_CPLUS_DEMANGLE_SUPPORT
986      CXXFLAGS += -DHAVE_CPLUS_DEMANGLE_SUPPORT
987    endif
988  endif
989endif
990
991ifndef NO_LZMA
992  ifeq ($(feature-lzma), 1)
993    CFLAGS += -DHAVE_LZMA_SUPPORT
994    EXTLIBS += -llzma
995    $(call detected,CONFIG_LZMA)
996  else
997    msg := $(warning No liblzma found, disables xz kernel module decompression, please install xz-devel/liblzma-dev);
998    NO_LZMA := 1
999  endif
1000endif
1001
1002ifndef NO_LIBZSTD
1003  ifeq ($(feature-libzstd), 1)
1004    CFLAGS += -DHAVE_ZSTD_SUPPORT
1005    CFLAGS += $(LIBZSTD_CFLAGS)
1006    LDFLAGS += $(LIBZSTD_LDFLAGS)
1007    EXTLIBS += -lzstd
1008    $(call detected,CONFIG_ZSTD)
1009  else
1010    msg := $(warning No libzstd found, disables trace compression, please install libzstd-dev[el] and/or set LIBZSTD_DIR);
1011    NO_LIBZSTD := 1
1012  endif
1013endif
1014
1015ifndef NO_LIBCAP
1016  ifeq ($(feature-libcap), 1)
1017    CFLAGS += -DHAVE_LIBCAP_SUPPORT
1018    EXTLIBS += -lcap
1019    $(call detected,CONFIG_LIBCAP)
1020  else
1021    msg := $(warning No libcap found, disables capability support, please install libcap-devel/libcap-dev);
1022    NO_LIBCAP := 1
1023  endif
1024endif
1025
1026ifndef NO_BACKTRACE
1027  ifeq ($(feature-backtrace), 1)
1028    CFLAGS += -DHAVE_BACKTRACE_SUPPORT
1029  endif
1030endif
1031
1032ifndef NO_LIBNUMA
1033  ifeq ($(feature-libnuma), 0)
1034    msg := $(warning No numa.h found, disables 'perf bench numa mem' benchmark, please install numactl-devel/libnuma-devel/libnuma-dev);
1035    NO_LIBNUMA := 1
1036  else
1037    ifeq ($(feature-numa_num_possible_cpus), 0)
1038      msg := $(warning Old numa library found, disables 'perf bench numa mem' benchmark, please install numactl-devel/libnuma-devel/libnuma-dev >= 2.0.8);
1039      NO_LIBNUMA := 1
1040    else
1041      CFLAGS += -DHAVE_LIBNUMA_SUPPORT
1042      EXTLIBS += -lnuma
1043      $(call detected,CONFIG_NUMA)
1044    endif
1045  endif
1046endif
1047
1048ifdef HAVE_KVM_STAT_SUPPORT
1049    CFLAGS += -DHAVE_KVM_STAT_SUPPORT
1050endif
1051
1052ifeq ($(feature-disassembler-four-args), 1)
1053    CFLAGS += -DDISASM_FOUR_ARGS_SIGNATURE
1054endif
1055
1056ifeq ($(feature-disassembler-init-styled), 1)
1057    CFLAGS += -DDISASM_INIT_STYLED
1058endif
1059
1060ifeq (${IS_64_BIT}, 1)
1061  ifndef NO_PERF_READ_VDSO32
1062    $(call feature_check,compile-32)
1063    ifeq ($(feature-compile-32), 1)
1064      CFLAGS += -DHAVE_PERF_READ_VDSO32
1065    else
1066      NO_PERF_READ_VDSO32 := 1
1067    endif
1068  endif
1069  ifneq ($(SRCARCH), x86)
1070    NO_PERF_READ_VDSOX32 := 1
1071  endif
1072  ifndef NO_PERF_READ_VDSOX32
1073    $(call feature_check,compile-x32)
1074    ifeq ($(feature-compile-x32), 1)
1075      CFLAGS += -DHAVE_PERF_READ_VDSOX32
1076    else
1077      NO_PERF_READ_VDSOX32 := 1
1078    endif
1079  endif
1080else
1081  NO_PERF_READ_VDSO32 := 1
1082  NO_PERF_READ_VDSOX32 := 1
1083endif
1084
1085ifndef NO_LIBBABELTRACE
1086  $(call feature_check,libbabeltrace)
1087  ifeq ($(feature-libbabeltrace), 1)
1088    CFLAGS += -DHAVE_LIBBABELTRACE_SUPPORT $(LIBBABELTRACE_CFLAGS)
1089    LDFLAGS += $(LIBBABELTRACE_LDFLAGS)
1090    EXTLIBS += -lbabeltrace-ctf
1091    $(call detected,CONFIG_LIBBABELTRACE)
1092  else
1093    msg := $(warning No libbabeltrace found, disables 'perf data' CTF format support, please install libbabeltrace-dev[el]/libbabeltrace-ctf-dev);
1094  endif
1095endif
1096
1097ifndef NO_AUXTRACE
1098  ifeq ($(SRCARCH),x86)
1099    ifeq ($(feature-get_cpuid), 0)
1100      msg := $(warning Your gcc lacks the __get_cpuid() builtin, disables support for auxtrace/Intel PT, please install a newer gcc);
1101      NO_AUXTRACE := 1
1102    endif
1103  endif
1104  ifndef NO_AUXTRACE
1105    $(call detected,CONFIG_AUXTRACE)
1106    CFLAGS += -DHAVE_AUXTRACE_SUPPORT
1107    ifeq ($(feature-reallocarray), 0)
1108      CFLAGS += -DCOMPAT_NEED_REALLOCARRAY
1109    endif
1110  endif
1111endif
1112
1113ifdef EXTRA_TESTS
1114    $(call detected,CONFIG_EXTRA_TESTS)
1115    CFLAGS += -DHAVE_EXTRA_TESTS
1116endif
1117
1118ifndef NO_JVMTI
1119  ifneq (,$(wildcard /usr/sbin/update-java-alternatives))
1120    JDIR=$(shell /usr/sbin/update-java-alternatives -l | head -1 | awk '{print $$3}')
1121  else
1122    ifneq (,$(wildcard /usr/sbin/alternatives))
1123      JDIR=$(shell /usr/sbin/alternatives --display java | tail -1 | cut -d' ' -f 5 | sed -e 's%/jre/bin/java.%%g' -e 's%/bin/java.%%g')
1124    endif
1125  endif
1126  ifndef JDIR
1127    $(warning No alternatives command found, you need to set JDIR= to point to the root of your Java directory)
1128    NO_JVMTI := 1
1129  endif
1130endif
1131
1132ifndef NO_JVMTI
1133  FEATURE_CHECK_CFLAGS-jvmti := -I$(JDIR)/include -I$(JDIR)/include/linux
1134  $(call feature_check,jvmti)
1135  ifeq ($(feature-jvmti), 1)
1136    $(call detected_var,JDIR)
1137    ifndef NO_JVMTI_CMLR
1138      FEATURE_CHECK_CFLAGS-jvmti-cmlr := $(FEATURE_CHECK_CFLAGS-jvmti)
1139      $(call feature_check,jvmti-cmlr)
1140      ifeq ($(feature-jvmti-cmlr), 1)
1141        CFLAGS += -DHAVE_JVMTI_CMLR
1142      endif
1143    endif # NO_JVMTI_CMLR
1144  else
1145    $(warning No openjdk development package found, please install JDK package, e.g. openjdk-8-jdk, java-1.8.0-openjdk-devel)
1146    NO_JVMTI := 1
1147  endif
1148endif
1149
1150ifndef NO_LIBPFM4
1151  $(call feature_check,libpfm4)
1152  ifeq ($(feature-libpfm4), 1)
1153    CFLAGS += -DHAVE_LIBPFM
1154    EXTLIBS += -lpfm
1155    ASCIIDOC_EXTRA = -aHAVE_LIBPFM=1
1156    $(call detected,CONFIG_LIBPFM4)
1157  else
1158    msg := $(warning libpfm4 not found, disables libpfm4 support. Please install libpfm4-dev);
1159  endif
1160endif
1161
1162# libtraceevent is a recommended dependency picked up from the system.
1163ifneq ($(NO_LIBTRACEEVENT),1)
1164  $(call feature_check,libtraceevent)
1165  ifeq ($(feature-libtraceevent), 1)
1166    CFLAGS += -DHAVE_LIBTRACEEVENT
1167    EXTLIBS += -ltraceevent
1168    LIBTRACEEVENT_VERSION := $(shell $(PKG_CONFIG) --modversion libtraceevent)
1169    LIBTRACEEVENT_VERSION_1 := $(word 1, $(subst ., ,$(LIBTRACEEVENT_VERSION)))
1170    LIBTRACEEVENT_VERSION_2 := $(word 2, $(subst ., ,$(LIBTRACEEVENT_VERSION)))
1171    LIBTRACEEVENT_VERSION_3 := $(word 3, $(subst ., ,$(LIBTRACEEVENT_VERSION)))
1172    LIBTRACEEVENT_VERSION_CPP := $(shell expr $(LIBTRACEEVENT_VERSION_1) \* 255 \* 255 + $(LIBTRACEEVENT_VERSION_2) \* 255 + $(LIBTRACEEVENT_VERSION_3))
1173    CFLAGS += -DLIBTRACEEVENT_VERSION=$(LIBTRACEEVENT_VERSION_CPP)
1174    $(call detected,CONFIG_LIBTRACEEVENT)
1175  else
1176    dummy := $(error ERROR: libtraceevent is missing. Please install libtraceevent-dev/libtraceevent-devel or build with NO_LIBTRACEEVENT=1)
1177  endif
1178
1179  $(call feature_check,libtracefs)
1180  ifeq ($(feature-libtracefs), 1)
1181    EXTLIBS += -ltracefs
1182    LIBTRACEFS_VERSION := $(shell $(PKG_CONFIG) --modversion libtracefs)
1183    LIBTRACEFS_VERSION_1 := $(word 1, $(subst ., ,$(LIBTRACEFS_VERSION)))
1184    LIBTRACEFS_VERSION_2 := $(word 2, $(subst ., ,$(LIBTRACEFS_VERSION)))
1185    LIBTRACEFS_VERSION_3 := $(word 3, $(subst ., ,$(LIBTRACEFS_VERSION)))
1186    LIBTRACEFS_VERSION_CPP := $(shell expr $(LIBTRACEFS_VERSION_1) \* 255 \* 255 + $(LIBTRACEFS_VERSION_2) \* 255 + $(LIBTRACEFS_VERSION_3))
1187    CFLAGS += -DLIBTRACEFS_VERSION=$(LIBTRACEFS_VERSION_CPP)
1188  endif
1189endif
1190
1191# Among the variables below, these:
1192#   perfexecdir
1193#   libbpf_include_dir
1194#   perf_examples_dir
1195#   template_dir
1196#   mandir
1197#   infodir
1198#   htmldir
1199#   ETC_PERFCONFIG (but not sysconfdir)
1200# can be specified as a relative path some/where/else;
1201# this is interpreted as relative to $(prefix) and "perf" at
1202# runtime figures out where they are based on the path to the executable.
1203# This can help installing the suite in a relocatable way.
1204
1205# Make the path relative to DESTDIR, not to prefix
1206ifndef DESTDIR
1207prefix ?= $(HOME)
1208endif
1209bindir_relative = bin
1210bindir = $(abspath $(prefix)/$(bindir_relative))
1211includedir_relative = include
1212includedir = $(abspath $(prefix)/$(includedir_relative))
1213mandir = share/man
1214infodir = share/info
1215perfexecdir = libexec/perf-core
1216# FIXME: system's libbpf header directory, where we expect to find bpf/bpf_helpers.h, for instance
1217libbpf_include_dir = /usr/include
1218perf_examples_dir = lib/perf/examples
1219sharedir = $(prefix)/share
1220template_dir = share/perf-core/templates
1221STRACE_GROUPS_DIR = share/perf-core/strace/groups
1222htmldir = share/doc/perf-doc
1223tipdir = share/doc/perf-tip
1224srcdir = $(srctree)/tools/perf
1225ifeq ($(prefix),/usr)
1226sysconfdir = /etc
1227ETC_PERFCONFIG = $(sysconfdir)/perfconfig
1228else
1229sysconfdir = $(prefix)/etc
1230ETC_PERFCONFIG = etc/perfconfig
1231endif
1232ifndef lib
1233ifeq ($(SRCARCH)$(IS_64_BIT), x861)
1234lib = lib64
1235else
1236lib = lib
1237endif
1238endif # lib
1239libdir = $(prefix)/$(lib)
1240
1241# Shell quote (do not use $(call) to accommodate ancient setups);
1242ETC_PERFCONFIG_SQ = $(subst ','\'',$(ETC_PERFCONFIG))
1243STRACE_GROUPS_DIR_SQ = $(subst ','\'',$(STRACE_GROUPS_DIR))
1244DESTDIR_SQ = $(subst ','\'',$(DESTDIR))
1245bindir_SQ = $(subst ','\'',$(bindir))
1246includedir_SQ = $(subst ','\'',$(includedir))
1247mandir_SQ = $(subst ','\'',$(mandir))
1248infodir_SQ = $(subst ','\'',$(infodir))
1249perfexecdir_SQ = $(subst ','\'',$(perfexecdir))
1250libbpf_include_dir_SQ = $(subst ','\'',$(libbpf_include_dir))
1251perf_examples_dir_SQ = $(subst ','\'',$(perf_examples_dir))
1252template_dir_SQ = $(subst ','\'',$(template_dir))
1253htmldir_SQ = $(subst ','\'',$(htmldir))
1254tipdir_SQ = $(subst ','\'',$(tipdir))
1255prefix_SQ = $(subst ','\'',$(prefix))
1256sysconfdir_SQ = $(subst ','\'',$(sysconfdir))
1257libdir_SQ = $(subst ','\'',$(libdir))
1258srcdir_SQ = $(subst ','\'',$(srcdir))
1259
1260ifneq ($(filter /%,$(firstword $(perfexecdir))),)
1261perfexec_instdir = $(perfexecdir)
1262perf_include_instdir = $(libbpf_include_dir)
1263perf_examples_instdir = $(perf_examples_dir)
1264STRACE_GROUPS_INSTDIR = $(STRACE_GROUPS_DIR)
1265tip_instdir = $(tipdir)
1266else
1267perfexec_instdir = $(prefix)/$(perfexecdir)
1268perf_include_instdir = $(prefix)/$(libbpf_include_dir)
1269perf_examples_instdir = $(prefix)/$(perf_examples_dir)
1270STRACE_GROUPS_INSTDIR = $(prefix)/$(STRACE_GROUPS_DIR)
1271tip_instdir = $(prefix)/$(tipdir)
1272endif
1273perfexec_instdir_SQ = $(subst ','\'',$(perfexec_instdir))
1274perf_include_instdir_SQ = $(subst ','\'',$(perf_include_instdir))
1275perf_examples_instdir_SQ = $(subst ','\'',$(perf_examples_instdir))
1276STRACE_GROUPS_INSTDIR_SQ = $(subst ','\'',$(STRACE_GROUPS_INSTDIR))
1277tip_instdir_SQ = $(subst ','\'',$(tip_instdir))
1278
1279export perfexec_instdir_SQ
1280
1281print_var = $(eval $(print_var_code)) $(info $(MSG))
1282define print_var_code
1283    MSG = $(shell printf '...%40s: %s' $(1) $($(1)))
1284endef
1285
1286ifeq ($(feature_display),1)
1287  $(call feature_display_entries)
1288endif
1289
1290ifeq ($(VF),1)
1291  # Display EXTRA features which are detected manualy
1292  # from here with feature_check call and thus cannot
1293  # be partof global state output.
1294  $(foreach feat,$(FEATURE_TESTS_EXTRA),$(call feature_print_status,$(feat),) $(info $(MSG)))
1295  $(call print_var,prefix)
1296  $(call print_var,bindir)
1297  $(call print_var,libdir)
1298  $(call print_var,sysconfdir)
1299  $(call print_var,LIBUNWIND_DIR)
1300  $(call print_var,LIBDW_DIR)
1301  $(call print_var,JDIR)
1302
1303  ifeq ($(dwarf-post-unwind),1)
1304    $(call feature_print_text,"DWARF post unwind library", $(dwarf-post-unwind-text)) $(info $(MSG))
1305  endif
1306endif
1307
1308$(info )
1309
1310$(call detected_var,bindir_SQ)
1311$(call detected_var,PYTHON_WORD)
1312ifneq ($(OUTPUT),)
1313$(call detected_var,OUTPUT)
1314endif
1315$(call detected_var,htmldir_SQ)
1316$(call detected_var,infodir_SQ)
1317$(call detected_var,mandir_SQ)
1318$(call detected_var,ETC_PERFCONFIG_SQ)
1319$(call detected_var,STRACE_GROUPS_DIR_SQ)
1320$(call detected_var,prefix_SQ)
1321$(call detected_var,perfexecdir_SQ)
1322$(call detected_var,libbpf_include_dir_SQ)
1323$(call detected_var,perf_examples_dir_SQ)
1324$(call detected_var,tipdir_SQ)
1325$(call detected_var,srcdir_SQ)
1326$(call detected_var,LIBDIR)
1327$(call detected_var,GTK_CFLAGS)
1328$(call detected_var,PERL_EMBED_CCOPTS)
1329$(call detected_var,PYTHON_EMBED_CCOPTS)
1330ifneq ($(BISON_FILE_PREFIX_MAP),)
1331$(call detected_var,BISON_FILE_PREFIX_MAP)
1332endif
1333
1334# re-generate FEATURE-DUMP as we may have called feature_check, found out
1335# extra libraries to add to LDFLAGS of some other test and then redo those
1336# tests, see the block about libbfd, disassembler-four-args, for instance.
1337$(shell rm -f $(FEATURE_DUMP_FILENAME))
1338$(foreach feat,$(FEATURE_TESTS),$(shell echo "$(call feature_assign,$(feat))" >> $(FEATURE_DUMP_FILENAME)))
1339