1perf-trace(1) 2============= 3 4NAME 5---- 6perf-trace - strace inspired tool 7 8SYNOPSIS 9-------- 10[verse] 11'perf trace' 12'perf trace record' 13 14DESCRIPTION 15----------- 16This command will show the events associated with the target, initially 17syscalls, but other system events like pagefaults, task lifetime events, 18scheduling events, etc. 19 20This is a live mode tool in addition to working with perf.data files like 21the other perf tools. Files can be generated using the 'perf record' command 22but the session needs to include the raw_syscalls events (-e 'raw_syscalls:*'). 23Alternatively, 'perf trace record' can be used as a shortcut to 24automatically include the raw_syscalls events when writing events to a file. 25 26The following options apply to perf trace; options to perf trace record are 27found in the perf record man page. 28 29OPTIONS 30------- 31 32-a:: 33--all-cpus:: 34 System-wide collection from all CPUs. 35 36-e:: 37--expr:: 38--event:: 39 List of syscalls and other perf events (tracepoints, HW cache events, 40 etc) to show. Globbing is supported, e.g.: "epoll_*", "*msg*", etc. 41 See 'perf list' for a complete list of events. 42 Prefixing with ! shows all syscalls but the ones specified. You may 43 need to escape it. 44 45-D msecs:: 46--delay msecs:: 47After starting the program, wait msecs before measuring. This is useful to 48filter out the startup phase of the program, which is often very different. 49 50-o:: 51--output=:: 52 Output file name. 53 54-p:: 55--pid=:: 56 Record events on existing process ID (comma separated list). 57 58-t:: 59--tid=:: 60 Record events on existing thread ID (comma separated list). 61 62-u:: 63--uid=:: 64 Record events in threads owned by uid. Name or number. 65 66--filter-pids=:: 67 Filter out events for these pids and for 'trace' itself (comma separated list). 68 69-v:: 70--verbose=:: 71 Verbosity level. 72 73--no-inherit:: 74 Child tasks do not inherit counters. 75 76-m:: 77--mmap-pages=:: 78 Number of mmap data pages (must be a power of two) or size 79 specification with appended unit character - B/K/M/G. The 80 size is rounded up to have nearest pages power of two value. 81 82-C:: 83--cpu:: 84Collect samples only on the list of CPUs provided. Multiple CPUs can be provided as a 85comma-separated list with no space: 0,1. Ranges of CPUs are specified with -: 0-2. 86In per-thread mode with inheritance mode on (default), Events are captured only when 87the thread executes on the designated CPUs. Default is to monitor all CPUs. 88 89--duration: 90 Show only events that had a duration greater than N.M ms. 91 92--sched: 93 Accrue thread runtime and provide a summary at the end of the session. 94 95-i 96--input 97 Process events from a given perf data file. 98 99-T 100--time 101 Print full timestamp rather time relative to first sample. 102 103--comm:: 104 Show process COMM right beside its ID, on by default, disable with --no-comm. 105 106-s:: 107--summary:: 108 Show only a summary of syscalls by thread with min, max, and average times 109 (in msec) and relative stddev. 110 111-S:: 112--with-summary:: 113 Show all syscalls followed by a summary by thread with min, max, and 114 average times (in msec) and relative stddev. 115 116--tool_stats:: 117 Show tool stats such as number of times fd->pathname was discovered thru 118 hooking the open syscall return + vfs_getname or via reading /proc/pid/fd, etc. 119 120-F=[all|min|maj]:: 121--pf=[all|min|maj]:: 122 Trace pagefaults. Optionally, you can specify whether you want minor, 123 major or all pagefaults. Default value is maj. 124 125--syscalls:: 126 Trace system calls. This options is enabled by default, disable with 127 --no-syscalls. 128 129--call-graph [mode,type,min[,limit],order[,key][,branch]]:: 130 Setup and enable call-graph (stack chain/backtrace) recording. 131 See `--call-graph` section in perf-record and perf-report 132 man pages for details. The ones that are most useful in 'perf trace' 133 are 'dwarf' and 'lbr', where available, try: 'perf trace --call-graph dwarf'. 134 135 Using this will, for the root user, bump the value of --mmap-pages to 4 136 times the maximum for non-root users, based on the kernel.perf_event_mlock_kb 137 sysctl. This is done only if the user doesn't specify a --mmap-pages value. 138 139--kernel-syscall-graph:: 140 Show the kernel callchains on the syscall exit path. 141 142--max-stack:: 143 Set the stack depth limit when parsing the callchain, anything 144 beyond the specified depth will be ignored. Note that at this point 145 this is just about the presentation part, i.e. the kernel is still 146 not limiting, the overhead of callchains needs to be set via the 147 knobs in --call-graph dwarf. 148 149 Implies '--call-graph dwarf' when --call-graph not present on the 150 command line, on systems where DWARF unwinding was built in. 151 152 Default: /proc/sys/kernel/perf_event_max_stack when present for 153 live sessions (without --input/-i), 127 otherwise. 154 155--min-stack:: 156 Set the stack depth limit when parsing the callchain, anything 157 below the specified depth will be ignored. Disabled by default. 158 159 Implies '--call-graph dwarf' when --call-graph not present on the 160 command line, on systems where DWARF unwinding was built in. 161 162--proc-map-timeout:: 163 When processing pre-existing threads /proc/XXX/mmap, it may take a long time, 164 because the file may be huge. A time out is needed in such cases. 165 This option sets the time out limit. The default value is 500 ms. 166 167PAGEFAULTS 168---------- 169 170When tracing pagefaults, the format of the trace is as follows: 171 172<min|maj>fault [<ip.symbol>+<ip.offset>] => <addr.dso@addr.offset> (<map type><addr level>). 173 174- min/maj indicates whether fault event is minor or major; 175- ip.symbol shows symbol for instruction pointer (the code that generated the 176 fault); if no debug symbols available, perf trace will print raw IP; 177- addr.dso shows DSO for the faulted address; 178- map type is either 'd' for non-executable maps or 'x' for executable maps; 179- addr level is either 'k' for kernel dso or '.' for user dso. 180 181For symbols resolution you may need to install debugging symbols. 182 183Please be aware that duration is currently always 0 and doesn't reflect actual 184time it took for fault to be handled! 185 186When --verbose specified, perf trace tries to print all available information 187for both IP and fault address in the form of dso@symbol+offset. 188 189EXAMPLES 190-------- 191 192Trace only major pagefaults: 193 194 $ perf trace --no-syscalls -F 195 196Trace syscalls, major and minor pagefaults: 197 198 $ perf trace -F all 199 200 1416.547 ( 0.000 ms): python/20235 majfault [CRYPTO_push_info_+0x0] => /lib/x86_64-linux-gnu/libcrypto.so.1.0.0@0x61be0 (x.) 201 202 As you can see, there was major pagefault in python process, from 203 CRYPTO_push_info_ routine which faulted somewhere in libcrypto.so. 204 205SEE ALSO 206-------- 207linkperf:perf-record[1], linkperf:perf-script[1] 208