1perf-mem(1) 2=========== 3 4NAME 5---- 6perf-mem - Profile memory accesses 7 8SYNOPSIS 9-------- 10[verse] 11'perf mem' [<options>] (record [<command>] | report) 12 13DESCRIPTION 14----------- 15"perf mem record" runs a command and gathers memory operation data 16from it, into perf.data. Perf record options are accepted and are passed through. 17 18"perf mem report" displays the result. It invokes perf report with the 19right set of options to display a memory access profile. By default, loads 20and stores are sampled. Use the -t option to limit to loads or stores. 21 22Note that on Intel systems the memory latency reported is the use-latency, 23not the pure load (or store latency). Use latency includes any pipeline 24queueing delays in addition to the memory subsystem latency. 25 26On Arm64 this uses SPE to sample load and store operations, therefore hardware 27and kernel support is required. See linkperf:perf-arm-spe[1] for a setup guide. 28Due to the statistical nature of SPE sampling, not every memory operation will 29be sampled. 30 31OPTIONS 32------- 33<command>...:: 34 Any command you can specify in a shell. 35 36-i:: 37--input=<file>:: 38 Input file name. 39 40-f:: 41--force:: 42 Don't do ownership validation 43 44-t:: 45--type=<type>:: 46 Select the memory operation type: load or store (default: load,store) 47 48-D:: 49--dump-raw-samples:: 50 Dump the raw decoded samples on the screen in a format that is easy to parse with 51 one sample per line. 52 53-x:: 54--field-separator=<separator>:: 55 Specify the field separator used when dump raw samples (-D option). By default, 56 The separator is the space character. 57 58-C:: 59--cpu=<cpu>:: 60 Monitor only on the list of CPUs provided. Multiple CPUs can be provided as a 61 comma-separated list with no space: 0,1. Ranges of CPUs are specified with -: 0-2. Default 62 is to monitor all CPUS. 63-U:: 64--hide-unresolved:: 65 Only display entries resolved to a symbol. 66 67-p:: 68--phys-data:: 69 Record/Report sample physical addresses 70 71--data-page-size:: 72 Record/Report sample data address page size 73 74RECORD OPTIONS 75-------------- 76-e:: 77--event <event>:: 78 Event selector. Use 'perf mem record -e list' to list available events. 79 80-K:: 81--all-kernel:: 82 Configure all used events to run in kernel space. 83 84-U:: 85--all-user:: 86 Configure all used events to run in user space. 87 88-v:: 89--verbose:: 90 Be more verbose (show counter open errors, etc) 91 92--ldlat <n>:: 93 Specify desired latency for loads event. Supported on Intel and Arm64 94 processors only. Ignored on other archs. 95 96In addition, for report all perf report options are valid, and for record 97all perf record options. 98 99SEE ALSO 100-------- 101linkperf:perf-record[1], linkperf:perf-report[1], linkperf:perf-arm-spe[1] 102