1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Scarlett Driver for ALSA 4 * 5 * Copyright (c) 2013 by Tobias Hoffmann 6 * Copyright (c) 2013 by Robin Gareus <robin at gareus.org> 7 * Copyright (c) 2002 by Takashi Iwai <tiwai at suse.de> 8 * Copyright (c) 2014 by Chris J Arges <chris.j.arges at canonical.com> 9 * 10 * Many codes borrowed from audio.c by 11 * Alan Cox (alan at lxorguk.ukuu.org.uk) 12 * Thomas Sailer (sailer at ife.ee.ethz.ch) 13 * 14 * Code cleanup: 15 * David Henningsson <david.henningsson at canonical.com> 16 */ 17 18 /* 19 * Rewritten and extended to support more models, e.g. Scarlett 18i8. 20 * 21 * Auto-detection via UAC2 is not feasible to properly discover the vast 22 * majority of features. It's related to both Linux/ALSA's UAC2 as well as 23 * Focusrite's implementation of it. Eventually quirks may be sufficient but 24 * right now it's a major headache to work around these things. 25 * 26 * NB. Neither the OSX nor the win driver provided by Focusrite performs 27 * discovery, they seem to operate the same as this driver. 28 */ 29 30 /* Mixer Interface for the Focusrite Scarlett 18i6 audio interface. 31 * 32 * The protocol was reverse engineered by looking at communication between 33 * Scarlett MixControl (v 1.2.128.0) and the Focusrite(R) Scarlett 18i6 34 * (firmware v305) using wireshark and usbmon in January 2013. 35 * Extended in July 2013. 36 * 37 * this mixer gives complete access to all features of the device: 38 * - change Impedance of inputs (Line-in, Mic / Instrument, Hi-Z) 39 * - select clock source 40 * - dynamic input to mixer-matrix assignment 41 * - 18 x 6 mixer-matrix gain stages 42 * - bus routing & volume control 43 * - automatic re-initialization on connect if device was power-cycled 44 * 45 * USB URB commands overview (bRequest = 0x01 = UAC2_CS_CUR) 46 * wIndex 47 * 0x01 Analog Input line/instrument impedance switch, wValue=0x0901 + 48 * channel, data=Line/Inst (2bytes) 49 * pad (-10dB) switch, wValue=0x0b01 + channel, data=Off/On (2bytes) 50 * ?? wValue=0x0803/04, ?? (2bytes) 51 * 0x0a Master Volume, wValue=0x0200+bus[0:all + only 1..4?] data(2bytes) 52 * Bus Mute/Unmute wValue=0x0100+bus[0:all + only 1..4?], data(2bytes) 53 * 0x28 Clock source, wValue=0x0100, data={1:int,2:spdif,3:adat} (1byte) 54 * 0x29 Set Sample-rate, wValue=0x0100, data=sample-rate(4bytes) 55 * 0x32 Mixer mux, wValue=0x0600 + mixer-channel, data=input-to-connect(2bytes) 56 * 0x33 Output mux, wValue=bus, data=input-to-connect(2bytes) 57 * 0x34 Capture mux, wValue=0...18, data=input-to-connect(2bytes) 58 * 0x3c Matrix Mixer gains, wValue=mixer-node data=gain(2bytes) 59 * ?? [sometimes](4bytes, e.g 0x000003be 0x000003bf ...03ff) 60 * 61 * USB reads: (i.e. actually issued by original software) 62 * 0x01 wValue=0x0901+channel (1byte!!), wValue=0x0b01+channed (1byte!!) 63 * 0x29 wValue=0x0100 sample-rate(4bytes) 64 * wValue=0x0200 ?? 1byte (only once) 65 * 0x2a wValue=0x0100 ?? 4bytes, sample-rate2 ?? 66 * 67 * USB reads with bRequest = 0x03 = UAC2_CS_MEM 68 * 0x3c wValue=0x0002 1byte: sync status (locked=1) 69 * wValue=0x0000 18*2byte: peak meter (inputs) 70 * wValue=0x0001 8(?)*2byte: peak meter (mix) 71 * wValue=0x0003 6*2byte: peak meter (pcm/daw) 72 * 73 * USB write with bRequest = 0x03 74 * 0x3c Save settings to hardware: wValue=0x005a, data=0xa5 75 * 76 * 77 * <ditaa> 78 * /--------------\ 18chn 6chn /--------------\ 79 * | Hardware in +--+-------\ /------+--+ ALSA PCM out | 80 * \--------------/ | | | | \--------------/ 81 * | | | | 82 * | v v | 83 * | +---------------+ | 84 * | \ Matrix Mux / | 85 * | +-----+-----+ | 86 * | | | 87 * | | 18chn | 88 * | v | 89 * | +-----------+ | 90 * | | Mixer | | 91 * | | Matrix | | 92 * | | | | 93 * | | 18x6 Gain | | 94 * | | stages | | 95 * | +-----+-----+ | 96 * | | | 97 * | | | 98 * | 18chn | 6chn | 6chn 99 * v v v 100 * ========================= 101 * +---------------+ +--—------------+ 102 * \ Output Mux / \ Capture Mux / 103 * +-----+-----+ +-----+-----+ 104 * | | 105 * | 6chn | 106 * v | 107 * +-------------+ | 108 * | Master Gain | | 109 * +------+------+ | 110 * | | 111 * | 6chn | 18chn 112 * | (3 stereo pairs) | 113 * /--------------\ | | /--------------\ 114 * | Hardware out |<--/ \-->| ALSA PCM in | 115 * \--------------/ \--------------/ 116 * </ditaa> 117 * 118 */ 119 120 #include <linux/slab.h> 121 #include <linux/usb.h> 122 #include <linux/usb/audio-v2.h> 123 124 #include <sound/core.h> 125 #include <sound/control.h> 126 #include <sound/tlv.h> 127 128 #include "usbaudio.h" 129 #include "mixer.h" 130 #include "helper.h" 131 #include "power.h" 132 133 #include "mixer_scarlett.h" 134 135 /* some gui mixers can't handle negative ctl values */ 136 #define SND_SCARLETT_LEVEL_BIAS 128 137 #define SND_SCARLETT_MATRIX_IN_MAX 18 138 #define SND_SCARLETT_CONTROLS_MAX 10 139 #define SND_SCARLETT_OFFSETS_MAX 5 140 141 enum { 142 SCARLETT_OUTPUTS, 143 SCARLETT_SWITCH_IMPEDANCE, 144 SCARLETT_SWITCH_PAD, 145 SCARLETT_SWITCH_GAIN, 146 }; 147 148 enum { 149 SCARLETT_OFFSET_PCM = 0, 150 SCARLETT_OFFSET_ANALOG = 1, 151 SCARLETT_OFFSET_SPDIF = 2, 152 SCARLETT_OFFSET_ADAT = 3, 153 SCARLETT_OFFSET_MIX = 4, 154 }; 155 156 struct scarlett_mixer_elem_enum_info { 157 int start; 158 int len; 159 int offsets[SND_SCARLETT_OFFSETS_MAX]; 160 char const * const *names; 161 }; 162 163 struct scarlett_mixer_control { 164 unsigned char num; 165 unsigned char type; 166 const char *name; 167 }; 168 169 struct scarlett_device_info { 170 int matrix_in; 171 int matrix_out; 172 int input_len; 173 int output_len; 174 175 struct scarlett_mixer_elem_enum_info opt_master; 176 struct scarlett_mixer_elem_enum_info opt_matrix; 177 178 /* initial values for matrix mux */ 179 int matrix_mux_init[SND_SCARLETT_MATRIX_IN_MAX]; 180 181 int num_controls; /* number of items in controls */ 182 const struct scarlett_mixer_control controls[SND_SCARLETT_CONTROLS_MAX]; 183 }; 184 185 /********************** Enum Strings *************************/ 186 187 static const struct scarlett_mixer_elem_enum_info opt_pad = { 188 .start = 0, 189 .len = 2, 190 .offsets = {}, 191 .names = (char const * const []){ 192 "0dB", "-10dB" 193 } 194 }; 195 196 static const struct scarlett_mixer_elem_enum_info opt_gain = { 197 .start = 0, 198 .len = 2, 199 .offsets = {}, 200 .names = (char const * const []){ 201 "Lo", "Hi" 202 } 203 }; 204 205 static const struct scarlett_mixer_elem_enum_info opt_impedance = { 206 .start = 0, 207 .len = 2, 208 .offsets = {}, 209 .names = (char const * const []){ 210 "Line", "Hi-Z" 211 } 212 }; 213 214 static const struct scarlett_mixer_elem_enum_info opt_clock = { 215 .start = 1, 216 .len = 3, 217 .offsets = {}, 218 .names = (char const * const []){ 219 "Internal", "SPDIF", "ADAT" 220 } 221 }; 222 223 static const struct scarlett_mixer_elem_enum_info opt_sync = { 224 .start = 0, 225 .len = 2, 226 .offsets = {}, 227 .names = (char const * const []){ 228 "No Lock", "Locked" 229 } 230 }; 231 232 static int scarlett_ctl_switch_info(struct snd_kcontrol *kctl, 233 struct snd_ctl_elem_info *uinfo) 234 { 235 struct usb_mixer_elem_info *elem = kctl->private_data; 236 237 uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; 238 uinfo->count = elem->channels; 239 uinfo->value.integer.min = 0; 240 uinfo->value.integer.max = 1; 241 return 0; 242 } 243 244 static int scarlett_ctl_switch_get(struct snd_kcontrol *kctl, 245 struct snd_ctl_elem_value *ucontrol) 246 { 247 struct usb_mixer_elem_info *elem = kctl->private_data; 248 int i, err, val; 249 250 for (i = 0; i < elem->channels; i++) { 251 err = snd_usb_get_cur_mix_value(elem, i, i, &val); 252 if (err < 0) 253 return err; 254 255 val = !val; /* invert mute logic for mixer */ 256 ucontrol->value.integer.value[i] = val; 257 } 258 259 return 0; 260 } 261 262 static int scarlett_ctl_switch_put(struct snd_kcontrol *kctl, 263 struct snd_ctl_elem_value *ucontrol) 264 { 265 struct usb_mixer_elem_info *elem = kctl->private_data; 266 int i, changed = 0; 267 int err, oval, val; 268 269 for (i = 0; i < elem->channels; i++) { 270 err = snd_usb_get_cur_mix_value(elem, i, i, &oval); 271 if (err < 0) 272 return err; 273 274 val = ucontrol->value.integer.value[i]; 275 val = !val; 276 if (oval != val) { 277 err = snd_usb_set_cur_mix_value(elem, i, i, val); 278 if (err < 0) 279 return err; 280 281 changed = 1; 282 } 283 } 284 285 return changed; 286 } 287 288 static int scarlett_ctl_resume(struct usb_mixer_elem_list *list) 289 { 290 struct usb_mixer_elem_info *elem = mixer_elem_list_to_info(list); 291 int i; 292 293 for (i = 0; i < elem->channels; i++) 294 if (elem->cached & (1 << i)) 295 snd_usb_set_cur_mix_value(elem, i, i, 296 elem->cache_val[i]); 297 return 0; 298 } 299 300 static int scarlett_ctl_info(struct snd_kcontrol *kctl, 301 struct snd_ctl_elem_info *uinfo) 302 { 303 struct usb_mixer_elem_info *elem = kctl->private_data; 304 305 uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; 306 uinfo->count = elem->channels; 307 uinfo->value.integer.min = 0; 308 uinfo->value.integer.max = (int)kctl->private_value + 309 SND_SCARLETT_LEVEL_BIAS; 310 uinfo->value.integer.step = 1; 311 return 0; 312 } 313 314 static int scarlett_ctl_get(struct snd_kcontrol *kctl, 315 struct snd_ctl_elem_value *ucontrol) 316 { 317 struct usb_mixer_elem_info *elem = kctl->private_data; 318 int i, err, val; 319 320 for (i = 0; i < elem->channels; i++) { 321 err = snd_usb_get_cur_mix_value(elem, i, i, &val); 322 if (err < 0) 323 return err; 324 325 val = clamp(val / 256, -128, (int)kctl->private_value) + 326 SND_SCARLETT_LEVEL_BIAS; 327 ucontrol->value.integer.value[i] = val; 328 } 329 330 return 0; 331 } 332 333 static int scarlett_ctl_put(struct snd_kcontrol *kctl, 334 struct snd_ctl_elem_value *ucontrol) 335 { 336 struct usb_mixer_elem_info *elem = kctl->private_data; 337 int i, changed = 0; 338 int err, oval, val; 339 340 for (i = 0; i < elem->channels; i++) { 341 err = snd_usb_get_cur_mix_value(elem, i, i, &oval); 342 if (err < 0) 343 return err; 344 345 val = ucontrol->value.integer.value[i] - 346 SND_SCARLETT_LEVEL_BIAS; 347 val = val * 256; 348 if (oval != val) { 349 err = snd_usb_set_cur_mix_value(elem, i, i, val); 350 if (err < 0) 351 return err; 352 353 changed = 1; 354 } 355 } 356 357 return changed; 358 } 359 360 static void scarlett_generate_name(int i, char *dst, size_t size, int offsets[]) 361 { 362 if (i > offsets[SCARLETT_OFFSET_MIX]) 363 scnprintf(dst, size, "Mix %c", 364 'A'+(i - offsets[SCARLETT_OFFSET_MIX] - 1)); 365 else if (i > offsets[SCARLETT_OFFSET_ADAT]) 366 scnprintf(dst, size, "ADAT %d", i - offsets[SCARLETT_OFFSET_ADAT]); 367 else if (i > offsets[SCARLETT_OFFSET_SPDIF]) 368 scnprintf(dst, size, "SPDIF %d", i - offsets[SCARLETT_OFFSET_SPDIF]); 369 else if (i > offsets[SCARLETT_OFFSET_ANALOG]) 370 scnprintf(dst, size, "Analog %d", i - offsets[SCARLETT_OFFSET_ANALOG]); 371 else if (i > offsets[SCARLETT_OFFSET_PCM]) 372 scnprintf(dst, size, "PCM %d", i - offsets[SCARLETT_OFFSET_PCM]); 373 else 374 scnprintf(dst, size, "Off"); 375 } 376 377 static int scarlett_ctl_enum_dynamic_info(struct snd_kcontrol *kctl, 378 struct snd_ctl_elem_info *uinfo) 379 { 380 struct usb_mixer_elem_info *elem = kctl->private_data; 381 struct scarlett_mixer_elem_enum_info *opt = elem->private_data; 382 unsigned int items = opt->len; 383 384 uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; 385 uinfo->count = elem->channels; 386 uinfo->value.enumerated.items = items; 387 388 if (uinfo->value.enumerated.item >= items) 389 uinfo->value.enumerated.item = items - 1; 390 391 /* generate name dynamically based on item number and offset info */ 392 scarlett_generate_name(uinfo->value.enumerated.item, 393 uinfo->value.enumerated.name, 394 sizeof(uinfo->value.enumerated.name), 395 opt->offsets); 396 397 return 0; 398 } 399 400 static int scarlett_ctl_enum_info(struct snd_kcontrol *kctl, 401 struct snd_ctl_elem_info *uinfo) 402 { 403 struct usb_mixer_elem_info *elem = kctl->private_data; 404 struct scarlett_mixer_elem_enum_info *opt = elem->private_data; 405 406 return snd_ctl_enum_info(uinfo, elem->channels, opt->len, 407 (const char * const *)opt->names); 408 } 409 410 static int scarlett_ctl_enum_get(struct snd_kcontrol *kctl, 411 struct snd_ctl_elem_value *ucontrol) 412 { 413 struct usb_mixer_elem_info *elem = kctl->private_data; 414 struct scarlett_mixer_elem_enum_info *opt = elem->private_data; 415 int err, val; 416 417 err = snd_usb_get_cur_mix_value(elem, 0, 0, &val); 418 if (err < 0) 419 return err; 420 421 val = clamp(val - opt->start, 0, opt->len-1); 422 423 ucontrol->value.enumerated.item[0] = val; 424 425 return 0; 426 } 427 428 static int scarlett_ctl_enum_put(struct snd_kcontrol *kctl, 429 struct snd_ctl_elem_value *ucontrol) 430 { 431 struct usb_mixer_elem_info *elem = kctl->private_data; 432 struct scarlett_mixer_elem_enum_info *opt = elem->private_data; 433 int err, oval, val; 434 435 err = snd_usb_get_cur_mix_value(elem, 0, 0, &oval); 436 if (err < 0) 437 return err; 438 439 val = ucontrol->value.integer.value[0]; 440 val = val + opt->start; 441 if (val != oval) { 442 snd_usb_set_cur_mix_value(elem, 0, 0, val); 443 return 1; 444 } 445 return 0; 446 } 447 448 static int scarlett_ctl_enum_resume(struct usb_mixer_elem_list *list) 449 { 450 struct usb_mixer_elem_info *elem = mixer_elem_list_to_info(list); 451 452 if (elem->cached) 453 snd_usb_set_cur_mix_value(elem, 0, 0, *elem->cache_val); 454 return 0; 455 } 456 457 static int scarlett_ctl_meter_get(struct snd_kcontrol *kctl, 458 struct snd_ctl_elem_value *ucontrol) 459 { 460 struct usb_mixer_elem_info *elem = kctl->private_data; 461 struct snd_usb_audio *chip = elem->head.mixer->chip; 462 unsigned char buf[2 * MAX_CHANNELS] = {0, }; 463 int wValue = (elem->control << 8) | elem->idx_off; 464 int idx = snd_usb_ctrl_intf(elem->head.mixer->hostif) | (elem->head.id << 8); 465 int err; 466 467 err = snd_usb_ctl_msg(chip->dev, 468 usb_rcvctrlpipe(chip->dev, 0), 469 UAC2_CS_MEM, 470 USB_RECIP_INTERFACE | USB_TYPE_CLASS | 471 USB_DIR_IN, wValue, idx, buf, elem->channels); 472 if (err < 0) 473 return err; 474 475 ucontrol->value.enumerated.item[0] = clamp((int)buf[0], 0, 1); 476 return 0; 477 } 478 479 static const struct snd_kcontrol_new usb_scarlett_ctl_switch = { 480 .iface = SNDRV_CTL_ELEM_IFACE_MIXER, 481 .name = "", 482 .info = scarlett_ctl_switch_info, 483 .get = scarlett_ctl_switch_get, 484 .put = scarlett_ctl_switch_put, 485 }; 486 487 static const DECLARE_TLV_DB_SCALE(db_scale_scarlett_gain, -12800, 100, 0); 488 489 static const struct snd_kcontrol_new usb_scarlett_ctl = { 490 .iface = SNDRV_CTL_ELEM_IFACE_MIXER, 491 .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | 492 SNDRV_CTL_ELEM_ACCESS_TLV_READ, 493 .name = "", 494 .info = scarlett_ctl_info, 495 .get = scarlett_ctl_get, 496 .put = scarlett_ctl_put, 497 .private_value = 6, /* max value */ 498 .tlv = { .p = db_scale_scarlett_gain } 499 }; 500 501 static const struct snd_kcontrol_new usb_scarlett_ctl_master = { 502 .iface = SNDRV_CTL_ELEM_IFACE_MIXER, 503 .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | 504 SNDRV_CTL_ELEM_ACCESS_TLV_READ, 505 .name = "", 506 .info = scarlett_ctl_info, 507 .get = scarlett_ctl_get, 508 .put = scarlett_ctl_put, 509 .private_value = 6, /* max value */ 510 .tlv = { .p = db_scale_scarlett_gain } 511 }; 512 513 static const struct snd_kcontrol_new usb_scarlett_ctl_enum = { 514 .iface = SNDRV_CTL_ELEM_IFACE_MIXER, 515 .name = "", 516 .info = scarlett_ctl_enum_info, 517 .get = scarlett_ctl_enum_get, 518 .put = scarlett_ctl_enum_put, 519 }; 520 521 static const struct snd_kcontrol_new usb_scarlett_ctl_dynamic_enum = { 522 .iface = SNDRV_CTL_ELEM_IFACE_MIXER, 523 .name = "", 524 .info = scarlett_ctl_enum_dynamic_info, 525 .get = scarlett_ctl_enum_get, 526 .put = scarlett_ctl_enum_put, 527 }; 528 529 static const struct snd_kcontrol_new usb_scarlett_ctl_sync = { 530 .iface = SNDRV_CTL_ELEM_IFACE_MIXER, 531 .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE, 532 .name = "", 533 .info = scarlett_ctl_enum_info, 534 .get = scarlett_ctl_meter_get, 535 }; 536 537 static int add_new_ctl(struct usb_mixer_interface *mixer, 538 const struct snd_kcontrol_new *ncontrol, 539 usb_mixer_elem_resume_func_t resume, 540 int index, int offset, int num, 541 int val_type, int channels, const char *name, 542 const struct scarlett_mixer_elem_enum_info *opt, 543 struct usb_mixer_elem_info **elem_ret 544 ) 545 { 546 struct snd_kcontrol *kctl; 547 struct usb_mixer_elem_info *elem; 548 int err; 549 550 elem = kzalloc(sizeof(*elem), GFP_KERNEL); 551 if (!elem) 552 return -ENOMEM; 553 554 elem->head.mixer = mixer; 555 elem->head.resume = resume; 556 elem->control = offset; 557 elem->idx_off = num; 558 elem->head.id = index; 559 elem->val_type = val_type; 560 561 elem->channels = channels; 562 563 /* add scarlett_mixer_elem_enum_info struct */ 564 elem->private_data = (void *)opt; 565 566 kctl = snd_ctl_new1(ncontrol, elem); 567 if (!kctl) { 568 kfree(elem); 569 return -ENOMEM; 570 } 571 kctl->private_free = snd_usb_mixer_elem_free; 572 573 strscpy(kctl->id.name, name, sizeof(kctl->id.name)); 574 575 err = snd_usb_mixer_add_control(&elem->head, kctl); 576 if (err < 0) 577 return err; 578 579 if (elem_ret) 580 *elem_ret = elem; 581 582 return 0; 583 } 584 585 static int add_output_ctls(struct usb_mixer_interface *mixer, 586 int index, const char *name, 587 const struct scarlett_device_info *info) 588 { 589 int err; 590 char mx[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; 591 struct usb_mixer_elem_info *elem; 592 593 /* Add mute switch */ 594 snprintf(mx, sizeof(mx), "Master %d (%s) Playback Switch", 595 index + 1, name); 596 err = add_new_ctl(mixer, &usb_scarlett_ctl_switch, 597 scarlett_ctl_resume, 0x0a, 0x01, 598 2*index+1, USB_MIXER_S16, 2, mx, NULL, &elem); 599 if (err < 0) 600 return err; 601 602 /* Add volume control and initialize to 0 */ 603 snprintf(mx, sizeof(mx), "Master %d (%s) Playback Volume", 604 index + 1, name); 605 err = add_new_ctl(mixer, &usb_scarlett_ctl_master, 606 scarlett_ctl_resume, 0x0a, 0x02, 607 2*index+1, USB_MIXER_S16, 2, mx, NULL, &elem); 608 if (err < 0) 609 return err; 610 611 /* Add L channel source playback enumeration */ 612 snprintf(mx, sizeof(mx), "Master %dL (%s) Source Playback Enum", 613 index + 1, name); 614 err = add_new_ctl(mixer, &usb_scarlett_ctl_dynamic_enum, 615 scarlett_ctl_enum_resume, 0x33, 0x00, 616 2*index, USB_MIXER_S16, 1, mx, &info->opt_master, 617 &elem); 618 if (err < 0) 619 return err; 620 621 /* Add R channel source playback enumeration */ 622 snprintf(mx, sizeof(mx), "Master %dR (%s) Source Playback Enum", 623 index + 1, name); 624 err = add_new_ctl(mixer, &usb_scarlett_ctl_dynamic_enum, 625 scarlett_ctl_enum_resume, 0x33, 0x00, 626 2*index+1, USB_MIXER_S16, 1, mx, &info->opt_master, 627 &elem); 628 if (err < 0) 629 return err; 630 631 return 0; 632 } 633 634 /********************** device-specific config *************************/ 635 636 /* untested... */ 637 static const struct scarlett_device_info s6i6_info = { 638 .matrix_in = 18, 639 .matrix_out = 8, 640 .input_len = 6, 641 .output_len = 6, 642 643 .opt_master = { 644 .start = -1, 645 .len = 27, 646 .offsets = {0, 12, 16, 18, 18}, 647 .names = NULL 648 }, 649 650 .opt_matrix = { 651 .start = -1, 652 .len = 19, 653 .offsets = {0, 12, 16, 18, 18}, 654 .names = NULL 655 }, 656 657 .num_controls = 9, 658 .controls = { 659 { .num = 0, .type = SCARLETT_OUTPUTS, .name = "Monitor" }, 660 { .num = 1, .type = SCARLETT_OUTPUTS, .name = "Headphone" }, 661 { .num = 2, .type = SCARLETT_OUTPUTS, .name = "SPDIF" }, 662 { .num = 1, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL}, 663 { .num = 1, .type = SCARLETT_SWITCH_PAD, .name = NULL}, 664 { .num = 2, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL}, 665 { .num = 2, .type = SCARLETT_SWITCH_PAD, .name = NULL}, 666 { .num = 3, .type = SCARLETT_SWITCH_GAIN, .name = NULL}, 667 { .num = 4, .type = SCARLETT_SWITCH_GAIN, .name = NULL}, 668 }, 669 670 .matrix_mux_init = { 671 12, 13, 14, 15, /* Analog -> 1..4 */ 672 16, 17, /* SPDIF -> 5,6 */ 673 0, 1, 2, 3, 4, 5, 6, 7, /* PCM[1..12] -> 7..18 */ 674 8, 9, 10, 11 675 } 676 }; 677 678 /* untested... */ 679 static const struct scarlett_device_info s8i6_info = { 680 .matrix_in = 18, 681 .matrix_out = 6, 682 .input_len = 8, 683 .output_len = 6, 684 685 .opt_master = { 686 .start = -1, 687 .len = 25, 688 .offsets = {0, 12, 16, 18, 18}, 689 .names = NULL 690 }, 691 692 .opt_matrix = { 693 .start = -1, 694 .len = 19, 695 .offsets = {0, 12, 16, 18, 18}, 696 .names = NULL 697 }, 698 699 .num_controls = 7, 700 .controls = { 701 { .num = 0, .type = SCARLETT_OUTPUTS, .name = "Monitor" }, 702 { .num = 1, .type = SCARLETT_OUTPUTS, .name = "Headphone" }, 703 { .num = 2, .type = SCARLETT_OUTPUTS, .name = "SPDIF" }, 704 { .num = 1, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL}, 705 { .num = 2, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL}, 706 { .num = 3, .type = SCARLETT_SWITCH_PAD, .name = NULL}, 707 { .num = 4, .type = SCARLETT_SWITCH_PAD, .name = NULL}, 708 }, 709 710 .matrix_mux_init = { 711 12, 13, 14, 15, /* Analog -> 1..4 */ 712 16, 17, /* SPDIF -> 5,6 */ 713 0, 1, 2, 3, 4, 5, 6, 7, /* PCM[1..12] -> 7..18 */ 714 8, 9, 10, 11 715 } 716 }; 717 718 static const struct scarlett_device_info s18i6_info = { 719 .matrix_in = 18, 720 .matrix_out = 6, 721 .input_len = 18, 722 .output_len = 6, 723 724 .opt_master = { 725 .start = -1, 726 .len = 31, 727 .offsets = {0, 6, 14, 16, 24}, 728 .names = NULL, 729 }, 730 731 .opt_matrix = { 732 .start = -1, 733 .len = 25, 734 .offsets = {0, 6, 14, 16, 24}, 735 .names = NULL, 736 }, 737 738 .num_controls = 5, 739 .controls = { 740 { .num = 0, .type = SCARLETT_OUTPUTS, .name = "Monitor" }, 741 { .num = 1, .type = SCARLETT_OUTPUTS, .name = "Headphone" }, 742 { .num = 2, .type = SCARLETT_OUTPUTS, .name = "SPDIF" }, 743 { .num = 1, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL}, 744 { .num = 2, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL}, 745 }, 746 747 .matrix_mux_init = { 748 6, 7, 8, 9, 10, 11, 12, 13, /* Analog -> 1..8 */ 749 16, 17, 18, 19, 20, 21, /* ADAT[1..6] -> 9..14 */ 750 14, 15, /* SPDIF -> 15,16 */ 751 0, 1 /* PCM[1,2] -> 17,18 */ 752 } 753 }; 754 755 static const struct scarlett_device_info s18i8_info = { 756 .matrix_in = 18, 757 .matrix_out = 8, 758 .input_len = 18, 759 .output_len = 8, 760 761 .opt_master = { 762 .start = -1, 763 .len = 35, 764 .offsets = {0, 8, 16, 18, 26}, 765 .names = NULL 766 }, 767 768 .opt_matrix = { 769 .start = -1, 770 .len = 27, 771 .offsets = {0, 8, 16, 18, 26}, 772 .names = NULL 773 }, 774 775 .num_controls = 10, 776 .controls = { 777 { .num = 0, .type = SCARLETT_OUTPUTS, .name = "Monitor" }, 778 { .num = 1, .type = SCARLETT_OUTPUTS, .name = "Headphone 1" }, 779 { .num = 2, .type = SCARLETT_OUTPUTS, .name = "Headphone 2" }, 780 { .num = 3, .type = SCARLETT_OUTPUTS, .name = "SPDIF" }, 781 { .num = 1, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL}, 782 { .num = 1, .type = SCARLETT_SWITCH_PAD, .name = NULL}, 783 { .num = 2, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL}, 784 { .num = 2, .type = SCARLETT_SWITCH_PAD, .name = NULL}, 785 { .num = 3, .type = SCARLETT_SWITCH_PAD, .name = NULL}, 786 { .num = 4, .type = SCARLETT_SWITCH_PAD, .name = NULL}, 787 }, 788 789 .matrix_mux_init = { 790 8, 9, 10, 11, 12, 13, 14, 15, /* Analog -> 1..8 */ 791 18, 19, 20, 21, 22, 23, /* ADAT[1..6] -> 9..14 */ 792 16, 17, /* SPDIF -> 15,16 */ 793 0, 1 /* PCM[1,2] -> 17,18 */ 794 } 795 }; 796 797 static const struct scarlett_device_info s18i20_info = { 798 .matrix_in = 18, 799 .matrix_out = 8, 800 .input_len = 18, 801 .output_len = 20, 802 803 .opt_master = { 804 .start = -1, 805 .len = 47, 806 .offsets = {0, 20, 28, 30, 38}, 807 .names = NULL 808 }, 809 810 .opt_matrix = { 811 .start = -1, 812 .len = 39, 813 .offsets = {0, 20, 28, 30, 38}, 814 .names = NULL 815 }, 816 817 .num_controls = 10, 818 .controls = { 819 { .num = 0, .type = SCARLETT_OUTPUTS, .name = "Monitor" }, 820 { .num = 1, .type = SCARLETT_OUTPUTS, .name = "Line 3/4" }, 821 { .num = 2, .type = SCARLETT_OUTPUTS, .name = "Line 5/6" }, 822 { .num = 3, .type = SCARLETT_OUTPUTS, .name = "Line 7/8" }, 823 { .num = 4, .type = SCARLETT_OUTPUTS, .name = "Line 9/10" }, 824 { .num = 5, .type = SCARLETT_OUTPUTS, .name = "SPDIF" }, 825 { .num = 6, .type = SCARLETT_OUTPUTS, .name = "ADAT 1/2" }, 826 { .num = 7, .type = SCARLETT_OUTPUTS, .name = "ADAT 3/4" }, 827 { .num = 8, .type = SCARLETT_OUTPUTS, .name = "ADAT 5/6" }, 828 { .num = 9, .type = SCARLETT_OUTPUTS, .name = "ADAT 7/8" }, 829 /*{ .num = 1, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL}, 830 { .num = 1, .type = SCARLETT_SWITCH_PAD, .name = NULL}, 831 { .num = 2, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL}, 832 { .num = 2, .type = SCARLETT_SWITCH_PAD, .name = NULL}, 833 { .num = 3, .type = SCARLETT_SWITCH_PAD, .name = NULL}, 834 { .num = 4, .type = SCARLETT_SWITCH_PAD, .name = NULL},*/ 835 }, 836 837 .matrix_mux_init = { 838 20, 21, 22, 23, 24, 25, 26, 27, /* Analog -> 1..8 */ 839 30, 31, 32, 33, 34, 35, /* ADAT[1..6] -> 9..14 */ 840 28, 29, /* SPDIF -> 15,16 */ 841 0, 1 /* PCM[1,2] -> 17,18 */ 842 } 843 }; 844 845 846 static int scarlett_controls_create_generic(struct usb_mixer_interface *mixer, 847 const struct scarlett_device_info *info) 848 { 849 int i, err; 850 char mx[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; 851 const struct scarlett_mixer_control *ctl; 852 struct usb_mixer_elem_info *elem; 853 854 /* create master switch and playback volume */ 855 err = add_new_ctl(mixer, &usb_scarlett_ctl_switch, 856 scarlett_ctl_resume, 0x0a, 0x01, 0, 857 USB_MIXER_S16, 1, "Master Playback Switch", NULL, 858 &elem); 859 if (err < 0) 860 return err; 861 862 err = add_new_ctl(mixer, &usb_scarlett_ctl_master, 863 scarlett_ctl_resume, 0x0a, 0x02, 0, 864 USB_MIXER_S16, 1, "Master Playback Volume", NULL, 865 &elem); 866 if (err < 0) 867 return err; 868 869 /* iterate through controls in info struct and create each one */ 870 for (i = 0; i < info->num_controls; i++) { 871 ctl = &info->controls[i]; 872 873 switch (ctl->type) { 874 case SCARLETT_OUTPUTS: 875 err = add_output_ctls(mixer, ctl->num, ctl->name, info); 876 if (err < 0) 877 return err; 878 break; 879 case SCARLETT_SWITCH_IMPEDANCE: 880 scnprintf(mx, sizeof(mx), 881 "Input %d Impedance Switch", ctl->num); 882 err = add_new_ctl(mixer, &usb_scarlett_ctl_enum, 883 scarlett_ctl_enum_resume, 0x01, 884 0x09, ctl->num, USB_MIXER_S16, 1, mx, 885 &opt_impedance, &elem); 886 if (err < 0) 887 return err; 888 break; 889 case SCARLETT_SWITCH_PAD: 890 scnprintf(mx, sizeof(mx), 891 "Input %d Pad Switch", ctl->num); 892 err = add_new_ctl(mixer, &usb_scarlett_ctl_enum, 893 scarlett_ctl_enum_resume, 0x01, 894 0x0b, ctl->num, USB_MIXER_S16, 1, mx, 895 &opt_pad, &elem); 896 if (err < 0) 897 return err; 898 break; 899 case SCARLETT_SWITCH_GAIN: 900 scnprintf(mx, sizeof(mx), 901 "Input %d Gain Switch", ctl->num); 902 err = add_new_ctl(mixer, &usb_scarlett_ctl_enum, 903 scarlett_ctl_enum_resume, 0x01, 904 0x08, ctl->num, USB_MIXER_S16, 1, mx, 905 &opt_gain, &elem); 906 if (err < 0) 907 return err; 908 break; 909 } 910 } 911 912 return 0; 913 } 914 915 /* 916 * Create and initialize a mixer for the Focusrite(R) Scarlett 917 */ 918 int snd_scarlett_controls_create(struct usb_mixer_interface *mixer) 919 { 920 int err, i, o; 921 char mx[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; 922 const struct scarlett_device_info *info; 923 struct usb_mixer_elem_info *elem; 924 static char sample_rate_buffer[4] = { '\x80', '\xbb', '\x00', '\x00' }; 925 926 /* only use UAC_VERSION_2 */ 927 if (!mixer->protocol) 928 return 0; 929 930 switch (mixer->chip->usb_id) { 931 case USB_ID(0x1235, 0x8012): 932 info = &s6i6_info; 933 break; 934 case USB_ID(0x1235, 0x8002): 935 info = &s8i6_info; 936 break; 937 case USB_ID(0x1235, 0x8004): 938 info = &s18i6_info; 939 break; 940 case USB_ID(0x1235, 0x8014): 941 info = &s18i8_info; 942 break; 943 case USB_ID(0x1235, 0x800c): 944 info = &s18i20_info; 945 break; 946 default: /* device not (yet) supported */ 947 return -EINVAL; 948 } 949 950 /* generic function to create controls */ 951 err = scarlett_controls_create_generic(mixer, info); 952 if (err < 0) 953 return err; 954 955 /* setup matrix controls */ 956 for (i = 0; i < info->matrix_in; i++) { 957 snprintf(mx, sizeof(mx), "Matrix %02d Input Playback Route", 958 i+1); 959 err = add_new_ctl(mixer, &usb_scarlett_ctl_dynamic_enum, 960 scarlett_ctl_enum_resume, 0x32, 961 0x06, i, USB_MIXER_S16, 1, mx, 962 &info->opt_matrix, &elem); 963 if (err < 0) 964 return err; 965 966 for (o = 0; o < info->matrix_out; o++) { 967 scnprintf(mx, sizeof(mx), 968 "Matrix %02d Mix %c Playback Volume", i+1, 969 o+'A'); 970 err = add_new_ctl(mixer, &usb_scarlett_ctl, 971 scarlett_ctl_resume, 0x3c, 0x00, 972 (i << 3) + (o & 0x07), USB_MIXER_S16, 973 1, mx, NULL, &elem); 974 if (err < 0) 975 return err; 976 977 } 978 } 979 980 for (i = 0; i < info->input_len; i++) { 981 snprintf(mx, sizeof(mx), "Input Source %02d Capture Route", 982 i+1); 983 err = add_new_ctl(mixer, &usb_scarlett_ctl_dynamic_enum, 984 scarlett_ctl_enum_resume, 0x34, 985 0x00, i, USB_MIXER_S16, 1, mx, 986 &info->opt_master, &elem); 987 if (err < 0) 988 return err; 989 } 990 991 /* val_len == 1 needed here */ 992 err = add_new_ctl(mixer, &usb_scarlett_ctl_enum, 993 scarlett_ctl_enum_resume, 0x28, 0x01, 0, 994 USB_MIXER_U8, 1, "Sample Clock Source", 995 &opt_clock, &elem); 996 if (err < 0) 997 return err; 998 999 /* val_len == 1 and UAC2_CS_MEM */ 1000 err = add_new_ctl(mixer, &usb_scarlett_ctl_sync, NULL, 0x3c, 0x00, 2, 1001 USB_MIXER_U8, 1, "Sample Clock Sync Status", 1002 &opt_sync, &elem); 1003 if (err < 0) 1004 return err; 1005 1006 /* initialize sampling rate to 48000 */ 1007 err = snd_usb_ctl_msg(mixer->chip->dev, 1008 usb_sndctrlpipe(mixer->chip->dev, 0), UAC2_CS_CUR, 1009 USB_RECIP_INTERFACE | USB_TYPE_CLASS | 1010 USB_DIR_OUT, 0x0100, snd_usb_ctrl_intf(mixer->hostif) | 1011 (0x29 << 8), sample_rate_buffer, 4); 1012 if (err < 0) 1013 return err; 1014 1015 return err; 1016 } 1017