1 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) 2 // 3 // This file is provided under a dual BSD/GPLv2 license. When using or 4 // redistributing this file, you may do so under either license. 5 // 6 // Copyright(c) 2018-2022 Intel Corporation. All rights reserved. 7 // 8 9 #include <linux/delay.h> 10 #include <linux/device.h> 11 #include <linux/dma-mapping.h> 12 #include <linux/firmware.h> 13 #include <linux/fs.h> 14 #include <linux/interrupt.h> 15 #include <linux/mm.h> 16 #include <linux/module.h> 17 #include <linux/pci.h> 18 #include <linux/slab.h> 19 #include <sound/hdaudio_ext.h> 20 #include <sound/sof.h> 21 #include <sound/pcm_params.h> 22 23 #include "../sof-priv.h" 24 #include "../ops.h" 25 #include "hda.h" 26 27 #define HDA_SKL_WAIT_TIMEOUT 500 /* 500 msec */ 28 #define HDA_SKL_CLDMA_MAX_BUFFER_SIZE (32 * PAGE_SIZE) 29 30 /* Stream Reset */ 31 #define HDA_CL_SD_CTL_SRST_SHIFT 0 32 #define HDA_CL_SD_CTL_SRST(x) (((x) & 0x1) << \ 33 HDA_CL_SD_CTL_SRST_SHIFT) 34 35 /* Stream Run */ 36 #define HDA_CL_SD_CTL_RUN_SHIFT 1 37 #define HDA_CL_SD_CTL_RUN(x) (((x) & 0x1) << \ 38 HDA_CL_SD_CTL_RUN_SHIFT) 39 40 /* Interrupt On Completion Enable */ 41 #define HDA_CL_SD_CTL_IOCE_SHIFT 2 42 #define HDA_CL_SD_CTL_IOCE(x) (((x) & 0x1) << \ 43 HDA_CL_SD_CTL_IOCE_SHIFT) 44 45 /* FIFO Error Interrupt Enable */ 46 #define HDA_CL_SD_CTL_FEIE_SHIFT 3 47 #define HDA_CL_SD_CTL_FEIE(x) (((x) & 0x1) << \ 48 HDA_CL_SD_CTL_FEIE_SHIFT) 49 50 /* Descriptor Error Interrupt Enable */ 51 #define HDA_CL_SD_CTL_DEIE_SHIFT 4 52 #define HDA_CL_SD_CTL_DEIE(x) (((x) & 0x1) << \ 53 HDA_CL_SD_CTL_DEIE_SHIFT) 54 55 /* FIFO Limit Change */ 56 #define HDA_CL_SD_CTL_FIFOLC_SHIFT 5 57 #define HDA_CL_SD_CTL_FIFOLC(x) (((x) & 0x1) << \ 58 HDA_CL_SD_CTL_FIFOLC_SHIFT) 59 60 /* Stripe Control */ 61 #define HDA_CL_SD_CTL_STRIPE_SHIFT 16 62 #define HDA_CL_SD_CTL_STRIPE(x) (((x) & 0x3) << \ 63 HDA_CL_SD_CTL_STRIPE_SHIFT) 64 65 /* Traffic Priority */ 66 #define HDA_CL_SD_CTL_TP_SHIFT 18 67 #define HDA_CL_SD_CTL_TP(x) (((x) & 0x1) << \ 68 HDA_CL_SD_CTL_TP_SHIFT) 69 70 /* Bidirectional Direction Control */ 71 #define HDA_CL_SD_CTL_DIR_SHIFT 19 72 #define HDA_CL_SD_CTL_DIR(x) (((x) & 0x1) << \ 73 HDA_CL_SD_CTL_DIR_SHIFT) 74 75 /* Stream Number */ 76 #define HDA_CL_SD_CTL_STRM_SHIFT 20 77 #define HDA_CL_SD_CTL_STRM(x) (((x) & 0xf) << \ 78 HDA_CL_SD_CTL_STRM_SHIFT) 79 80 #define HDA_CL_SD_CTL_INT(x) \ 81 (HDA_CL_SD_CTL_IOCE(x) | \ 82 HDA_CL_SD_CTL_FEIE(x) | \ 83 HDA_CL_SD_CTL_DEIE(x)) 84 85 #define HDA_CL_SD_CTL_INT_MASK \ 86 (HDA_CL_SD_CTL_IOCE(1) | \ 87 HDA_CL_SD_CTL_FEIE(1) | \ 88 HDA_CL_SD_CTL_DEIE(1)) 89 90 #define DMA_ADDRESS_128_BITS_ALIGNMENT 7 91 #define BDL_ALIGN(x) ((x) >> DMA_ADDRESS_128_BITS_ALIGNMENT) 92 93 /* Buffer Descriptor List Lower Base Address */ 94 #define HDA_CL_SD_BDLPLBA_SHIFT 7 95 #define HDA_CL_SD_BDLPLBA_MASK GENMASK(31, 7) 96 #define HDA_CL_SD_BDLPLBA(x) \ 97 ((BDL_ALIGN(lower_32_bits(x)) << HDA_CL_SD_BDLPLBA_SHIFT) & \ 98 HDA_CL_SD_BDLPLBA_MASK) 99 100 /* Buffer Descriptor List Upper Base Address */ 101 #define HDA_CL_SD_BDLPUBA(x) \ 102 (upper_32_bits(x)) 103 104 /* Software Position in Buffer Enable */ 105 #define HDA_CL_SPBFIFO_SPBFCCTL_SPIBE_SHIFT 0 106 #define HDA_CL_SPBFIFO_SPBFCCTL_SPIBE_MASK \ 107 (1 << HDA_CL_SPBFIFO_SPBFCCTL_SPIBE_SHIFT) 108 109 #define HDA_CL_SPBFIFO_SPBFCCTL_SPIBE(x) \ 110 (((x) << HDA_CL_SPBFIFO_SPBFCCTL_SPIBE_SHIFT) & \ 111 HDA_CL_SPBFIFO_SPBFCCTL_SPIBE_MASK) 112 113 #define HDA_CL_DMA_SD_INT_COMPLETE 0x4 114 115 static int cl_skl_cldma_setup_bdle(struct snd_sof_dev *sdev, 116 struct snd_dma_buffer *dmab_data, 117 __le32 **bdlp, int size, int with_ioc) 118 { 119 phys_addr_t addr = virt_to_phys(dmab_data->area); 120 __le32 *bdl = *bdlp; 121 122 /* 123 * This code is simplified by using one fragment of physical memory and assuming 124 * all the code fits. This could be improved with scatter-gather but the firmware 125 * size is limited by DSP memory anyways 126 */ 127 bdl[0] = cpu_to_le32(lower_32_bits(addr)); 128 bdl[1] = cpu_to_le32(upper_32_bits(addr)); 129 bdl[2] = cpu_to_le32(size); 130 bdl[3] = (!with_ioc) ? 0 : cpu_to_le32(0x01); 131 132 return 1; /* one fragment */ 133 } 134 135 static void cl_skl_cldma_stream_run(struct snd_sof_dev *sdev, bool enable) 136 { 137 int sd_offset = SOF_HDA_ADSP_LOADER_BASE; 138 unsigned char val; 139 int retries; 140 u32 run = enable ? 0x1 : 0; 141 142 snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, 143 sd_offset + SOF_HDA_ADSP_REG_SD_CTL, 144 HDA_CL_SD_CTL_RUN(1), HDA_CL_SD_CTL_RUN(run)); 145 146 retries = 300; 147 do { 148 udelay(3); 149 150 /* waiting for hardware to report the stream Run bit set */ 151 val = snd_sof_dsp_read(sdev, HDA_DSP_BAR, 152 sd_offset + SOF_HDA_ADSP_REG_SD_CTL); 153 val &= HDA_CL_SD_CTL_RUN(1); 154 if (enable && val) 155 break; 156 else if (!enable && !val) 157 break; 158 } while (--retries); 159 160 if (retries == 0) 161 dev_err(sdev->dev, "%s: failed to set Run bit=%d enable=%d\n", 162 __func__, val, enable); 163 } 164 165 static void cl_skl_cldma_stream_clear(struct snd_sof_dev *sdev) 166 { 167 int sd_offset = SOF_HDA_ADSP_LOADER_BASE; 168 169 /* make sure Run bit is cleared before setting stream register */ 170 cl_skl_cldma_stream_run(sdev, 0); 171 172 /* Disable the Interrupt On Completion, FIFO Error Interrupt, 173 * Descriptor Error Interrupt and set the cldma stream number to 0. 174 */ 175 snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, 176 sd_offset + SOF_HDA_ADSP_REG_SD_CTL, 177 HDA_CL_SD_CTL_INT_MASK, HDA_CL_SD_CTL_INT(0)); 178 snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, 179 sd_offset + SOF_HDA_ADSP_REG_SD_CTL, 180 HDA_CL_SD_CTL_STRM(0xf), HDA_CL_SD_CTL_STRM(0)); 181 182 snd_sof_dsp_write(sdev, HDA_DSP_BAR, 183 sd_offset + SOF_HDA_ADSP_REG_SD_BDLPL, HDA_CL_SD_BDLPLBA(0)); 184 snd_sof_dsp_write(sdev, HDA_DSP_BAR, 185 sd_offset + SOF_HDA_ADSP_REG_SD_BDLPU, 0); 186 187 /* Set the Cyclic Buffer Length to 0. */ 188 snd_sof_dsp_write(sdev, HDA_DSP_BAR, 189 sd_offset + SOF_HDA_ADSP_REG_SD_CBL, 0); 190 /* Set the Last Valid Index. */ 191 snd_sof_dsp_write(sdev, HDA_DSP_BAR, 192 sd_offset + SOF_HDA_ADSP_REG_SD_LVI, 0); 193 } 194 195 static void cl_skl_cldma_setup_spb(struct snd_sof_dev *sdev, 196 unsigned int size, bool enable) 197 { 198 int sd_offset = SOF_DSP_REG_CL_SPBFIFO; 199 200 if (enable) 201 snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, 202 sd_offset + SOF_HDA_ADSP_REG_CL_SPBFIFO_SPBFCCTL, 203 HDA_CL_SPBFIFO_SPBFCCTL_SPIBE_MASK, 204 HDA_CL_SPBFIFO_SPBFCCTL_SPIBE(1)); 205 206 snd_sof_dsp_write(sdev, HDA_DSP_BAR, 207 sd_offset + SOF_HDA_ADSP_REG_CL_SPBFIFO_SPIB, size); 208 } 209 210 static void cl_skl_cldma_set_intr(struct snd_sof_dev *sdev, bool enable) 211 { 212 u32 val = enable ? HDA_DSP_ADSPIC_CL_DMA : 0; 213 214 snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, HDA_DSP_REG_ADSPIC, 215 HDA_DSP_ADSPIC_CL_DMA, val); 216 } 217 218 static void cl_skl_cldma_cleanup_spb(struct snd_sof_dev *sdev) 219 { 220 int sd_offset = SOF_DSP_REG_CL_SPBFIFO; 221 222 snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, 223 sd_offset + SOF_HDA_ADSP_REG_CL_SPBFIFO_SPBFCCTL, 224 HDA_CL_SPBFIFO_SPBFCCTL_SPIBE_MASK, 225 HDA_CL_SPBFIFO_SPBFCCTL_SPIBE(0)); 226 227 snd_sof_dsp_write(sdev, HDA_DSP_BAR, 228 sd_offset + SOF_HDA_ADSP_REG_CL_SPBFIFO_SPIB, 0); 229 } 230 231 static void cl_skl_cldma_setup_controller(struct snd_sof_dev *sdev, 232 struct snd_dma_buffer *dmab_bdl, 233 unsigned int max_size, u32 count) 234 { 235 int sd_offset = SOF_HDA_ADSP_LOADER_BASE; 236 237 /* Clear the stream first and then set it. */ 238 cl_skl_cldma_stream_clear(sdev); 239 240 /* setting the stream register */ 241 snd_sof_dsp_write(sdev, HDA_DSP_BAR, 242 sd_offset + SOF_HDA_ADSP_REG_SD_BDLPL, 243 HDA_CL_SD_BDLPLBA(dmab_bdl->addr)); 244 snd_sof_dsp_write(sdev, HDA_DSP_BAR, 245 sd_offset + SOF_HDA_ADSP_REG_SD_BDLPU, 246 HDA_CL_SD_BDLPUBA(dmab_bdl->addr)); 247 248 /* Set the Cyclic Buffer Length. */ 249 snd_sof_dsp_write(sdev, HDA_DSP_BAR, 250 sd_offset + SOF_HDA_ADSP_REG_SD_CBL, max_size); 251 /* Set the Last Valid Index. */ 252 snd_sof_dsp_write(sdev, HDA_DSP_BAR, 253 sd_offset + SOF_HDA_ADSP_REG_SD_LVI, count - 1); 254 255 /* Set the Interrupt On Completion, FIFO Error Interrupt, 256 * Descriptor Error Interrupt and the cldma stream number. 257 */ 258 snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, 259 sd_offset + SOF_HDA_ADSP_REG_SD_CTL, 260 HDA_CL_SD_CTL_INT_MASK, HDA_CL_SD_CTL_INT(1)); 261 snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, 262 sd_offset + SOF_HDA_ADSP_REG_SD_CTL, 263 HDA_CL_SD_CTL_STRM(0xf), 264 HDA_CL_SD_CTL_STRM(1)); 265 } 266 267 static int cl_stream_prepare_skl(struct snd_sof_dev *sdev, 268 struct snd_dma_buffer *dmab, 269 struct snd_dma_buffer *dmab_bdl) 270 271 { 272 unsigned int bufsize = HDA_SKL_CLDMA_MAX_BUFFER_SIZE; 273 __le32 *bdl; 274 int frags; 275 int ret; 276 277 ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, sdev->dev, bufsize, dmab); 278 if (ret < 0) { 279 dev_err(sdev->dev, "%s: failed to alloc fw buffer: %x\n", __func__, ret); 280 return ret; 281 } 282 283 ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, sdev->dev, bufsize, dmab_bdl); 284 if (ret < 0) { 285 dev_err(sdev->dev, "%s: failed to alloc blde: %x\n", __func__, ret); 286 snd_dma_free_pages(dmab); 287 return ret; 288 } 289 290 bdl = (__le32 *)dmab_bdl->area; 291 frags = cl_skl_cldma_setup_bdle(sdev, dmab, &bdl, bufsize, 1); 292 cl_skl_cldma_setup_controller(sdev, dmab_bdl, bufsize, frags); 293 294 return ret; 295 } 296 297 static void cl_cleanup_skl(struct snd_sof_dev *sdev, 298 struct snd_dma_buffer *dmab, 299 struct snd_dma_buffer *dmab_bdl) 300 { 301 cl_skl_cldma_cleanup_spb(sdev); 302 cl_skl_cldma_stream_clear(sdev); 303 snd_dma_free_pages(dmab); 304 snd_dma_free_pages(dmab_bdl); 305 } 306 307 static int cl_dsp_init_skl(struct snd_sof_dev *sdev, 308 struct snd_dma_buffer *dmab, 309 struct snd_dma_buffer *dmab_bdl) 310 { 311 struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata; 312 const struct sof_intel_dsp_desc *chip = hda->desc; 313 unsigned int status; 314 u32 flags; 315 int ret; 316 317 /* check if the init_core is already enabled, if yes, reset and make it run, 318 * if not, powerdown and enable it again. 319 */ 320 if (hda_dsp_core_is_enabled(sdev, chip->init_core_mask)) { 321 /* if enabled, reset it, and run the init_core. */ 322 ret = hda_dsp_core_stall_reset(sdev, chip->init_core_mask); 323 if (ret < 0) 324 goto err; 325 326 ret = hda_dsp_core_run(sdev, chip->init_core_mask); 327 if (ret < 0) { 328 dev_err(sdev->dev, "%s: dsp core start failed %d\n", __func__, ret); 329 goto err; 330 } 331 } else { 332 /* if not enabled, power down it first and then powerup and run 333 * the init_core. 334 */ 335 ret = hda_dsp_core_reset_power_down(sdev, chip->init_core_mask); 336 if (ret < 0) { 337 dev_err(sdev->dev, "%s: dsp core0 disable fail: %d\n", __func__, ret); 338 goto err; 339 } 340 ret = hda_dsp_enable_core(sdev, chip->init_core_mask); 341 if (ret < 0) { 342 dev_err(sdev->dev, "%s: dsp core0 enable fail: %d\n", __func__, ret); 343 goto err; 344 } 345 } 346 347 /* prepare DMA for code loader stream */ 348 ret = cl_stream_prepare_skl(sdev, dmab, dmab_bdl); 349 if (ret < 0) { 350 dev_err(sdev->dev, "%s: dma prepare fw loading err: %x\n", __func__, ret); 351 return ret; 352 } 353 354 /* enable the interrupt */ 355 snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, HDA_DSP_REG_ADSPIC, 356 HDA_DSP_ADSPIC_IPC, HDA_DSP_ADSPIC_IPC); 357 358 /* enable IPC DONE interrupt */ 359 snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, chip->ipc_ctl, 360 HDA_DSP_REG_HIPCCTL_DONE, 361 HDA_DSP_REG_HIPCCTL_DONE); 362 363 /* enable IPC BUSY interrupt */ 364 snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, chip->ipc_ctl, 365 HDA_DSP_REG_HIPCCTL_BUSY, 366 HDA_DSP_REG_HIPCCTL_BUSY); 367 368 /* polling the ROM init status information. */ 369 ret = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR, 370 chip->rom_status_reg, status, 371 (FSR_TO_STATE_CODE(status) 372 == FSR_STATE_INIT_DONE), 373 HDA_DSP_REG_POLL_INTERVAL_US, 374 chip->rom_init_timeout * 375 USEC_PER_MSEC); 376 if (ret < 0) 377 goto err; 378 379 return ret; 380 381 err: 382 flags = SOF_DBG_DUMP_PCI | SOF_DBG_DUMP_MBOX; 383 384 snd_sof_dsp_dbg_dump(sdev, "Boot failed\n", flags); 385 cl_cleanup_skl(sdev, dmab, dmab_bdl); 386 hda_dsp_core_reset_power_down(sdev, chip->init_core_mask); 387 return ret; 388 } 389 390 static void cl_skl_cldma_fill_buffer(struct snd_sof_dev *sdev, 391 struct snd_dma_buffer *dmab, 392 unsigned int bufsize, 393 unsigned int copysize, 394 const void *curr_pos, 395 bool intr_enable) 396 { 397 struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata; 398 399 /* copy the image into the buffer with the maximum buffer size. */ 400 unsigned int size = (bufsize == copysize) ? bufsize : copysize; 401 402 memcpy(dmab->area, curr_pos, size); 403 404 /* Set the wait condition for every load. */ 405 hda->code_loading = 1; 406 407 /* Set the interrupt. */ 408 if (intr_enable) 409 cl_skl_cldma_set_intr(sdev, true); 410 411 /* Set the SPB. */ 412 cl_skl_cldma_setup_spb(sdev, size, true); 413 414 /* Trigger the code loading stream. */ 415 cl_skl_cldma_stream_run(sdev, true); 416 } 417 418 static int cl_skl_cldma_wait_interruptible(struct snd_sof_dev *sdev, 419 bool intr_wait) 420 { 421 struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata; 422 const struct sof_intel_dsp_desc *chip = hda->desc; 423 int sd_offset = SOF_HDA_ADSP_LOADER_BASE; 424 u8 cl_dma_intr_status; 425 426 /* 427 * Wait for CLDMA interrupt to inform the binary segment transfer is 428 * complete. 429 */ 430 if (!wait_event_timeout(hda->waitq, !hda->code_loading, 431 msecs_to_jiffies(HDA_SKL_WAIT_TIMEOUT))) { 432 dev_err(sdev->dev, "cldma copy timeout\n"); 433 dev_err(sdev->dev, "ROM code=%#x: FW status=%#x\n", 434 snd_sof_dsp_read(sdev, HDA_DSP_BAR, HDA_DSP_SRAM_REG_ROM_ERROR), 435 snd_sof_dsp_read(sdev, HDA_DSP_BAR, chip->rom_status_reg)); 436 return -EIO; 437 } 438 439 /* now check DMA interrupt status */ 440 cl_dma_intr_status = snd_sof_dsp_read(sdev, HDA_DSP_BAR, 441 sd_offset + SOF_HDA_ADSP_REG_SD_STS); 442 443 if (!(cl_dma_intr_status & HDA_CL_DMA_SD_INT_COMPLETE)) { 444 dev_err(sdev->dev, "cldma copy failed\n"); 445 return -EIO; 446 } 447 448 dev_dbg(sdev->dev, "cldma buffer copy complete\n"); 449 return 0; 450 } 451 452 static int 453 cl_skl_cldma_copy_to_buf(struct snd_sof_dev *sdev, 454 struct snd_dma_buffer *dmab, 455 const void *bin, 456 u32 total_size, u32 bufsize) 457 { 458 unsigned int bytes_left = total_size; 459 const void *curr_pos = bin; 460 int ret; 461 462 if (total_size <= 0) 463 return -EINVAL; 464 465 while (bytes_left > 0) { 466 if (bytes_left > bufsize) { 467 dev_dbg(sdev->dev, "cldma copy %#x bytes\n", bufsize); 468 469 cl_skl_cldma_fill_buffer(sdev, dmab, bufsize, bufsize, curr_pos, true); 470 471 ret = cl_skl_cldma_wait_interruptible(sdev, false); 472 if (ret < 0) { 473 dev_err(sdev->dev, "%s: fw failed to load. %#x bytes remaining\n", 474 __func__, bytes_left); 475 return ret; 476 } 477 478 bytes_left -= bufsize; 479 curr_pos += bufsize; 480 } else { 481 dev_dbg(sdev->dev, "cldma copy %#x bytes\n", bytes_left); 482 483 cl_skl_cldma_set_intr(sdev, false); 484 cl_skl_cldma_fill_buffer(sdev, dmab, bufsize, bytes_left, curr_pos, false); 485 return 0; 486 } 487 } 488 489 return bytes_left; 490 } 491 492 static int cl_copy_fw_skl(struct snd_sof_dev *sdev, 493 struct snd_dma_buffer *dmab) 494 495 { 496 const struct firmware *fw = sdev->basefw.fw; 497 struct firmware stripped_firmware; 498 unsigned int bufsize = HDA_SKL_CLDMA_MAX_BUFFER_SIZE; 499 int ret; 500 501 stripped_firmware.data = fw->data + sdev->basefw.payload_offset; 502 stripped_firmware.size = fw->size - sdev->basefw.payload_offset; 503 504 dev_dbg(sdev->dev, "firmware size: %#zx buffer size %#x\n", fw->size, bufsize); 505 506 ret = cl_skl_cldma_copy_to_buf(sdev, dmab, stripped_firmware.data, 507 stripped_firmware.size, bufsize); 508 if (ret < 0) 509 dev_err(sdev->dev, "%s: fw copy failed %d\n", __func__, ret); 510 511 return ret; 512 } 513 514 int hda_dsp_cl_boot_firmware_skl(struct snd_sof_dev *sdev) 515 { 516 struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata; 517 const struct sof_intel_dsp_desc *chip = hda->desc; 518 struct snd_dma_buffer dmab_bdl; 519 struct snd_dma_buffer dmab; 520 unsigned int reg; 521 u32 flags; 522 int ret; 523 524 ret = cl_dsp_init_skl(sdev, &dmab, &dmab_bdl); 525 526 /* retry enabling core and ROM load. seemed to help */ 527 if (ret < 0) { 528 ret = cl_dsp_init_skl(sdev, &dmab, &dmab_bdl); 529 if (ret < 0) { 530 dev_err(sdev->dev, "Error code=%#x: FW status=%#x\n", 531 snd_sof_dsp_read(sdev, HDA_DSP_BAR, HDA_DSP_SRAM_REG_ROM_ERROR), 532 snd_sof_dsp_read(sdev, HDA_DSP_BAR, chip->rom_status_reg)); 533 dev_err(sdev->dev, "Core En/ROM load fail:%d\n", ret); 534 return ret; 535 } 536 } 537 538 dev_dbg(sdev->dev, "ROM init successful\n"); 539 540 /* at this point DSP ROM has been initialized and should be ready for 541 * code loading and firmware boot 542 */ 543 ret = cl_copy_fw_skl(sdev, &dmab); 544 if (ret < 0) { 545 dev_err(sdev->dev, "%s: load firmware failed : %d\n", __func__, ret); 546 goto err; 547 } 548 549 ret = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR, 550 chip->rom_status_reg, reg, 551 (FSR_TO_STATE_CODE(reg) 552 == FSR_STATE_ROM_BASEFW_ENTERED), 553 HDA_DSP_REG_POLL_INTERVAL_US, 554 HDA_DSP_BASEFW_TIMEOUT_US); 555 556 dev_dbg(sdev->dev, "Firmware download successful, booting...\n"); 557 558 cl_skl_cldma_stream_run(sdev, false); 559 cl_cleanup_skl(sdev, &dmab, &dmab_bdl); 560 561 if (!ret) 562 return chip->init_core_mask; 563 564 return ret; 565 566 err: 567 flags = SOF_DBG_DUMP_PCI | SOF_DBG_DUMP_MBOX; 568 569 snd_sof_dsp_dbg_dump(sdev, "Boot failed\n", flags); 570 571 /* power down DSP */ 572 hda_dsp_core_reset_power_down(sdev, chip->init_core_mask); 573 cl_skl_cldma_stream_run(sdev, false); 574 cl_cleanup_skl(sdev, &dmab, &dmab_bdl); 575 576 dev_err(sdev->dev, "%s: load fw failed err: %d\n", __func__, ret); 577 return ret; 578 } 579