xref: /linux/sound/soc/sh/ssi.c (revision a3a4a816b4b194c45d0217e8b9e08b2639802cda)
1 /*
2  * Serial Sound Interface (I2S) support for SH7760/SH7780
3  *
4  * Copyright (c) 2007 Manuel Lauss <mano@roarinelk.homelinux.net>
5  *
6  *  licensed under the terms outlined in the file COPYING at the root
7  *  of the linux kernel sources.
8  *
9  * dont forget to set IPSEL/OMSEL register bits (in your board code) to
10  * enable SSI output pins!
11  */
12 
13 /*
14  * LIMITATIONS:
15  *	The SSI unit has only one physical data line, so full duplex is
16  *	impossible.  This can be remedied  on the  SH7760 by  using the
17  *	other SSI unit for recording; however the SH7780 has only 1 SSI
18  *	unit, and its pins are shared with the AC97 unit,  among others.
19  *
20  * FEATURES:
21  *	The SSI features "compressed mode": in this mode it continuously
22  *	streams PCM data over the I2S lines and uses LRCK as a handshake
23  *	signal.  Can be used to send compressed data (AC3/DTS) to a DSP.
24  *	The number of bits sent over the wire in a frame can be adjusted
25  *	and can be independent from the actual sample bit depth. This is
26  *	useful to support TDM mode codecs like the AD1939 which have a
27  *	fixed TDM slot size, regardless of sample resolution.
28  */
29 
30 #include <linux/init.h>
31 #include <linux/module.h>
32 #include <linux/platform_device.h>
33 #include <sound/core.h>
34 #include <sound/pcm.h>
35 #include <sound/initval.h>
36 #include <sound/soc.h>
37 #include <asm/io.h>
38 
39 #define SSICR	0x00
40 #define SSISR	0x04
41 
42 #define CR_DMAEN	(1 << 28)
43 #define CR_CHNL_SHIFT	22
44 #define CR_CHNL_MASK	(3 << CR_CHNL_SHIFT)
45 #define CR_DWL_SHIFT	19
46 #define CR_DWL_MASK	(7 << CR_DWL_SHIFT)
47 #define CR_SWL_SHIFT	16
48 #define CR_SWL_MASK	(7 << CR_SWL_SHIFT)
49 #define CR_SCK_MASTER	(1 << 15)	/* bitclock master bit */
50 #define CR_SWS_MASTER	(1 << 14)	/* wordselect master bit */
51 #define CR_SCKP		(1 << 13)	/* I2Sclock polarity */
52 #define CR_SWSP		(1 << 12)	/* LRCK polarity */
53 #define CR_SPDP		(1 << 11)
54 #define CR_SDTA		(1 << 10)	/* i2s alignment (msb/lsb) */
55 #define CR_PDTA		(1 << 9)	/* fifo data alignment */
56 #define CR_DEL		(1 << 8)	/* delay data by 1 i2sclk */
57 #define CR_BREN		(1 << 7)	/* clock gating in burst mode */
58 #define CR_CKDIV_SHIFT	4
59 #define CR_CKDIV_MASK	(7 << CR_CKDIV_SHIFT)	/* bitclock divider */
60 #define CR_MUTE		(1 << 3)	/* SSI mute */
61 #define CR_CPEN		(1 << 2)	/* compressed mode */
62 #define CR_TRMD		(1 << 1)	/* transmit/receive select */
63 #define CR_EN		(1 << 0)	/* enable SSI */
64 
65 #define SSIREG(reg)	(*(unsigned long *)(ssi->mmio + (reg)))
66 
67 struct ssi_priv {
68 	unsigned long mmio;
69 	unsigned long sysclk;
70 	int inuse;
71 } ssi_cpu_data[] = {
72 #if defined(CONFIG_CPU_SUBTYPE_SH7760)
73 	{
74 		.mmio	= 0xFE680000,
75 	},
76 	{
77 		.mmio	= 0xFE690000,
78 	},
79 #elif defined(CONFIG_CPU_SUBTYPE_SH7780)
80 	{
81 		.mmio	= 0xFFE70000,
82 	},
83 #else
84 #error "Unsupported SuperH SoC"
85 #endif
86 };
87 
88 /*
89  * track usage of the SSI; it is simplex-only so prevent attempts of
90  * concurrent playback + capture. FIXME: any locking required?
91  */
92 static int ssi_startup(struct snd_pcm_substream *substream,
93 		       struct snd_soc_dai *dai)
94 {
95 	struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
96 	if (ssi->inuse) {
97 		pr_debug("ssi: already in use!\n");
98 		return -EBUSY;
99 	} else
100 		ssi->inuse = 1;
101 	return 0;
102 }
103 
104 static void ssi_shutdown(struct snd_pcm_substream *substream,
105 			 struct snd_soc_dai *dai)
106 {
107 	struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
108 
109 	ssi->inuse = 0;
110 }
111 
112 static int ssi_trigger(struct snd_pcm_substream *substream, int cmd,
113 		       struct snd_soc_dai *dai)
114 {
115 	struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
116 
117 	switch (cmd) {
118 	case SNDRV_PCM_TRIGGER_START:
119 		SSIREG(SSICR) |= CR_DMAEN | CR_EN;
120 		break;
121 	case SNDRV_PCM_TRIGGER_STOP:
122 		SSIREG(SSICR) &= ~(CR_DMAEN | CR_EN);
123 		break;
124 	default:
125 		return -EINVAL;
126 	}
127 
128 	return 0;
129 }
130 
131 static int ssi_hw_params(struct snd_pcm_substream *substream,
132 			 struct snd_pcm_hw_params *params,
133 			 struct snd_soc_dai *dai)
134 {
135 	struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
136 	unsigned long ssicr = SSIREG(SSICR);
137 	unsigned int bits, channels, swl, recv, i;
138 
139 	channels = params_channels(params);
140 	bits = params->msbits;
141 	recv = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? 0 : 1;
142 
143 	pr_debug("ssi_hw_params() enter\nssicr was    %08lx\n", ssicr);
144 	pr_debug("bits: %u channels: %u\n", bits, channels);
145 
146 	ssicr &= ~(CR_TRMD | CR_CHNL_MASK | CR_DWL_MASK | CR_PDTA |
147 		   CR_SWL_MASK);
148 
149 	/* direction (send/receive) */
150 	if (!recv)
151 		ssicr |= CR_TRMD;	/* transmit */
152 
153 	/* channels */
154 	if ((channels < 2) || (channels > 8) || (channels & 1)) {
155 		pr_debug("ssi: invalid number of channels\n");
156 		return -EINVAL;
157 	}
158 	ssicr |= ((channels >> 1) - 1) << CR_CHNL_SHIFT;
159 
160 	/* DATA WORD LENGTH (DWL): databits in audio sample */
161 	i = 0;
162 	switch (bits) {
163 	case 32: ++i;
164 	case 24: ++i;
165 	case 22: ++i;
166 	case 20: ++i;
167 	case 18: ++i;
168 	case 16: ++i;
169 		 ssicr |= i << CR_DWL_SHIFT;
170 	case 8:	 break;
171 	default:
172 		pr_debug("ssi: invalid sample width\n");
173 		return -EINVAL;
174 	}
175 
176 	/*
177 	 * SYSTEM WORD LENGTH: size in bits of half a frame over the I2S
178 	 * wires. This is usually bits_per_sample x channels/2;  i.e. in
179 	 * Stereo mode  the SWL equals DWL.  SWL can  be bigger than the
180 	 * product of (channels_per_slot x samplebits), e.g.  for codecs
181 	 * like the AD1939 which  only accept 32bit wide TDM slots.  For
182 	 * "standard" I2S operation we set SWL = chans / 2 * DWL here.
183 	 * Waiting for ASoC to get TDM support ;-)
184 	 */
185 	if ((bits > 16) && (bits <= 24)) {
186 		bits = 24;	/* these are padded by the SSI */
187 		/*ssicr |= CR_PDTA;*/ /* cpu/data endianness ? */
188 	}
189 	i = 0;
190 	swl = (bits * channels) / 2;
191 	switch (swl) {
192 	case 256: ++i;
193 	case 128: ++i;
194 	case 64:  ++i;
195 	case 48:  ++i;
196 	case 32:  ++i;
197 	case 16:  ++i;
198 		  ssicr |= i << CR_SWL_SHIFT;
199 	case 8:   break;
200 	default:
201 		pr_debug("ssi: invalid system word length computed\n");
202 		return -EINVAL;
203 	}
204 
205 	SSIREG(SSICR) = ssicr;
206 
207 	pr_debug("ssi_hw_params() leave\nssicr is now %08lx\n", ssicr);
208 	return 0;
209 }
210 
211 static int ssi_set_sysclk(struct snd_soc_dai *cpu_dai, int clk_id,
212 			  unsigned int freq, int dir)
213 {
214 	struct ssi_priv *ssi = &ssi_cpu_data[cpu_dai->id];
215 
216 	ssi->sysclk = freq;
217 
218 	return 0;
219 }
220 
221 /*
222  * This divider is used to generate the SSI_SCK (I2S bitclock) from the
223  * clock at the HAC_BIT_CLK ("oversampling clock") pin.
224  */
225 static int ssi_set_clkdiv(struct snd_soc_dai *dai, int did, int div)
226 {
227 	struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
228 	unsigned long ssicr;
229 	int i;
230 
231 	i = 0;
232 	ssicr = SSIREG(SSICR) & ~CR_CKDIV_MASK;
233 	switch (div) {
234 	case 16: ++i;
235 	case 8:  ++i;
236 	case 4:  ++i;
237 	case 2:  ++i;
238 		 SSIREG(SSICR) = ssicr | (i << CR_CKDIV_SHIFT);
239 	case 1:  break;
240 	default:
241 		pr_debug("ssi: invalid sck divider %d\n", div);
242 		return -EINVAL;
243 	}
244 
245 	return 0;
246 }
247 
248 static int ssi_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
249 {
250 	struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
251 	unsigned long ssicr = SSIREG(SSICR);
252 
253 	pr_debug("ssi_set_fmt()\nssicr was    0x%08lx\n", ssicr);
254 
255 	ssicr &= ~(CR_DEL | CR_PDTA | CR_BREN | CR_SWSP | CR_SCKP |
256 		   CR_SWS_MASTER | CR_SCK_MASTER);
257 
258 	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
259 	case SND_SOC_DAIFMT_I2S:
260 		break;
261 	case SND_SOC_DAIFMT_RIGHT_J:
262 		ssicr |= CR_DEL | CR_PDTA;
263 		break;
264 	case SND_SOC_DAIFMT_LEFT_J:
265 		ssicr |= CR_DEL;
266 		break;
267 	default:
268 		pr_debug("ssi: unsupported format\n");
269 		return -EINVAL;
270 	}
271 
272 	switch (fmt & SND_SOC_DAIFMT_CLOCK_MASK) {
273 	case SND_SOC_DAIFMT_CONT:
274 		break;
275 	case SND_SOC_DAIFMT_GATED:
276 		ssicr |= CR_BREN;
277 		break;
278 	}
279 
280 	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
281 	case SND_SOC_DAIFMT_NB_NF:
282 		ssicr |= CR_SCKP;	/* sample data at low clkedge */
283 		break;
284 	case SND_SOC_DAIFMT_NB_IF:
285 		ssicr |= CR_SCKP | CR_SWSP;
286 		break;
287 	case SND_SOC_DAIFMT_IB_NF:
288 		break;
289 	case SND_SOC_DAIFMT_IB_IF:
290 		ssicr |= CR_SWSP;	/* word select starts low */
291 		break;
292 	default:
293 		pr_debug("ssi: invalid inversion\n");
294 		return -EINVAL;
295 	}
296 
297 	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
298 	case SND_SOC_DAIFMT_CBM_CFM:
299 		break;
300 	case SND_SOC_DAIFMT_CBS_CFM:
301 		ssicr |= CR_SCK_MASTER;
302 		break;
303 	case SND_SOC_DAIFMT_CBM_CFS:
304 		ssicr |= CR_SWS_MASTER;
305 		break;
306 	case SND_SOC_DAIFMT_CBS_CFS:
307 		ssicr |= CR_SWS_MASTER | CR_SCK_MASTER;
308 		break;
309 	default:
310 		pr_debug("ssi: invalid master/slave configuration\n");
311 		return -EINVAL;
312 	}
313 
314 	SSIREG(SSICR) = ssicr;
315 	pr_debug("ssi_set_fmt() leave\nssicr is now 0x%08lx\n", ssicr);
316 
317 	return 0;
318 }
319 
320 /* the SSI depends on an external clocksource (at HAC_BIT_CLK) even in
321  * Master mode,  so really this is board specific;  the SSI can do any
322  * rate with the right bitclk and divider settings.
323  */
324 #define SSI_RATES	\
325 	SNDRV_PCM_RATE_8000_192000
326 
327 /* the SSI can do 8-32 bit samples, with 8 possible channels */
328 #define SSI_FMTS	\
329 	(SNDRV_PCM_FMTBIT_S8      | SNDRV_PCM_FMTBIT_U8      |	\
330 	 SNDRV_PCM_FMTBIT_S16_LE  | SNDRV_PCM_FMTBIT_U16_LE  |	\
331 	 SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_U20_3LE |	\
332 	 SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_U24_3LE |	\
333 	 SNDRV_PCM_FMTBIT_S32_LE  | SNDRV_PCM_FMTBIT_U32_LE)
334 
335 static const struct snd_soc_dai_ops ssi_dai_ops = {
336 	.startup	= ssi_startup,
337 	.shutdown	= ssi_shutdown,
338 	.trigger	= ssi_trigger,
339 	.hw_params	= ssi_hw_params,
340 	.set_sysclk	= ssi_set_sysclk,
341 	.set_clkdiv	= ssi_set_clkdiv,
342 	.set_fmt	= ssi_set_fmt,
343 };
344 
345 static struct snd_soc_dai_driver sh4_ssi_dai[] = {
346 {
347 	.name			= "ssi-dai.0",
348 	.playback = {
349 		.rates		= SSI_RATES,
350 		.formats	= SSI_FMTS,
351 		.channels_min	= 2,
352 		.channels_max	= 8,
353 	},
354 	.capture = {
355 		.rates		= SSI_RATES,
356 		.formats	= SSI_FMTS,
357 		.channels_min	= 2,
358 		.channels_max	= 8,
359 	},
360 	.ops = &ssi_dai_ops,
361 },
362 #ifdef CONFIG_CPU_SUBTYPE_SH7760
363 {
364 	.name			= "ssi-dai.1",
365 	.playback = {
366 		.rates		= SSI_RATES,
367 		.formats	= SSI_FMTS,
368 		.channels_min	= 2,
369 		.channels_max	= 8,
370 	},
371 	.capture = {
372 		.rates		= SSI_RATES,
373 		.formats	= SSI_FMTS,
374 		.channels_min	= 2,
375 		.channels_max	= 8,
376 	},
377 	.ops = &ssi_dai_ops,
378 },
379 #endif
380 };
381 
382 static const struct snd_soc_component_driver sh4_ssi_component = {
383 	.name		= "sh4-ssi",
384 };
385 
386 static int sh4_soc_dai_probe(struct platform_device *pdev)
387 {
388 	return devm_snd_soc_register_component(&pdev->dev, &sh4_ssi_component,
389 					       sh4_ssi_dai,
390 					       ARRAY_SIZE(sh4_ssi_dai));
391 }
392 
393 static struct platform_driver sh4_ssi_driver = {
394 	.driver = {
395 			.name = "sh4-ssi-dai",
396 	},
397 
398 	.probe = sh4_soc_dai_probe,
399 };
400 
401 module_platform_driver(sh4_ssi_driver);
402 
403 MODULE_LICENSE("GPL");
404 MODULE_DESCRIPTION("SuperH onchip SSI (I2S) audio driver");
405 MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");
406