xref: /linux/sound/soc/samsung/speyside.c (revision 95e9fd10f06cb5642028b6b851e32b8c8afb4571)
1 /*
2  * Speyside audio support
3  *
4  * Copyright 2011 Wolfson Microelectronics
5  *
6  * This program is free software; you can redistribute  it and/or modify it
7  * under  the terms of  the GNU General  Public License as published by the
8  * Free Software Foundation;  either version 2 of the  License, or (at your
9  * option) any later version.
10  */
11 
12 #include <sound/soc.h>
13 #include <sound/soc-dapm.h>
14 #include <sound/jack.h>
15 #include <linux/gpio.h>
16 #include <linux/module.h>
17 
18 #include "../codecs/wm8996.h"
19 #include "../codecs/wm9081.h"
20 
21 #define WM8996_HPSEL_GPIO 214
22 #define MCLK_AUDIO_RATE (512 * 48000)
23 
24 static int speyside_set_bias_level(struct snd_soc_card *card,
25 				   struct snd_soc_dapm_context *dapm,
26 				   enum snd_soc_bias_level level)
27 {
28 	struct snd_soc_dai *codec_dai = card->rtd[0].codec_dai;
29 	int ret;
30 
31 	if (dapm->dev != codec_dai->dev)
32 		return 0;
33 
34 	switch (level) {
35 	case SND_SOC_BIAS_STANDBY:
36 		ret = snd_soc_dai_set_sysclk(codec_dai, WM8996_SYSCLK_MCLK2,
37 					     32768, SND_SOC_CLOCK_IN);
38 		if (ret < 0)
39 			return ret;
40 
41 		ret = snd_soc_dai_set_pll(codec_dai, WM8996_FLL_MCLK2,
42 					  0, 0, 0);
43 		if (ret < 0) {
44 			pr_err("Failed to stop FLL\n");
45 			return ret;
46 		}
47 		break;
48 
49 	default:
50 		break;
51 	}
52 
53 	return 0;
54 }
55 
56 static int speyside_set_bias_level_post(struct snd_soc_card *card,
57 					struct snd_soc_dapm_context *dapm,
58 					enum snd_soc_bias_level level)
59 {
60 	struct snd_soc_dai *codec_dai = card->rtd[0].codec_dai;
61 	int ret;
62 
63 	if (dapm->dev != codec_dai->dev)
64 		return 0;
65 
66 	switch (level) {
67 	case SND_SOC_BIAS_PREPARE:
68 		if (card->dapm.bias_level == SND_SOC_BIAS_STANDBY) {
69 			ret = snd_soc_dai_set_pll(codec_dai, 0,
70 						  WM8996_FLL_MCLK2,
71 						  32768, MCLK_AUDIO_RATE);
72 			if (ret < 0) {
73 				pr_err("Failed to start FLL\n");
74 				return ret;
75 			}
76 
77 			ret = snd_soc_dai_set_sysclk(codec_dai,
78 						     WM8996_SYSCLK_FLL,
79 						     MCLK_AUDIO_RATE,
80 						     SND_SOC_CLOCK_IN);
81 			if (ret < 0)
82 				return ret;
83 		}
84 		break;
85 
86 	default:
87 		break;
88 	}
89 
90 	card->dapm.bias_level = level;
91 
92 	return 0;
93 }
94 
95 static struct snd_soc_jack speyside_headset;
96 
97 /* Headset jack detection DAPM pins */
98 static struct snd_soc_jack_pin speyside_headset_pins[] = {
99 	{
100 		.pin = "Headset Mic",
101 		.mask = SND_JACK_MICROPHONE,
102 	},
103 };
104 
105 /* Default the headphone selection to active high */
106 static int speyside_jack_polarity;
107 
108 static int speyside_get_micbias(struct snd_soc_dapm_widget *source,
109 				struct snd_soc_dapm_widget *sink)
110 {
111 	if (speyside_jack_polarity && (strcmp(source->name, "MICB1") == 0))
112 		return 1;
113 	if (!speyside_jack_polarity && (strcmp(source->name, "MICB2") == 0))
114 		return 1;
115 
116 	return 0;
117 }
118 
119 static void speyside_set_polarity(struct snd_soc_codec *codec,
120 				  int polarity)
121 {
122 	speyside_jack_polarity = !polarity;
123 	gpio_direction_output(WM8996_HPSEL_GPIO, speyside_jack_polarity);
124 
125 	/* Re-run DAPM to make sure we're using the correct mic bias */
126 	snd_soc_dapm_sync(&codec->dapm);
127 }
128 
129 static int speyside_wm8996_init(struct snd_soc_pcm_runtime *rtd)
130 {
131 	struct snd_soc_dai *dai = rtd->codec_dai;
132 	struct snd_soc_codec *codec = rtd->codec;
133 	int ret;
134 
135 	ret = snd_soc_dai_set_sysclk(dai, WM8996_SYSCLK_MCLK2, 32768, 0);
136 	if (ret < 0)
137 		return ret;
138 
139 	ret = gpio_request(WM8996_HPSEL_GPIO, "HP_SEL");
140 	if (ret != 0)
141 		pr_err("Failed to request HP_SEL GPIO: %d\n", ret);
142 	gpio_direction_output(WM8996_HPSEL_GPIO, speyside_jack_polarity);
143 
144 	ret = snd_soc_jack_new(codec, "Headset",
145 			       SND_JACK_LINEOUT | SND_JACK_HEADSET |
146 			       SND_JACK_BTN_0,
147 			       &speyside_headset);
148 	if (ret)
149 		return ret;
150 
151 	ret = snd_soc_jack_add_pins(&speyside_headset,
152 				    ARRAY_SIZE(speyside_headset_pins),
153 				    speyside_headset_pins);
154 	if (ret)
155 		return ret;
156 
157 	wm8996_detect(codec, &speyside_headset, speyside_set_polarity);
158 
159 	return 0;
160 }
161 
162 static int speyside_late_probe(struct snd_soc_card *card)
163 {
164 	snd_soc_dapm_ignore_suspend(&card->dapm, "Headphone");
165 	snd_soc_dapm_ignore_suspend(&card->dapm, "Headset Mic");
166 	snd_soc_dapm_ignore_suspend(&card->dapm, "Main AMIC");
167 	snd_soc_dapm_ignore_suspend(&card->dapm, "Main DMIC");
168 	snd_soc_dapm_ignore_suspend(&card->dapm, "Main Speaker");
169 	snd_soc_dapm_ignore_suspend(&card->dapm, "WM1250 Output");
170 	snd_soc_dapm_ignore_suspend(&card->dapm, "WM1250 Input");
171 
172 	return 0;
173 }
174 
175 static struct snd_soc_dai_link speyside_dai[] = {
176 	{
177 		.name = "CPU",
178 		.stream_name = "CPU",
179 		.cpu_dai_name = "samsung-i2s.0",
180 		.codec_dai_name = "wm8996-aif1",
181 		.platform_name = "samsung-audio",
182 		.codec_name = "wm8996.1-001a",
183 		.init = speyside_wm8996_init,
184 		.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
185 				| SND_SOC_DAIFMT_CBM_CFM,
186 	},
187 	{
188 		.name = "Baseband",
189 		.stream_name = "Baseband",
190 		.cpu_dai_name = "wm8996-aif2",
191 		.codec_dai_name = "wm1250-ev1",
192 		.codec_name = "wm1250-ev1.1-0027",
193 		.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
194 				| SND_SOC_DAIFMT_CBM_CFM,
195 		.ignore_suspend = 1,
196 	},
197 };
198 
199 static int speyside_wm9081_init(struct snd_soc_dapm_context *dapm)
200 {
201 	/* At any time the WM9081 is active it will have this clock */
202 	return snd_soc_codec_set_sysclk(dapm->codec, WM9081_SYSCLK_MCLK, 0,
203 					MCLK_AUDIO_RATE, 0);
204 }
205 
206 static struct snd_soc_aux_dev speyside_aux_dev[] = {
207 	{
208 		.name = "wm9081",
209 		.codec_name = "wm9081.1-006c",
210 		.init = speyside_wm9081_init,
211 	},
212 };
213 
214 static struct snd_soc_codec_conf speyside_codec_conf[] = {
215 	{
216 		.dev_name = "wm9081.1-006c",
217 		.name_prefix = "Sub",
218 	},
219 };
220 
221 static const struct snd_kcontrol_new controls[] = {
222 	SOC_DAPM_PIN_SWITCH("Main Speaker"),
223 	SOC_DAPM_PIN_SWITCH("Main DMIC"),
224 	SOC_DAPM_PIN_SWITCH("Main AMIC"),
225 	SOC_DAPM_PIN_SWITCH("WM1250 Input"),
226 	SOC_DAPM_PIN_SWITCH("WM1250 Output"),
227 	SOC_DAPM_PIN_SWITCH("Headphone"),
228 };
229 
230 static struct snd_soc_dapm_widget widgets[] = {
231 	SND_SOC_DAPM_HP("Headphone", NULL),
232 	SND_SOC_DAPM_MIC("Headset Mic", NULL),
233 
234 	SND_SOC_DAPM_SPK("Main Speaker", NULL),
235 
236 	SND_SOC_DAPM_MIC("Main AMIC", NULL),
237 	SND_SOC_DAPM_MIC("Main DMIC", NULL),
238 };
239 
240 static struct snd_soc_dapm_route audio_paths[] = {
241 	{ "IN1RN", NULL, "MICB1" },
242 	{ "IN1RP", NULL, "MICB1" },
243 	{ "IN1RN", NULL, "MICB2" },
244 	{ "IN1RP", NULL, "MICB2" },
245 	{ "MICB1", NULL, "Headset Mic", speyside_get_micbias },
246 	{ "MICB2", NULL, "Headset Mic", speyside_get_micbias },
247 
248 	{ "IN1LP", NULL, "MICB2" },
249 	{ "IN1RN", NULL, "MICB1" },
250 	{ "MICB2", NULL, "Main AMIC" },
251 
252 	{ "DMIC1DAT", NULL, "MICB1" },
253 	{ "DMIC2DAT", NULL, "MICB1" },
254 	{ "MICB1", NULL, "Main DMIC" },
255 
256 	{ "Headphone", NULL, "HPOUT1L" },
257 	{ "Headphone", NULL, "HPOUT1R" },
258 
259 	{ "Sub IN1", NULL, "HPOUT2L" },
260 	{ "Sub IN2", NULL, "HPOUT2R" },
261 
262 	{ "Main Speaker", NULL, "Sub SPKN" },
263 	{ "Main Speaker", NULL, "Sub SPKP" },
264 	{ "Main Speaker", NULL, "SPKDAT" },
265 };
266 
267 static struct snd_soc_card speyside = {
268 	.name = "Speyside",
269 	.owner = THIS_MODULE,
270 	.dai_link = speyside_dai,
271 	.num_links = ARRAY_SIZE(speyside_dai),
272 	.aux_dev = speyside_aux_dev,
273 	.num_aux_devs = ARRAY_SIZE(speyside_aux_dev),
274 	.codec_conf = speyside_codec_conf,
275 	.num_configs = ARRAY_SIZE(speyside_codec_conf),
276 
277 	.set_bias_level = speyside_set_bias_level,
278 	.set_bias_level_post = speyside_set_bias_level_post,
279 
280 	.controls = controls,
281 	.num_controls = ARRAY_SIZE(controls),
282 	.dapm_widgets = widgets,
283 	.num_dapm_widgets = ARRAY_SIZE(widgets),
284 	.dapm_routes = audio_paths,
285 	.num_dapm_routes = ARRAY_SIZE(audio_paths),
286 	.fully_routed = true,
287 
288 	.late_probe = speyside_late_probe,
289 };
290 
291 static __devinit int speyside_probe(struct platform_device *pdev)
292 {
293 	struct snd_soc_card *card = &speyside;
294 	int ret;
295 
296 	card->dev = &pdev->dev;
297 
298 	ret = snd_soc_register_card(card);
299 	if (ret) {
300 		dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
301 			ret);
302 		return ret;
303 	}
304 
305 	return 0;
306 }
307 
308 static int __devexit speyside_remove(struct platform_device *pdev)
309 {
310 	struct snd_soc_card *card = platform_get_drvdata(pdev);
311 
312 	snd_soc_unregister_card(card);
313 
314 	return 0;
315 }
316 
317 static struct platform_driver speyside_driver = {
318 	.driver = {
319 		.name = "speyside",
320 		.owner = THIS_MODULE,
321 		.pm = &snd_soc_pm_ops,
322 	},
323 	.probe = speyside_probe,
324 	.remove = __devexit_p(speyside_remove),
325 };
326 
327 module_platform_driver(speyside_driver);
328 
329 MODULE_DESCRIPTION("Speyside audio support");
330 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
331 MODULE_LICENSE("GPL");
332 MODULE_ALIAS("platform:speyside");
333