1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * cht_bsw_rt5672.c - ASoc Machine driver for Intel Cherryview-based platforms 4 * Cherrytrail and Braswell, with RT5672 codec. 5 * 6 * Copyright (C) 2014 Intel Corp 7 * Author: Subhransu S. Prusty <subhransu.s.prusty@intel.com> 8 * Mengdong Lin <mengdong.lin@intel.com> 9 */ 10 11 #include <linux/gpio/consumer.h> 12 #include <linux/input.h> 13 #include <linux/module.h> 14 #include <linux/platform_device.h> 15 #include <linux/slab.h> 16 #include <linux/clk.h> 17 #include <sound/pcm.h> 18 #include <sound/pcm_params.h> 19 #include <sound/soc.h> 20 #include <sound/jack.h> 21 #include <sound/soc-acpi.h> 22 #include "../../codecs/rt5670.h" 23 #include "../atom/sst-atom-controls.h" 24 #include "../common/soc-intel-quirks.h" 25 26 27 /* The platform clock #3 outputs 19.2Mhz clock to codec as I2S MCLK */ 28 #define CHT_PLAT_CLK_3_HZ 19200000 29 #define CHT_CODEC_DAI "rt5670-aif1" 30 31 struct cht_mc_private { 32 struct snd_soc_jack headset; 33 char codec_name[SND_ACPI_I2C_ID_LEN]; 34 struct clk *mclk; 35 bool use_ssp0; 36 }; 37 38 /* Headset jack detection DAPM pins */ 39 static struct snd_soc_jack_pin cht_bsw_headset_pins[] = { 40 { 41 .pin = "Headset Mic", 42 .mask = SND_JACK_MICROPHONE, 43 }, 44 { 45 .pin = "Headphone", 46 .mask = SND_JACK_HEADPHONE, 47 }, 48 }; 49 50 static int platform_clock_control(struct snd_soc_dapm_widget *w, 51 struct snd_kcontrol *k, int event) 52 { 53 struct snd_soc_dapm_context *dapm = w->dapm; 54 struct snd_soc_card *card = dapm->card; 55 struct snd_soc_dai *codec_dai; 56 struct cht_mc_private *ctx = snd_soc_card_get_drvdata(card); 57 int ret; 58 59 codec_dai = snd_soc_card_get_codec_dai(card, CHT_CODEC_DAI); 60 if (!codec_dai) { 61 dev_err(card->dev, "Codec dai not found; Unable to set platform clock\n"); 62 return -EIO; 63 } 64 65 if (SND_SOC_DAPM_EVENT_ON(event)) { 66 if (ctx->mclk) { 67 ret = clk_prepare_enable(ctx->mclk); 68 if (ret < 0) { 69 dev_err(card->dev, 70 "could not configure MCLK state"); 71 return ret; 72 } 73 } 74 75 /* set codec PLL source to the 19.2MHz platform clock (MCLK) */ 76 ret = snd_soc_dai_set_pll(codec_dai, 0, RT5670_PLL1_S_MCLK, 77 CHT_PLAT_CLK_3_HZ, 48000 * 512); 78 if (ret < 0) { 79 dev_err(card->dev, "can't set codec pll: %d\n", ret); 80 return ret; 81 } 82 83 /* set codec sysclk source to PLL */ 84 ret = snd_soc_dai_set_sysclk(codec_dai, RT5670_SCLK_S_PLL1, 85 48000 * 512, SND_SOC_CLOCK_IN); 86 if (ret < 0) { 87 dev_err(card->dev, "can't set codec sysclk: %d\n", ret); 88 return ret; 89 } 90 } else { 91 /* Set codec sysclk source to its internal clock because codec 92 * PLL will be off when idle and MCLK will also be off by ACPI 93 * when codec is runtime suspended. Codec needs clock for jack 94 * detection and button press. 95 */ 96 ret = snd_soc_dai_set_sysclk(codec_dai, RT5670_SCLK_S_RCCLK, 97 48000 * 512, SND_SOC_CLOCK_IN); 98 if (ret < 0) { 99 dev_err(card->dev, "failed to set codec sysclk: %d\n", ret); 100 return ret; 101 } 102 103 if (ctx->mclk) 104 clk_disable_unprepare(ctx->mclk); 105 } 106 return 0; 107 } 108 109 static const struct snd_soc_dapm_widget cht_dapm_widgets[] = { 110 SND_SOC_DAPM_HP("Headphone", NULL), 111 SND_SOC_DAPM_MIC("Headset Mic", NULL), 112 SND_SOC_DAPM_MIC("Int Mic", NULL), 113 SND_SOC_DAPM_SPK("Ext Spk", NULL), 114 SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0, 115 platform_clock_control, SND_SOC_DAPM_PRE_PMU | 116 SND_SOC_DAPM_POST_PMD), 117 }; 118 119 static const struct snd_soc_dapm_route cht_audio_map[] = { 120 {"IN1P", NULL, "Headset Mic"}, 121 {"IN1N", NULL, "Headset Mic"}, 122 {"DMIC L1", NULL, "Int Mic"}, 123 {"DMIC R1", NULL, "Int Mic"}, 124 {"Headphone", NULL, "HPOL"}, 125 {"Headphone", NULL, "HPOR"}, 126 {"Ext Spk", NULL, "SPOLP"}, 127 {"Ext Spk", NULL, "SPOLN"}, 128 {"Ext Spk", NULL, "SPORP"}, 129 {"Ext Spk", NULL, "SPORN"}, 130 {"Headphone", NULL, "Platform Clock"}, 131 {"Headset Mic", NULL, "Platform Clock"}, 132 {"Int Mic", NULL, "Platform Clock"}, 133 {"Ext Spk", NULL, "Platform Clock"}, 134 }; 135 136 static const struct snd_soc_dapm_route cht_audio_ssp0_map[] = { 137 {"AIF1 Playback", NULL, "ssp0 Tx"}, 138 {"ssp0 Tx", NULL, "modem_out"}, 139 {"modem_in", NULL, "ssp0 Rx"}, 140 {"ssp0 Rx", NULL, "AIF1 Capture"}, 141 }; 142 143 static const struct snd_soc_dapm_route cht_audio_ssp2_map[] = { 144 {"AIF1 Playback", NULL, "ssp2 Tx"}, 145 {"ssp2 Tx", NULL, "codec_out0"}, 146 {"ssp2 Tx", NULL, "codec_out1"}, 147 {"codec_in0", NULL, "ssp2 Rx"}, 148 {"codec_in1", NULL, "ssp2 Rx"}, 149 {"ssp2 Rx", NULL, "AIF1 Capture"}, 150 }; 151 152 static const struct snd_kcontrol_new cht_mc_controls[] = { 153 SOC_DAPM_PIN_SWITCH("Headphone"), 154 SOC_DAPM_PIN_SWITCH("Headset Mic"), 155 SOC_DAPM_PIN_SWITCH("Int Mic"), 156 SOC_DAPM_PIN_SWITCH("Ext Spk"), 157 }; 158 159 static int cht_aif1_hw_params(struct snd_pcm_substream *substream, 160 struct snd_pcm_hw_params *params) 161 { 162 struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream); 163 struct snd_soc_dai *codec_dai = snd_soc_rtd_to_codec(rtd, 0); 164 int ret; 165 166 /* set codec PLL source to the 19.2MHz platform clock (MCLK) */ 167 ret = snd_soc_dai_set_pll(codec_dai, 0, RT5670_PLL1_S_MCLK, 168 CHT_PLAT_CLK_3_HZ, params_rate(params) * 512); 169 if (ret < 0) { 170 dev_err(rtd->dev, "can't set codec pll: %d\n", ret); 171 return ret; 172 } 173 174 /* set codec sysclk source to PLL */ 175 ret = snd_soc_dai_set_sysclk(codec_dai, RT5670_SCLK_S_PLL1, 176 params_rate(params) * 512, 177 SND_SOC_CLOCK_IN); 178 if (ret < 0) { 179 dev_err(rtd->dev, "can't set codec sysclk: %d\n", ret); 180 return ret; 181 } 182 return 0; 183 } 184 185 static const struct acpi_gpio_params headset_gpios = { 0, 0, false }; 186 187 static const struct acpi_gpio_mapping cht_rt5672_gpios[] = { 188 { "headset-gpios", &headset_gpios, 1 }, 189 {}, 190 }; 191 192 static int cht_codec_init(struct snd_soc_pcm_runtime *runtime) 193 { 194 int ret; 195 struct snd_soc_dai *codec_dai = snd_soc_rtd_to_codec(runtime, 0); 196 struct snd_soc_component *component = codec_dai->component; 197 struct cht_mc_private *ctx = snd_soc_card_get_drvdata(runtime->card); 198 199 if (devm_acpi_dev_add_driver_gpios(component->dev, cht_rt5672_gpios)) 200 dev_warn(runtime->dev, "Unable to add GPIO mapping table\n"); 201 202 /* Select codec ASRC clock source to track I2S1 clock, because codec 203 * is in slave mode and 100fs I2S format (BCLK = 100 * LRCLK) cannot 204 * be supported by RT5672. Otherwise, ASRC will be disabled and cause 205 * noise. 206 */ 207 rt5670_sel_asrc_clk_src(component, 208 RT5670_DA_STEREO_FILTER 209 | RT5670_DA_MONO_L_FILTER 210 | RT5670_DA_MONO_R_FILTER 211 | RT5670_AD_STEREO_FILTER 212 | RT5670_AD_MONO_L_FILTER 213 | RT5670_AD_MONO_R_FILTER, 214 RT5670_CLK_SEL_I2S1_ASRC); 215 216 if (ctx->use_ssp0) { 217 ret = snd_soc_dapm_add_routes(&runtime->card->dapm, 218 cht_audio_ssp0_map, 219 ARRAY_SIZE(cht_audio_ssp0_map)); 220 } else { 221 ret = snd_soc_dapm_add_routes(&runtime->card->dapm, 222 cht_audio_ssp2_map, 223 ARRAY_SIZE(cht_audio_ssp2_map)); 224 } 225 if (ret) 226 return ret; 227 228 ret = snd_soc_card_jack_new_pins(runtime->card, "Headset", 229 SND_JACK_HEADSET | SND_JACK_BTN_0 | 230 SND_JACK_BTN_1 | SND_JACK_BTN_2, 231 &ctx->headset, 232 cht_bsw_headset_pins, 233 ARRAY_SIZE(cht_bsw_headset_pins)); 234 if (ret) 235 return ret; 236 237 snd_jack_set_key(ctx->headset.jack, SND_JACK_BTN_0, KEY_PLAYPAUSE); 238 snd_jack_set_key(ctx->headset.jack, SND_JACK_BTN_1, KEY_VOLUMEUP); 239 snd_jack_set_key(ctx->headset.jack, SND_JACK_BTN_2, KEY_VOLUMEDOWN); 240 241 rt5670_set_jack_detect(component, &ctx->headset); 242 if (ctx->mclk) { 243 /* 244 * The firmware might enable the clock at 245 * boot (this information may or may not 246 * be reflected in the enable clock register). 247 * To change the rate we must disable the clock 248 * first to cover these cases. Due to common 249 * clock framework restrictions that do not allow 250 * to disable a clock that has not been enabled, 251 * we need to enable the clock first. 252 */ 253 ret = clk_prepare_enable(ctx->mclk); 254 if (!ret) 255 clk_disable_unprepare(ctx->mclk); 256 257 ret = clk_set_rate(ctx->mclk, CHT_PLAT_CLK_3_HZ); 258 259 if (ret) { 260 dev_err(runtime->dev, "unable to set MCLK rate\n"); 261 return ret; 262 } 263 } 264 return 0; 265 } 266 267 static int cht_codec_fixup(struct snd_soc_pcm_runtime *rtd, 268 struct snd_pcm_hw_params *params) 269 { 270 struct cht_mc_private *ctx = snd_soc_card_get_drvdata(rtd->card); 271 struct snd_interval *rate = hw_param_interval(params, 272 SNDRV_PCM_HW_PARAM_RATE); 273 struct snd_interval *channels = hw_param_interval(params, 274 SNDRV_PCM_HW_PARAM_CHANNELS); 275 int ret, bits; 276 277 /* The DSP will convert the FE rate to 48k, stereo, 24bits */ 278 rate->min = rate->max = 48000; 279 channels->min = channels->max = 2; 280 281 if (ctx->use_ssp0) { 282 /* set SSP0 to 16-bit */ 283 params_set_format(params, SNDRV_PCM_FORMAT_S16_LE); 284 bits = 16; 285 } else { 286 /* set SSP2 to 24-bit */ 287 params_set_format(params, SNDRV_PCM_FORMAT_S24_LE); 288 bits = 24; 289 } 290 291 /* 292 * The default mode for the cpu-dai is TDM 4 slot. The default mode 293 * for the codec-dai is I2S. So we need to either set the cpu-dai to 294 * I2S mode to match the codec-dai, or set the codec-dai to TDM 4 slot 295 * (or program both to yet another mode). 296 * One board, the Lenovo Miix 2 10, uses not 1 but 2 codecs connected 297 * to SSP2. The second piggy-backed, output-only codec is inside the 298 * keyboard-dock (which has extra speakers). Unlike the main rt5672 299 * codec, we cannot configure this codec, it is hard coded to use 300 * 2 channel 24 bit I2S. For this to work we must use I2S mode on this 301 * board. Since we only support 2 channels anyways, there is no need 302 * for TDM on any cht-bsw-rt5672 designs. So we use I2S 2ch everywhere. 303 */ 304 ret = snd_soc_dai_set_fmt(snd_soc_rtd_to_cpu(rtd, 0), 305 SND_SOC_DAIFMT_I2S | 306 SND_SOC_DAIFMT_NB_NF | 307 SND_SOC_DAIFMT_BP_FP); 308 if (ret < 0) { 309 dev_err(rtd->dev, "can't set format to I2S, err %d\n", ret); 310 return ret; 311 } 312 313 ret = snd_soc_dai_set_tdm_slot(snd_soc_rtd_to_cpu(rtd, 0), 0x3, 0x3, 2, bits); 314 if (ret < 0) { 315 dev_err(rtd->dev, "can't set I2S config, err %d\n", ret); 316 return ret; 317 } 318 319 return 0; 320 } 321 322 static int cht_aif1_startup(struct snd_pcm_substream *substream) 323 { 324 return snd_pcm_hw_constraint_single(substream->runtime, 325 SNDRV_PCM_HW_PARAM_RATE, 48000); 326 } 327 328 static const struct snd_soc_ops cht_aif1_ops = { 329 .startup = cht_aif1_startup, 330 }; 331 332 static const struct snd_soc_ops cht_be_ssp2_ops = { 333 .hw_params = cht_aif1_hw_params, 334 }; 335 336 SND_SOC_DAILINK_DEF(dummy, 337 DAILINK_COMP_ARRAY(COMP_DUMMY())); 338 339 SND_SOC_DAILINK_DEF(media, 340 DAILINK_COMP_ARRAY(COMP_CPU("media-cpu-dai"))); 341 342 SND_SOC_DAILINK_DEF(deepbuffer, 343 DAILINK_COMP_ARRAY(COMP_CPU("deepbuffer-cpu-dai"))); 344 345 SND_SOC_DAILINK_DEF(ssp2_port, 346 DAILINK_COMP_ARRAY(COMP_CPU("ssp2-port"))); 347 SND_SOC_DAILINK_DEF(ssp2_codec, 348 DAILINK_COMP_ARRAY(COMP_CODEC("i2c-10EC5670:00", 349 "rt5670-aif1"))); 350 351 SND_SOC_DAILINK_DEF(platform, 352 DAILINK_COMP_ARRAY(COMP_PLATFORM("sst-mfld-platform"))); 353 354 static struct snd_soc_dai_link cht_dailink[] = { 355 /* Front End DAI links */ 356 [MERR_DPCM_AUDIO] = { 357 .name = "Audio Port", 358 .stream_name = "Audio", 359 .nonatomic = true, 360 .dynamic = 1, 361 .dpcm_playback = 1, 362 .dpcm_capture = 1, 363 .ops = &cht_aif1_ops, 364 SND_SOC_DAILINK_REG(media, dummy, platform), 365 }, 366 [MERR_DPCM_DEEP_BUFFER] = { 367 .name = "Deep-Buffer Audio Port", 368 .stream_name = "Deep-Buffer Audio", 369 .nonatomic = true, 370 .dynamic = 1, 371 .dpcm_playback = 1, 372 .ops = &cht_aif1_ops, 373 SND_SOC_DAILINK_REG(deepbuffer, dummy, platform), 374 }, 375 376 /* Back End DAI links */ 377 { 378 /* SSP2 - Codec */ 379 .name = "SSP2-Codec", 380 .id = 0, 381 .no_pcm = 1, 382 .init = cht_codec_init, 383 .be_hw_params_fixup = cht_codec_fixup, 384 .dpcm_playback = 1, 385 .dpcm_capture = 1, 386 .ops = &cht_be_ssp2_ops, 387 SND_SOC_DAILINK_REG(ssp2_port, ssp2_codec, platform), 388 }, 389 }; 390 391 static int cht_suspend_pre(struct snd_soc_card *card) 392 { 393 struct snd_soc_component *component; 394 struct cht_mc_private *ctx = snd_soc_card_get_drvdata(card); 395 396 for_each_card_components(card, component) { 397 if (!strncmp(component->name, 398 ctx->codec_name, sizeof(ctx->codec_name))) { 399 400 dev_dbg(component->dev, "disabling jack detect before going to suspend.\n"); 401 rt5670_jack_suspend(component); 402 break; 403 } 404 } 405 return 0; 406 } 407 408 static int cht_resume_post(struct snd_soc_card *card) 409 { 410 struct snd_soc_component *component; 411 struct cht_mc_private *ctx = snd_soc_card_get_drvdata(card); 412 413 for_each_card_components(card, component) { 414 if (!strncmp(component->name, 415 ctx->codec_name, sizeof(ctx->codec_name))) { 416 417 dev_dbg(component->dev, "enabling jack detect for resume.\n"); 418 rt5670_jack_resume(component); 419 break; 420 } 421 } 422 423 return 0; 424 } 425 426 /* use space before codec name to simplify card ID, and simplify driver name */ 427 #define SOF_CARD_NAME "bytcht rt5672" /* card name will be 'sof-bytcht rt5672' */ 428 #define SOF_DRIVER_NAME "SOF" 429 430 #define CARD_NAME "cht-bsw-rt5672" 431 #define DRIVER_NAME NULL /* card name will be used for driver name */ 432 433 /* SoC card */ 434 static struct snd_soc_card snd_soc_card_cht = { 435 .owner = THIS_MODULE, 436 .dai_link = cht_dailink, 437 .num_links = ARRAY_SIZE(cht_dailink), 438 .dapm_widgets = cht_dapm_widgets, 439 .num_dapm_widgets = ARRAY_SIZE(cht_dapm_widgets), 440 .dapm_routes = cht_audio_map, 441 .num_dapm_routes = ARRAY_SIZE(cht_audio_map), 442 .controls = cht_mc_controls, 443 .num_controls = ARRAY_SIZE(cht_mc_controls), 444 .suspend_pre = cht_suspend_pre, 445 .resume_post = cht_resume_post, 446 }; 447 448 #define RT5672_I2C_DEFAULT "i2c-10EC5670:00" 449 450 static int snd_cht_mc_probe(struct platform_device *pdev) 451 { 452 int ret_val = 0; 453 struct cht_mc_private *drv; 454 struct snd_soc_acpi_mach *mach = pdev->dev.platform_data; 455 const char *platform_name; 456 struct acpi_device *adev; 457 bool sof_parent; 458 int dai_index = 0; 459 int i; 460 461 drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_KERNEL); 462 if (!drv) 463 return -ENOMEM; 464 465 strcpy(drv->codec_name, RT5672_I2C_DEFAULT); 466 467 /* find index of codec dai */ 468 for (i = 0; i < ARRAY_SIZE(cht_dailink); i++) { 469 if (cht_dailink[i].codecs->name && 470 !strcmp(cht_dailink[i].codecs->name, RT5672_I2C_DEFAULT)) { 471 dai_index = i; 472 break; 473 } 474 } 475 476 /* fixup codec name based on HID */ 477 adev = acpi_dev_get_first_match_dev(mach->id, NULL, -1); 478 if (adev) { 479 snprintf(drv->codec_name, sizeof(drv->codec_name), 480 "i2c-%s", acpi_dev_name(adev)); 481 cht_dailink[dai_index].codecs->name = drv->codec_name; 482 } 483 acpi_dev_put(adev); 484 485 /* Use SSP0 on Bay Trail CR devices */ 486 if (soc_intel_is_byt() && mach->mach_params.acpi_ipc_irq_index == 0) { 487 cht_dailink[dai_index].cpus->dai_name = "ssp0-port"; 488 drv->use_ssp0 = true; 489 } 490 491 /* override platform name, if required */ 492 snd_soc_card_cht.dev = &pdev->dev; 493 platform_name = mach->mach_params.platform; 494 495 ret_val = snd_soc_fixup_dai_links_platform_name(&snd_soc_card_cht, 496 platform_name); 497 if (ret_val) 498 return ret_val; 499 500 snd_soc_card_cht.components = rt5670_components(); 501 502 drv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3"); 503 if (IS_ERR(drv->mclk)) { 504 dev_err(&pdev->dev, 505 "Failed to get MCLK from pmc_plt_clk_3: %ld\n", 506 PTR_ERR(drv->mclk)); 507 return PTR_ERR(drv->mclk); 508 } 509 snd_soc_card_set_drvdata(&snd_soc_card_cht, drv); 510 511 sof_parent = snd_soc_acpi_sof_parent(&pdev->dev); 512 513 /* set card and driver name */ 514 if (sof_parent) { 515 snd_soc_card_cht.name = SOF_CARD_NAME; 516 snd_soc_card_cht.driver_name = SOF_DRIVER_NAME; 517 } else { 518 snd_soc_card_cht.name = CARD_NAME; 519 snd_soc_card_cht.driver_name = DRIVER_NAME; 520 } 521 522 /* set pm ops */ 523 if (sof_parent) 524 pdev->dev.driver->pm = &snd_soc_pm_ops; 525 526 /* register the soc card */ 527 ret_val = devm_snd_soc_register_card(&pdev->dev, &snd_soc_card_cht); 528 if (ret_val) { 529 dev_err(&pdev->dev, 530 "snd_soc_register_card failed %d\n", ret_val); 531 return ret_val; 532 } 533 platform_set_drvdata(pdev, &snd_soc_card_cht); 534 return ret_val; 535 } 536 537 static struct platform_driver snd_cht_mc_driver = { 538 .driver = { 539 .name = "cht-bsw-rt5672", 540 }, 541 .probe = snd_cht_mc_probe, 542 }; 543 544 module_platform_driver(snd_cht_mc_driver); 545 546 MODULE_DESCRIPTION("ASoC Intel(R) Baytrail CR Machine driver"); 547 MODULE_AUTHOR("Subhransu S. Prusty, Mengdong Lin"); 548 MODULE_LICENSE("GPL v2"); 549 MODULE_ALIAS("platform:cht-bsw-rt5672"); 550