1 // SPDX-License-Identifier: GPL-2.0 2 // 3 // Freescale P1022RDK ALSA SoC Machine driver 4 // 5 // Author: Timur Tabi <timur@freescale.com> 6 // 7 // Copyright 2012 Freescale Semiconductor, Inc. 8 // 9 // Note: in order for audio to work correctly, the output controls need 10 // to be enabled, because they control the clock. So for playback, for 11 // example: 12 // 13 // amixer sset 'Left Output Mixer PCM' on 14 // amixer sset 'Right Output Mixer PCM' on 15 16 #include <linux/module.h> 17 #include <linux/fsl/guts.h> 18 #include <linux/interrupt.h> 19 #include <linux/of.h> 20 #include <linux/of_address.h> 21 #include <linux/slab.h> 22 #include <sound/soc.h> 23 24 #include "fsl_dma.h" 25 #include "fsl_ssi.h" 26 #include "fsl_utils.h" 27 28 /* P1022-specific PMUXCR and DMUXCR bit definitions */ 29 30 #define CCSR_GUTS_PMUXCR_UART0_I2C1_MASK 0x0001c000 31 #define CCSR_GUTS_PMUXCR_UART0_I2C1_UART0_SSI 0x00010000 32 #define CCSR_GUTS_PMUXCR_UART0_I2C1_SSI 0x00018000 33 34 #define CCSR_GUTS_PMUXCR_SSI_DMA_TDM_MASK 0x00000c00 35 #define CCSR_GUTS_PMUXCR_SSI_DMA_TDM_SSI 0x00000000 36 37 #define CCSR_GUTS_DMUXCR_PAD 1 /* DMA controller/channel set to pad */ 38 #define CCSR_GUTS_DMUXCR_SSI 2 /* DMA controller/channel set to SSI */ 39 40 /* 41 * Set the DMACR register in the GUTS 42 * 43 * The DMACR register determines the source of initiated transfers for each 44 * channel on each DMA controller. Rather than have a bunch of repetitive 45 * macros for the bit patterns, we just have a function that calculates 46 * them. 47 * 48 * guts: Pointer to GUTS structure 49 * co: The DMA controller (0 or 1) 50 * ch: The channel on the DMA controller (0, 1, 2, or 3) 51 * device: The device to set as the target (CCSR_GUTS_DMUXCR_xxx) 52 */ 53 static inline void guts_set_dmuxcr(struct ccsr_guts __iomem *guts, 54 unsigned int co, unsigned int ch, unsigned int device) 55 { 56 unsigned int shift = 16 + (8 * (1 - co) + 2 * (3 - ch)); 57 58 clrsetbits_be32(&guts->dmuxcr, 3 << shift, device << shift); 59 } 60 61 /* There's only one global utilities register */ 62 static phys_addr_t guts_phys; 63 64 /* 65 * machine_data: machine-specific ASoC device data 66 * 67 * This structure contains data for a single sound platform device on an 68 * P1022 RDK. Some of the data is taken from the device tree. 69 */ 70 struct machine_data { 71 struct snd_soc_dai_link dai[2]; 72 struct snd_soc_card card; 73 unsigned int dai_format; 74 unsigned int codec_clk_direction; 75 unsigned int cpu_clk_direction; 76 unsigned int clk_frequency; 77 unsigned int dma_id[2]; /* 0 = DMA1, 1 = DMA2, etc */ 78 unsigned int dma_channel_id[2]; /* 0 = ch 0, 1 = ch 1, etc*/ 79 char platform_name[2][DAI_NAME_SIZE]; /* One for each DMA channel */ 80 }; 81 82 /** 83 * p1022_rdk_machine_probe - initialize the board 84 * @card: ASoC card instance 85 * 86 * This function is used to initialize the board-specific hardware. 87 * 88 * Here we program the DMACR and PMUXCR registers. 89 * 90 * Returns: %0 on success or negative errno value on error 91 */ 92 static int p1022_rdk_machine_probe(struct snd_soc_card *card) 93 { 94 struct machine_data *mdata = 95 container_of(card, struct machine_data, card); 96 struct ccsr_guts __iomem *guts; 97 98 guts = ioremap(guts_phys, sizeof(struct ccsr_guts)); 99 if (!guts) { 100 dev_err(card->dev, "could not map global utilities\n"); 101 return -ENOMEM; 102 } 103 104 /* Enable SSI Tx signal */ 105 clrsetbits_be32(&guts->pmuxcr, CCSR_GUTS_PMUXCR_UART0_I2C1_MASK, 106 CCSR_GUTS_PMUXCR_UART0_I2C1_UART0_SSI); 107 108 /* Enable SSI Rx signal */ 109 clrsetbits_be32(&guts->pmuxcr, CCSR_GUTS_PMUXCR_SSI_DMA_TDM_MASK, 110 CCSR_GUTS_PMUXCR_SSI_DMA_TDM_SSI); 111 112 /* Enable DMA Channel for SSI */ 113 guts_set_dmuxcr(guts, mdata->dma_id[0], mdata->dma_channel_id[0], 114 CCSR_GUTS_DMUXCR_SSI); 115 116 guts_set_dmuxcr(guts, mdata->dma_id[1], mdata->dma_channel_id[1], 117 CCSR_GUTS_DMUXCR_SSI); 118 119 iounmap(guts); 120 121 return 0; 122 } 123 124 /** 125 * p1022_rdk_startup - program the board with various hardware parameters 126 * @substream: ASoC substream object 127 * 128 * This function takes board-specific information, like clock frequencies 129 * and serial data formats, and passes that information to the codec and 130 * transport drivers. 131 * 132 * Returns: %0 on success or negative errno value on error 133 */ 134 static int p1022_rdk_startup(struct snd_pcm_substream *substream) 135 { 136 struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream); 137 struct machine_data *mdata = 138 container_of(rtd->card, struct machine_data, card); 139 struct device *dev = rtd->card->dev; 140 int ret = 0; 141 142 /* Tell the codec driver what the serial protocol is. */ 143 ret = snd_soc_dai_set_fmt(snd_soc_rtd_to_codec(rtd, 0), mdata->dai_format); 144 if (ret < 0) { 145 dev_err(dev, "could not set codec driver audio format (ret=%i)\n", 146 ret); 147 return ret; 148 } 149 150 ret = snd_soc_dai_set_pll(snd_soc_rtd_to_codec(rtd, 0), 0, 0, mdata->clk_frequency, 151 mdata->clk_frequency); 152 if (ret < 0) { 153 dev_err(dev, "could not set codec PLL frequency (ret=%i)\n", 154 ret); 155 return ret; 156 } 157 158 return 0; 159 } 160 161 /** 162 * p1022_rdk_machine_remove - Remove the sound device 163 * @card: ASoC card instance 164 * 165 * This function is called to remove the sound device for one SSI. We 166 * de-program the DMACR and PMUXCR register. 167 * 168 * Returns: %0 on success or negative errno value on error 169 */ 170 static int p1022_rdk_machine_remove(struct snd_soc_card *card) 171 { 172 struct machine_data *mdata = 173 container_of(card, struct machine_data, card); 174 struct ccsr_guts __iomem *guts; 175 176 guts = ioremap(guts_phys, sizeof(struct ccsr_guts)); 177 if (!guts) { 178 dev_err(card->dev, "could not map global utilities\n"); 179 return -ENOMEM; 180 } 181 182 /* Restore the signal routing */ 183 clrbits32(&guts->pmuxcr, CCSR_GUTS_PMUXCR_UART0_I2C1_MASK); 184 clrbits32(&guts->pmuxcr, CCSR_GUTS_PMUXCR_SSI_DMA_TDM_MASK); 185 guts_set_dmuxcr(guts, mdata->dma_id[0], mdata->dma_channel_id[0], 0); 186 guts_set_dmuxcr(guts, mdata->dma_id[1], mdata->dma_channel_id[1], 0); 187 188 iounmap(guts); 189 190 return 0; 191 } 192 193 /* 194 * p1022_rdk_ops: ASoC machine driver operations 195 */ 196 static const struct snd_soc_ops p1022_rdk_ops = { 197 .startup = p1022_rdk_startup, 198 }; 199 200 /** 201 * p1022_rdk_probe - platform probe function for the machine driver 202 * @pdev: platform device pointer 203 * 204 * Although this is a machine driver, the SSI node is the "master" node with 205 * respect to audio hardware connections. Therefore, we create a new ASoC 206 * device for each new SSI node that has a codec attached. 207 * 208 * Returns: %0 on success or negative errno value on error 209 */ 210 static int p1022_rdk_probe(struct platform_device *pdev) 211 { 212 struct device *dev = pdev->dev.parent; 213 /* ssi_pdev is the platform device for the SSI node that probed us */ 214 struct platform_device *ssi_pdev = to_platform_device(dev); 215 struct device_node *np = ssi_pdev->dev.of_node; 216 struct device_node *codec_np = NULL; 217 struct machine_data *mdata; 218 struct snd_soc_dai_link_component *comp; 219 const u32 *iprop; 220 int ret; 221 222 /* Find the codec node for this SSI. */ 223 codec_np = of_parse_phandle(np, "codec-handle", 0); 224 if (!codec_np) { 225 dev_err(dev, "could not find codec node\n"); 226 return -EINVAL; 227 } 228 229 mdata = kzalloc(sizeof(struct machine_data), GFP_KERNEL); 230 if (!mdata) { 231 ret = -ENOMEM; 232 goto error_put; 233 } 234 235 comp = devm_kzalloc(&pdev->dev, 6 * sizeof(*comp), GFP_KERNEL); 236 if (!comp) { 237 ret = -ENOMEM; 238 goto error_put; 239 } 240 241 mdata->dai[0].cpus = &comp[0]; 242 mdata->dai[0].codecs = &comp[1]; 243 mdata->dai[0].platforms = &comp[2]; 244 245 mdata->dai[0].num_cpus = 1; 246 mdata->dai[0].num_codecs = 1; 247 mdata->dai[0].num_platforms = 1; 248 249 mdata->dai[1].cpus = &comp[3]; 250 mdata->dai[1].codecs = &comp[4]; 251 mdata->dai[1].platforms = &comp[5]; 252 253 mdata->dai[1].num_cpus = 1; 254 mdata->dai[1].num_codecs = 1; 255 mdata->dai[1].num_platforms = 1; 256 257 mdata->dai[0].cpus->dai_name = dev_name(&ssi_pdev->dev); 258 mdata->dai[0].ops = &p1022_rdk_ops; 259 260 /* ASoC core can match codec with device node */ 261 mdata->dai[0].codecs->of_node = codec_np; 262 263 /* 264 * We register two DAIs per SSI, one for playback and the other for 265 * capture. We support codecs that have separate DAIs for both playback 266 * and capture. 267 */ 268 memcpy(&mdata->dai[1], &mdata->dai[0], sizeof(struct snd_soc_dai_link)); 269 270 /* The DAI names from the codec (snd_soc_dai_driver.name) */ 271 mdata->dai[0].codecs->dai_name = "wm8960-hifi"; 272 mdata->dai[1].codecs->dai_name = mdata->dai[0].codecs->dai_name; 273 274 /* 275 * Configure the SSI for I2S slave mode. Older device trees have 276 * an fsl,mode property, but we ignore that since there's really 277 * only one way to configure the SSI. 278 */ 279 mdata->dai_format = SND_SOC_DAIFMT_NB_NF | 280 SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBP_CFP; 281 mdata->codec_clk_direction = SND_SOC_CLOCK_OUT; 282 mdata->cpu_clk_direction = SND_SOC_CLOCK_IN; 283 284 /* 285 * In i2s-slave mode, the codec has its own clock source, so we 286 * need to get the frequency from the device tree and pass it to 287 * the codec driver. 288 */ 289 iprop = of_get_property(codec_np, "clock-frequency", NULL); 290 if (!iprop || !*iprop) { 291 dev_err(&pdev->dev, "codec bus-frequency property is missing or invalid\n"); 292 ret = -EINVAL; 293 goto error; 294 } 295 mdata->clk_frequency = be32_to_cpup(iprop); 296 297 if (!mdata->clk_frequency) { 298 dev_err(&pdev->dev, "unknown clock frequency\n"); 299 ret = -EINVAL; 300 goto error; 301 } 302 303 /* Find the playback DMA channel to use. */ 304 mdata->dai[0].platforms->name = mdata->platform_name[0]; 305 ret = fsl_asoc_get_dma_channel(np, "fsl,playback-dma", &mdata->dai[0], 306 &mdata->dma_channel_id[0], 307 &mdata->dma_id[0]); 308 if (ret) { 309 dev_err(&pdev->dev, "missing/invalid playback DMA phandle (ret=%i)\n", 310 ret); 311 goto error; 312 } 313 314 /* Find the capture DMA channel to use. */ 315 mdata->dai[1].platforms->name = mdata->platform_name[1]; 316 ret = fsl_asoc_get_dma_channel(np, "fsl,capture-dma", &mdata->dai[1], 317 &mdata->dma_channel_id[1], 318 &mdata->dma_id[1]); 319 if (ret) { 320 dev_err(&pdev->dev, "missing/invalid capture DMA phandle (ret=%i)\n", 321 ret); 322 goto error; 323 } 324 325 /* Initialize our DAI data structure. */ 326 mdata->dai[0].stream_name = "playback"; 327 mdata->dai[1].stream_name = "capture"; 328 mdata->dai[0].name = mdata->dai[0].stream_name; 329 mdata->dai[1].name = mdata->dai[1].stream_name; 330 331 mdata->card.probe = p1022_rdk_machine_probe; 332 mdata->card.remove = p1022_rdk_machine_remove; 333 mdata->card.name = pdev->name; /* The platform driver name */ 334 mdata->card.owner = THIS_MODULE; 335 mdata->card.dev = &pdev->dev; 336 mdata->card.num_links = 2; 337 mdata->card.dai_link = mdata->dai; 338 339 /* Register with ASoC */ 340 ret = snd_soc_register_card(&mdata->card); 341 if (ret) { 342 dev_err(&pdev->dev, "could not register card (ret=%i)\n", ret); 343 goto error; 344 } 345 346 return 0; 347 348 error: 349 kfree(mdata); 350 error_put: 351 of_node_put(codec_np); 352 return ret; 353 } 354 355 /** 356 * p1022_rdk_remove - remove the platform device 357 * @pdev: platform device pointer 358 * 359 * This function is called when the platform device is removed. 360 */ 361 static void p1022_rdk_remove(struct platform_device *pdev) 362 { 363 struct snd_soc_card *card = platform_get_drvdata(pdev); 364 struct machine_data *mdata = 365 container_of(card, struct machine_data, card); 366 367 snd_soc_unregister_card(card); 368 kfree(mdata); 369 } 370 371 static struct platform_driver p1022_rdk_driver = { 372 .probe = p1022_rdk_probe, 373 .remove = p1022_rdk_remove, 374 .driver = { 375 /* 376 * The name must match 'compatible' property in the device tree, 377 * in lowercase letters. 378 */ 379 .name = "snd-soc-p1022rdk", 380 }, 381 }; 382 383 /** 384 * p1022_rdk_init - machine driver initialization. 385 * 386 * This function is called when this module is loaded. 387 * 388 * Returns: %0 on success or negative errno value on error 389 */ 390 static int __init p1022_rdk_init(void) 391 { 392 struct device_node *guts_np; 393 struct resource res; 394 395 /* Get the physical address of the global utilities registers */ 396 guts_np = of_find_compatible_node(NULL, NULL, "fsl,p1022-guts"); 397 if (of_address_to_resource(guts_np, 0, &res)) { 398 pr_err("snd-soc-p1022rdk: missing/invalid global utils node\n"); 399 of_node_put(guts_np); 400 return -EINVAL; 401 } 402 guts_phys = res.start; 403 of_node_put(guts_np); 404 405 return platform_driver_register(&p1022_rdk_driver); 406 } 407 408 /** 409 * p1022_rdk_exit - machine driver exit 410 * 411 * This function is called when this driver is unloaded. 412 */ 413 static void __exit p1022_rdk_exit(void) 414 { 415 platform_driver_unregister(&p1022_rdk_driver); 416 } 417 418 late_initcall(p1022_rdk_init); 419 module_exit(p1022_rdk_exit); 420 421 MODULE_AUTHOR("Timur Tabi <timur@freescale.com>"); 422 MODULE_DESCRIPTION("Freescale / iVeia P1022 RDK ALSA SoC machine driver"); 423 MODULE_LICENSE("GPL v2"); 424