1 // SPDX-License-Identifier: GPL-2.0 2 // 3 // Freescale P1022DS ALSA SoC Machine driver 4 // 5 // Author: Timur Tabi <timur@freescale.com> 6 // 7 // Copyright 2010 Freescale Semiconductor, Inc. 8 9 #include <linux/module.h> 10 #include <linux/fsl/guts.h> 11 #include <linux/interrupt.h> 12 #include <linux/of.h> 13 #include <linux/of_address.h> 14 #include <linux/slab.h> 15 #include <sound/soc.h> 16 17 #include "fsl_dma.h" 18 #include "fsl_ssi.h" 19 #include "fsl_utils.h" 20 21 /* P1022-specific PMUXCR and DMUXCR bit definitions */ 22 23 #define CCSR_GUTS_PMUXCR_UART0_I2C1_MASK 0x0001c000 24 #define CCSR_GUTS_PMUXCR_UART0_I2C1_UART0_SSI 0x00010000 25 #define CCSR_GUTS_PMUXCR_UART0_I2C1_SSI 0x00018000 26 27 #define CCSR_GUTS_PMUXCR_SSI_DMA_TDM_MASK 0x00000c00 28 #define CCSR_GUTS_PMUXCR_SSI_DMA_TDM_SSI 0x00000000 29 30 #define CCSR_GUTS_DMUXCR_PAD 1 /* DMA controller/channel set to pad */ 31 #define CCSR_GUTS_DMUXCR_SSI 2 /* DMA controller/channel set to SSI */ 32 33 /* 34 * Set the DMACR register in the GUTS 35 * 36 * The DMACR register determines the source of initiated transfers for each 37 * channel on each DMA controller. Rather than have a bunch of repetitive 38 * macros for the bit patterns, we just have a function that calculates 39 * them. 40 * 41 * guts: Pointer to GUTS structure 42 * co: The DMA controller (0 or 1) 43 * ch: The channel on the DMA controller (0, 1, 2, or 3) 44 * device: The device to set as the target (CCSR_GUTS_DMUXCR_xxx) 45 */ 46 static inline void guts_set_dmuxcr(struct ccsr_guts __iomem *guts, 47 unsigned int co, unsigned int ch, unsigned int device) 48 { 49 unsigned int shift = 16 + (8 * (1 - co) + 2 * (3 - ch)); 50 51 clrsetbits_be32(&guts->dmuxcr, 3 << shift, device << shift); 52 } 53 54 /* There's only one global utilities register */ 55 static phys_addr_t guts_phys; 56 57 /** 58 * machine_data: machine-specific ASoC device data 59 * 60 * This structure contains data for a single sound platform device on an 61 * P1022 DS. Some of the data is taken from the device tree. 62 */ 63 struct machine_data { 64 struct snd_soc_dai_link dai[2]; 65 struct snd_soc_card card; 66 unsigned int dai_format; 67 unsigned int codec_clk_direction; 68 unsigned int cpu_clk_direction; 69 unsigned int clk_frequency; 70 unsigned int ssi_id; /* 0 = SSI1, 1 = SSI2, etc */ 71 unsigned int dma_id[2]; /* 0 = DMA1, 1 = DMA2, etc */ 72 unsigned int dma_channel_id[2]; /* 0 = ch 0, 1 = ch 1, etc*/ 73 char platform_name[2][DAI_NAME_SIZE]; /* One for each DMA channel */ 74 }; 75 76 /** 77 * p1022_ds_machine_probe: initialize the board 78 * 79 * This function is used to initialize the board-specific hardware. 80 * 81 * Here we program the DMACR and PMUXCR registers. 82 */ 83 static int p1022_ds_machine_probe(struct snd_soc_card *card) 84 { 85 struct machine_data *mdata = 86 container_of(card, struct machine_data, card); 87 struct ccsr_guts __iomem *guts; 88 89 guts = ioremap(guts_phys, sizeof(struct ccsr_guts)); 90 if (!guts) { 91 dev_err(card->dev, "could not map global utilities\n"); 92 return -ENOMEM; 93 } 94 95 /* Enable SSI Tx signal */ 96 clrsetbits_be32(&guts->pmuxcr, CCSR_GUTS_PMUXCR_UART0_I2C1_MASK, 97 CCSR_GUTS_PMUXCR_UART0_I2C1_UART0_SSI); 98 99 /* Enable SSI Rx signal */ 100 clrsetbits_be32(&guts->pmuxcr, CCSR_GUTS_PMUXCR_SSI_DMA_TDM_MASK, 101 CCSR_GUTS_PMUXCR_SSI_DMA_TDM_SSI); 102 103 /* Enable DMA Channel for SSI */ 104 guts_set_dmuxcr(guts, mdata->dma_id[0], mdata->dma_channel_id[0], 105 CCSR_GUTS_DMUXCR_SSI); 106 107 guts_set_dmuxcr(guts, mdata->dma_id[1], mdata->dma_channel_id[1], 108 CCSR_GUTS_DMUXCR_SSI); 109 110 iounmap(guts); 111 112 return 0; 113 } 114 115 /** 116 * p1022_ds_startup: program the board with various hardware parameters 117 * 118 * This function takes board-specific information, like clock frequencies 119 * and serial data formats, and passes that information to the codec and 120 * transport drivers. 121 */ 122 static int p1022_ds_startup(struct snd_pcm_substream *substream) 123 { 124 struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream); 125 struct machine_data *mdata = 126 container_of(rtd->card, struct machine_data, card); 127 struct device *dev = rtd->card->dev; 128 int ret = 0; 129 130 /* Tell the codec driver what the serial protocol is. */ 131 ret = snd_soc_dai_set_fmt(snd_soc_rtd_to_codec(rtd, 0), mdata->dai_format); 132 if (ret < 0) { 133 dev_err(dev, "could not set codec driver audio format\n"); 134 return ret; 135 } 136 137 /* 138 * Tell the codec driver what the MCLK frequency is, and whether it's 139 * a slave or master. 140 */ 141 ret = snd_soc_dai_set_sysclk(snd_soc_rtd_to_codec(rtd, 0), 0, mdata->clk_frequency, 142 mdata->codec_clk_direction); 143 if (ret < 0) { 144 dev_err(dev, "could not set codec driver clock params\n"); 145 return ret; 146 } 147 148 return 0; 149 } 150 151 /** 152 * p1022_ds_machine_remove: Remove the sound device 153 * 154 * This function is called to remove the sound device for one SSI. We 155 * de-program the DMACR and PMUXCR register. 156 */ 157 static int p1022_ds_machine_remove(struct snd_soc_card *card) 158 { 159 struct machine_data *mdata = 160 container_of(card, struct machine_data, card); 161 struct ccsr_guts __iomem *guts; 162 163 guts = ioremap(guts_phys, sizeof(struct ccsr_guts)); 164 if (!guts) { 165 dev_err(card->dev, "could not map global utilities\n"); 166 return -ENOMEM; 167 } 168 169 /* Restore the signal routing */ 170 clrbits32(&guts->pmuxcr, CCSR_GUTS_PMUXCR_UART0_I2C1_MASK); 171 clrbits32(&guts->pmuxcr, CCSR_GUTS_PMUXCR_SSI_DMA_TDM_MASK); 172 guts_set_dmuxcr(guts, mdata->dma_id[0], mdata->dma_channel_id[0], 0); 173 guts_set_dmuxcr(guts, mdata->dma_id[1], mdata->dma_channel_id[1], 0); 174 175 iounmap(guts); 176 177 return 0; 178 } 179 180 /** 181 * p1022_ds_ops: ASoC machine driver operations 182 */ 183 static const struct snd_soc_ops p1022_ds_ops = { 184 .startup = p1022_ds_startup, 185 }; 186 187 /** 188 * p1022_ds_probe: platform probe function for the machine driver 189 * 190 * Although this is a machine driver, the SSI node is the "master" node with 191 * respect to audio hardware connections. Therefore, we create a new ASoC 192 * device for each new SSI node that has a codec attached. 193 */ 194 static int p1022_ds_probe(struct platform_device *pdev) 195 { 196 struct device *dev = pdev->dev.parent; 197 /* ssi_pdev is the platform device for the SSI node that probed us */ 198 struct platform_device *ssi_pdev = to_platform_device(dev); 199 struct device_node *np = ssi_pdev->dev.of_node; 200 struct device_node *codec_np = NULL; 201 struct machine_data *mdata; 202 struct snd_soc_dai_link_component *comp; 203 int ret; 204 const char *sprop; 205 const u32 *iprop; 206 207 /* Find the codec node for this SSI. */ 208 codec_np = of_parse_phandle(np, "codec-handle", 0); 209 if (!codec_np) { 210 dev_err(dev, "could not find codec node\n"); 211 return -EINVAL; 212 } 213 214 mdata = kzalloc(sizeof(struct machine_data), GFP_KERNEL); 215 if (!mdata) { 216 ret = -ENOMEM; 217 goto error_put; 218 } 219 220 comp = devm_kzalloc(&pdev->dev, 6 * sizeof(*comp), GFP_KERNEL); 221 if (!comp) { 222 ret = -ENOMEM; 223 goto error_put; 224 } 225 226 mdata->dai[0].cpus = &comp[0]; 227 mdata->dai[0].codecs = &comp[1]; 228 mdata->dai[0].platforms = &comp[2]; 229 230 mdata->dai[0].num_cpus = 1; 231 mdata->dai[0].num_codecs = 1; 232 mdata->dai[0].num_platforms = 1; 233 234 mdata->dai[1].cpus = &comp[3]; 235 mdata->dai[1].codecs = &comp[4]; 236 mdata->dai[1].platforms = &comp[5]; 237 238 mdata->dai[1].num_cpus = 1; 239 mdata->dai[1].num_codecs = 1; 240 mdata->dai[1].num_platforms = 1; 241 242 243 mdata->dai[0].cpus->dai_name = dev_name(&ssi_pdev->dev); 244 mdata->dai[0].ops = &p1022_ds_ops; 245 246 /* ASoC core can match codec with device node */ 247 mdata->dai[0].codecs->of_node = codec_np; 248 249 /* We register two DAIs per SSI, one for playback and the other for 250 * capture. We support codecs that have separate DAIs for both playback 251 * and capture. 252 */ 253 memcpy(&mdata->dai[1], &mdata->dai[0], sizeof(struct snd_soc_dai_link)); 254 255 /* The DAI names from the codec (snd_soc_dai_driver.name) */ 256 mdata->dai[0].codecs->dai_name = "wm8776-hifi-playback"; 257 mdata->dai[1].codecs->dai_name = "wm8776-hifi-capture"; 258 259 /* Get the device ID */ 260 iprop = of_get_property(np, "cell-index", NULL); 261 if (!iprop) { 262 dev_err(&pdev->dev, "cell-index property not found\n"); 263 ret = -EINVAL; 264 goto error; 265 } 266 mdata->ssi_id = be32_to_cpup(iprop); 267 268 /* Get the serial format and clock direction. */ 269 sprop = of_get_property(np, "fsl,mode", NULL); 270 if (!sprop) { 271 dev_err(&pdev->dev, "fsl,mode property not found\n"); 272 ret = -EINVAL; 273 goto error; 274 } 275 276 if (strcasecmp(sprop, "i2s-slave") == 0) { 277 mdata->dai_format = SND_SOC_DAIFMT_NB_NF | 278 SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBP_CFP; 279 mdata->codec_clk_direction = SND_SOC_CLOCK_OUT; 280 mdata->cpu_clk_direction = SND_SOC_CLOCK_IN; 281 282 /* In i2s-slave mode, the codec has its own clock source, so we 283 * need to get the frequency from the device tree and pass it to 284 * the codec driver. 285 */ 286 iprop = of_get_property(codec_np, "clock-frequency", NULL); 287 if (!iprop || !*iprop) { 288 dev_err(&pdev->dev, "codec bus-frequency " 289 "property is missing or invalid\n"); 290 ret = -EINVAL; 291 goto error; 292 } 293 mdata->clk_frequency = be32_to_cpup(iprop); 294 } else if (strcasecmp(sprop, "i2s-master") == 0) { 295 mdata->dai_format = SND_SOC_DAIFMT_NB_NF | 296 SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBC_CFC; 297 mdata->codec_clk_direction = SND_SOC_CLOCK_IN; 298 mdata->cpu_clk_direction = SND_SOC_CLOCK_OUT; 299 } else if (strcasecmp(sprop, "lj-slave") == 0) { 300 mdata->dai_format = SND_SOC_DAIFMT_NB_NF | 301 SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBP_CFP; 302 mdata->codec_clk_direction = SND_SOC_CLOCK_OUT; 303 mdata->cpu_clk_direction = SND_SOC_CLOCK_IN; 304 } else if (strcasecmp(sprop, "lj-master") == 0) { 305 mdata->dai_format = SND_SOC_DAIFMT_NB_NF | 306 SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBC_CFC; 307 mdata->codec_clk_direction = SND_SOC_CLOCK_IN; 308 mdata->cpu_clk_direction = SND_SOC_CLOCK_OUT; 309 } else if (strcasecmp(sprop, "rj-slave") == 0) { 310 mdata->dai_format = SND_SOC_DAIFMT_NB_NF | 311 SND_SOC_DAIFMT_RIGHT_J | SND_SOC_DAIFMT_CBP_CFP; 312 mdata->codec_clk_direction = SND_SOC_CLOCK_OUT; 313 mdata->cpu_clk_direction = SND_SOC_CLOCK_IN; 314 } else if (strcasecmp(sprop, "rj-master") == 0) { 315 mdata->dai_format = SND_SOC_DAIFMT_NB_NF | 316 SND_SOC_DAIFMT_RIGHT_J | SND_SOC_DAIFMT_CBC_CFC; 317 mdata->codec_clk_direction = SND_SOC_CLOCK_IN; 318 mdata->cpu_clk_direction = SND_SOC_CLOCK_OUT; 319 } else if (strcasecmp(sprop, "ac97-slave") == 0) { 320 mdata->dai_format = SND_SOC_DAIFMT_NB_NF | 321 SND_SOC_DAIFMT_AC97 | SND_SOC_DAIFMT_CBP_CFP; 322 mdata->codec_clk_direction = SND_SOC_CLOCK_OUT; 323 mdata->cpu_clk_direction = SND_SOC_CLOCK_IN; 324 } else if (strcasecmp(sprop, "ac97-master") == 0) { 325 mdata->dai_format = SND_SOC_DAIFMT_NB_NF | 326 SND_SOC_DAIFMT_AC97 | SND_SOC_DAIFMT_CBC_CFC; 327 mdata->codec_clk_direction = SND_SOC_CLOCK_IN; 328 mdata->cpu_clk_direction = SND_SOC_CLOCK_OUT; 329 } else { 330 dev_err(&pdev->dev, 331 "unrecognized fsl,mode property '%s'\n", sprop); 332 ret = -EINVAL; 333 goto error; 334 } 335 336 if (!mdata->clk_frequency) { 337 dev_err(&pdev->dev, "unknown clock frequency\n"); 338 ret = -EINVAL; 339 goto error; 340 } 341 342 /* Find the playback DMA channel to use. */ 343 mdata->dai[0].platforms->name = mdata->platform_name[0]; 344 ret = fsl_asoc_get_dma_channel(np, "fsl,playback-dma", &mdata->dai[0], 345 &mdata->dma_channel_id[0], 346 &mdata->dma_id[0]); 347 if (ret) { 348 dev_err(&pdev->dev, "missing/invalid playback DMA phandle\n"); 349 goto error; 350 } 351 352 /* Find the capture DMA channel to use. */ 353 mdata->dai[1].platforms->name = mdata->platform_name[1]; 354 ret = fsl_asoc_get_dma_channel(np, "fsl,capture-dma", &mdata->dai[1], 355 &mdata->dma_channel_id[1], 356 &mdata->dma_id[1]); 357 if (ret) { 358 dev_err(&pdev->dev, "missing/invalid capture DMA phandle\n"); 359 goto error; 360 } 361 362 /* Initialize our DAI data structure. */ 363 mdata->dai[0].stream_name = "playback"; 364 mdata->dai[1].stream_name = "capture"; 365 mdata->dai[0].name = mdata->dai[0].stream_name; 366 mdata->dai[1].name = mdata->dai[1].stream_name; 367 368 mdata->card.probe = p1022_ds_machine_probe; 369 mdata->card.remove = p1022_ds_machine_remove; 370 mdata->card.name = pdev->name; /* The platform driver name */ 371 mdata->card.owner = THIS_MODULE; 372 mdata->card.dev = &pdev->dev; 373 mdata->card.num_links = 2; 374 mdata->card.dai_link = mdata->dai; 375 376 /* Register with ASoC */ 377 ret = snd_soc_register_card(&mdata->card); 378 if (ret) { 379 dev_err(&pdev->dev, "could not register card\n"); 380 goto error; 381 } 382 383 of_node_put(codec_np); 384 385 return 0; 386 387 error: 388 kfree(mdata); 389 error_put: 390 of_node_put(codec_np); 391 return ret; 392 } 393 394 /** 395 * p1022_ds_remove: remove the platform device 396 * 397 * This function is called when the platform device is removed. 398 */ 399 static void p1022_ds_remove(struct platform_device *pdev) 400 { 401 struct snd_soc_card *card = platform_get_drvdata(pdev); 402 struct machine_data *mdata = 403 container_of(card, struct machine_data, card); 404 405 snd_soc_unregister_card(card); 406 kfree(mdata); 407 } 408 409 static struct platform_driver p1022_ds_driver = { 410 .probe = p1022_ds_probe, 411 .remove = p1022_ds_remove, 412 .driver = { 413 /* 414 * The name must match 'compatible' property in the device tree, 415 * in lowercase letters. 416 */ 417 .name = "snd-soc-p1022ds", 418 }, 419 }; 420 421 /** 422 * p1022_ds_init: machine driver initialization. 423 * 424 * This function is called when this module is loaded. 425 */ 426 static int __init p1022_ds_init(void) 427 { 428 struct device_node *guts_np; 429 struct resource res; 430 431 /* Get the physical address of the global utilities registers */ 432 guts_np = of_find_compatible_node(NULL, NULL, "fsl,p1022-guts"); 433 if (of_address_to_resource(guts_np, 0, &res)) { 434 pr_err("snd-soc-p1022ds: missing/invalid global utils node\n"); 435 of_node_put(guts_np); 436 return -EINVAL; 437 } 438 guts_phys = res.start; 439 of_node_put(guts_np); 440 441 return platform_driver_register(&p1022_ds_driver); 442 } 443 444 /** 445 * p1022_ds_exit: machine driver exit 446 * 447 * This function is called when this driver is unloaded. 448 */ 449 static void __exit p1022_ds_exit(void) 450 { 451 platform_driver_unregister(&p1022_ds_driver); 452 } 453 454 module_init(p1022_ds_init); 455 module_exit(p1022_ds_exit); 456 457 MODULE_AUTHOR("Timur Tabi <timur@freescale.com>"); 458 MODULE_DESCRIPTION("Freescale P1022 DS ALSA SoC machine driver"); 459 MODULE_LICENSE("GPL v2"); 460