xref: /linux/sound/soc/fsl/lpc3xxx-i2s.h (revision e04e2b760ddbe3d7b283a05898c3a029085cd8cd)
1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /*
3  * Author: Kevin Wells <kevin.wells@nxp.com>
4  *
5  * Copyright (C) 2008 NXP Semiconductors
6  * Copyright 2023 Timesys Corporation <piotr.wojtaszczyk@timesys.com>
7  */
8 
9 #ifndef __SOUND_SOC_LPC3XXX_I2S_H
10 #define __SOUND_SOC_LPC3XXX_I2S_H
11 
12 #include <linux/bitfield.h>
13 #include <linux/types.h>
14 #include <linux/regmap.h>
15 
16 struct lpc3xxx_i2s_info {
17 	struct device *dev;
18 	struct clk *clk;
19 	struct mutex lock; /* To serialize user-space access */
20 	struct regmap *regs;
21 	u32 streams_in_use;
22 	u32 clkrate;
23 	int freq;
24 	struct snd_dmaengine_dai_dma_data playback_dma_config;
25 	struct snd_dmaengine_dai_dma_data capture_dma_config;
26 };
27 
28 int lpc3xxx_pcm_register(struct platform_device *pdev);
29 
30 /* I2S controller register offsets */
31 #define LPC3XXX_REG_I2S_DAO		0x00
32 #define LPC3XXX_REG_I2S_DAI		0x04
33 #define LPC3XXX_REG_I2S_TX_FIFO	0x08
34 #define LPC3XXX_REG_I2S_RX_FIFO	0x0C
35 #define LPC3XXX_REG_I2S_STAT	0x10
36 #define LPC3XXX_REG_I2S_DMA0	0x14
37 #define LPC3XXX_REG_I2S_DMA1	0x18
38 #define LPC3XXX_REG_I2S_IRQ		0x1C
39 #define LPC3XXX_REG_I2S_TX_RATE	0x20
40 #define LPC3XXX_REG_I2S_RX_RATE	0x24
41 
42 /* i2s_daO i2s_dai register definitions */
43 #define LPC3XXX_I2S_WW8      FIELD_PREP(0x3, 0) /* Word width is 8bit */
44 #define LPC3XXX_I2S_WW16     FIELD_PREP(0x3, 1) /* Word width is 16bit */
45 #define LPC3XXX_I2S_WW32     FIELD_PREP(0x3, 3) /* Word width is 32bit */
46 #define LPC3XXX_I2S_MONO     BIT(2)   /* Mono */
47 #define LPC3XXX_I2S_STOP     BIT(3)   /* Stop, diables the access to FIFO, mutes the channel */
48 #define LPC3XXX_I2S_RESET    BIT(4)   /* Reset the channel */
49 #define LPC3XXX_I2S_WS_SEL   BIT(5)   /* Channel Master(0) or slave(1) mode select */
50 #define LPC3XXX_I2S_WS_HP(s) FIELD_PREP(0x7FC0, s) /* Word select half period - 1 */
51 #define LPC3XXX_I2S_MUTE     BIT(15)  /* Mute the channel, Transmit channel only */
52 
53 #define LPC3XXX_I2S_WW32_HP  0x1f /* Word select half period for 32bit word width */
54 #define LPC3XXX_I2S_WW16_HP  0x0f /* Word select half period for 16bit word width */
55 #define LPC3XXX_I2S_WW8_HP   0x7  /* Word select half period for 8bit word width */
56 
57 /* i2s_stat register definitions */
58 #define LPC3XXX_I2S_IRQ_STAT     BIT(0)
59 #define LPC3XXX_I2S_DMA0_REQ     BIT(1)
60 #define LPC3XXX_I2S_DMA1_REQ     BIT(2)
61 
62 /* i2s_dma0 Configuration register definitions */
63 #define LPC3XXX_I2S_DMA0_RX_EN     BIT(0)       /* Enable RX DMA1 */
64 #define LPC3XXX_I2S_DMA0_TX_EN     BIT(1)       /* Enable TX DMA1 */
65 #define LPC3XXX_I2S_DMA0_RX_DEPTH(s) FIELD_PREP(0xF00, s)  /* Set the DMA1 RX Request level */
66 #define LPC3XXX_I2S_DMA0_TX_DEPTH(s) FIELD_PREP(0xF0000, s) /* Set the DMA1 TX Request level */
67 
68 /* i2s_dma1 Configuration register definitions */
69 #define LPC3XXX_I2S_DMA1_RX_EN     BIT(0)       /* Enable RX DMA1 */
70 #define LPC3XXX_I2S_DMA1_TX_EN     BIT(1)       /* Enable TX DMA1 */
71 #define LPC3XXX_I2S_DMA1_RX_DEPTH(s) FIELD_PREP(0x700, s) /* Set the DMA1 RX Request level */
72 #define LPC3XXX_I2S_DMA1_TX_DEPTH(s) FIELD_PREP(0x70000, s) /* Set the DMA1 TX Request level */
73 
74 /* i2s_irq register definitions */
75 #define LPC3XXX_I2S_RX_IRQ_EN     BIT(0)       /* Enable RX IRQ */
76 #define LPC3XXX_I2S_TX_IRQ_EN     BIT(1)       /* Enable TX IRQ */
77 #define LPC3XXX_I2S_IRQ_RX_DEPTH(s)  FIELD_PREP(0xFF00, s)  /* valid values ar 0 to 7 */
78 #define LPC3XXX_I2S_IRQ_TX_DEPTH(s)  FIELD_PREP(0xFF0000, s) /* valid values ar 0 to 7 */
79 
80 #endif
81