1 /* 2 * wm9081.c -- WM9081 ALSA SoC Audio driver 3 * 4 * Author: Mark Brown 5 * 6 * Copyright 2009 Wolfson Microelectronics plc 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License version 2 as 10 * published by the Free Software Foundation. 11 * 12 */ 13 14 #include <linux/module.h> 15 #include <linux/moduleparam.h> 16 #include <linux/init.h> 17 #include <linux/delay.h> 18 #include <linux/device.h> 19 #include <linux/pm.h> 20 #include <linux/i2c.h> 21 #include <linux/regmap.h> 22 #include <linux/slab.h> 23 #include <sound/core.h> 24 #include <sound/pcm.h> 25 #include <sound/pcm_params.h> 26 #include <sound/soc.h> 27 #include <sound/initval.h> 28 #include <sound/tlv.h> 29 30 #include <sound/wm9081.h> 31 #include "wm9081.h" 32 33 static struct reg_default wm9081_reg[] = { 34 { 2, 0x00B9 }, /* R2 - Analogue Lineout */ 35 { 3, 0x00B9 }, /* R3 - Analogue Speaker PGA */ 36 { 4, 0x0001 }, /* R4 - VMID Control */ 37 { 5, 0x0068 }, /* R5 - Bias Control 1 */ 38 { 7, 0x0000 }, /* R7 - Analogue Mixer */ 39 { 8, 0x0000 }, /* R8 - Anti Pop Control */ 40 { 9, 0x01DB }, /* R9 - Analogue Speaker 1 */ 41 { 10, 0x0018 }, /* R10 - Analogue Speaker 2 */ 42 { 11, 0x0180 }, /* R11 - Power Management */ 43 { 12, 0x0000 }, /* R12 - Clock Control 1 */ 44 { 13, 0x0038 }, /* R13 - Clock Control 2 */ 45 { 14, 0x4000 }, /* R14 - Clock Control 3 */ 46 { 16, 0x0000 }, /* R16 - FLL Control 1 */ 47 { 17, 0x0200 }, /* R17 - FLL Control 2 */ 48 { 18, 0x0000 }, /* R18 - FLL Control 3 */ 49 { 19, 0x0204 }, /* R19 - FLL Control 4 */ 50 { 20, 0x0000 }, /* R20 - FLL Control 5 */ 51 { 22, 0x0000 }, /* R22 - Audio Interface 1 */ 52 { 23, 0x0002 }, /* R23 - Audio Interface 2 */ 53 { 24, 0x0008 }, /* R24 - Audio Interface 3 */ 54 { 25, 0x0022 }, /* R25 - Audio Interface 4 */ 55 { 27, 0x0006 }, /* R27 - Interrupt Status Mask */ 56 { 28, 0x0000 }, /* R28 - Interrupt Polarity */ 57 { 29, 0x0000 }, /* R29 - Interrupt Control */ 58 { 30, 0x00C0 }, /* R30 - DAC Digital 1 */ 59 { 31, 0x0008 }, /* R31 - DAC Digital 2 */ 60 { 32, 0x09AF }, /* R32 - DRC 1 */ 61 { 33, 0x4201 }, /* R33 - DRC 2 */ 62 { 34, 0x0000 }, /* R34 - DRC 3 */ 63 { 35, 0x0000 }, /* R35 - DRC 4 */ 64 { 38, 0x0000 }, /* R38 - Write Sequencer 1 */ 65 { 39, 0x0000 }, /* R39 - Write Sequencer 2 */ 66 { 40, 0x0002 }, /* R40 - MW Slave 1 */ 67 { 42, 0x0000 }, /* R42 - EQ 1 */ 68 { 43, 0x0000 }, /* R43 - EQ 2 */ 69 { 44, 0x0FCA }, /* R44 - EQ 3 */ 70 { 45, 0x0400 }, /* R45 - EQ 4 */ 71 { 46, 0x00B8 }, /* R46 - EQ 5 */ 72 { 47, 0x1EB5 }, /* R47 - EQ 6 */ 73 { 48, 0xF145 }, /* R48 - EQ 7 */ 74 { 49, 0x0B75 }, /* R49 - EQ 8 */ 75 { 50, 0x01C5 }, /* R50 - EQ 9 */ 76 { 51, 0x169E }, /* R51 - EQ 10 */ 77 { 52, 0xF829 }, /* R52 - EQ 11 */ 78 { 53, 0x07AD }, /* R53 - EQ 12 */ 79 { 54, 0x1103 }, /* R54 - EQ 13 */ 80 { 55, 0x1C58 }, /* R55 - EQ 14 */ 81 { 56, 0xF373 }, /* R56 - EQ 15 */ 82 { 57, 0x0A54 }, /* R57 - EQ 16 */ 83 { 58, 0x0558 }, /* R58 - EQ 17 */ 84 { 59, 0x0564 }, /* R59 - EQ 18 */ 85 { 60, 0x0559 }, /* R60 - EQ 19 */ 86 { 61, 0x4000 }, /* R61 - EQ 20 */ 87 }; 88 89 static struct { 90 int ratio; 91 int clk_sys_rate; 92 } clk_sys_rates[] = { 93 { 64, 0 }, 94 { 128, 1 }, 95 { 192, 2 }, 96 { 256, 3 }, 97 { 384, 4 }, 98 { 512, 5 }, 99 { 768, 6 }, 100 { 1024, 7 }, 101 { 1408, 8 }, 102 { 1536, 9 }, 103 }; 104 105 static struct { 106 int rate; 107 int sample_rate; 108 } sample_rates[] = { 109 { 8000, 0 }, 110 { 11025, 1 }, 111 { 12000, 2 }, 112 { 16000, 3 }, 113 { 22050, 4 }, 114 { 24000, 5 }, 115 { 32000, 6 }, 116 { 44100, 7 }, 117 { 48000, 8 }, 118 { 88200, 9 }, 119 { 96000, 10 }, 120 }; 121 122 static struct { 123 int div; /* *10 due to .5s */ 124 int bclk_div; 125 } bclk_divs[] = { 126 { 10, 0 }, 127 { 15, 1 }, 128 { 20, 2 }, 129 { 30, 3 }, 130 { 40, 4 }, 131 { 50, 5 }, 132 { 55, 6 }, 133 { 60, 7 }, 134 { 80, 8 }, 135 { 100, 9 }, 136 { 110, 10 }, 137 { 120, 11 }, 138 { 160, 12 }, 139 { 200, 13 }, 140 { 220, 14 }, 141 { 240, 15 }, 142 { 250, 16 }, 143 { 300, 17 }, 144 { 320, 18 }, 145 { 440, 19 }, 146 { 480, 20 }, 147 }; 148 149 struct wm9081_priv { 150 struct regmap *regmap; 151 int sysclk_source; 152 int mclk_rate; 153 int sysclk_rate; 154 int fs; 155 int bclk; 156 int master; 157 int fll_fref; 158 int fll_fout; 159 int tdm_width; 160 struct wm9081_pdata pdata; 161 }; 162 163 static bool wm9081_volatile_register(struct device *dev, unsigned int reg) 164 { 165 switch (reg) { 166 case WM9081_SOFTWARE_RESET: 167 case WM9081_INTERRUPT_STATUS: 168 return true; 169 default: 170 return false; 171 } 172 } 173 174 static bool wm9081_readable_register(struct device *dev, unsigned int reg) 175 { 176 switch (reg) { 177 case WM9081_SOFTWARE_RESET: 178 case WM9081_ANALOGUE_LINEOUT: 179 case WM9081_ANALOGUE_SPEAKER_PGA: 180 case WM9081_VMID_CONTROL: 181 case WM9081_BIAS_CONTROL_1: 182 case WM9081_ANALOGUE_MIXER: 183 case WM9081_ANTI_POP_CONTROL: 184 case WM9081_ANALOGUE_SPEAKER_1: 185 case WM9081_ANALOGUE_SPEAKER_2: 186 case WM9081_POWER_MANAGEMENT: 187 case WM9081_CLOCK_CONTROL_1: 188 case WM9081_CLOCK_CONTROL_2: 189 case WM9081_CLOCK_CONTROL_3: 190 case WM9081_FLL_CONTROL_1: 191 case WM9081_FLL_CONTROL_2: 192 case WM9081_FLL_CONTROL_3: 193 case WM9081_FLL_CONTROL_4: 194 case WM9081_FLL_CONTROL_5: 195 case WM9081_AUDIO_INTERFACE_1: 196 case WM9081_AUDIO_INTERFACE_2: 197 case WM9081_AUDIO_INTERFACE_3: 198 case WM9081_AUDIO_INTERFACE_4: 199 case WM9081_INTERRUPT_STATUS: 200 case WM9081_INTERRUPT_STATUS_MASK: 201 case WM9081_INTERRUPT_POLARITY: 202 case WM9081_INTERRUPT_CONTROL: 203 case WM9081_DAC_DIGITAL_1: 204 case WM9081_DAC_DIGITAL_2: 205 case WM9081_DRC_1: 206 case WM9081_DRC_2: 207 case WM9081_DRC_3: 208 case WM9081_DRC_4: 209 case WM9081_WRITE_SEQUENCER_1: 210 case WM9081_WRITE_SEQUENCER_2: 211 case WM9081_MW_SLAVE_1: 212 case WM9081_EQ_1: 213 case WM9081_EQ_2: 214 case WM9081_EQ_3: 215 case WM9081_EQ_4: 216 case WM9081_EQ_5: 217 case WM9081_EQ_6: 218 case WM9081_EQ_7: 219 case WM9081_EQ_8: 220 case WM9081_EQ_9: 221 case WM9081_EQ_10: 222 case WM9081_EQ_11: 223 case WM9081_EQ_12: 224 case WM9081_EQ_13: 225 case WM9081_EQ_14: 226 case WM9081_EQ_15: 227 case WM9081_EQ_16: 228 case WM9081_EQ_17: 229 case WM9081_EQ_18: 230 case WM9081_EQ_19: 231 case WM9081_EQ_20: 232 return true; 233 default: 234 return false; 235 } 236 } 237 238 static int wm9081_reset(struct regmap *map) 239 { 240 return regmap_write(map, WM9081_SOFTWARE_RESET, 0x9081); 241 } 242 243 static const DECLARE_TLV_DB_SCALE(drc_in_tlv, -4500, 75, 0); 244 static const DECLARE_TLV_DB_SCALE(drc_out_tlv, -2250, 75, 0); 245 static const DECLARE_TLV_DB_SCALE(drc_min_tlv, -1800, 600, 0); 246 static unsigned int drc_max_tlv[] = { 247 TLV_DB_RANGE_HEAD(4), 248 0, 0, TLV_DB_SCALE_ITEM(1200, 0, 0), 249 1, 1, TLV_DB_SCALE_ITEM(1800, 0, 0), 250 2, 2, TLV_DB_SCALE_ITEM(2400, 0, 0), 251 3, 3, TLV_DB_SCALE_ITEM(3600, 0, 0), 252 }; 253 static const DECLARE_TLV_DB_SCALE(drc_qr_tlv, 1200, 600, 0); 254 static const DECLARE_TLV_DB_SCALE(drc_startup_tlv, -300, 50, 0); 255 256 static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0); 257 258 static const DECLARE_TLV_DB_SCALE(in_tlv, -600, 600, 0); 259 static const DECLARE_TLV_DB_SCALE(dac_tlv, -7200, 75, 1); 260 static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0); 261 262 static const char *drc_high_text[] = { 263 "1", 264 "1/2", 265 "1/4", 266 "1/8", 267 "1/16", 268 "0", 269 }; 270 271 static const struct soc_enum drc_high = 272 SOC_ENUM_SINGLE(WM9081_DRC_3, 3, 6, drc_high_text); 273 274 static const char *drc_low_text[] = { 275 "1", 276 "1/2", 277 "1/4", 278 "1/8", 279 "0", 280 }; 281 282 static const struct soc_enum drc_low = 283 SOC_ENUM_SINGLE(WM9081_DRC_3, 0, 5, drc_low_text); 284 285 static const char *drc_atk_text[] = { 286 "181us", 287 "181us", 288 "363us", 289 "726us", 290 "1.45ms", 291 "2.9ms", 292 "5.8ms", 293 "11.6ms", 294 "23.2ms", 295 "46.4ms", 296 "92.8ms", 297 "185.6ms", 298 }; 299 300 static const struct soc_enum drc_atk = 301 SOC_ENUM_SINGLE(WM9081_DRC_2, 12, 12, drc_atk_text); 302 303 static const char *drc_dcy_text[] = { 304 "186ms", 305 "372ms", 306 "743ms", 307 "1.49s", 308 "2.97s", 309 "5.94s", 310 "11.89s", 311 "23.78s", 312 "47.56s", 313 }; 314 315 static const struct soc_enum drc_dcy = 316 SOC_ENUM_SINGLE(WM9081_DRC_2, 8, 9, drc_dcy_text); 317 318 static const char *drc_qr_dcy_text[] = { 319 "0.725ms", 320 "1.45ms", 321 "5.8ms", 322 }; 323 324 static const struct soc_enum drc_qr_dcy = 325 SOC_ENUM_SINGLE(WM9081_DRC_2, 4, 3, drc_qr_dcy_text); 326 327 static const char *dac_deemph_text[] = { 328 "None", 329 "32kHz", 330 "44.1kHz", 331 "48kHz", 332 }; 333 334 static const struct soc_enum dac_deemph = 335 SOC_ENUM_SINGLE(WM9081_DAC_DIGITAL_2, 1, 4, dac_deemph_text); 336 337 static const char *speaker_mode_text[] = { 338 "Class D", 339 "Class AB", 340 }; 341 342 static const struct soc_enum speaker_mode = 343 SOC_ENUM_SINGLE(WM9081_ANALOGUE_SPEAKER_2, 6, 2, speaker_mode_text); 344 345 static int speaker_mode_get(struct snd_kcontrol *kcontrol, 346 struct snd_ctl_elem_value *ucontrol) 347 { 348 struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); 349 unsigned int reg; 350 351 reg = snd_soc_read(codec, WM9081_ANALOGUE_SPEAKER_2); 352 if (reg & WM9081_SPK_MODE) 353 ucontrol->value.integer.value[0] = 1; 354 else 355 ucontrol->value.integer.value[0] = 0; 356 357 return 0; 358 } 359 360 /* 361 * Stop any attempts to change speaker mode while the speaker is enabled. 362 * 363 * We also have some special anti-pop controls dependent on speaker 364 * mode which must be changed along with the mode. 365 */ 366 static int speaker_mode_put(struct snd_kcontrol *kcontrol, 367 struct snd_ctl_elem_value *ucontrol) 368 { 369 struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); 370 unsigned int reg_pwr = snd_soc_read(codec, WM9081_POWER_MANAGEMENT); 371 unsigned int reg2 = snd_soc_read(codec, WM9081_ANALOGUE_SPEAKER_2); 372 373 /* Are we changing anything? */ 374 if (ucontrol->value.integer.value[0] == 375 ((reg2 & WM9081_SPK_MODE) != 0)) 376 return 0; 377 378 /* Don't try to change modes while enabled */ 379 if (reg_pwr & WM9081_SPK_ENA) 380 return -EINVAL; 381 382 if (ucontrol->value.integer.value[0]) { 383 /* Class AB */ 384 reg2 &= ~(WM9081_SPK_INV_MUTE | WM9081_OUT_SPK_CTRL); 385 reg2 |= WM9081_SPK_MODE; 386 } else { 387 /* Class D */ 388 reg2 |= WM9081_SPK_INV_MUTE | WM9081_OUT_SPK_CTRL; 389 reg2 &= ~WM9081_SPK_MODE; 390 } 391 392 snd_soc_write(codec, WM9081_ANALOGUE_SPEAKER_2, reg2); 393 394 return 0; 395 } 396 397 static const struct snd_kcontrol_new wm9081_snd_controls[] = { 398 SOC_SINGLE_TLV("IN1 Volume", WM9081_ANALOGUE_MIXER, 1, 1, 1, in_tlv), 399 SOC_SINGLE_TLV("IN2 Volume", WM9081_ANALOGUE_MIXER, 3, 1, 1, in_tlv), 400 401 SOC_SINGLE_TLV("Playback Volume", WM9081_DAC_DIGITAL_1, 1, 96, 0, dac_tlv), 402 403 SOC_SINGLE("LINEOUT Switch", WM9081_ANALOGUE_LINEOUT, 7, 1, 1), 404 SOC_SINGLE("LINEOUT ZC Switch", WM9081_ANALOGUE_LINEOUT, 6, 1, 0), 405 SOC_SINGLE_TLV("LINEOUT Volume", WM9081_ANALOGUE_LINEOUT, 0, 63, 0, out_tlv), 406 407 SOC_SINGLE("DRC Switch", WM9081_DRC_1, 15, 1, 0), 408 SOC_ENUM("DRC High Slope", drc_high), 409 SOC_ENUM("DRC Low Slope", drc_low), 410 SOC_SINGLE_TLV("DRC Input Volume", WM9081_DRC_4, 5, 60, 1, drc_in_tlv), 411 SOC_SINGLE_TLV("DRC Output Volume", WM9081_DRC_4, 0, 30, 1, drc_out_tlv), 412 SOC_SINGLE_TLV("DRC Minimum Volume", WM9081_DRC_2, 2, 3, 1, drc_min_tlv), 413 SOC_SINGLE_TLV("DRC Maximum Volume", WM9081_DRC_2, 0, 3, 0, drc_max_tlv), 414 SOC_ENUM("DRC Attack", drc_atk), 415 SOC_ENUM("DRC Decay", drc_dcy), 416 SOC_SINGLE("DRC Quick Release Switch", WM9081_DRC_1, 2, 1, 0), 417 SOC_SINGLE_TLV("DRC Quick Release Volume", WM9081_DRC_2, 6, 3, 0, drc_qr_tlv), 418 SOC_ENUM("DRC Quick Release Decay", drc_qr_dcy), 419 SOC_SINGLE_TLV("DRC Startup Volume", WM9081_DRC_1, 6, 18, 0, drc_startup_tlv), 420 421 SOC_SINGLE("EQ Switch", WM9081_EQ_1, 0, 1, 0), 422 423 SOC_SINGLE("Speaker DC Volume", WM9081_ANALOGUE_SPEAKER_1, 3, 5, 0), 424 SOC_SINGLE("Speaker AC Volume", WM9081_ANALOGUE_SPEAKER_1, 0, 5, 0), 425 SOC_SINGLE("Speaker Switch", WM9081_ANALOGUE_SPEAKER_PGA, 7, 1, 1), 426 SOC_SINGLE("Speaker ZC Switch", WM9081_ANALOGUE_SPEAKER_PGA, 6, 1, 0), 427 SOC_SINGLE_TLV("Speaker Volume", WM9081_ANALOGUE_SPEAKER_PGA, 0, 63, 0, 428 out_tlv), 429 SOC_ENUM("DAC Deemphasis", dac_deemph), 430 SOC_ENUM_EXT("Speaker Mode", speaker_mode, speaker_mode_get, speaker_mode_put), 431 }; 432 433 static const struct snd_kcontrol_new wm9081_eq_controls[] = { 434 SOC_SINGLE_TLV("EQ1 Volume", WM9081_EQ_1, 11, 24, 0, eq_tlv), 435 SOC_SINGLE_TLV("EQ2 Volume", WM9081_EQ_1, 6, 24, 0, eq_tlv), 436 SOC_SINGLE_TLV("EQ3 Volume", WM9081_EQ_1, 1, 24, 0, eq_tlv), 437 SOC_SINGLE_TLV("EQ4 Volume", WM9081_EQ_2, 11, 24, 0, eq_tlv), 438 SOC_SINGLE_TLV("EQ5 Volume", WM9081_EQ_2, 6, 24, 0, eq_tlv), 439 }; 440 441 static const struct snd_kcontrol_new mixer[] = { 442 SOC_DAPM_SINGLE("IN1 Switch", WM9081_ANALOGUE_MIXER, 0, 1, 0), 443 SOC_DAPM_SINGLE("IN2 Switch", WM9081_ANALOGUE_MIXER, 2, 1, 0), 444 SOC_DAPM_SINGLE("Playback Switch", WM9081_ANALOGUE_MIXER, 4, 1, 0), 445 }; 446 447 struct _fll_div { 448 u16 fll_fratio; 449 u16 fll_outdiv; 450 u16 fll_clk_ref_div; 451 u16 n; 452 u16 k; 453 }; 454 455 /* The size in bits of the FLL divide multiplied by 10 456 * to allow rounding later */ 457 #define FIXED_FLL_SIZE ((1 << 16) * 10) 458 459 static struct { 460 unsigned int min; 461 unsigned int max; 462 u16 fll_fratio; 463 int ratio; 464 } fll_fratios[] = { 465 { 0, 64000, 4, 16 }, 466 { 64000, 128000, 3, 8 }, 467 { 128000, 256000, 2, 4 }, 468 { 256000, 1000000, 1, 2 }, 469 { 1000000, 13500000, 0, 1 }, 470 }; 471 472 static int fll_factors(struct _fll_div *fll_div, unsigned int Fref, 473 unsigned int Fout) 474 { 475 u64 Kpart; 476 unsigned int K, Ndiv, Nmod, target; 477 unsigned int div; 478 int i; 479 480 /* Fref must be <=13.5MHz */ 481 div = 1; 482 while ((Fref / div) > 13500000) { 483 div *= 2; 484 485 if (div > 8) { 486 pr_err("Can't scale %dMHz input down to <=13.5MHz\n", 487 Fref); 488 return -EINVAL; 489 } 490 } 491 fll_div->fll_clk_ref_div = div / 2; 492 493 pr_debug("Fref=%u Fout=%u\n", Fref, Fout); 494 495 /* Apply the division for our remaining calculations */ 496 Fref /= div; 497 498 /* Fvco should be 90-100MHz; don't check the upper bound */ 499 div = 0; 500 target = Fout * 2; 501 while (target < 90000000) { 502 div++; 503 target *= 2; 504 if (div > 7) { 505 pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n", 506 Fout); 507 return -EINVAL; 508 } 509 } 510 fll_div->fll_outdiv = div; 511 512 pr_debug("Fvco=%dHz\n", target); 513 514 /* Find an appropriate FLL_FRATIO and factor it out of the target */ 515 for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) { 516 if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) { 517 fll_div->fll_fratio = fll_fratios[i].fll_fratio; 518 target /= fll_fratios[i].ratio; 519 break; 520 } 521 } 522 if (i == ARRAY_SIZE(fll_fratios)) { 523 pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref); 524 return -EINVAL; 525 } 526 527 /* Now, calculate N.K */ 528 Ndiv = target / Fref; 529 530 fll_div->n = Ndiv; 531 Nmod = target % Fref; 532 pr_debug("Nmod=%d\n", Nmod); 533 534 /* Calculate fractional part - scale up so we can round. */ 535 Kpart = FIXED_FLL_SIZE * (long long)Nmod; 536 537 do_div(Kpart, Fref); 538 539 K = Kpart & 0xFFFFFFFF; 540 541 if ((K % 10) >= 5) 542 K += 5; 543 544 /* Move down to proper range now rounding is done */ 545 fll_div->k = K / 10; 546 547 pr_debug("N=%x K=%x FLL_FRATIO=%x FLL_OUTDIV=%x FLL_CLK_REF_DIV=%x\n", 548 fll_div->n, fll_div->k, 549 fll_div->fll_fratio, fll_div->fll_outdiv, 550 fll_div->fll_clk_ref_div); 551 552 return 0; 553 } 554 555 static int wm9081_set_fll(struct snd_soc_codec *codec, int fll_id, 556 unsigned int Fref, unsigned int Fout) 557 { 558 struct wm9081_priv *wm9081 = snd_soc_codec_get_drvdata(codec); 559 u16 reg1, reg4, reg5; 560 struct _fll_div fll_div; 561 int ret; 562 int clk_sys_reg; 563 564 /* Any change? */ 565 if (Fref == wm9081->fll_fref && Fout == wm9081->fll_fout) 566 return 0; 567 568 /* Disable the FLL */ 569 if (Fout == 0) { 570 dev_dbg(codec->dev, "FLL disabled\n"); 571 wm9081->fll_fref = 0; 572 wm9081->fll_fout = 0; 573 574 return 0; 575 } 576 577 ret = fll_factors(&fll_div, Fref, Fout); 578 if (ret != 0) 579 return ret; 580 581 reg5 = snd_soc_read(codec, WM9081_FLL_CONTROL_5); 582 reg5 &= ~WM9081_FLL_CLK_SRC_MASK; 583 584 switch (fll_id) { 585 case WM9081_SYSCLK_FLL_MCLK: 586 reg5 |= 0x1; 587 break; 588 589 default: 590 dev_err(codec->dev, "Unknown FLL ID %d\n", fll_id); 591 return -EINVAL; 592 } 593 594 /* Disable CLK_SYS while we reconfigure */ 595 clk_sys_reg = snd_soc_read(codec, WM9081_CLOCK_CONTROL_3); 596 if (clk_sys_reg & WM9081_CLK_SYS_ENA) 597 snd_soc_write(codec, WM9081_CLOCK_CONTROL_3, 598 clk_sys_reg & ~WM9081_CLK_SYS_ENA); 599 600 /* Any FLL configuration change requires that the FLL be 601 * disabled first. */ 602 reg1 = snd_soc_read(codec, WM9081_FLL_CONTROL_1); 603 reg1 &= ~WM9081_FLL_ENA; 604 snd_soc_write(codec, WM9081_FLL_CONTROL_1, reg1); 605 606 /* Apply the configuration */ 607 if (fll_div.k) 608 reg1 |= WM9081_FLL_FRAC_MASK; 609 else 610 reg1 &= ~WM9081_FLL_FRAC_MASK; 611 snd_soc_write(codec, WM9081_FLL_CONTROL_1, reg1); 612 613 snd_soc_write(codec, WM9081_FLL_CONTROL_2, 614 (fll_div.fll_outdiv << WM9081_FLL_OUTDIV_SHIFT) | 615 (fll_div.fll_fratio << WM9081_FLL_FRATIO_SHIFT)); 616 snd_soc_write(codec, WM9081_FLL_CONTROL_3, fll_div.k); 617 618 reg4 = snd_soc_read(codec, WM9081_FLL_CONTROL_4); 619 reg4 &= ~WM9081_FLL_N_MASK; 620 reg4 |= fll_div.n << WM9081_FLL_N_SHIFT; 621 snd_soc_write(codec, WM9081_FLL_CONTROL_4, reg4); 622 623 reg5 &= ~WM9081_FLL_CLK_REF_DIV_MASK; 624 reg5 |= fll_div.fll_clk_ref_div << WM9081_FLL_CLK_REF_DIV_SHIFT; 625 snd_soc_write(codec, WM9081_FLL_CONTROL_5, reg5); 626 627 /* Set gain to the recommended value */ 628 snd_soc_update_bits(codec, WM9081_FLL_CONTROL_4, 629 WM9081_FLL_GAIN_MASK, 0); 630 631 /* Enable the FLL */ 632 snd_soc_write(codec, WM9081_FLL_CONTROL_1, reg1 | WM9081_FLL_ENA); 633 634 /* Then bring CLK_SYS up again if it was disabled */ 635 if (clk_sys_reg & WM9081_CLK_SYS_ENA) 636 snd_soc_write(codec, WM9081_CLOCK_CONTROL_3, clk_sys_reg); 637 638 dev_dbg(codec->dev, "FLL enabled at %dHz->%dHz\n", Fref, Fout); 639 640 wm9081->fll_fref = Fref; 641 wm9081->fll_fout = Fout; 642 643 return 0; 644 } 645 646 static int configure_clock(struct snd_soc_codec *codec) 647 { 648 struct wm9081_priv *wm9081 = snd_soc_codec_get_drvdata(codec); 649 int new_sysclk, i, target; 650 unsigned int reg; 651 int ret = 0; 652 int mclkdiv = 0; 653 int fll = 0; 654 655 switch (wm9081->sysclk_source) { 656 case WM9081_SYSCLK_MCLK: 657 if (wm9081->mclk_rate > 12225000) { 658 mclkdiv = 1; 659 wm9081->sysclk_rate = wm9081->mclk_rate / 2; 660 } else { 661 wm9081->sysclk_rate = wm9081->mclk_rate; 662 } 663 wm9081_set_fll(codec, WM9081_SYSCLK_FLL_MCLK, 0, 0); 664 break; 665 666 case WM9081_SYSCLK_FLL_MCLK: 667 /* If we have a sample rate calculate a CLK_SYS that 668 * gives us a suitable DAC configuration, plus BCLK. 669 * Ideally we would check to see if we can clock 670 * directly from MCLK and only use the FLL if this is 671 * not the case, though care must be taken with free 672 * running mode. 673 */ 674 if (wm9081->master && wm9081->bclk) { 675 /* Make sure we can generate CLK_SYS and BCLK 676 * and that we've got 3MHz for optimal 677 * performance. */ 678 for (i = 0; i < ARRAY_SIZE(clk_sys_rates); i++) { 679 target = wm9081->fs * clk_sys_rates[i].ratio; 680 new_sysclk = target; 681 if (target >= wm9081->bclk && 682 target > 3000000) 683 break; 684 } 685 686 if (i == ARRAY_SIZE(clk_sys_rates)) 687 return -EINVAL; 688 689 } else if (wm9081->fs) { 690 for (i = 0; i < ARRAY_SIZE(clk_sys_rates); i++) { 691 new_sysclk = clk_sys_rates[i].ratio 692 * wm9081->fs; 693 if (new_sysclk > 3000000) 694 break; 695 } 696 697 if (i == ARRAY_SIZE(clk_sys_rates)) 698 return -EINVAL; 699 700 } else { 701 new_sysclk = 12288000; 702 } 703 704 ret = wm9081_set_fll(codec, WM9081_SYSCLK_FLL_MCLK, 705 wm9081->mclk_rate, new_sysclk); 706 if (ret == 0) { 707 wm9081->sysclk_rate = new_sysclk; 708 709 /* Switch SYSCLK over to FLL */ 710 fll = 1; 711 } else { 712 wm9081->sysclk_rate = wm9081->mclk_rate; 713 } 714 break; 715 716 default: 717 return -EINVAL; 718 } 719 720 reg = snd_soc_read(codec, WM9081_CLOCK_CONTROL_1); 721 if (mclkdiv) 722 reg |= WM9081_MCLKDIV2; 723 else 724 reg &= ~WM9081_MCLKDIV2; 725 snd_soc_write(codec, WM9081_CLOCK_CONTROL_1, reg); 726 727 reg = snd_soc_read(codec, WM9081_CLOCK_CONTROL_3); 728 if (fll) 729 reg |= WM9081_CLK_SRC_SEL; 730 else 731 reg &= ~WM9081_CLK_SRC_SEL; 732 snd_soc_write(codec, WM9081_CLOCK_CONTROL_3, reg); 733 734 dev_dbg(codec->dev, "CLK_SYS is %dHz\n", wm9081->sysclk_rate); 735 736 return ret; 737 } 738 739 static int clk_sys_event(struct snd_soc_dapm_widget *w, 740 struct snd_kcontrol *kcontrol, int event) 741 { 742 struct snd_soc_codec *codec = w->codec; 743 struct wm9081_priv *wm9081 = snd_soc_codec_get_drvdata(codec); 744 745 /* This should be done on init() for bypass paths */ 746 switch (wm9081->sysclk_source) { 747 case WM9081_SYSCLK_MCLK: 748 dev_dbg(codec->dev, "Using %dHz MCLK\n", wm9081->mclk_rate); 749 break; 750 case WM9081_SYSCLK_FLL_MCLK: 751 dev_dbg(codec->dev, "Using %dHz MCLK with FLL\n", 752 wm9081->mclk_rate); 753 break; 754 default: 755 dev_err(codec->dev, "System clock not configured\n"); 756 return -EINVAL; 757 } 758 759 switch (event) { 760 case SND_SOC_DAPM_PRE_PMU: 761 configure_clock(codec); 762 break; 763 764 case SND_SOC_DAPM_POST_PMD: 765 /* Disable the FLL if it's running */ 766 wm9081_set_fll(codec, 0, 0, 0); 767 break; 768 } 769 770 return 0; 771 } 772 773 static const struct snd_soc_dapm_widget wm9081_dapm_widgets[] = { 774 SND_SOC_DAPM_INPUT("IN1"), 775 SND_SOC_DAPM_INPUT("IN2"), 776 777 SND_SOC_DAPM_DAC("DAC", "HiFi Playback", WM9081_POWER_MANAGEMENT, 0, 0), 778 779 SND_SOC_DAPM_MIXER_NAMED_CTL("Mixer", SND_SOC_NOPM, 0, 0, 780 mixer, ARRAY_SIZE(mixer)), 781 782 SND_SOC_DAPM_PGA("LINEOUT PGA", WM9081_POWER_MANAGEMENT, 4, 0, NULL, 0), 783 784 SND_SOC_DAPM_PGA("Speaker PGA", WM9081_POWER_MANAGEMENT, 2, 0, NULL, 0), 785 SND_SOC_DAPM_OUT_DRV("Speaker", WM9081_POWER_MANAGEMENT, 1, 0, NULL, 0), 786 787 SND_SOC_DAPM_OUTPUT("LINEOUT"), 788 SND_SOC_DAPM_OUTPUT("SPKN"), 789 SND_SOC_DAPM_OUTPUT("SPKP"), 790 791 SND_SOC_DAPM_SUPPLY("CLK_SYS", WM9081_CLOCK_CONTROL_3, 0, 0, clk_sys_event, 792 SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), 793 SND_SOC_DAPM_SUPPLY("CLK_DSP", WM9081_CLOCK_CONTROL_3, 1, 0, NULL, 0), 794 SND_SOC_DAPM_SUPPLY("TOCLK", WM9081_CLOCK_CONTROL_3, 2, 0, NULL, 0), 795 SND_SOC_DAPM_SUPPLY("TSENSE", WM9081_POWER_MANAGEMENT, 7, 0, NULL, 0), 796 }; 797 798 799 static const struct snd_soc_dapm_route wm9081_audio_paths[] = { 800 { "DAC", NULL, "CLK_SYS" }, 801 { "DAC", NULL, "CLK_DSP" }, 802 803 { "Mixer", "IN1 Switch", "IN1" }, 804 { "Mixer", "IN2 Switch", "IN2" }, 805 { "Mixer", "Playback Switch", "DAC" }, 806 807 { "LINEOUT PGA", NULL, "Mixer" }, 808 { "LINEOUT PGA", NULL, "TOCLK" }, 809 { "LINEOUT PGA", NULL, "CLK_SYS" }, 810 811 { "LINEOUT", NULL, "LINEOUT PGA" }, 812 813 { "Speaker PGA", NULL, "Mixer" }, 814 { "Speaker PGA", NULL, "TOCLK" }, 815 { "Speaker PGA", NULL, "CLK_SYS" }, 816 817 { "Speaker", NULL, "Speaker PGA" }, 818 { "Speaker", NULL, "TSENSE" }, 819 820 { "SPKN", NULL, "Speaker" }, 821 { "SPKP", NULL, "Speaker" }, 822 }; 823 824 static int wm9081_set_bias_level(struct snd_soc_codec *codec, 825 enum snd_soc_bias_level level) 826 { 827 struct wm9081_priv *wm9081 = snd_soc_codec_get_drvdata(codec); 828 829 switch (level) { 830 case SND_SOC_BIAS_ON: 831 break; 832 833 case SND_SOC_BIAS_PREPARE: 834 /* VMID=2*40k */ 835 snd_soc_update_bits(codec, WM9081_VMID_CONTROL, 836 WM9081_VMID_SEL_MASK, 0x2); 837 838 /* Normal bias current */ 839 snd_soc_update_bits(codec, WM9081_BIAS_CONTROL_1, 840 WM9081_STBY_BIAS_ENA, 0); 841 break; 842 843 case SND_SOC_BIAS_STANDBY: 844 /* Initial cold start */ 845 if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) { 846 regcache_cache_only(wm9081->regmap, false); 847 regcache_sync(wm9081->regmap); 848 849 /* Disable LINEOUT discharge */ 850 snd_soc_update_bits(codec, WM9081_ANTI_POP_CONTROL, 851 WM9081_LINEOUT_DISCH, 0); 852 853 /* Select startup bias source */ 854 snd_soc_update_bits(codec, WM9081_BIAS_CONTROL_1, 855 WM9081_BIAS_SRC | WM9081_BIAS_ENA, 856 WM9081_BIAS_SRC | WM9081_BIAS_ENA); 857 858 /* VMID 2*4k; Soft VMID ramp enable */ 859 snd_soc_update_bits(codec, WM9081_VMID_CONTROL, 860 WM9081_VMID_RAMP | 861 WM9081_VMID_SEL_MASK, 862 WM9081_VMID_RAMP | 0x6); 863 864 mdelay(100); 865 866 /* Normal bias enable & soft start off */ 867 snd_soc_update_bits(codec, WM9081_VMID_CONTROL, 868 WM9081_VMID_RAMP, 0); 869 870 /* Standard bias source */ 871 snd_soc_update_bits(codec, WM9081_BIAS_CONTROL_1, 872 WM9081_BIAS_SRC, 0); 873 } 874 875 /* VMID 2*240k */ 876 snd_soc_update_bits(codec, WM9081_VMID_CONTROL, 877 WM9081_VMID_SEL_MASK, 0x04); 878 879 /* Standby bias current on */ 880 snd_soc_update_bits(codec, WM9081_BIAS_CONTROL_1, 881 WM9081_STBY_BIAS_ENA, 882 WM9081_STBY_BIAS_ENA); 883 break; 884 885 case SND_SOC_BIAS_OFF: 886 /* Startup bias source and disable bias */ 887 snd_soc_update_bits(codec, WM9081_BIAS_CONTROL_1, 888 WM9081_BIAS_SRC | WM9081_BIAS_ENA, 889 WM9081_BIAS_SRC); 890 891 /* Disable VMID with soft ramping */ 892 snd_soc_update_bits(codec, WM9081_VMID_CONTROL, 893 WM9081_VMID_RAMP | WM9081_VMID_SEL_MASK, 894 WM9081_VMID_RAMP); 895 896 /* Actively discharge LINEOUT */ 897 snd_soc_update_bits(codec, WM9081_ANTI_POP_CONTROL, 898 WM9081_LINEOUT_DISCH, 899 WM9081_LINEOUT_DISCH); 900 901 regcache_cache_only(wm9081->regmap, true); 902 break; 903 } 904 905 codec->dapm.bias_level = level; 906 907 return 0; 908 } 909 910 static int wm9081_set_dai_fmt(struct snd_soc_dai *dai, 911 unsigned int fmt) 912 { 913 struct snd_soc_codec *codec = dai->codec; 914 struct wm9081_priv *wm9081 = snd_soc_codec_get_drvdata(codec); 915 unsigned int aif2 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_2); 916 917 aif2 &= ~(WM9081_AIF_BCLK_INV | WM9081_AIF_LRCLK_INV | 918 WM9081_BCLK_DIR | WM9081_LRCLK_DIR | WM9081_AIF_FMT_MASK); 919 920 switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { 921 case SND_SOC_DAIFMT_CBS_CFS: 922 wm9081->master = 0; 923 break; 924 case SND_SOC_DAIFMT_CBS_CFM: 925 aif2 |= WM9081_LRCLK_DIR; 926 wm9081->master = 1; 927 break; 928 case SND_SOC_DAIFMT_CBM_CFS: 929 aif2 |= WM9081_BCLK_DIR; 930 wm9081->master = 1; 931 break; 932 case SND_SOC_DAIFMT_CBM_CFM: 933 aif2 |= WM9081_LRCLK_DIR | WM9081_BCLK_DIR; 934 wm9081->master = 1; 935 break; 936 default: 937 return -EINVAL; 938 } 939 940 switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { 941 case SND_SOC_DAIFMT_DSP_B: 942 aif2 |= WM9081_AIF_LRCLK_INV; 943 case SND_SOC_DAIFMT_DSP_A: 944 aif2 |= 0x3; 945 break; 946 case SND_SOC_DAIFMT_I2S: 947 aif2 |= 0x2; 948 break; 949 case SND_SOC_DAIFMT_RIGHT_J: 950 break; 951 case SND_SOC_DAIFMT_LEFT_J: 952 aif2 |= 0x1; 953 break; 954 default: 955 return -EINVAL; 956 } 957 958 switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { 959 case SND_SOC_DAIFMT_DSP_A: 960 case SND_SOC_DAIFMT_DSP_B: 961 /* frame inversion not valid for DSP modes */ 962 switch (fmt & SND_SOC_DAIFMT_INV_MASK) { 963 case SND_SOC_DAIFMT_NB_NF: 964 break; 965 case SND_SOC_DAIFMT_IB_NF: 966 aif2 |= WM9081_AIF_BCLK_INV; 967 break; 968 default: 969 return -EINVAL; 970 } 971 break; 972 973 case SND_SOC_DAIFMT_I2S: 974 case SND_SOC_DAIFMT_RIGHT_J: 975 case SND_SOC_DAIFMT_LEFT_J: 976 switch (fmt & SND_SOC_DAIFMT_INV_MASK) { 977 case SND_SOC_DAIFMT_NB_NF: 978 break; 979 case SND_SOC_DAIFMT_IB_IF: 980 aif2 |= WM9081_AIF_BCLK_INV | WM9081_AIF_LRCLK_INV; 981 break; 982 case SND_SOC_DAIFMT_IB_NF: 983 aif2 |= WM9081_AIF_BCLK_INV; 984 break; 985 case SND_SOC_DAIFMT_NB_IF: 986 aif2 |= WM9081_AIF_LRCLK_INV; 987 break; 988 default: 989 return -EINVAL; 990 } 991 break; 992 default: 993 return -EINVAL; 994 } 995 996 snd_soc_write(codec, WM9081_AUDIO_INTERFACE_2, aif2); 997 998 return 0; 999 } 1000 1001 static int wm9081_hw_params(struct snd_pcm_substream *substream, 1002 struct snd_pcm_hw_params *params, 1003 struct snd_soc_dai *dai) 1004 { 1005 struct snd_soc_codec *codec = dai->codec; 1006 struct wm9081_priv *wm9081 = snd_soc_codec_get_drvdata(codec); 1007 int ret, i, best, best_val, cur_val; 1008 unsigned int clk_ctrl2, aif1, aif2, aif3, aif4; 1009 1010 clk_ctrl2 = snd_soc_read(codec, WM9081_CLOCK_CONTROL_2); 1011 clk_ctrl2 &= ~(WM9081_CLK_SYS_RATE_MASK | WM9081_SAMPLE_RATE_MASK); 1012 1013 aif1 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_1); 1014 1015 aif2 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_2); 1016 aif2 &= ~WM9081_AIF_WL_MASK; 1017 1018 aif3 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_3); 1019 aif3 &= ~WM9081_BCLK_DIV_MASK; 1020 1021 aif4 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_4); 1022 aif4 &= ~WM9081_LRCLK_RATE_MASK; 1023 1024 wm9081->fs = params_rate(params); 1025 1026 if (wm9081->tdm_width) { 1027 /* If TDM is set up then that fixes our BCLK. */ 1028 int slots = ((aif1 & WM9081_AIFDAC_TDM_MODE_MASK) >> 1029 WM9081_AIFDAC_TDM_MODE_SHIFT) + 1; 1030 1031 wm9081->bclk = wm9081->fs * wm9081->tdm_width * slots; 1032 } else { 1033 /* Otherwise work out a BCLK from the sample size */ 1034 wm9081->bclk = 2 * wm9081->fs; 1035 1036 switch (params_format(params)) { 1037 case SNDRV_PCM_FORMAT_S16_LE: 1038 wm9081->bclk *= 16; 1039 break; 1040 case SNDRV_PCM_FORMAT_S20_3LE: 1041 wm9081->bclk *= 20; 1042 aif2 |= 0x4; 1043 break; 1044 case SNDRV_PCM_FORMAT_S24_LE: 1045 wm9081->bclk *= 24; 1046 aif2 |= 0x8; 1047 break; 1048 case SNDRV_PCM_FORMAT_S32_LE: 1049 wm9081->bclk *= 32; 1050 aif2 |= 0xc; 1051 break; 1052 default: 1053 return -EINVAL; 1054 } 1055 } 1056 1057 dev_dbg(codec->dev, "Target BCLK is %dHz\n", wm9081->bclk); 1058 1059 ret = configure_clock(codec); 1060 if (ret != 0) 1061 return ret; 1062 1063 /* Select nearest CLK_SYS_RATE */ 1064 best = 0; 1065 best_val = abs((wm9081->sysclk_rate / clk_sys_rates[0].ratio) 1066 - wm9081->fs); 1067 for (i = 1; i < ARRAY_SIZE(clk_sys_rates); i++) { 1068 cur_val = abs((wm9081->sysclk_rate / 1069 clk_sys_rates[i].ratio) - wm9081->fs); 1070 if (cur_val < best_val) { 1071 best = i; 1072 best_val = cur_val; 1073 } 1074 } 1075 dev_dbg(codec->dev, "Selected CLK_SYS_RATIO of %d\n", 1076 clk_sys_rates[best].ratio); 1077 clk_ctrl2 |= (clk_sys_rates[best].clk_sys_rate 1078 << WM9081_CLK_SYS_RATE_SHIFT); 1079 1080 /* SAMPLE_RATE */ 1081 best = 0; 1082 best_val = abs(wm9081->fs - sample_rates[0].rate); 1083 for (i = 1; i < ARRAY_SIZE(sample_rates); i++) { 1084 /* Closest match */ 1085 cur_val = abs(wm9081->fs - sample_rates[i].rate); 1086 if (cur_val < best_val) { 1087 best = i; 1088 best_val = cur_val; 1089 } 1090 } 1091 dev_dbg(codec->dev, "Selected SAMPLE_RATE of %dHz\n", 1092 sample_rates[best].rate); 1093 clk_ctrl2 |= (sample_rates[best].sample_rate 1094 << WM9081_SAMPLE_RATE_SHIFT); 1095 1096 /* BCLK_DIV */ 1097 best = 0; 1098 best_val = INT_MAX; 1099 for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) { 1100 cur_val = ((wm9081->sysclk_rate * 10) / bclk_divs[i].div) 1101 - wm9081->bclk; 1102 if (cur_val < 0) /* Table is sorted */ 1103 break; 1104 if (cur_val < best_val) { 1105 best = i; 1106 best_val = cur_val; 1107 } 1108 } 1109 wm9081->bclk = (wm9081->sysclk_rate * 10) / bclk_divs[best].div; 1110 dev_dbg(codec->dev, "Selected BCLK_DIV of %d for %dHz BCLK\n", 1111 bclk_divs[best].div, wm9081->bclk); 1112 aif3 |= bclk_divs[best].bclk_div; 1113 1114 /* LRCLK is a simple fraction of BCLK */ 1115 dev_dbg(codec->dev, "LRCLK_RATE is %d\n", wm9081->bclk / wm9081->fs); 1116 aif4 |= wm9081->bclk / wm9081->fs; 1117 1118 /* Apply a ReTune Mobile configuration if it's in use */ 1119 if (wm9081->pdata.num_retune_configs) { 1120 struct wm9081_pdata *pdata = &wm9081->pdata; 1121 struct wm9081_retune_mobile_setting *s; 1122 int eq1; 1123 1124 best = 0; 1125 best_val = abs(pdata->retune_configs[0].rate - wm9081->fs); 1126 for (i = 0; i < pdata->num_retune_configs; i++) { 1127 cur_val = abs(pdata->retune_configs[i].rate - 1128 wm9081->fs); 1129 if (cur_val < best_val) { 1130 best_val = cur_val; 1131 best = i; 1132 } 1133 } 1134 s = &pdata->retune_configs[best]; 1135 1136 dev_dbg(codec->dev, "ReTune Mobile %s tuned for %dHz\n", 1137 s->name, s->rate); 1138 1139 /* If the EQ is enabled then disable it while we write out */ 1140 eq1 = snd_soc_read(codec, WM9081_EQ_1) & WM9081_EQ_ENA; 1141 if (eq1 & WM9081_EQ_ENA) 1142 snd_soc_write(codec, WM9081_EQ_1, 0); 1143 1144 /* Write out the other values */ 1145 for (i = 1; i < ARRAY_SIZE(s->config); i++) 1146 snd_soc_write(codec, WM9081_EQ_1 + i, s->config[i]); 1147 1148 eq1 |= (s->config[0] & ~WM9081_EQ_ENA); 1149 snd_soc_write(codec, WM9081_EQ_1, eq1); 1150 } 1151 1152 snd_soc_write(codec, WM9081_CLOCK_CONTROL_2, clk_ctrl2); 1153 snd_soc_write(codec, WM9081_AUDIO_INTERFACE_2, aif2); 1154 snd_soc_write(codec, WM9081_AUDIO_INTERFACE_3, aif3); 1155 snd_soc_write(codec, WM9081_AUDIO_INTERFACE_4, aif4); 1156 1157 return 0; 1158 } 1159 1160 static int wm9081_digital_mute(struct snd_soc_dai *codec_dai, int mute) 1161 { 1162 struct snd_soc_codec *codec = codec_dai->codec; 1163 unsigned int reg; 1164 1165 reg = snd_soc_read(codec, WM9081_DAC_DIGITAL_2); 1166 1167 if (mute) 1168 reg |= WM9081_DAC_MUTE; 1169 else 1170 reg &= ~WM9081_DAC_MUTE; 1171 1172 snd_soc_write(codec, WM9081_DAC_DIGITAL_2, reg); 1173 1174 return 0; 1175 } 1176 1177 static int wm9081_set_sysclk(struct snd_soc_codec *codec, int clk_id, 1178 int source, unsigned int freq, int dir) 1179 { 1180 struct wm9081_priv *wm9081 = snd_soc_codec_get_drvdata(codec); 1181 1182 switch (clk_id) { 1183 case WM9081_SYSCLK_MCLK: 1184 case WM9081_SYSCLK_FLL_MCLK: 1185 wm9081->sysclk_source = clk_id; 1186 wm9081->mclk_rate = freq; 1187 break; 1188 1189 default: 1190 return -EINVAL; 1191 } 1192 1193 return 0; 1194 } 1195 1196 static int wm9081_set_tdm_slot(struct snd_soc_dai *dai, 1197 unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width) 1198 { 1199 struct snd_soc_codec *codec = dai->codec; 1200 struct wm9081_priv *wm9081 = snd_soc_codec_get_drvdata(codec); 1201 unsigned int aif1 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_1); 1202 1203 aif1 &= ~(WM9081_AIFDAC_TDM_SLOT_MASK | WM9081_AIFDAC_TDM_MODE_MASK); 1204 1205 if (slots < 0 || slots > 4) 1206 return -EINVAL; 1207 1208 wm9081->tdm_width = slot_width; 1209 1210 if (slots == 0) 1211 slots = 1; 1212 1213 aif1 |= (slots - 1) << WM9081_AIFDAC_TDM_MODE_SHIFT; 1214 1215 switch (rx_mask) { 1216 case 1: 1217 break; 1218 case 2: 1219 aif1 |= 0x10; 1220 break; 1221 case 4: 1222 aif1 |= 0x20; 1223 break; 1224 case 8: 1225 aif1 |= 0x30; 1226 break; 1227 default: 1228 return -EINVAL; 1229 } 1230 1231 snd_soc_write(codec, WM9081_AUDIO_INTERFACE_1, aif1); 1232 1233 return 0; 1234 } 1235 1236 #define WM9081_RATES SNDRV_PCM_RATE_8000_96000 1237 1238 #define WM9081_FORMATS \ 1239 (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ 1240 SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) 1241 1242 static const struct snd_soc_dai_ops wm9081_dai_ops = { 1243 .hw_params = wm9081_hw_params, 1244 .set_fmt = wm9081_set_dai_fmt, 1245 .digital_mute = wm9081_digital_mute, 1246 .set_tdm_slot = wm9081_set_tdm_slot, 1247 }; 1248 1249 /* We report two channels because the CODEC processes a stereo signal, even 1250 * though it is only capable of handling a mono output. 1251 */ 1252 static struct snd_soc_dai_driver wm9081_dai = { 1253 .name = "wm9081-hifi", 1254 .playback = { 1255 .stream_name = "HiFi Playback", 1256 .channels_min = 1, 1257 .channels_max = 2, 1258 .rates = WM9081_RATES, 1259 .formats = WM9081_FORMATS, 1260 }, 1261 .ops = &wm9081_dai_ops, 1262 }; 1263 1264 static int wm9081_probe(struct snd_soc_codec *codec) 1265 { 1266 struct wm9081_priv *wm9081 = snd_soc_codec_get_drvdata(codec); 1267 int ret; 1268 1269 codec->control_data = wm9081->regmap; 1270 1271 ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_REGMAP); 1272 if (ret != 0) { 1273 dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret); 1274 return ret; 1275 } 1276 1277 /* Enable zero cross by default */ 1278 snd_soc_update_bits(codec, WM9081_ANALOGUE_LINEOUT, 1279 WM9081_LINEOUTZC, WM9081_LINEOUTZC); 1280 snd_soc_update_bits(codec, WM9081_ANALOGUE_SPEAKER_PGA, 1281 WM9081_SPKPGAZC, WM9081_SPKPGAZC); 1282 1283 if (!wm9081->pdata.num_retune_configs) { 1284 dev_dbg(codec->dev, 1285 "No ReTune Mobile data, using normal EQ\n"); 1286 snd_soc_add_codec_controls(codec, wm9081_eq_controls, 1287 ARRAY_SIZE(wm9081_eq_controls)); 1288 } 1289 1290 return ret; 1291 } 1292 1293 static int wm9081_remove(struct snd_soc_codec *codec) 1294 { 1295 wm9081_set_bias_level(codec, SND_SOC_BIAS_OFF); 1296 return 0; 1297 } 1298 1299 static struct snd_soc_codec_driver soc_codec_dev_wm9081 = { 1300 .probe = wm9081_probe, 1301 .remove = wm9081_remove, 1302 1303 .set_sysclk = wm9081_set_sysclk, 1304 .set_bias_level = wm9081_set_bias_level, 1305 1306 .idle_bias_off = true, 1307 1308 .controls = wm9081_snd_controls, 1309 .num_controls = ARRAY_SIZE(wm9081_snd_controls), 1310 .dapm_widgets = wm9081_dapm_widgets, 1311 .num_dapm_widgets = ARRAY_SIZE(wm9081_dapm_widgets), 1312 .dapm_routes = wm9081_audio_paths, 1313 .num_dapm_routes = ARRAY_SIZE(wm9081_audio_paths), 1314 }; 1315 1316 static const struct regmap_config wm9081_regmap = { 1317 .reg_bits = 8, 1318 .val_bits = 16, 1319 1320 .max_register = WM9081_MAX_REGISTER, 1321 .reg_defaults = wm9081_reg, 1322 .num_reg_defaults = ARRAY_SIZE(wm9081_reg), 1323 .volatile_reg = wm9081_volatile_register, 1324 .readable_reg = wm9081_readable_register, 1325 .cache_type = REGCACHE_RBTREE, 1326 }; 1327 1328 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) 1329 static __devinit int wm9081_i2c_probe(struct i2c_client *i2c, 1330 const struct i2c_device_id *id) 1331 { 1332 struct wm9081_priv *wm9081; 1333 unsigned int reg; 1334 int ret; 1335 1336 wm9081 = devm_kzalloc(&i2c->dev, sizeof(struct wm9081_priv), 1337 GFP_KERNEL); 1338 if (wm9081 == NULL) 1339 return -ENOMEM; 1340 1341 i2c_set_clientdata(i2c, wm9081); 1342 1343 wm9081->regmap = regmap_init_i2c(i2c, &wm9081_regmap); 1344 if (IS_ERR(wm9081->regmap)) { 1345 ret = PTR_ERR(wm9081->regmap); 1346 dev_err(&i2c->dev, "regmap_init() failed: %d\n", ret); 1347 goto err; 1348 } 1349 1350 ret = regmap_read(wm9081->regmap, WM9081_SOFTWARE_RESET, ®); 1351 if (ret != 0) { 1352 dev_err(&i2c->dev, "Failed to read chip ID: %d\n", ret); 1353 goto err_regmap; 1354 } 1355 if (reg != 0x9081) { 1356 dev_err(&i2c->dev, "Device is not a WM9081: ID=0x%x\n", reg); 1357 ret = -EINVAL; 1358 goto err_regmap; 1359 } 1360 1361 ret = wm9081_reset(wm9081->regmap); 1362 if (ret < 0) { 1363 dev_err(&i2c->dev, "Failed to issue reset\n"); 1364 goto err_regmap; 1365 } 1366 1367 if (dev_get_platdata(&i2c->dev)) 1368 memcpy(&wm9081->pdata, dev_get_platdata(&i2c->dev), 1369 sizeof(wm9081->pdata)); 1370 1371 reg = 0; 1372 if (wm9081->pdata.irq_high) 1373 reg |= WM9081_IRQ_POL; 1374 if (!wm9081->pdata.irq_cmos) 1375 reg |= WM9081_IRQ_OP_CTRL; 1376 regmap_update_bits(wm9081->regmap, WM9081_INTERRUPT_CONTROL, 1377 WM9081_IRQ_POL | WM9081_IRQ_OP_CTRL, reg); 1378 1379 regcache_cache_only(wm9081->regmap, true); 1380 1381 ret = snd_soc_register_codec(&i2c->dev, 1382 &soc_codec_dev_wm9081, &wm9081_dai, 1); 1383 if (ret < 0) 1384 goto err_regmap; 1385 1386 return 0; 1387 1388 err_regmap: 1389 regmap_exit(wm9081->regmap); 1390 err: 1391 1392 return ret; 1393 } 1394 1395 static __devexit int wm9081_i2c_remove(struct i2c_client *client) 1396 { 1397 struct wm9081_priv *wm9081 = i2c_get_clientdata(client); 1398 1399 snd_soc_unregister_codec(&client->dev); 1400 regmap_exit(wm9081->regmap); 1401 return 0; 1402 } 1403 1404 static const struct i2c_device_id wm9081_i2c_id[] = { 1405 { "wm9081", 0 }, 1406 { } 1407 }; 1408 MODULE_DEVICE_TABLE(i2c, wm9081_i2c_id); 1409 1410 static struct i2c_driver wm9081_i2c_driver = { 1411 .driver = { 1412 .name = "wm9081", 1413 .owner = THIS_MODULE, 1414 }, 1415 .probe = wm9081_i2c_probe, 1416 .remove = __devexit_p(wm9081_i2c_remove), 1417 .id_table = wm9081_i2c_id, 1418 }; 1419 #endif 1420 1421 module_i2c_driver(wm9081_i2c_driver); 1422 1423 MODULE_DESCRIPTION("ASoC WM9081 driver"); 1424 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); 1425 MODULE_LICENSE("GPL"); 1426