1 /* 2 * wm9081.c -- WM9081 ALSA SoC Audio driver 3 * 4 * Author: Mark Brown 5 * 6 * Copyright 2009-12 Wolfson Microelectronics plc 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License version 2 as 10 * published by the Free Software Foundation. 11 * 12 */ 13 14 #include <linux/module.h> 15 #include <linux/moduleparam.h> 16 #include <linux/init.h> 17 #include <linux/delay.h> 18 #include <linux/device.h> 19 #include <linux/pm.h> 20 #include <linux/i2c.h> 21 #include <linux/regmap.h> 22 #include <linux/slab.h> 23 #include <sound/core.h> 24 #include <sound/pcm.h> 25 #include <sound/pcm_params.h> 26 #include <sound/soc.h> 27 #include <sound/initval.h> 28 #include <sound/tlv.h> 29 30 #include <sound/wm9081.h> 31 #include "wm9081.h" 32 33 static struct reg_default wm9081_reg[] = { 34 { 2, 0x00B9 }, /* R2 - Analogue Lineout */ 35 { 3, 0x00B9 }, /* R3 - Analogue Speaker PGA */ 36 { 4, 0x0001 }, /* R4 - VMID Control */ 37 { 5, 0x0068 }, /* R5 - Bias Control 1 */ 38 { 7, 0x0000 }, /* R7 - Analogue Mixer */ 39 { 8, 0x0000 }, /* R8 - Anti Pop Control */ 40 { 9, 0x01DB }, /* R9 - Analogue Speaker 1 */ 41 { 10, 0x0018 }, /* R10 - Analogue Speaker 2 */ 42 { 11, 0x0180 }, /* R11 - Power Management */ 43 { 12, 0x0000 }, /* R12 - Clock Control 1 */ 44 { 13, 0x0038 }, /* R13 - Clock Control 2 */ 45 { 14, 0x4000 }, /* R14 - Clock Control 3 */ 46 { 16, 0x0000 }, /* R16 - FLL Control 1 */ 47 { 17, 0x0200 }, /* R17 - FLL Control 2 */ 48 { 18, 0x0000 }, /* R18 - FLL Control 3 */ 49 { 19, 0x0204 }, /* R19 - FLL Control 4 */ 50 { 20, 0x0000 }, /* R20 - FLL Control 5 */ 51 { 22, 0x0000 }, /* R22 - Audio Interface 1 */ 52 { 23, 0x0002 }, /* R23 - Audio Interface 2 */ 53 { 24, 0x0008 }, /* R24 - Audio Interface 3 */ 54 { 25, 0x0022 }, /* R25 - Audio Interface 4 */ 55 { 27, 0x0006 }, /* R27 - Interrupt Status Mask */ 56 { 28, 0x0000 }, /* R28 - Interrupt Polarity */ 57 { 29, 0x0000 }, /* R29 - Interrupt Control */ 58 { 30, 0x00C0 }, /* R30 - DAC Digital 1 */ 59 { 31, 0x0008 }, /* R31 - DAC Digital 2 */ 60 { 32, 0x09AF }, /* R32 - DRC 1 */ 61 { 33, 0x4201 }, /* R33 - DRC 2 */ 62 { 34, 0x0000 }, /* R34 - DRC 3 */ 63 { 35, 0x0000 }, /* R35 - DRC 4 */ 64 { 38, 0x0000 }, /* R38 - Write Sequencer 1 */ 65 { 39, 0x0000 }, /* R39 - Write Sequencer 2 */ 66 { 40, 0x0002 }, /* R40 - MW Slave 1 */ 67 { 42, 0x0000 }, /* R42 - EQ 1 */ 68 { 43, 0x0000 }, /* R43 - EQ 2 */ 69 { 44, 0x0FCA }, /* R44 - EQ 3 */ 70 { 45, 0x0400 }, /* R45 - EQ 4 */ 71 { 46, 0x00B8 }, /* R46 - EQ 5 */ 72 { 47, 0x1EB5 }, /* R47 - EQ 6 */ 73 { 48, 0xF145 }, /* R48 - EQ 7 */ 74 { 49, 0x0B75 }, /* R49 - EQ 8 */ 75 { 50, 0x01C5 }, /* R50 - EQ 9 */ 76 { 51, 0x169E }, /* R51 - EQ 10 */ 77 { 52, 0xF829 }, /* R52 - EQ 11 */ 78 { 53, 0x07AD }, /* R53 - EQ 12 */ 79 { 54, 0x1103 }, /* R54 - EQ 13 */ 80 { 55, 0x1C58 }, /* R55 - EQ 14 */ 81 { 56, 0xF373 }, /* R56 - EQ 15 */ 82 { 57, 0x0A54 }, /* R57 - EQ 16 */ 83 { 58, 0x0558 }, /* R58 - EQ 17 */ 84 { 59, 0x0564 }, /* R59 - EQ 18 */ 85 { 60, 0x0559 }, /* R60 - EQ 19 */ 86 { 61, 0x4000 }, /* R61 - EQ 20 */ 87 }; 88 89 static struct { 90 int ratio; 91 int clk_sys_rate; 92 } clk_sys_rates[] = { 93 { 64, 0 }, 94 { 128, 1 }, 95 { 192, 2 }, 96 { 256, 3 }, 97 { 384, 4 }, 98 { 512, 5 }, 99 { 768, 6 }, 100 { 1024, 7 }, 101 { 1408, 8 }, 102 { 1536, 9 }, 103 }; 104 105 static struct { 106 int rate; 107 int sample_rate; 108 } sample_rates[] = { 109 { 8000, 0 }, 110 { 11025, 1 }, 111 { 12000, 2 }, 112 { 16000, 3 }, 113 { 22050, 4 }, 114 { 24000, 5 }, 115 { 32000, 6 }, 116 { 44100, 7 }, 117 { 48000, 8 }, 118 { 88200, 9 }, 119 { 96000, 10 }, 120 }; 121 122 static struct { 123 int div; /* *10 due to .5s */ 124 int bclk_div; 125 } bclk_divs[] = { 126 { 10, 0 }, 127 { 15, 1 }, 128 { 20, 2 }, 129 { 30, 3 }, 130 { 40, 4 }, 131 { 50, 5 }, 132 { 55, 6 }, 133 { 60, 7 }, 134 { 80, 8 }, 135 { 100, 9 }, 136 { 110, 10 }, 137 { 120, 11 }, 138 { 160, 12 }, 139 { 200, 13 }, 140 { 220, 14 }, 141 { 240, 15 }, 142 { 250, 16 }, 143 { 300, 17 }, 144 { 320, 18 }, 145 { 440, 19 }, 146 { 480, 20 }, 147 }; 148 149 struct wm9081_priv { 150 struct regmap *regmap; 151 int sysclk_source; 152 int mclk_rate; 153 int sysclk_rate; 154 int fs; 155 int bclk; 156 int master; 157 int fll_fref; 158 int fll_fout; 159 int tdm_width; 160 struct wm9081_pdata pdata; 161 }; 162 163 static bool wm9081_volatile_register(struct device *dev, unsigned int reg) 164 { 165 switch (reg) { 166 case WM9081_SOFTWARE_RESET: 167 case WM9081_INTERRUPT_STATUS: 168 return true; 169 default: 170 return false; 171 } 172 } 173 174 static bool wm9081_readable_register(struct device *dev, unsigned int reg) 175 { 176 switch (reg) { 177 case WM9081_SOFTWARE_RESET: 178 case WM9081_ANALOGUE_LINEOUT: 179 case WM9081_ANALOGUE_SPEAKER_PGA: 180 case WM9081_VMID_CONTROL: 181 case WM9081_BIAS_CONTROL_1: 182 case WM9081_ANALOGUE_MIXER: 183 case WM9081_ANTI_POP_CONTROL: 184 case WM9081_ANALOGUE_SPEAKER_1: 185 case WM9081_ANALOGUE_SPEAKER_2: 186 case WM9081_POWER_MANAGEMENT: 187 case WM9081_CLOCK_CONTROL_1: 188 case WM9081_CLOCK_CONTROL_2: 189 case WM9081_CLOCK_CONTROL_3: 190 case WM9081_FLL_CONTROL_1: 191 case WM9081_FLL_CONTROL_2: 192 case WM9081_FLL_CONTROL_3: 193 case WM9081_FLL_CONTROL_4: 194 case WM9081_FLL_CONTROL_5: 195 case WM9081_AUDIO_INTERFACE_1: 196 case WM9081_AUDIO_INTERFACE_2: 197 case WM9081_AUDIO_INTERFACE_3: 198 case WM9081_AUDIO_INTERFACE_4: 199 case WM9081_INTERRUPT_STATUS: 200 case WM9081_INTERRUPT_STATUS_MASK: 201 case WM9081_INTERRUPT_POLARITY: 202 case WM9081_INTERRUPT_CONTROL: 203 case WM9081_DAC_DIGITAL_1: 204 case WM9081_DAC_DIGITAL_2: 205 case WM9081_DRC_1: 206 case WM9081_DRC_2: 207 case WM9081_DRC_3: 208 case WM9081_DRC_4: 209 case WM9081_WRITE_SEQUENCER_1: 210 case WM9081_WRITE_SEQUENCER_2: 211 case WM9081_MW_SLAVE_1: 212 case WM9081_EQ_1: 213 case WM9081_EQ_2: 214 case WM9081_EQ_3: 215 case WM9081_EQ_4: 216 case WM9081_EQ_5: 217 case WM9081_EQ_6: 218 case WM9081_EQ_7: 219 case WM9081_EQ_8: 220 case WM9081_EQ_9: 221 case WM9081_EQ_10: 222 case WM9081_EQ_11: 223 case WM9081_EQ_12: 224 case WM9081_EQ_13: 225 case WM9081_EQ_14: 226 case WM9081_EQ_15: 227 case WM9081_EQ_16: 228 case WM9081_EQ_17: 229 case WM9081_EQ_18: 230 case WM9081_EQ_19: 231 case WM9081_EQ_20: 232 return true; 233 default: 234 return false; 235 } 236 } 237 238 static int wm9081_reset(struct regmap *map) 239 { 240 return regmap_write(map, WM9081_SOFTWARE_RESET, 0x9081); 241 } 242 243 static const DECLARE_TLV_DB_SCALE(drc_in_tlv, -4500, 75, 0); 244 static const DECLARE_TLV_DB_SCALE(drc_out_tlv, -2250, 75, 0); 245 static const DECLARE_TLV_DB_SCALE(drc_min_tlv, -1800, 600, 0); 246 static unsigned int drc_max_tlv[] = { 247 TLV_DB_RANGE_HEAD(4), 248 0, 0, TLV_DB_SCALE_ITEM(1200, 0, 0), 249 1, 1, TLV_DB_SCALE_ITEM(1800, 0, 0), 250 2, 2, TLV_DB_SCALE_ITEM(2400, 0, 0), 251 3, 3, TLV_DB_SCALE_ITEM(3600, 0, 0), 252 }; 253 static const DECLARE_TLV_DB_SCALE(drc_qr_tlv, 1200, 600, 0); 254 static const DECLARE_TLV_DB_SCALE(drc_startup_tlv, -300, 50, 0); 255 256 static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0); 257 258 static const DECLARE_TLV_DB_SCALE(in_tlv, -600, 600, 0); 259 static const DECLARE_TLV_DB_SCALE(dac_tlv, -7200, 75, 1); 260 static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0); 261 262 static const char *drc_high_text[] = { 263 "1", 264 "1/2", 265 "1/4", 266 "1/8", 267 "1/16", 268 "0", 269 }; 270 271 static SOC_ENUM_SINGLE_DECL(drc_high, WM9081_DRC_3, 3, drc_high_text); 272 273 static const char *drc_low_text[] = { 274 "1", 275 "1/2", 276 "1/4", 277 "1/8", 278 "0", 279 }; 280 281 static SOC_ENUM_SINGLE_DECL(drc_low, WM9081_DRC_3, 0, drc_low_text); 282 283 static const char *drc_atk_text[] = { 284 "181us", 285 "181us", 286 "363us", 287 "726us", 288 "1.45ms", 289 "2.9ms", 290 "5.8ms", 291 "11.6ms", 292 "23.2ms", 293 "46.4ms", 294 "92.8ms", 295 "185.6ms", 296 }; 297 298 static SOC_ENUM_SINGLE_DECL(drc_atk, WM9081_DRC_2, 12, drc_atk_text); 299 300 static const char *drc_dcy_text[] = { 301 "186ms", 302 "372ms", 303 "743ms", 304 "1.49s", 305 "2.97s", 306 "5.94s", 307 "11.89s", 308 "23.78s", 309 "47.56s", 310 }; 311 312 static SOC_ENUM_SINGLE_DECL(drc_dcy, WM9081_DRC_2, 8, drc_dcy_text); 313 314 static const char *drc_qr_dcy_text[] = { 315 "0.725ms", 316 "1.45ms", 317 "5.8ms", 318 }; 319 320 static SOC_ENUM_SINGLE_DECL(drc_qr_dcy, WM9081_DRC_2, 4, drc_qr_dcy_text); 321 322 static const char *dac_deemph_text[] = { 323 "None", 324 "32kHz", 325 "44.1kHz", 326 "48kHz", 327 }; 328 329 static SOC_ENUM_SINGLE_DECL(dac_deemph, WM9081_DAC_DIGITAL_2, 1, 330 dac_deemph_text); 331 332 static const char *speaker_mode_text[] = { 333 "Class D", 334 "Class AB", 335 }; 336 337 static SOC_ENUM_SINGLE_DECL(speaker_mode, WM9081_ANALOGUE_SPEAKER_2, 6, 338 speaker_mode_text); 339 340 static int speaker_mode_get(struct snd_kcontrol *kcontrol, 341 struct snd_ctl_elem_value *ucontrol) 342 { 343 struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol); 344 unsigned int reg; 345 346 reg = snd_soc_read(codec, WM9081_ANALOGUE_SPEAKER_2); 347 if (reg & WM9081_SPK_MODE) 348 ucontrol->value.integer.value[0] = 1; 349 else 350 ucontrol->value.integer.value[0] = 0; 351 352 return 0; 353 } 354 355 /* 356 * Stop any attempts to change speaker mode while the speaker is enabled. 357 * 358 * We also have some special anti-pop controls dependent on speaker 359 * mode which must be changed along with the mode. 360 */ 361 static int speaker_mode_put(struct snd_kcontrol *kcontrol, 362 struct snd_ctl_elem_value *ucontrol) 363 { 364 struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol); 365 unsigned int reg_pwr = snd_soc_read(codec, WM9081_POWER_MANAGEMENT); 366 unsigned int reg2 = snd_soc_read(codec, WM9081_ANALOGUE_SPEAKER_2); 367 368 /* Are we changing anything? */ 369 if (ucontrol->value.integer.value[0] == 370 ((reg2 & WM9081_SPK_MODE) != 0)) 371 return 0; 372 373 /* Don't try to change modes while enabled */ 374 if (reg_pwr & WM9081_SPK_ENA) 375 return -EINVAL; 376 377 if (ucontrol->value.integer.value[0]) { 378 /* Class AB */ 379 reg2 &= ~(WM9081_SPK_INV_MUTE | WM9081_OUT_SPK_CTRL); 380 reg2 |= WM9081_SPK_MODE; 381 } else { 382 /* Class D */ 383 reg2 |= WM9081_SPK_INV_MUTE | WM9081_OUT_SPK_CTRL; 384 reg2 &= ~WM9081_SPK_MODE; 385 } 386 387 snd_soc_write(codec, WM9081_ANALOGUE_SPEAKER_2, reg2); 388 389 return 0; 390 } 391 392 static const struct snd_kcontrol_new wm9081_snd_controls[] = { 393 SOC_SINGLE_TLV("IN1 Volume", WM9081_ANALOGUE_MIXER, 1, 1, 1, in_tlv), 394 SOC_SINGLE_TLV("IN2 Volume", WM9081_ANALOGUE_MIXER, 3, 1, 1, in_tlv), 395 396 SOC_SINGLE_TLV("Playback Volume", WM9081_DAC_DIGITAL_1, 1, 96, 0, dac_tlv), 397 398 SOC_SINGLE("LINEOUT Switch", WM9081_ANALOGUE_LINEOUT, 7, 1, 1), 399 SOC_SINGLE("LINEOUT ZC Switch", WM9081_ANALOGUE_LINEOUT, 6, 1, 0), 400 SOC_SINGLE_TLV("LINEOUT Volume", WM9081_ANALOGUE_LINEOUT, 0, 63, 0, out_tlv), 401 402 SOC_SINGLE("DRC Switch", WM9081_DRC_1, 15, 1, 0), 403 SOC_ENUM("DRC High Slope", drc_high), 404 SOC_ENUM("DRC Low Slope", drc_low), 405 SOC_SINGLE_TLV("DRC Input Volume", WM9081_DRC_4, 5, 60, 1, drc_in_tlv), 406 SOC_SINGLE_TLV("DRC Output Volume", WM9081_DRC_4, 0, 30, 1, drc_out_tlv), 407 SOC_SINGLE_TLV("DRC Minimum Volume", WM9081_DRC_2, 2, 3, 1, drc_min_tlv), 408 SOC_SINGLE_TLV("DRC Maximum Volume", WM9081_DRC_2, 0, 3, 0, drc_max_tlv), 409 SOC_ENUM("DRC Attack", drc_atk), 410 SOC_ENUM("DRC Decay", drc_dcy), 411 SOC_SINGLE("DRC Quick Release Switch", WM9081_DRC_1, 2, 1, 0), 412 SOC_SINGLE_TLV("DRC Quick Release Volume", WM9081_DRC_2, 6, 3, 0, drc_qr_tlv), 413 SOC_ENUM("DRC Quick Release Decay", drc_qr_dcy), 414 SOC_SINGLE_TLV("DRC Startup Volume", WM9081_DRC_1, 6, 18, 0, drc_startup_tlv), 415 416 SOC_SINGLE("EQ Switch", WM9081_EQ_1, 0, 1, 0), 417 418 SOC_SINGLE("Speaker DC Volume", WM9081_ANALOGUE_SPEAKER_1, 3, 5, 0), 419 SOC_SINGLE("Speaker AC Volume", WM9081_ANALOGUE_SPEAKER_1, 0, 5, 0), 420 SOC_SINGLE("Speaker Switch", WM9081_ANALOGUE_SPEAKER_PGA, 7, 1, 1), 421 SOC_SINGLE("Speaker ZC Switch", WM9081_ANALOGUE_SPEAKER_PGA, 6, 1, 0), 422 SOC_SINGLE_TLV("Speaker Volume", WM9081_ANALOGUE_SPEAKER_PGA, 0, 63, 0, 423 out_tlv), 424 SOC_ENUM("DAC Deemphasis", dac_deemph), 425 SOC_ENUM_EXT("Speaker Mode", speaker_mode, speaker_mode_get, speaker_mode_put), 426 }; 427 428 static const struct snd_kcontrol_new wm9081_eq_controls[] = { 429 SOC_SINGLE_TLV("EQ1 Volume", WM9081_EQ_1, 11, 24, 0, eq_tlv), 430 SOC_SINGLE_TLV("EQ2 Volume", WM9081_EQ_1, 6, 24, 0, eq_tlv), 431 SOC_SINGLE_TLV("EQ3 Volume", WM9081_EQ_1, 1, 24, 0, eq_tlv), 432 SOC_SINGLE_TLV("EQ4 Volume", WM9081_EQ_2, 11, 24, 0, eq_tlv), 433 SOC_SINGLE_TLV("EQ5 Volume", WM9081_EQ_2, 6, 24, 0, eq_tlv), 434 }; 435 436 static const struct snd_kcontrol_new mixer[] = { 437 SOC_DAPM_SINGLE("IN1 Switch", WM9081_ANALOGUE_MIXER, 0, 1, 0), 438 SOC_DAPM_SINGLE("IN2 Switch", WM9081_ANALOGUE_MIXER, 2, 1, 0), 439 SOC_DAPM_SINGLE("Playback Switch", WM9081_ANALOGUE_MIXER, 4, 1, 0), 440 }; 441 442 struct _fll_div { 443 u16 fll_fratio; 444 u16 fll_outdiv; 445 u16 fll_clk_ref_div; 446 u16 n; 447 u16 k; 448 }; 449 450 /* The size in bits of the FLL divide multiplied by 10 451 * to allow rounding later */ 452 #define FIXED_FLL_SIZE ((1 << 16) * 10) 453 454 static struct { 455 unsigned int min; 456 unsigned int max; 457 u16 fll_fratio; 458 int ratio; 459 } fll_fratios[] = { 460 { 0, 64000, 4, 16 }, 461 { 64000, 128000, 3, 8 }, 462 { 128000, 256000, 2, 4 }, 463 { 256000, 1000000, 1, 2 }, 464 { 1000000, 13500000, 0, 1 }, 465 }; 466 467 static int fll_factors(struct _fll_div *fll_div, unsigned int Fref, 468 unsigned int Fout) 469 { 470 u64 Kpart; 471 unsigned int K, Ndiv, Nmod, target; 472 unsigned int div; 473 int i; 474 475 /* Fref must be <=13.5MHz */ 476 div = 1; 477 while ((Fref / div) > 13500000) { 478 div *= 2; 479 480 if (div > 8) { 481 pr_err("Can't scale %dMHz input down to <=13.5MHz\n", 482 Fref); 483 return -EINVAL; 484 } 485 } 486 fll_div->fll_clk_ref_div = div / 2; 487 488 pr_debug("Fref=%u Fout=%u\n", Fref, Fout); 489 490 /* Apply the division for our remaining calculations */ 491 Fref /= div; 492 493 /* Fvco should be 90-100MHz; don't check the upper bound */ 494 div = 0; 495 target = Fout * 2; 496 while (target < 90000000) { 497 div++; 498 target *= 2; 499 if (div > 7) { 500 pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n", 501 Fout); 502 return -EINVAL; 503 } 504 } 505 fll_div->fll_outdiv = div; 506 507 pr_debug("Fvco=%dHz\n", target); 508 509 /* Find an appropriate FLL_FRATIO and factor it out of the target */ 510 for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) { 511 if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) { 512 fll_div->fll_fratio = fll_fratios[i].fll_fratio; 513 target /= fll_fratios[i].ratio; 514 break; 515 } 516 } 517 if (i == ARRAY_SIZE(fll_fratios)) { 518 pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref); 519 return -EINVAL; 520 } 521 522 /* Now, calculate N.K */ 523 Ndiv = target / Fref; 524 525 fll_div->n = Ndiv; 526 Nmod = target % Fref; 527 pr_debug("Nmod=%d\n", Nmod); 528 529 /* Calculate fractional part - scale up so we can round. */ 530 Kpart = FIXED_FLL_SIZE * (long long)Nmod; 531 532 do_div(Kpart, Fref); 533 534 K = Kpart & 0xFFFFFFFF; 535 536 if ((K % 10) >= 5) 537 K += 5; 538 539 /* Move down to proper range now rounding is done */ 540 fll_div->k = K / 10; 541 542 pr_debug("N=%x K=%x FLL_FRATIO=%x FLL_OUTDIV=%x FLL_CLK_REF_DIV=%x\n", 543 fll_div->n, fll_div->k, 544 fll_div->fll_fratio, fll_div->fll_outdiv, 545 fll_div->fll_clk_ref_div); 546 547 return 0; 548 } 549 550 static int wm9081_set_fll(struct snd_soc_codec *codec, int fll_id, 551 unsigned int Fref, unsigned int Fout) 552 { 553 struct wm9081_priv *wm9081 = snd_soc_codec_get_drvdata(codec); 554 u16 reg1, reg4, reg5; 555 struct _fll_div fll_div; 556 int ret; 557 int clk_sys_reg; 558 559 /* Any change? */ 560 if (Fref == wm9081->fll_fref && Fout == wm9081->fll_fout) 561 return 0; 562 563 /* Disable the FLL */ 564 if (Fout == 0) { 565 dev_dbg(codec->dev, "FLL disabled\n"); 566 wm9081->fll_fref = 0; 567 wm9081->fll_fout = 0; 568 569 return 0; 570 } 571 572 ret = fll_factors(&fll_div, Fref, Fout); 573 if (ret != 0) 574 return ret; 575 576 reg5 = snd_soc_read(codec, WM9081_FLL_CONTROL_5); 577 reg5 &= ~WM9081_FLL_CLK_SRC_MASK; 578 579 switch (fll_id) { 580 case WM9081_SYSCLK_FLL_MCLK: 581 reg5 |= 0x1; 582 break; 583 584 default: 585 dev_err(codec->dev, "Unknown FLL ID %d\n", fll_id); 586 return -EINVAL; 587 } 588 589 /* Disable CLK_SYS while we reconfigure */ 590 clk_sys_reg = snd_soc_read(codec, WM9081_CLOCK_CONTROL_3); 591 if (clk_sys_reg & WM9081_CLK_SYS_ENA) 592 snd_soc_write(codec, WM9081_CLOCK_CONTROL_3, 593 clk_sys_reg & ~WM9081_CLK_SYS_ENA); 594 595 /* Any FLL configuration change requires that the FLL be 596 * disabled first. */ 597 reg1 = snd_soc_read(codec, WM9081_FLL_CONTROL_1); 598 reg1 &= ~WM9081_FLL_ENA; 599 snd_soc_write(codec, WM9081_FLL_CONTROL_1, reg1); 600 601 /* Apply the configuration */ 602 if (fll_div.k) 603 reg1 |= WM9081_FLL_FRAC_MASK; 604 else 605 reg1 &= ~WM9081_FLL_FRAC_MASK; 606 snd_soc_write(codec, WM9081_FLL_CONTROL_1, reg1); 607 608 snd_soc_write(codec, WM9081_FLL_CONTROL_2, 609 (fll_div.fll_outdiv << WM9081_FLL_OUTDIV_SHIFT) | 610 (fll_div.fll_fratio << WM9081_FLL_FRATIO_SHIFT)); 611 snd_soc_write(codec, WM9081_FLL_CONTROL_3, fll_div.k); 612 613 reg4 = snd_soc_read(codec, WM9081_FLL_CONTROL_4); 614 reg4 &= ~WM9081_FLL_N_MASK; 615 reg4 |= fll_div.n << WM9081_FLL_N_SHIFT; 616 snd_soc_write(codec, WM9081_FLL_CONTROL_4, reg4); 617 618 reg5 &= ~WM9081_FLL_CLK_REF_DIV_MASK; 619 reg5 |= fll_div.fll_clk_ref_div << WM9081_FLL_CLK_REF_DIV_SHIFT; 620 snd_soc_write(codec, WM9081_FLL_CONTROL_5, reg5); 621 622 /* Set gain to the recommended value */ 623 snd_soc_update_bits(codec, WM9081_FLL_CONTROL_4, 624 WM9081_FLL_GAIN_MASK, 0); 625 626 /* Enable the FLL */ 627 snd_soc_write(codec, WM9081_FLL_CONTROL_1, reg1 | WM9081_FLL_ENA); 628 629 /* Then bring CLK_SYS up again if it was disabled */ 630 if (clk_sys_reg & WM9081_CLK_SYS_ENA) 631 snd_soc_write(codec, WM9081_CLOCK_CONTROL_3, clk_sys_reg); 632 633 dev_dbg(codec->dev, "FLL enabled at %dHz->%dHz\n", Fref, Fout); 634 635 wm9081->fll_fref = Fref; 636 wm9081->fll_fout = Fout; 637 638 return 0; 639 } 640 641 static int configure_clock(struct snd_soc_codec *codec) 642 { 643 struct wm9081_priv *wm9081 = snd_soc_codec_get_drvdata(codec); 644 int new_sysclk, i, target; 645 unsigned int reg; 646 int ret = 0; 647 int mclkdiv = 0; 648 int fll = 0; 649 650 switch (wm9081->sysclk_source) { 651 case WM9081_SYSCLK_MCLK: 652 if (wm9081->mclk_rate > 12225000) { 653 mclkdiv = 1; 654 wm9081->sysclk_rate = wm9081->mclk_rate / 2; 655 } else { 656 wm9081->sysclk_rate = wm9081->mclk_rate; 657 } 658 wm9081_set_fll(codec, WM9081_SYSCLK_FLL_MCLK, 0, 0); 659 break; 660 661 case WM9081_SYSCLK_FLL_MCLK: 662 /* If we have a sample rate calculate a CLK_SYS that 663 * gives us a suitable DAC configuration, plus BCLK. 664 * Ideally we would check to see if we can clock 665 * directly from MCLK and only use the FLL if this is 666 * not the case, though care must be taken with free 667 * running mode. 668 */ 669 if (wm9081->master && wm9081->bclk) { 670 /* Make sure we can generate CLK_SYS and BCLK 671 * and that we've got 3MHz for optimal 672 * performance. */ 673 for (i = 0; i < ARRAY_SIZE(clk_sys_rates); i++) { 674 target = wm9081->fs * clk_sys_rates[i].ratio; 675 new_sysclk = target; 676 if (target >= wm9081->bclk && 677 target > 3000000) 678 break; 679 } 680 681 if (i == ARRAY_SIZE(clk_sys_rates)) 682 return -EINVAL; 683 684 } else if (wm9081->fs) { 685 for (i = 0; i < ARRAY_SIZE(clk_sys_rates); i++) { 686 new_sysclk = clk_sys_rates[i].ratio 687 * wm9081->fs; 688 if (new_sysclk > 3000000) 689 break; 690 } 691 692 if (i == ARRAY_SIZE(clk_sys_rates)) 693 return -EINVAL; 694 695 } else { 696 new_sysclk = 12288000; 697 } 698 699 ret = wm9081_set_fll(codec, WM9081_SYSCLK_FLL_MCLK, 700 wm9081->mclk_rate, new_sysclk); 701 if (ret == 0) { 702 wm9081->sysclk_rate = new_sysclk; 703 704 /* Switch SYSCLK over to FLL */ 705 fll = 1; 706 } else { 707 wm9081->sysclk_rate = wm9081->mclk_rate; 708 } 709 break; 710 711 default: 712 return -EINVAL; 713 } 714 715 reg = snd_soc_read(codec, WM9081_CLOCK_CONTROL_1); 716 if (mclkdiv) 717 reg |= WM9081_MCLKDIV2; 718 else 719 reg &= ~WM9081_MCLKDIV2; 720 snd_soc_write(codec, WM9081_CLOCK_CONTROL_1, reg); 721 722 reg = snd_soc_read(codec, WM9081_CLOCK_CONTROL_3); 723 if (fll) 724 reg |= WM9081_CLK_SRC_SEL; 725 else 726 reg &= ~WM9081_CLK_SRC_SEL; 727 snd_soc_write(codec, WM9081_CLOCK_CONTROL_3, reg); 728 729 dev_dbg(codec->dev, "CLK_SYS is %dHz\n", wm9081->sysclk_rate); 730 731 return ret; 732 } 733 734 static int clk_sys_event(struct snd_soc_dapm_widget *w, 735 struct snd_kcontrol *kcontrol, int event) 736 { 737 struct snd_soc_codec *codec = w->codec; 738 struct wm9081_priv *wm9081 = snd_soc_codec_get_drvdata(codec); 739 740 /* This should be done on init() for bypass paths */ 741 switch (wm9081->sysclk_source) { 742 case WM9081_SYSCLK_MCLK: 743 dev_dbg(codec->dev, "Using %dHz MCLK\n", wm9081->mclk_rate); 744 break; 745 case WM9081_SYSCLK_FLL_MCLK: 746 dev_dbg(codec->dev, "Using %dHz MCLK with FLL\n", 747 wm9081->mclk_rate); 748 break; 749 default: 750 dev_err(codec->dev, "System clock not configured\n"); 751 return -EINVAL; 752 } 753 754 switch (event) { 755 case SND_SOC_DAPM_PRE_PMU: 756 configure_clock(codec); 757 break; 758 759 case SND_SOC_DAPM_POST_PMD: 760 /* Disable the FLL if it's running */ 761 wm9081_set_fll(codec, 0, 0, 0); 762 break; 763 } 764 765 return 0; 766 } 767 768 static const struct snd_soc_dapm_widget wm9081_dapm_widgets[] = { 769 SND_SOC_DAPM_INPUT("IN1"), 770 SND_SOC_DAPM_INPUT("IN2"), 771 772 SND_SOC_DAPM_DAC("DAC", NULL, WM9081_POWER_MANAGEMENT, 0, 0), 773 774 SND_SOC_DAPM_MIXER_NAMED_CTL("Mixer", SND_SOC_NOPM, 0, 0, 775 mixer, ARRAY_SIZE(mixer)), 776 777 SND_SOC_DAPM_PGA("LINEOUT PGA", WM9081_POWER_MANAGEMENT, 4, 0, NULL, 0), 778 779 SND_SOC_DAPM_PGA("Speaker PGA", WM9081_POWER_MANAGEMENT, 2, 0, NULL, 0), 780 SND_SOC_DAPM_OUT_DRV("Speaker", WM9081_POWER_MANAGEMENT, 1, 0, NULL, 0), 781 782 SND_SOC_DAPM_OUTPUT("LINEOUT"), 783 SND_SOC_DAPM_OUTPUT("SPKN"), 784 SND_SOC_DAPM_OUTPUT("SPKP"), 785 786 SND_SOC_DAPM_SUPPLY("CLK_SYS", WM9081_CLOCK_CONTROL_3, 0, 0, clk_sys_event, 787 SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), 788 SND_SOC_DAPM_SUPPLY("CLK_DSP", WM9081_CLOCK_CONTROL_3, 1, 0, NULL, 0), 789 SND_SOC_DAPM_SUPPLY("TOCLK", WM9081_CLOCK_CONTROL_3, 2, 0, NULL, 0), 790 SND_SOC_DAPM_SUPPLY("TSENSE", WM9081_POWER_MANAGEMENT, 7, 0, NULL, 0), 791 }; 792 793 794 static const struct snd_soc_dapm_route wm9081_audio_paths[] = { 795 { "DAC", NULL, "CLK_SYS" }, 796 { "DAC", NULL, "CLK_DSP" }, 797 { "DAC", NULL, "AIF" }, 798 799 { "Mixer", "IN1 Switch", "IN1" }, 800 { "Mixer", "IN2 Switch", "IN2" }, 801 { "Mixer", "Playback Switch", "DAC" }, 802 803 { "LINEOUT PGA", NULL, "Mixer" }, 804 { "LINEOUT PGA", NULL, "TOCLK" }, 805 { "LINEOUT PGA", NULL, "CLK_SYS" }, 806 807 { "LINEOUT", NULL, "LINEOUT PGA" }, 808 809 { "Speaker PGA", NULL, "Mixer" }, 810 { "Speaker PGA", NULL, "TOCLK" }, 811 { "Speaker PGA", NULL, "CLK_SYS" }, 812 813 { "Speaker", NULL, "Speaker PGA" }, 814 { "Speaker", NULL, "TSENSE" }, 815 816 { "SPKN", NULL, "Speaker" }, 817 { "SPKP", NULL, "Speaker" }, 818 }; 819 820 static int wm9081_set_bias_level(struct snd_soc_codec *codec, 821 enum snd_soc_bias_level level) 822 { 823 struct wm9081_priv *wm9081 = snd_soc_codec_get_drvdata(codec); 824 825 switch (level) { 826 case SND_SOC_BIAS_ON: 827 break; 828 829 case SND_SOC_BIAS_PREPARE: 830 /* VMID=2*40k */ 831 snd_soc_update_bits(codec, WM9081_VMID_CONTROL, 832 WM9081_VMID_SEL_MASK, 0x2); 833 834 /* Normal bias current */ 835 snd_soc_update_bits(codec, WM9081_BIAS_CONTROL_1, 836 WM9081_STBY_BIAS_ENA, 0); 837 break; 838 839 case SND_SOC_BIAS_STANDBY: 840 /* Initial cold start */ 841 if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) { 842 regcache_cache_only(wm9081->regmap, false); 843 regcache_sync(wm9081->regmap); 844 845 /* Disable LINEOUT discharge */ 846 snd_soc_update_bits(codec, WM9081_ANTI_POP_CONTROL, 847 WM9081_LINEOUT_DISCH, 0); 848 849 /* Select startup bias source */ 850 snd_soc_update_bits(codec, WM9081_BIAS_CONTROL_1, 851 WM9081_BIAS_SRC | WM9081_BIAS_ENA, 852 WM9081_BIAS_SRC | WM9081_BIAS_ENA); 853 854 /* VMID 2*4k; Soft VMID ramp enable */ 855 snd_soc_update_bits(codec, WM9081_VMID_CONTROL, 856 WM9081_VMID_RAMP | 857 WM9081_VMID_SEL_MASK, 858 WM9081_VMID_RAMP | 0x6); 859 860 mdelay(100); 861 862 /* Normal bias enable & soft start off */ 863 snd_soc_update_bits(codec, WM9081_VMID_CONTROL, 864 WM9081_VMID_RAMP, 0); 865 866 /* Standard bias source */ 867 snd_soc_update_bits(codec, WM9081_BIAS_CONTROL_1, 868 WM9081_BIAS_SRC, 0); 869 } 870 871 /* VMID 2*240k */ 872 snd_soc_update_bits(codec, WM9081_VMID_CONTROL, 873 WM9081_VMID_SEL_MASK, 0x04); 874 875 /* Standby bias current on */ 876 snd_soc_update_bits(codec, WM9081_BIAS_CONTROL_1, 877 WM9081_STBY_BIAS_ENA, 878 WM9081_STBY_BIAS_ENA); 879 break; 880 881 case SND_SOC_BIAS_OFF: 882 /* Startup bias source and disable bias */ 883 snd_soc_update_bits(codec, WM9081_BIAS_CONTROL_1, 884 WM9081_BIAS_SRC | WM9081_BIAS_ENA, 885 WM9081_BIAS_SRC); 886 887 /* Disable VMID with soft ramping */ 888 snd_soc_update_bits(codec, WM9081_VMID_CONTROL, 889 WM9081_VMID_RAMP | WM9081_VMID_SEL_MASK, 890 WM9081_VMID_RAMP); 891 892 /* Actively discharge LINEOUT */ 893 snd_soc_update_bits(codec, WM9081_ANTI_POP_CONTROL, 894 WM9081_LINEOUT_DISCH, 895 WM9081_LINEOUT_DISCH); 896 897 regcache_cache_only(wm9081->regmap, true); 898 break; 899 } 900 901 codec->dapm.bias_level = level; 902 903 return 0; 904 } 905 906 static int wm9081_set_dai_fmt(struct snd_soc_dai *dai, 907 unsigned int fmt) 908 { 909 struct snd_soc_codec *codec = dai->codec; 910 struct wm9081_priv *wm9081 = snd_soc_codec_get_drvdata(codec); 911 unsigned int aif2 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_2); 912 913 aif2 &= ~(WM9081_AIF_BCLK_INV | WM9081_AIF_LRCLK_INV | 914 WM9081_BCLK_DIR | WM9081_LRCLK_DIR | WM9081_AIF_FMT_MASK); 915 916 switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { 917 case SND_SOC_DAIFMT_CBS_CFS: 918 wm9081->master = 0; 919 break; 920 case SND_SOC_DAIFMT_CBS_CFM: 921 aif2 |= WM9081_LRCLK_DIR; 922 wm9081->master = 1; 923 break; 924 case SND_SOC_DAIFMT_CBM_CFS: 925 aif2 |= WM9081_BCLK_DIR; 926 wm9081->master = 1; 927 break; 928 case SND_SOC_DAIFMT_CBM_CFM: 929 aif2 |= WM9081_LRCLK_DIR | WM9081_BCLK_DIR; 930 wm9081->master = 1; 931 break; 932 default: 933 return -EINVAL; 934 } 935 936 switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { 937 case SND_SOC_DAIFMT_DSP_B: 938 aif2 |= WM9081_AIF_LRCLK_INV; 939 case SND_SOC_DAIFMT_DSP_A: 940 aif2 |= 0x3; 941 break; 942 case SND_SOC_DAIFMT_I2S: 943 aif2 |= 0x2; 944 break; 945 case SND_SOC_DAIFMT_RIGHT_J: 946 break; 947 case SND_SOC_DAIFMT_LEFT_J: 948 aif2 |= 0x1; 949 break; 950 default: 951 return -EINVAL; 952 } 953 954 switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { 955 case SND_SOC_DAIFMT_DSP_A: 956 case SND_SOC_DAIFMT_DSP_B: 957 /* frame inversion not valid for DSP modes */ 958 switch (fmt & SND_SOC_DAIFMT_INV_MASK) { 959 case SND_SOC_DAIFMT_NB_NF: 960 break; 961 case SND_SOC_DAIFMT_IB_NF: 962 aif2 |= WM9081_AIF_BCLK_INV; 963 break; 964 default: 965 return -EINVAL; 966 } 967 break; 968 969 case SND_SOC_DAIFMT_I2S: 970 case SND_SOC_DAIFMT_RIGHT_J: 971 case SND_SOC_DAIFMT_LEFT_J: 972 switch (fmt & SND_SOC_DAIFMT_INV_MASK) { 973 case SND_SOC_DAIFMT_NB_NF: 974 break; 975 case SND_SOC_DAIFMT_IB_IF: 976 aif2 |= WM9081_AIF_BCLK_INV | WM9081_AIF_LRCLK_INV; 977 break; 978 case SND_SOC_DAIFMT_IB_NF: 979 aif2 |= WM9081_AIF_BCLK_INV; 980 break; 981 case SND_SOC_DAIFMT_NB_IF: 982 aif2 |= WM9081_AIF_LRCLK_INV; 983 break; 984 default: 985 return -EINVAL; 986 } 987 break; 988 default: 989 return -EINVAL; 990 } 991 992 snd_soc_write(codec, WM9081_AUDIO_INTERFACE_2, aif2); 993 994 return 0; 995 } 996 997 static int wm9081_hw_params(struct snd_pcm_substream *substream, 998 struct snd_pcm_hw_params *params, 999 struct snd_soc_dai *dai) 1000 { 1001 struct snd_soc_codec *codec = dai->codec; 1002 struct wm9081_priv *wm9081 = snd_soc_codec_get_drvdata(codec); 1003 int ret, i, best, best_val, cur_val; 1004 unsigned int clk_ctrl2, aif1, aif2, aif3, aif4; 1005 1006 clk_ctrl2 = snd_soc_read(codec, WM9081_CLOCK_CONTROL_2); 1007 clk_ctrl2 &= ~(WM9081_CLK_SYS_RATE_MASK | WM9081_SAMPLE_RATE_MASK); 1008 1009 aif1 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_1); 1010 1011 aif2 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_2); 1012 aif2 &= ~WM9081_AIF_WL_MASK; 1013 1014 aif3 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_3); 1015 aif3 &= ~WM9081_BCLK_DIV_MASK; 1016 1017 aif4 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_4); 1018 aif4 &= ~WM9081_LRCLK_RATE_MASK; 1019 1020 wm9081->fs = params_rate(params); 1021 1022 if (wm9081->tdm_width) { 1023 /* If TDM is set up then that fixes our BCLK. */ 1024 int slots = ((aif1 & WM9081_AIFDAC_TDM_MODE_MASK) >> 1025 WM9081_AIFDAC_TDM_MODE_SHIFT) + 1; 1026 1027 wm9081->bclk = wm9081->fs * wm9081->tdm_width * slots; 1028 } else { 1029 /* Otherwise work out a BCLK from the sample size */ 1030 wm9081->bclk = 2 * wm9081->fs; 1031 1032 switch (params_width(params)) { 1033 case 16: 1034 wm9081->bclk *= 16; 1035 break; 1036 case 20: 1037 wm9081->bclk *= 20; 1038 aif2 |= 0x4; 1039 break; 1040 case 24: 1041 wm9081->bclk *= 24; 1042 aif2 |= 0x8; 1043 break; 1044 case 32: 1045 wm9081->bclk *= 32; 1046 aif2 |= 0xc; 1047 break; 1048 default: 1049 return -EINVAL; 1050 } 1051 } 1052 1053 dev_dbg(codec->dev, "Target BCLK is %dHz\n", wm9081->bclk); 1054 1055 ret = configure_clock(codec); 1056 if (ret != 0) 1057 return ret; 1058 1059 /* Select nearest CLK_SYS_RATE */ 1060 best = 0; 1061 best_val = abs((wm9081->sysclk_rate / clk_sys_rates[0].ratio) 1062 - wm9081->fs); 1063 for (i = 1; i < ARRAY_SIZE(clk_sys_rates); i++) { 1064 cur_val = abs((wm9081->sysclk_rate / 1065 clk_sys_rates[i].ratio) - wm9081->fs); 1066 if (cur_val < best_val) { 1067 best = i; 1068 best_val = cur_val; 1069 } 1070 } 1071 dev_dbg(codec->dev, "Selected CLK_SYS_RATIO of %d\n", 1072 clk_sys_rates[best].ratio); 1073 clk_ctrl2 |= (clk_sys_rates[best].clk_sys_rate 1074 << WM9081_CLK_SYS_RATE_SHIFT); 1075 1076 /* SAMPLE_RATE */ 1077 best = 0; 1078 best_val = abs(wm9081->fs - sample_rates[0].rate); 1079 for (i = 1; i < ARRAY_SIZE(sample_rates); i++) { 1080 /* Closest match */ 1081 cur_val = abs(wm9081->fs - sample_rates[i].rate); 1082 if (cur_val < best_val) { 1083 best = i; 1084 best_val = cur_val; 1085 } 1086 } 1087 dev_dbg(codec->dev, "Selected SAMPLE_RATE of %dHz\n", 1088 sample_rates[best].rate); 1089 clk_ctrl2 |= (sample_rates[best].sample_rate 1090 << WM9081_SAMPLE_RATE_SHIFT); 1091 1092 /* BCLK_DIV */ 1093 best = 0; 1094 best_val = INT_MAX; 1095 for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) { 1096 cur_val = ((wm9081->sysclk_rate * 10) / bclk_divs[i].div) 1097 - wm9081->bclk; 1098 if (cur_val < 0) /* Table is sorted */ 1099 break; 1100 if (cur_val < best_val) { 1101 best = i; 1102 best_val = cur_val; 1103 } 1104 } 1105 wm9081->bclk = (wm9081->sysclk_rate * 10) / bclk_divs[best].div; 1106 dev_dbg(codec->dev, "Selected BCLK_DIV of %d for %dHz BCLK\n", 1107 bclk_divs[best].div, wm9081->bclk); 1108 aif3 |= bclk_divs[best].bclk_div; 1109 1110 /* LRCLK is a simple fraction of BCLK */ 1111 dev_dbg(codec->dev, "LRCLK_RATE is %d\n", wm9081->bclk / wm9081->fs); 1112 aif4 |= wm9081->bclk / wm9081->fs; 1113 1114 /* Apply a ReTune Mobile configuration if it's in use */ 1115 if (wm9081->pdata.num_retune_configs) { 1116 struct wm9081_pdata *pdata = &wm9081->pdata; 1117 struct wm9081_retune_mobile_setting *s; 1118 int eq1; 1119 1120 best = 0; 1121 best_val = abs(pdata->retune_configs[0].rate - wm9081->fs); 1122 for (i = 0; i < pdata->num_retune_configs; i++) { 1123 cur_val = abs(pdata->retune_configs[i].rate - 1124 wm9081->fs); 1125 if (cur_val < best_val) { 1126 best_val = cur_val; 1127 best = i; 1128 } 1129 } 1130 s = &pdata->retune_configs[best]; 1131 1132 dev_dbg(codec->dev, "ReTune Mobile %s tuned for %dHz\n", 1133 s->name, s->rate); 1134 1135 /* If the EQ is enabled then disable it while we write out */ 1136 eq1 = snd_soc_read(codec, WM9081_EQ_1) & WM9081_EQ_ENA; 1137 if (eq1 & WM9081_EQ_ENA) 1138 snd_soc_write(codec, WM9081_EQ_1, 0); 1139 1140 /* Write out the other values */ 1141 for (i = 1; i < ARRAY_SIZE(s->config); i++) 1142 snd_soc_write(codec, WM9081_EQ_1 + i, s->config[i]); 1143 1144 eq1 |= (s->config[0] & ~WM9081_EQ_ENA); 1145 snd_soc_write(codec, WM9081_EQ_1, eq1); 1146 } 1147 1148 snd_soc_write(codec, WM9081_CLOCK_CONTROL_2, clk_ctrl2); 1149 snd_soc_write(codec, WM9081_AUDIO_INTERFACE_2, aif2); 1150 snd_soc_write(codec, WM9081_AUDIO_INTERFACE_3, aif3); 1151 snd_soc_write(codec, WM9081_AUDIO_INTERFACE_4, aif4); 1152 1153 return 0; 1154 } 1155 1156 static int wm9081_digital_mute(struct snd_soc_dai *codec_dai, int mute) 1157 { 1158 struct snd_soc_codec *codec = codec_dai->codec; 1159 unsigned int reg; 1160 1161 reg = snd_soc_read(codec, WM9081_DAC_DIGITAL_2); 1162 1163 if (mute) 1164 reg |= WM9081_DAC_MUTE; 1165 else 1166 reg &= ~WM9081_DAC_MUTE; 1167 1168 snd_soc_write(codec, WM9081_DAC_DIGITAL_2, reg); 1169 1170 return 0; 1171 } 1172 1173 static int wm9081_set_sysclk(struct snd_soc_codec *codec, int clk_id, 1174 int source, unsigned int freq, int dir) 1175 { 1176 struct wm9081_priv *wm9081 = snd_soc_codec_get_drvdata(codec); 1177 1178 switch (clk_id) { 1179 case WM9081_SYSCLK_MCLK: 1180 case WM9081_SYSCLK_FLL_MCLK: 1181 wm9081->sysclk_source = clk_id; 1182 wm9081->mclk_rate = freq; 1183 break; 1184 1185 default: 1186 return -EINVAL; 1187 } 1188 1189 return 0; 1190 } 1191 1192 static int wm9081_set_tdm_slot(struct snd_soc_dai *dai, 1193 unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width) 1194 { 1195 struct snd_soc_codec *codec = dai->codec; 1196 struct wm9081_priv *wm9081 = snd_soc_codec_get_drvdata(codec); 1197 unsigned int aif1 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_1); 1198 1199 aif1 &= ~(WM9081_AIFDAC_TDM_SLOT_MASK | WM9081_AIFDAC_TDM_MODE_MASK); 1200 1201 if (slots < 0 || slots > 4) 1202 return -EINVAL; 1203 1204 wm9081->tdm_width = slot_width; 1205 1206 if (slots == 0) 1207 slots = 1; 1208 1209 aif1 |= (slots - 1) << WM9081_AIFDAC_TDM_MODE_SHIFT; 1210 1211 switch (rx_mask) { 1212 case 1: 1213 break; 1214 case 2: 1215 aif1 |= 0x10; 1216 break; 1217 case 4: 1218 aif1 |= 0x20; 1219 break; 1220 case 8: 1221 aif1 |= 0x30; 1222 break; 1223 default: 1224 return -EINVAL; 1225 } 1226 1227 snd_soc_write(codec, WM9081_AUDIO_INTERFACE_1, aif1); 1228 1229 return 0; 1230 } 1231 1232 #define WM9081_RATES SNDRV_PCM_RATE_8000_96000 1233 1234 #define WM9081_FORMATS \ 1235 (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ 1236 SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) 1237 1238 static const struct snd_soc_dai_ops wm9081_dai_ops = { 1239 .hw_params = wm9081_hw_params, 1240 .set_fmt = wm9081_set_dai_fmt, 1241 .digital_mute = wm9081_digital_mute, 1242 .set_tdm_slot = wm9081_set_tdm_slot, 1243 }; 1244 1245 /* We report two channels because the CODEC processes a stereo signal, even 1246 * though it is only capable of handling a mono output. 1247 */ 1248 static struct snd_soc_dai_driver wm9081_dai = { 1249 .name = "wm9081-hifi", 1250 .playback = { 1251 .stream_name = "AIF", 1252 .channels_min = 1, 1253 .channels_max = 2, 1254 .rates = WM9081_RATES, 1255 .formats = WM9081_FORMATS, 1256 }, 1257 .ops = &wm9081_dai_ops, 1258 }; 1259 1260 static int wm9081_probe(struct snd_soc_codec *codec) 1261 { 1262 struct wm9081_priv *wm9081 = snd_soc_codec_get_drvdata(codec); 1263 1264 /* Enable zero cross by default */ 1265 snd_soc_update_bits(codec, WM9081_ANALOGUE_LINEOUT, 1266 WM9081_LINEOUTZC, WM9081_LINEOUTZC); 1267 snd_soc_update_bits(codec, WM9081_ANALOGUE_SPEAKER_PGA, 1268 WM9081_SPKPGAZC, WM9081_SPKPGAZC); 1269 1270 if (!wm9081->pdata.num_retune_configs) { 1271 dev_dbg(codec->dev, 1272 "No ReTune Mobile data, using normal EQ\n"); 1273 snd_soc_add_codec_controls(codec, wm9081_eq_controls, 1274 ARRAY_SIZE(wm9081_eq_controls)); 1275 } 1276 1277 return 0; 1278 } 1279 1280 static struct snd_soc_codec_driver soc_codec_dev_wm9081 = { 1281 .probe = wm9081_probe, 1282 1283 .set_sysclk = wm9081_set_sysclk, 1284 .set_bias_level = wm9081_set_bias_level, 1285 1286 .idle_bias_off = true, 1287 1288 .controls = wm9081_snd_controls, 1289 .num_controls = ARRAY_SIZE(wm9081_snd_controls), 1290 .dapm_widgets = wm9081_dapm_widgets, 1291 .num_dapm_widgets = ARRAY_SIZE(wm9081_dapm_widgets), 1292 .dapm_routes = wm9081_audio_paths, 1293 .num_dapm_routes = ARRAY_SIZE(wm9081_audio_paths), 1294 }; 1295 1296 static const struct regmap_config wm9081_regmap = { 1297 .reg_bits = 8, 1298 .val_bits = 16, 1299 1300 .max_register = WM9081_MAX_REGISTER, 1301 .reg_defaults = wm9081_reg, 1302 .num_reg_defaults = ARRAY_SIZE(wm9081_reg), 1303 .volatile_reg = wm9081_volatile_register, 1304 .readable_reg = wm9081_readable_register, 1305 .cache_type = REGCACHE_RBTREE, 1306 }; 1307 1308 #if IS_ENABLED(CONFIG_I2C) 1309 static int wm9081_i2c_probe(struct i2c_client *i2c, 1310 const struct i2c_device_id *id) 1311 { 1312 struct wm9081_priv *wm9081; 1313 unsigned int reg; 1314 int ret; 1315 1316 wm9081 = devm_kzalloc(&i2c->dev, sizeof(struct wm9081_priv), 1317 GFP_KERNEL); 1318 if (wm9081 == NULL) 1319 return -ENOMEM; 1320 1321 i2c_set_clientdata(i2c, wm9081); 1322 1323 wm9081->regmap = devm_regmap_init_i2c(i2c, &wm9081_regmap); 1324 if (IS_ERR(wm9081->regmap)) { 1325 ret = PTR_ERR(wm9081->regmap); 1326 dev_err(&i2c->dev, "regmap_init() failed: %d\n", ret); 1327 return ret; 1328 } 1329 1330 ret = regmap_read(wm9081->regmap, WM9081_SOFTWARE_RESET, ®); 1331 if (ret != 0) { 1332 dev_err(&i2c->dev, "Failed to read chip ID: %d\n", ret); 1333 return ret; 1334 } 1335 if (reg != 0x9081) { 1336 dev_err(&i2c->dev, "Device is not a WM9081: ID=0x%x\n", reg); 1337 return -EINVAL; 1338 } 1339 1340 ret = wm9081_reset(wm9081->regmap); 1341 if (ret < 0) { 1342 dev_err(&i2c->dev, "Failed to issue reset\n"); 1343 return ret; 1344 } 1345 1346 if (dev_get_platdata(&i2c->dev)) 1347 memcpy(&wm9081->pdata, dev_get_platdata(&i2c->dev), 1348 sizeof(wm9081->pdata)); 1349 1350 reg = 0; 1351 if (wm9081->pdata.irq_high) 1352 reg |= WM9081_IRQ_POL; 1353 if (!wm9081->pdata.irq_cmos) 1354 reg |= WM9081_IRQ_OP_CTRL; 1355 regmap_update_bits(wm9081->regmap, WM9081_INTERRUPT_CONTROL, 1356 WM9081_IRQ_POL | WM9081_IRQ_OP_CTRL, reg); 1357 1358 regcache_cache_only(wm9081->regmap, true); 1359 1360 ret = snd_soc_register_codec(&i2c->dev, 1361 &soc_codec_dev_wm9081, &wm9081_dai, 1); 1362 if (ret < 0) 1363 return ret; 1364 1365 return 0; 1366 } 1367 1368 static int wm9081_i2c_remove(struct i2c_client *client) 1369 { 1370 snd_soc_unregister_codec(&client->dev); 1371 return 0; 1372 } 1373 1374 static const struct i2c_device_id wm9081_i2c_id[] = { 1375 { "wm9081", 0 }, 1376 { } 1377 }; 1378 MODULE_DEVICE_TABLE(i2c, wm9081_i2c_id); 1379 1380 static struct i2c_driver wm9081_i2c_driver = { 1381 .driver = { 1382 .name = "wm9081", 1383 .owner = THIS_MODULE, 1384 }, 1385 .probe = wm9081_i2c_probe, 1386 .remove = wm9081_i2c_remove, 1387 .id_table = wm9081_i2c_id, 1388 }; 1389 #endif 1390 1391 module_i2c_driver(wm9081_i2c_driver); 1392 1393 MODULE_DESCRIPTION("ASoC WM9081 driver"); 1394 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); 1395 MODULE_LICENSE("GPL"); 1396