1 /* 2 * wm8955.c -- WM8955 ALSA SoC Audio driver 3 * 4 * Copyright 2009 Wolfson Microelectronics plc 5 * 6 * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License version 2 as 10 * published by the Free Software Foundation. 11 */ 12 13 #include <linux/module.h> 14 #include <linux/moduleparam.h> 15 #include <linux/init.h> 16 #include <linux/delay.h> 17 #include <linux/pm.h> 18 #include <linux/i2c.h> 19 #include <linux/regmap.h> 20 #include <linux/regulator/consumer.h> 21 #include <linux/slab.h> 22 #include <sound/core.h> 23 #include <sound/pcm.h> 24 #include <sound/pcm_params.h> 25 #include <sound/soc.h> 26 #include <sound/initval.h> 27 #include <sound/tlv.h> 28 #include <sound/wm8955.h> 29 30 #include "wm8955.h" 31 32 #define WM8955_NUM_SUPPLIES 4 33 static const char *wm8955_supply_names[WM8955_NUM_SUPPLIES] = { 34 "DCVDD", 35 "DBVDD", 36 "HPVDD", 37 "AVDD", 38 }; 39 40 /* codec private data */ 41 struct wm8955_priv { 42 struct regmap *regmap; 43 44 unsigned int mclk_rate; 45 46 int deemph; 47 int fs; 48 49 struct regulator_bulk_data supplies[WM8955_NUM_SUPPLIES]; 50 }; 51 52 static const struct reg_default wm8955_reg_defaults[] = { 53 { 2, 0x0079 }, /* R2 - LOUT1 volume */ 54 { 3, 0x0079 }, /* R3 - ROUT1 volume */ 55 { 5, 0x0008 }, /* R5 - DAC Control */ 56 { 7, 0x000A }, /* R7 - Audio Interface */ 57 { 8, 0x0000 }, /* R8 - Sample Rate */ 58 { 10, 0x00FF }, /* R10 - Left DAC volume */ 59 { 11, 0x00FF }, /* R11 - Right DAC volume */ 60 { 12, 0x000F }, /* R12 - Bass control */ 61 { 13, 0x000F }, /* R13 - Treble control */ 62 { 23, 0x00C1 }, /* R23 - Additional control (1) */ 63 { 24, 0x0000 }, /* R24 - Additional control (2) */ 64 { 25, 0x0000 }, /* R25 - Power Management (1) */ 65 { 26, 0x0000 }, /* R26 - Power Management (2) */ 66 { 27, 0x0000 }, /* R27 - Additional Control (3) */ 67 { 34, 0x0050 }, /* R34 - Left out Mix (1) */ 68 { 35, 0x0050 }, /* R35 - Left out Mix (2) */ 69 { 36, 0x0050 }, /* R36 - Right out Mix (1) */ 70 { 37, 0x0050 }, /* R37 - Right Out Mix (2) */ 71 { 38, 0x0050 }, /* R38 - Mono out Mix (1) */ 72 { 39, 0x0050 }, /* R39 - Mono out Mix (2) */ 73 { 40, 0x0079 }, /* R40 - LOUT2 volume */ 74 { 41, 0x0079 }, /* R41 - ROUT2 volume */ 75 { 42, 0x0079 }, /* R42 - MONOOUT volume */ 76 { 43, 0x0000 }, /* R43 - Clocking / PLL */ 77 { 44, 0x0103 }, /* R44 - PLL Control 1 */ 78 { 45, 0x0024 }, /* R45 - PLL Control 2 */ 79 { 46, 0x01BA }, /* R46 - PLL Control 3 */ 80 { 59, 0x0000 }, /* R59 - PLL Control 4 */ 81 }; 82 83 static bool wm8955_writeable(struct device *dev, unsigned int reg) 84 { 85 switch (reg) { 86 case WM8955_LOUT1_VOLUME: 87 case WM8955_ROUT1_VOLUME: 88 case WM8955_DAC_CONTROL: 89 case WM8955_AUDIO_INTERFACE: 90 case WM8955_SAMPLE_RATE: 91 case WM8955_LEFT_DAC_VOLUME: 92 case WM8955_RIGHT_DAC_VOLUME: 93 case WM8955_BASS_CONTROL: 94 case WM8955_TREBLE_CONTROL: 95 case WM8955_RESET: 96 case WM8955_ADDITIONAL_CONTROL_1: 97 case WM8955_ADDITIONAL_CONTROL_2: 98 case WM8955_POWER_MANAGEMENT_1: 99 case WM8955_POWER_MANAGEMENT_2: 100 case WM8955_ADDITIONAL_CONTROL_3: 101 case WM8955_LEFT_OUT_MIX_1: 102 case WM8955_LEFT_OUT_MIX_2: 103 case WM8955_RIGHT_OUT_MIX_1: 104 case WM8955_RIGHT_OUT_MIX_2: 105 case WM8955_MONO_OUT_MIX_1: 106 case WM8955_MONO_OUT_MIX_2: 107 case WM8955_LOUT2_VOLUME: 108 case WM8955_ROUT2_VOLUME: 109 case WM8955_MONOOUT_VOLUME: 110 case WM8955_CLOCKING_PLL: 111 case WM8955_PLL_CONTROL_1: 112 case WM8955_PLL_CONTROL_2: 113 case WM8955_PLL_CONTROL_3: 114 case WM8955_PLL_CONTROL_4: 115 return true; 116 default: 117 return false; 118 } 119 } 120 121 static bool wm8955_volatile(struct device *dev, unsigned int reg) 122 { 123 switch (reg) { 124 case WM8955_RESET: 125 return true; 126 default: 127 return false; 128 } 129 } 130 131 static int wm8955_reset(struct snd_soc_codec *codec) 132 { 133 return snd_soc_write(codec, WM8955_RESET, 0); 134 } 135 136 struct pll_factors { 137 int n; 138 int k; 139 int outdiv; 140 }; 141 142 /* The size in bits of the FLL divide multiplied by 10 143 * to allow rounding later */ 144 #define FIXED_FLL_SIZE ((1 << 22) * 10) 145 146 static int wm8995_pll_factors(struct device *dev, 147 int Fref, int Fout, struct pll_factors *pll) 148 { 149 u64 Kpart; 150 unsigned int K, Ndiv, Nmod, target; 151 152 dev_dbg(dev, "Fref=%u Fout=%u\n", Fref, Fout); 153 154 /* The oscilator should run at should be 90-100MHz, and 155 * there's a divide by 4 plus an optional divide by 2 in the 156 * output path to generate the system clock. The clock table 157 * is sortd so we should always generate a suitable target. */ 158 target = Fout * 4; 159 if (target < 90000000) { 160 pll->outdiv = 1; 161 target *= 2; 162 } else { 163 pll->outdiv = 0; 164 } 165 166 WARN_ON(target < 90000000 || target > 100000000); 167 168 dev_dbg(dev, "Fvco=%dHz\n", target); 169 170 /* Now, calculate N.K */ 171 Ndiv = target / Fref; 172 173 pll->n = Ndiv; 174 Nmod = target % Fref; 175 dev_dbg(dev, "Nmod=%d\n", Nmod); 176 177 /* Calculate fractional part - scale up so we can round. */ 178 Kpart = FIXED_FLL_SIZE * (long long)Nmod; 179 180 do_div(Kpart, Fref); 181 182 K = Kpart & 0xFFFFFFFF; 183 184 if ((K % 10) >= 5) 185 K += 5; 186 187 /* Move down to proper range now rounding is done */ 188 pll->k = K / 10; 189 190 dev_dbg(dev, "N=%x K=%x OUTDIV=%x\n", pll->n, pll->k, pll->outdiv); 191 192 return 0; 193 } 194 195 /* Lookup table specifying SRATE (table 25 in datasheet); some of the 196 * output frequencies have been rounded to the standard frequencies 197 * they are intended to match where the error is slight. */ 198 static struct { 199 int mclk; 200 int fs; 201 int usb; 202 int sr; 203 } clock_cfgs[] = { 204 { 18432000, 8000, 0, 3, }, 205 { 18432000, 12000, 0, 9, }, 206 { 18432000, 16000, 0, 11, }, 207 { 18432000, 24000, 0, 29, }, 208 { 18432000, 32000, 0, 13, }, 209 { 18432000, 48000, 0, 1, }, 210 { 18432000, 96000, 0, 15, }, 211 212 { 16934400, 8018, 0, 19, }, 213 { 16934400, 11025, 0, 25, }, 214 { 16934400, 22050, 0, 27, }, 215 { 16934400, 44100, 0, 17, }, 216 { 16934400, 88200, 0, 31, }, 217 218 { 12000000, 8000, 1, 2, }, 219 { 12000000, 11025, 1, 25, }, 220 { 12000000, 12000, 1, 8, }, 221 { 12000000, 16000, 1, 10, }, 222 { 12000000, 22050, 1, 27, }, 223 { 12000000, 24000, 1, 28, }, 224 { 12000000, 32000, 1, 12, }, 225 { 12000000, 44100, 1, 17, }, 226 { 12000000, 48000, 1, 0, }, 227 { 12000000, 88200, 1, 31, }, 228 { 12000000, 96000, 1, 14, }, 229 230 { 12288000, 8000, 0, 2, }, 231 { 12288000, 12000, 0, 8, }, 232 { 12288000, 16000, 0, 10, }, 233 { 12288000, 24000, 0, 28, }, 234 { 12288000, 32000, 0, 12, }, 235 { 12288000, 48000, 0, 0, }, 236 { 12288000, 96000, 0, 14, }, 237 238 { 12289600, 8018, 0, 18, }, 239 { 12289600, 11025, 0, 24, }, 240 { 12289600, 22050, 0, 26, }, 241 { 11289600, 44100, 0, 16, }, 242 { 11289600, 88200, 0, 31, }, 243 }; 244 245 static int wm8955_configure_clocking(struct snd_soc_codec *codec) 246 { 247 struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec); 248 int i, ret, val; 249 int clocking = 0; 250 int srate = 0; 251 int sr = -1; 252 struct pll_factors pll; 253 254 /* If we're not running a sample rate currently just pick one */ 255 if (wm8955->fs == 0) 256 wm8955->fs = 8000; 257 258 /* Can we generate an exact output? */ 259 for (i = 0; i < ARRAY_SIZE(clock_cfgs); i++) { 260 if (wm8955->fs != clock_cfgs[i].fs) 261 continue; 262 sr = i; 263 264 if (wm8955->mclk_rate == clock_cfgs[i].mclk) 265 break; 266 } 267 268 /* We should never get here with an unsupported sample rate */ 269 if (sr == -1) { 270 dev_err(codec->dev, "Sample rate %dHz unsupported\n", 271 wm8955->fs); 272 WARN_ON(sr == -1); 273 return -EINVAL; 274 } 275 276 if (i == ARRAY_SIZE(clock_cfgs)) { 277 /* If we can't generate the right clock from MCLK then 278 * we should configure the PLL to supply us with an 279 * appropriate clock. 280 */ 281 clocking |= WM8955_MCLKSEL; 282 283 /* Use the last divider configuration we saw for the 284 * sample rate. */ 285 ret = wm8995_pll_factors(codec->dev, wm8955->mclk_rate, 286 clock_cfgs[sr].mclk, &pll); 287 if (ret != 0) { 288 dev_err(codec->dev, 289 "Unable to generate %dHz from %dHz MCLK\n", 290 wm8955->fs, wm8955->mclk_rate); 291 return -EINVAL; 292 } 293 294 snd_soc_update_bits(codec, WM8955_PLL_CONTROL_1, 295 WM8955_N_MASK | WM8955_K_21_18_MASK, 296 (pll.n << WM8955_N_SHIFT) | 297 pll.k >> 18); 298 snd_soc_update_bits(codec, WM8955_PLL_CONTROL_2, 299 WM8955_K_17_9_MASK, 300 (pll.k >> 9) & WM8955_K_17_9_MASK); 301 snd_soc_update_bits(codec, WM8955_PLL_CONTROL_2, 302 WM8955_K_8_0_MASK, 303 pll.k & WM8955_K_8_0_MASK); 304 if (pll.k) 305 snd_soc_update_bits(codec, WM8955_PLL_CONTROL_4, 306 WM8955_KEN, WM8955_KEN); 307 else 308 snd_soc_update_bits(codec, WM8955_PLL_CONTROL_4, 309 WM8955_KEN, 0); 310 311 if (pll.outdiv) 312 val = WM8955_PLL_RB | WM8955_PLLOUTDIV2; 313 else 314 val = WM8955_PLL_RB; 315 316 /* Now start the PLL running */ 317 snd_soc_update_bits(codec, WM8955_CLOCKING_PLL, 318 WM8955_PLL_RB | WM8955_PLLOUTDIV2, val); 319 snd_soc_update_bits(codec, WM8955_CLOCKING_PLL, 320 WM8955_PLLEN, WM8955_PLLEN); 321 } 322 323 srate = clock_cfgs[sr].usb | (clock_cfgs[sr].sr << WM8955_SR_SHIFT); 324 325 snd_soc_update_bits(codec, WM8955_SAMPLE_RATE, 326 WM8955_USB | WM8955_SR_MASK, srate); 327 snd_soc_update_bits(codec, WM8955_CLOCKING_PLL, 328 WM8955_MCLKSEL, clocking); 329 330 return 0; 331 } 332 333 static int wm8955_sysclk(struct snd_soc_dapm_widget *w, 334 struct snd_kcontrol *kcontrol, int event) 335 { 336 struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm); 337 int ret = 0; 338 339 /* Always disable the clocks - if we're doing reconfiguration this 340 * avoids misclocking. 341 */ 342 snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1, 343 WM8955_DIGENB, 0); 344 snd_soc_update_bits(codec, WM8955_CLOCKING_PLL, 345 WM8955_PLL_RB | WM8955_PLLEN, 0); 346 347 switch (event) { 348 case SND_SOC_DAPM_POST_PMD: 349 break; 350 case SND_SOC_DAPM_PRE_PMU: 351 ret = wm8955_configure_clocking(codec); 352 break; 353 default: 354 ret = -EINVAL; 355 break; 356 } 357 358 return ret; 359 } 360 361 static int deemph_settings[] = { 0, 32000, 44100, 48000 }; 362 363 static int wm8955_set_deemph(struct snd_soc_codec *codec) 364 { 365 struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec); 366 int val, i, best; 367 368 /* If we're using deemphasis select the nearest available sample 369 * rate. 370 */ 371 if (wm8955->deemph) { 372 best = 1; 373 for (i = 2; i < ARRAY_SIZE(deemph_settings); i++) { 374 if (abs(deemph_settings[i] - wm8955->fs) < 375 abs(deemph_settings[best] - wm8955->fs)) 376 best = i; 377 } 378 379 val = best << WM8955_DEEMPH_SHIFT; 380 } else { 381 val = 0; 382 } 383 384 dev_dbg(codec->dev, "Set deemphasis %d\n", val); 385 386 return snd_soc_update_bits(codec, WM8955_DAC_CONTROL, 387 WM8955_DEEMPH_MASK, val); 388 } 389 390 static int wm8955_get_deemph(struct snd_kcontrol *kcontrol, 391 struct snd_ctl_elem_value *ucontrol) 392 { 393 struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol); 394 struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec); 395 396 ucontrol->value.integer.value[0] = wm8955->deemph; 397 return 0; 398 } 399 400 static int wm8955_put_deemph(struct snd_kcontrol *kcontrol, 401 struct snd_ctl_elem_value *ucontrol) 402 { 403 struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol); 404 struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec); 405 int deemph = ucontrol->value.integer.value[0]; 406 407 if (deemph > 1) 408 return -EINVAL; 409 410 wm8955->deemph = deemph; 411 412 return wm8955_set_deemph(codec); 413 } 414 415 static const char *bass_mode_text[] = { 416 "Linear", "Adaptive", 417 }; 418 419 static SOC_ENUM_SINGLE_DECL(bass_mode, WM8955_BASS_CONTROL, 7, bass_mode_text); 420 421 static const char *bass_cutoff_text[] = { 422 "Low", "High" 423 }; 424 425 static SOC_ENUM_SINGLE_DECL(bass_cutoff, WM8955_BASS_CONTROL, 6, 426 bass_cutoff_text); 427 428 static const char *treble_cutoff_text[] = { 429 "High", "Low" 430 }; 431 432 static SOC_ENUM_SINGLE_DECL(treble_cutoff, WM8955_TREBLE_CONTROL, 2, 433 treble_cutoff_text); 434 435 static const DECLARE_TLV_DB_SCALE(digital_tlv, -12750, 50, 1); 436 static const DECLARE_TLV_DB_SCALE(atten_tlv, -600, 600, 0); 437 static const DECLARE_TLV_DB_SCALE(bypass_tlv, -1500, 300, 0); 438 static const DECLARE_TLV_DB_SCALE(mono_tlv, -2100, 300, 0); 439 static const DECLARE_TLV_DB_SCALE(out_tlv, -12100, 100, 1); 440 static const DECLARE_TLV_DB_SCALE(treble_tlv, -1200, 150, 1); 441 442 static const struct snd_kcontrol_new wm8955_snd_controls[] = { 443 SOC_DOUBLE_R_TLV("Digital Playback Volume", WM8955_LEFT_DAC_VOLUME, 444 WM8955_RIGHT_DAC_VOLUME, 0, 255, 0, digital_tlv), 445 SOC_SINGLE_TLV("Playback Attenuation Volume", WM8955_DAC_CONTROL, 7, 1, 1, 446 atten_tlv), 447 SOC_SINGLE_BOOL_EXT("DAC Deemphasis Switch", 0, 448 wm8955_get_deemph, wm8955_put_deemph), 449 450 SOC_ENUM("Bass Mode", bass_mode), 451 SOC_ENUM("Bass Cutoff", bass_cutoff), 452 SOC_SINGLE("Bass Volume", WM8955_BASS_CONTROL, 0, 15, 1), 453 454 SOC_ENUM("Treble Cutoff", treble_cutoff), 455 SOC_SINGLE_TLV("Treble Volume", WM8955_TREBLE_CONTROL, 0, 14, 1, treble_tlv), 456 457 SOC_SINGLE_TLV("Left Bypass Volume", WM8955_LEFT_OUT_MIX_1, 4, 7, 1, 458 bypass_tlv), 459 SOC_SINGLE_TLV("Left Mono Volume", WM8955_LEFT_OUT_MIX_2, 4, 7, 1, 460 bypass_tlv), 461 462 SOC_SINGLE_TLV("Right Mono Volume", WM8955_RIGHT_OUT_MIX_1, 4, 7, 1, 463 bypass_tlv), 464 SOC_SINGLE_TLV("Right Bypass Volume", WM8955_RIGHT_OUT_MIX_2, 4, 7, 1, 465 bypass_tlv), 466 467 /* Not a stereo pair so they line up with the DAPM switches */ 468 SOC_SINGLE_TLV("Mono Left Bypass Volume", WM8955_MONO_OUT_MIX_1, 4, 7, 1, 469 mono_tlv), 470 SOC_SINGLE_TLV("Mono Right Bypass Volume", WM8955_MONO_OUT_MIX_2, 4, 7, 1, 471 mono_tlv), 472 473 SOC_DOUBLE_R_TLV("Headphone Volume", WM8955_LOUT1_VOLUME, 474 WM8955_ROUT1_VOLUME, 0, 127, 0, out_tlv), 475 SOC_DOUBLE_R("Headphone ZC Switch", WM8955_LOUT1_VOLUME, 476 WM8955_ROUT1_VOLUME, 7, 1, 0), 477 478 SOC_DOUBLE_R_TLV("Speaker Volume", WM8955_LOUT2_VOLUME, 479 WM8955_ROUT2_VOLUME, 0, 127, 0, out_tlv), 480 SOC_DOUBLE_R("Speaker ZC Switch", WM8955_LOUT2_VOLUME, 481 WM8955_ROUT2_VOLUME, 7, 1, 0), 482 483 SOC_SINGLE_TLV("Mono Volume", WM8955_MONOOUT_VOLUME, 0, 127, 0, out_tlv), 484 SOC_SINGLE("Mono ZC Switch", WM8955_MONOOUT_VOLUME, 7, 1, 0), 485 }; 486 487 static const struct snd_kcontrol_new lmixer[] = { 488 SOC_DAPM_SINGLE("Playback Switch", WM8955_LEFT_OUT_MIX_1, 8, 1, 0), 489 SOC_DAPM_SINGLE("Bypass Switch", WM8955_LEFT_OUT_MIX_1, 7, 1, 0), 490 SOC_DAPM_SINGLE("Right Playback Switch", WM8955_LEFT_OUT_MIX_2, 8, 1, 0), 491 SOC_DAPM_SINGLE("Mono Switch", WM8955_LEFT_OUT_MIX_2, 7, 1, 0), 492 }; 493 494 static const struct snd_kcontrol_new rmixer[] = { 495 SOC_DAPM_SINGLE("Left Playback Switch", WM8955_RIGHT_OUT_MIX_1, 8, 1, 0), 496 SOC_DAPM_SINGLE("Mono Switch", WM8955_RIGHT_OUT_MIX_1, 7, 1, 0), 497 SOC_DAPM_SINGLE("Playback Switch", WM8955_RIGHT_OUT_MIX_2, 8, 1, 0), 498 SOC_DAPM_SINGLE("Bypass Switch", WM8955_RIGHT_OUT_MIX_2, 7, 1, 0), 499 }; 500 501 static const struct snd_kcontrol_new mmixer[] = { 502 SOC_DAPM_SINGLE("Left Playback Switch", WM8955_MONO_OUT_MIX_1, 8, 1, 0), 503 SOC_DAPM_SINGLE("Left Bypass Switch", WM8955_MONO_OUT_MIX_1, 7, 1, 0), 504 SOC_DAPM_SINGLE("Right Playback Switch", WM8955_MONO_OUT_MIX_2, 8, 1, 0), 505 SOC_DAPM_SINGLE("Right Bypass Switch", WM8955_MONO_OUT_MIX_2, 7, 1, 0), 506 }; 507 508 static const struct snd_soc_dapm_widget wm8955_dapm_widgets[] = { 509 SND_SOC_DAPM_INPUT("MONOIN-"), 510 SND_SOC_DAPM_INPUT("MONOIN+"), 511 SND_SOC_DAPM_INPUT("LINEINR"), 512 SND_SOC_DAPM_INPUT("LINEINL"), 513 514 SND_SOC_DAPM_PGA("Mono Input", SND_SOC_NOPM, 0, 0, NULL, 0), 515 516 SND_SOC_DAPM_SUPPLY("SYSCLK", WM8955_POWER_MANAGEMENT_1, 0, 1, wm8955_sysclk, 517 SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), 518 SND_SOC_DAPM_SUPPLY("TSDEN", WM8955_ADDITIONAL_CONTROL_1, 8, 0, NULL, 0), 519 520 SND_SOC_DAPM_DAC("DACL", "Playback", WM8955_POWER_MANAGEMENT_2, 8, 0), 521 SND_SOC_DAPM_DAC("DACR", "Playback", WM8955_POWER_MANAGEMENT_2, 7, 0), 522 523 SND_SOC_DAPM_PGA("LOUT1 PGA", WM8955_POWER_MANAGEMENT_2, 6, 0, NULL, 0), 524 SND_SOC_DAPM_PGA("ROUT1 PGA", WM8955_POWER_MANAGEMENT_2, 5, 0, NULL, 0), 525 SND_SOC_DAPM_PGA("LOUT2 PGA", WM8955_POWER_MANAGEMENT_2, 4, 0, NULL, 0), 526 SND_SOC_DAPM_PGA("ROUT2 PGA", WM8955_POWER_MANAGEMENT_2, 3, 0, NULL, 0), 527 SND_SOC_DAPM_PGA("MOUT PGA", WM8955_POWER_MANAGEMENT_2, 2, 0, NULL, 0), 528 SND_SOC_DAPM_PGA("OUT3 PGA", WM8955_POWER_MANAGEMENT_2, 1, 0, NULL, 0), 529 530 /* The names are chosen to make the control names nice */ 531 SND_SOC_DAPM_MIXER("Left", SND_SOC_NOPM, 0, 0, 532 lmixer, ARRAY_SIZE(lmixer)), 533 SND_SOC_DAPM_MIXER("Right", SND_SOC_NOPM, 0, 0, 534 rmixer, ARRAY_SIZE(rmixer)), 535 SND_SOC_DAPM_MIXER("Mono", SND_SOC_NOPM, 0, 0, 536 mmixer, ARRAY_SIZE(mmixer)), 537 538 SND_SOC_DAPM_OUTPUT("LOUT1"), 539 SND_SOC_DAPM_OUTPUT("ROUT1"), 540 SND_SOC_DAPM_OUTPUT("LOUT2"), 541 SND_SOC_DAPM_OUTPUT("ROUT2"), 542 SND_SOC_DAPM_OUTPUT("MONOOUT"), 543 SND_SOC_DAPM_OUTPUT("OUT3"), 544 }; 545 546 static const struct snd_soc_dapm_route wm8955_dapm_routes[] = { 547 { "DACL", NULL, "SYSCLK" }, 548 { "DACR", NULL, "SYSCLK" }, 549 550 { "Mono Input", NULL, "MONOIN-" }, 551 { "Mono Input", NULL, "MONOIN+" }, 552 553 { "Left", "Playback Switch", "DACL" }, 554 { "Left", "Right Playback Switch", "DACR" }, 555 { "Left", "Bypass Switch", "LINEINL" }, 556 { "Left", "Mono Switch", "Mono Input" }, 557 558 { "Right", "Playback Switch", "DACR" }, 559 { "Right", "Left Playback Switch", "DACL" }, 560 { "Right", "Bypass Switch", "LINEINR" }, 561 { "Right", "Mono Switch", "Mono Input" }, 562 563 { "Mono", "Left Playback Switch", "DACL" }, 564 { "Mono", "Right Playback Switch", "DACR" }, 565 { "Mono", "Left Bypass Switch", "LINEINL" }, 566 { "Mono", "Right Bypass Switch", "LINEINR" }, 567 568 { "LOUT1 PGA", NULL, "Left" }, 569 { "LOUT1", NULL, "TSDEN" }, 570 { "LOUT1", NULL, "LOUT1 PGA" }, 571 572 { "ROUT1 PGA", NULL, "Right" }, 573 { "ROUT1", NULL, "TSDEN" }, 574 { "ROUT1", NULL, "ROUT1 PGA" }, 575 576 { "LOUT2 PGA", NULL, "Left" }, 577 { "LOUT2", NULL, "TSDEN" }, 578 { "LOUT2", NULL, "LOUT2 PGA" }, 579 580 { "ROUT2 PGA", NULL, "Right" }, 581 { "ROUT2", NULL, "TSDEN" }, 582 { "ROUT2", NULL, "ROUT2 PGA" }, 583 584 { "MOUT PGA", NULL, "Mono" }, 585 { "MONOOUT", NULL, "MOUT PGA" }, 586 587 /* OUT3 not currently implemented */ 588 { "OUT3", NULL, "OUT3 PGA" }, 589 }; 590 591 static int wm8955_hw_params(struct snd_pcm_substream *substream, 592 struct snd_pcm_hw_params *params, 593 struct snd_soc_dai *dai) 594 { 595 struct snd_soc_codec *codec = dai->codec; 596 struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec); 597 int ret; 598 int wl; 599 600 switch (params_width(params)) { 601 case 16: 602 wl = 0; 603 break; 604 case 20: 605 wl = 0x4; 606 break; 607 case 24: 608 wl = 0x8; 609 break; 610 case 32: 611 wl = 0xc; 612 break; 613 default: 614 return -EINVAL; 615 } 616 snd_soc_update_bits(codec, WM8955_AUDIO_INTERFACE, 617 WM8955_WL_MASK, wl); 618 619 wm8955->fs = params_rate(params); 620 wm8955_set_deemph(codec); 621 622 /* If the chip is clocked then disable the clocks and force a 623 * reconfiguration, otherwise DAPM will power up the 624 * clocks for us later. */ 625 ret = snd_soc_read(codec, WM8955_POWER_MANAGEMENT_1); 626 if (ret < 0) 627 return ret; 628 if (ret & WM8955_DIGENB) { 629 snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1, 630 WM8955_DIGENB, 0); 631 snd_soc_update_bits(codec, WM8955_CLOCKING_PLL, 632 WM8955_PLL_RB | WM8955_PLLEN, 0); 633 634 wm8955_configure_clocking(codec); 635 } 636 637 return 0; 638 } 639 640 641 static int wm8955_set_sysclk(struct snd_soc_dai *dai, int clk_id, 642 unsigned int freq, int dir) 643 { 644 struct snd_soc_codec *codec = dai->codec; 645 struct wm8955_priv *priv = snd_soc_codec_get_drvdata(codec); 646 int div; 647 648 switch (clk_id) { 649 case WM8955_CLK_MCLK: 650 if (freq > 15000000) { 651 priv->mclk_rate = freq /= 2; 652 div = WM8955_MCLKDIV2; 653 } else { 654 priv->mclk_rate = freq; 655 div = 0; 656 } 657 658 snd_soc_update_bits(codec, WM8955_SAMPLE_RATE, 659 WM8955_MCLKDIV2, div); 660 break; 661 662 default: 663 return -EINVAL; 664 } 665 666 dev_dbg(dai->dev, "Clock source is %d at %uHz\n", clk_id, freq); 667 668 return 0; 669 } 670 671 static int wm8955_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) 672 { 673 struct snd_soc_codec *codec = dai->codec; 674 u16 aif = 0; 675 676 switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { 677 case SND_SOC_DAIFMT_CBS_CFS: 678 break; 679 case SND_SOC_DAIFMT_CBM_CFM: 680 aif |= WM8955_MS; 681 break; 682 default: 683 return -EINVAL; 684 } 685 686 switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { 687 case SND_SOC_DAIFMT_DSP_B: 688 aif |= WM8955_LRP; 689 case SND_SOC_DAIFMT_DSP_A: 690 aif |= 0x3; 691 break; 692 case SND_SOC_DAIFMT_I2S: 693 aif |= 0x2; 694 break; 695 case SND_SOC_DAIFMT_RIGHT_J: 696 break; 697 case SND_SOC_DAIFMT_LEFT_J: 698 aif |= 0x1; 699 break; 700 default: 701 return -EINVAL; 702 } 703 704 switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { 705 case SND_SOC_DAIFMT_DSP_A: 706 case SND_SOC_DAIFMT_DSP_B: 707 /* frame inversion not valid for DSP modes */ 708 switch (fmt & SND_SOC_DAIFMT_INV_MASK) { 709 case SND_SOC_DAIFMT_NB_NF: 710 break; 711 case SND_SOC_DAIFMT_IB_NF: 712 aif |= WM8955_BCLKINV; 713 break; 714 default: 715 return -EINVAL; 716 } 717 break; 718 719 case SND_SOC_DAIFMT_I2S: 720 case SND_SOC_DAIFMT_RIGHT_J: 721 case SND_SOC_DAIFMT_LEFT_J: 722 switch (fmt & SND_SOC_DAIFMT_INV_MASK) { 723 case SND_SOC_DAIFMT_NB_NF: 724 break; 725 case SND_SOC_DAIFMT_IB_IF: 726 aif |= WM8955_BCLKINV | WM8955_LRP; 727 break; 728 case SND_SOC_DAIFMT_IB_NF: 729 aif |= WM8955_BCLKINV; 730 break; 731 case SND_SOC_DAIFMT_NB_IF: 732 aif |= WM8955_LRP; 733 break; 734 default: 735 return -EINVAL; 736 } 737 break; 738 default: 739 return -EINVAL; 740 } 741 742 snd_soc_update_bits(codec, WM8955_AUDIO_INTERFACE, 743 WM8955_MS | WM8955_FORMAT_MASK | WM8955_BCLKINV | 744 WM8955_LRP, aif); 745 746 return 0; 747 } 748 749 750 static int wm8955_digital_mute(struct snd_soc_dai *codec_dai, int mute) 751 { 752 struct snd_soc_codec *codec = codec_dai->codec; 753 int val; 754 755 if (mute) 756 val = WM8955_DACMU; 757 else 758 val = 0; 759 760 snd_soc_update_bits(codec, WM8955_DAC_CONTROL, WM8955_DACMU, val); 761 762 return 0; 763 } 764 765 static int wm8955_set_bias_level(struct snd_soc_codec *codec, 766 enum snd_soc_bias_level level) 767 { 768 struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec); 769 int ret; 770 771 switch (level) { 772 case SND_SOC_BIAS_ON: 773 break; 774 775 case SND_SOC_BIAS_PREPARE: 776 /* VMID resistance 2*50k */ 777 snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1, 778 WM8955_VMIDSEL_MASK, 779 0x1 << WM8955_VMIDSEL_SHIFT); 780 781 /* Default bias current */ 782 snd_soc_update_bits(codec, WM8955_ADDITIONAL_CONTROL_1, 783 WM8955_VSEL_MASK, 784 0x2 << WM8955_VSEL_SHIFT); 785 break; 786 787 case SND_SOC_BIAS_STANDBY: 788 if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) { 789 ret = regulator_bulk_enable(ARRAY_SIZE(wm8955->supplies), 790 wm8955->supplies); 791 if (ret != 0) { 792 dev_err(codec->dev, 793 "Failed to enable supplies: %d\n", 794 ret); 795 return ret; 796 } 797 798 regcache_sync(wm8955->regmap); 799 800 /* Enable VREF and VMID */ 801 snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1, 802 WM8955_VREF | 803 WM8955_VMIDSEL_MASK, 804 WM8955_VREF | 805 0x3 << WM8955_VREF_SHIFT); 806 807 /* Let VMID ramp */ 808 msleep(500); 809 810 /* High resistance VROI to maintain outputs */ 811 snd_soc_update_bits(codec, 812 WM8955_ADDITIONAL_CONTROL_3, 813 WM8955_VROI, WM8955_VROI); 814 } 815 816 /* Maintain VMID with 2*250k */ 817 snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1, 818 WM8955_VMIDSEL_MASK, 819 0x2 << WM8955_VMIDSEL_SHIFT); 820 821 /* Minimum bias current */ 822 snd_soc_update_bits(codec, WM8955_ADDITIONAL_CONTROL_1, 823 WM8955_VSEL_MASK, 0); 824 break; 825 826 case SND_SOC_BIAS_OFF: 827 /* Low resistance VROI to help discharge */ 828 snd_soc_update_bits(codec, 829 WM8955_ADDITIONAL_CONTROL_3, 830 WM8955_VROI, 0); 831 832 /* Turn off VMID and VREF */ 833 snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1, 834 WM8955_VREF | 835 WM8955_VMIDSEL_MASK, 0); 836 837 regulator_bulk_disable(ARRAY_SIZE(wm8955->supplies), 838 wm8955->supplies); 839 break; 840 } 841 codec->dapm.bias_level = level; 842 return 0; 843 } 844 845 #define WM8955_RATES SNDRV_PCM_RATE_8000_96000 846 847 #define WM8955_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\ 848 SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) 849 850 static const struct snd_soc_dai_ops wm8955_dai_ops = { 851 .set_sysclk = wm8955_set_sysclk, 852 .set_fmt = wm8955_set_fmt, 853 .hw_params = wm8955_hw_params, 854 .digital_mute = wm8955_digital_mute, 855 }; 856 857 static struct snd_soc_dai_driver wm8955_dai = { 858 .name = "wm8955-hifi", 859 .playback = { 860 .stream_name = "Playback", 861 .channels_min = 2, 862 .channels_max = 2, 863 .rates = WM8955_RATES, 864 .formats = WM8955_FORMATS, 865 }, 866 .ops = &wm8955_dai_ops, 867 }; 868 869 static int wm8955_probe(struct snd_soc_codec *codec) 870 { 871 struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec); 872 struct wm8955_pdata *pdata = dev_get_platdata(codec->dev); 873 int ret, i; 874 875 for (i = 0; i < ARRAY_SIZE(wm8955->supplies); i++) 876 wm8955->supplies[i].supply = wm8955_supply_names[i]; 877 878 ret = devm_regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8955->supplies), 879 wm8955->supplies); 880 if (ret != 0) { 881 dev_err(codec->dev, "Failed to request supplies: %d\n", ret); 882 return ret; 883 } 884 885 ret = regulator_bulk_enable(ARRAY_SIZE(wm8955->supplies), 886 wm8955->supplies); 887 if (ret != 0) { 888 dev_err(codec->dev, "Failed to enable supplies: %d\n", ret); 889 return ret; 890 } 891 892 ret = wm8955_reset(codec); 893 if (ret < 0) { 894 dev_err(codec->dev, "Failed to issue reset: %d\n", ret); 895 goto err_enable; 896 } 897 898 /* Change some default settings - latch VU and enable ZC */ 899 snd_soc_update_bits(codec, WM8955_LEFT_DAC_VOLUME, 900 WM8955_LDVU, WM8955_LDVU); 901 snd_soc_update_bits(codec, WM8955_RIGHT_DAC_VOLUME, 902 WM8955_RDVU, WM8955_RDVU); 903 snd_soc_update_bits(codec, WM8955_LOUT1_VOLUME, 904 WM8955_LO1VU | WM8955_LO1ZC, 905 WM8955_LO1VU | WM8955_LO1ZC); 906 snd_soc_update_bits(codec, WM8955_ROUT1_VOLUME, 907 WM8955_RO1VU | WM8955_RO1ZC, 908 WM8955_RO1VU | WM8955_RO1ZC); 909 snd_soc_update_bits(codec, WM8955_LOUT2_VOLUME, 910 WM8955_LO2VU | WM8955_LO2ZC, 911 WM8955_LO2VU | WM8955_LO2ZC); 912 snd_soc_update_bits(codec, WM8955_ROUT2_VOLUME, 913 WM8955_RO2VU | WM8955_RO2ZC, 914 WM8955_RO2VU | WM8955_RO2ZC); 915 snd_soc_update_bits(codec, WM8955_MONOOUT_VOLUME, 916 WM8955_MOZC, WM8955_MOZC); 917 918 /* Also enable adaptive bass boost by default */ 919 snd_soc_update_bits(codec, WM8955_BASS_CONTROL, WM8955_BB, WM8955_BB); 920 921 /* Set platform data values */ 922 if (pdata) { 923 if (pdata->out2_speaker) 924 snd_soc_update_bits(codec, WM8955_ADDITIONAL_CONTROL_2, 925 WM8955_ROUT2INV, WM8955_ROUT2INV); 926 927 if (pdata->monoin_diff) 928 snd_soc_update_bits(codec, WM8955_MONO_OUT_MIX_1, 929 WM8955_DMEN, WM8955_DMEN); 930 } 931 932 wm8955_set_bias_level(codec, SND_SOC_BIAS_STANDBY); 933 934 /* Bias level configuration will have done an extra enable */ 935 regulator_bulk_disable(ARRAY_SIZE(wm8955->supplies), wm8955->supplies); 936 937 return 0; 938 939 err_enable: 940 regulator_bulk_disable(ARRAY_SIZE(wm8955->supplies), wm8955->supplies); 941 return ret; 942 } 943 944 static struct snd_soc_codec_driver soc_codec_dev_wm8955 = { 945 .probe = wm8955_probe, 946 .set_bias_level = wm8955_set_bias_level, 947 .suspend_bias_off = true, 948 949 .controls = wm8955_snd_controls, 950 .num_controls = ARRAY_SIZE(wm8955_snd_controls), 951 .dapm_widgets = wm8955_dapm_widgets, 952 .num_dapm_widgets = ARRAY_SIZE(wm8955_dapm_widgets), 953 .dapm_routes = wm8955_dapm_routes, 954 .num_dapm_routes = ARRAY_SIZE(wm8955_dapm_routes), 955 }; 956 957 static const struct regmap_config wm8955_regmap = { 958 .reg_bits = 7, 959 .val_bits = 9, 960 961 .max_register = WM8955_MAX_REGISTER, 962 .volatile_reg = wm8955_volatile, 963 .writeable_reg = wm8955_writeable, 964 965 .cache_type = REGCACHE_RBTREE, 966 .reg_defaults = wm8955_reg_defaults, 967 .num_reg_defaults = ARRAY_SIZE(wm8955_reg_defaults), 968 }; 969 970 static int wm8955_i2c_probe(struct i2c_client *i2c, 971 const struct i2c_device_id *id) 972 { 973 struct wm8955_priv *wm8955; 974 int ret; 975 976 wm8955 = devm_kzalloc(&i2c->dev, sizeof(struct wm8955_priv), 977 GFP_KERNEL); 978 if (wm8955 == NULL) 979 return -ENOMEM; 980 981 wm8955->regmap = devm_regmap_init_i2c(i2c, &wm8955_regmap); 982 if (IS_ERR(wm8955->regmap)) { 983 ret = PTR_ERR(wm8955->regmap); 984 dev_err(&i2c->dev, "Failed to allocate register map: %d\n", 985 ret); 986 return ret; 987 } 988 989 i2c_set_clientdata(i2c, wm8955); 990 991 ret = snd_soc_register_codec(&i2c->dev, 992 &soc_codec_dev_wm8955, &wm8955_dai, 1); 993 994 return ret; 995 } 996 997 static int wm8955_i2c_remove(struct i2c_client *client) 998 { 999 snd_soc_unregister_codec(&client->dev); 1000 1001 return 0; 1002 } 1003 1004 static const struct i2c_device_id wm8955_i2c_id[] = { 1005 { "wm8955", 0 }, 1006 { } 1007 }; 1008 MODULE_DEVICE_TABLE(i2c, wm8955_i2c_id); 1009 1010 static struct i2c_driver wm8955_i2c_driver = { 1011 .driver = { 1012 .name = "wm8955", 1013 .owner = THIS_MODULE, 1014 }, 1015 .probe = wm8955_i2c_probe, 1016 .remove = wm8955_i2c_remove, 1017 .id_table = wm8955_i2c_id, 1018 }; 1019 1020 module_i2c_driver(wm8955_i2c_driver); 1021 1022 MODULE_DESCRIPTION("ASoC WM8955 driver"); 1023 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); 1024 MODULE_LICENSE("GPL"); 1025