1 /* 2 * Texas Instruments TLV320AIC26 low power audio CODEC 3 * ALSA SoC CODEC driver 4 * 5 * Copyright (C) 2008 Secret Lab Technologies Ltd. 6 */ 7 8 #include <linux/module.h> 9 #include <linux/moduleparam.h> 10 #include <linux/init.h> 11 #include <linux/delay.h> 12 #include <linux/pm.h> 13 #include <linux/device.h> 14 #include <linux/sysfs.h> 15 #include <linux/spi/spi.h> 16 #include <linux/slab.h> 17 #include <sound/core.h> 18 #include <sound/pcm.h> 19 #include <sound/pcm_params.h> 20 #include <sound/soc.h> 21 #include <sound/initval.h> 22 23 #include "tlv320aic26.h" 24 25 MODULE_DESCRIPTION("ASoC TLV320AIC26 codec driver"); 26 MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>"); 27 MODULE_LICENSE("GPL"); 28 29 /* AIC26 driver private data */ 30 struct aic26 { 31 struct spi_device *spi; 32 struct snd_soc_codec codec; 33 int master; 34 int datfm; 35 int mclk; 36 37 /* Keyclick parameters */ 38 int keyclick_amplitude; 39 int keyclick_freq; 40 int keyclick_len; 41 }; 42 43 /* --------------------------------------------------------------------- 44 * Register access routines 45 */ 46 static unsigned int aic26_reg_read(struct snd_soc_codec *codec, 47 unsigned int reg) 48 { 49 struct aic26 *aic26 = snd_soc_codec_get_drvdata(codec); 50 u16 *cache = codec->reg_cache; 51 u16 cmd, value; 52 u8 buffer[2]; 53 int rc; 54 55 if (reg >= AIC26_NUM_REGS) { 56 WARN_ON_ONCE(1); 57 return 0; 58 } 59 60 /* Do SPI transfer; first 16bits are command; remaining is 61 * register contents */ 62 cmd = AIC26_READ_COMMAND_WORD(reg); 63 buffer[0] = (cmd >> 8) & 0xff; 64 buffer[1] = cmd & 0xff; 65 rc = spi_write_then_read(aic26->spi, buffer, 2, buffer, 2); 66 if (rc) { 67 dev_err(&aic26->spi->dev, "AIC26 reg read error\n"); 68 return -EIO; 69 } 70 value = (buffer[0] << 8) | buffer[1]; 71 72 /* Update the cache before returning with the value */ 73 cache[reg] = value; 74 return value; 75 } 76 77 static unsigned int aic26_reg_read_cache(struct snd_soc_codec *codec, 78 unsigned int reg) 79 { 80 u16 *cache = codec->reg_cache; 81 82 if (reg >= AIC26_NUM_REGS) { 83 WARN_ON_ONCE(1); 84 return 0; 85 } 86 87 return cache[reg]; 88 } 89 90 static int aic26_reg_write(struct snd_soc_codec *codec, unsigned int reg, 91 unsigned int value) 92 { 93 struct aic26 *aic26 = snd_soc_codec_get_drvdata(codec); 94 u16 *cache = codec->reg_cache; 95 u16 cmd; 96 u8 buffer[4]; 97 int rc; 98 99 if (reg >= AIC26_NUM_REGS) { 100 WARN_ON_ONCE(1); 101 return -EINVAL; 102 } 103 104 /* Do SPI transfer; first 16bits are command; remaining is data 105 * to write into register */ 106 cmd = AIC26_WRITE_COMMAND_WORD(reg); 107 buffer[0] = (cmd >> 8) & 0xff; 108 buffer[1] = cmd & 0xff; 109 buffer[2] = value >> 8; 110 buffer[3] = value; 111 rc = spi_write(aic26->spi, buffer, 4); 112 if (rc) { 113 dev_err(&aic26->spi->dev, "AIC26 reg read error\n"); 114 return -EIO; 115 } 116 117 /* update cache before returning */ 118 cache[reg] = value; 119 return 0; 120 } 121 122 /* --------------------------------------------------------------------- 123 * Digital Audio Interface Operations 124 */ 125 static int aic26_hw_params(struct snd_pcm_substream *substream, 126 struct snd_pcm_hw_params *params, 127 struct snd_soc_dai *dai) 128 { 129 struct snd_soc_pcm_runtime *rtd = substream->private_data; 130 struct snd_soc_codec *codec = rtd->codec; 131 struct aic26 *aic26 = snd_soc_codec_get_drvdata(codec); 132 int fsref, divisor, wlen, pval, jval, dval, qval; 133 u16 reg; 134 135 dev_dbg(&aic26->spi->dev, "aic26_hw_params(substream=%p, params=%p)\n", 136 substream, params); 137 dev_dbg(&aic26->spi->dev, "rate=%i format=%i\n", params_rate(params), 138 params_format(params)); 139 140 switch (params_rate(params)) { 141 case 8000: fsref = 48000; divisor = AIC26_DIV_6; break; 142 case 11025: fsref = 44100; divisor = AIC26_DIV_4; break; 143 case 12000: fsref = 48000; divisor = AIC26_DIV_4; break; 144 case 16000: fsref = 48000; divisor = AIC26_DIV_3; break; 145 case 22050: fsref = 44100; divisor = AIC26_DIV_2; break; 146 case 24000: fsref = 48000; divisor = AIC26_DIV_2; break; 147 case 32000: fsref = 48000; divisor = AIC26_DIV_1_5; break; 148 case 44100: fsref = 44100; divisor = AIC26_DIV_1; break; 149 case 48000: fsref = 48000; divisor = AIC26_DIV_1; break; 150 default: 151 dev_dbg(&aic26->spi->dev, "bad rate\n"); return -EINVAL; 152 } 153 154 /* select data word length */ 155 switch (params_format(params)) { 156 case SNDRV_PCM_FORMAT_S8: wlen = AIC26_WLEN_16; break; 157 case SNDRV_PCM_FORMAT_S16_BE: wlen = AIC26_WLEN_16; break; 158 case SNDRV_PCM_FORMAT_S24_BE: wlen = AIC26_WLEN_24; break; 159 case SNDRV_PCM_FORMAT_S32_BE: wlen = AIC26_WLEN_32; break; 160 default: 161 dev_dbg(&aic26->spi->dev, "bad format\n"); return -EINVAL; 162 } 163 164 /** 165 * Configure PLL 166 * fsref = (mclk * PLLM) / 2048 167 * where PLLM = J.DDDD (DDDD register ranges from 0 to 9999, decimal) 168 */ 169 pval = 1; 170 /* compute J portion of multiplier */ 171 jval = fsref / (aic26->mclk / 2048); 172 /* compute fractional DDDD component of multiplier */ 173 dval = fsref - (jval * (aic26->mclk / 2048)); 174 dval = (10000 * dval) / (aic26->mclk / 2048); 175 dev_dbg(&aic26->spi->dev, "Setting PLLM to %d.%04d\n", jval, dval); 176 qval = 0; 177 reg = 0x8000 | qval << 11 | pval << 8 | jval << 2; 178 aic26_reg_write(codec, AIC26_REG_PLL_PROG1, reg); 179 reg = dval << 2; 180 aic26_reg_write(codec, AIC26_REG_PLL_PROG2, reg); 181 182 /* Audio Control 3 (master mode, fsref rate) */ 183 reg = aic26_reg_read_cache(codec, AIC26_REG_AUDIO_CTRL3); 184 reg &= ~0xf800; 185 if (aic26->master) 186 reg |= 0x0800; 187 if (fsref == 48000) 188 reg |= 0x2000; 189 aic26_reg_write(codec, AIC26_REG_AUDIO_CTRL3, reg); 190 191 /* Audio Control 1 (FSref divisor) */ 192 reg = aic26_reg_read_cache(codec, AIC26_REG_AUDIO_CTRL1); 193 reg &= ~0x0fff; 194 reg |= wlen | aic26->datfm | (divisor << 3) | divisor; 195 aic26_reg_write(codec, AIC26_REG_AUDIO_CTRL1, reg); 196 197 return 0; 198 } 199 200 /** 201 * aic26_mute - Mute control to reduce noise when changing audio format 202 */ 203 static int aic26_mute(struct snd_soc_dai *dai, int mute) 204 { 205 struct snd_soc_codec *codec = dai->codec; 206 struct aic26 *aic26 = snd_soc_codec_get_drvdata(codec); 207 u16 reg = aic26_reg_read_cache(codec, AIC26_REG_DAC_GAIN); 208 209 dev_dbg(&aic26->spi->dev, "aic26_mute(dai=%p, mute=%i)\n", 210 dai, mute); 211 212 if (mute) 213 reg |= 0x8080; 214 else 215 reg &= ~0x8080; 216 aic26_reg_write(codec, AIC26_REG_DAC_GAIN, reg); 217 218 return 0; 219 } 220 221 static int aic26_set_sysclk(struct snd_soc_dai *codec_dai, 222 int clk_id, unsigned int freq, int dir) 223 { 224 struct snd_soc_codec *codec = codec_dai->codec; 225 struct aic26 *aic26 = snd_soc_codec_get_drvdata(codec); 226 227 dev_dbg(&aic26->spi->dev, "aic26_set_sysclk(dai=%p, clk_id==%i," 228 " freq=%i, dir=%i)\n", 229 codec_dai, clk_id, freq, dir); 230 231 /* MCLK needs to fall between 2MHz and 50 MHz */ 232 if ((freq < 2000000) || (freq > 50000000)) 233 return -EINVAL; 234 235 aic26->mclk = freq; 236 return 0; 237 } 238 239 static int aic26_set_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) 240 { 241 struct snd_soc_codec *codec = codec_dai->codec; 242 struct aic26 *aic26 = snd_soc_codec_get_drvdata(codec); 243 244 dev_dbg(&aic26->spi->dev, "aic26_set_fmt(dai=%p, fmt==%i)\n", 245 codec_dai, fmt); 246 247 /* set master/slave audio interface */ 248 switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { 249 case SND_SOC_DAIFMT_CBM_CFM: aic26->master = 1; break; 250 case SND_SOC_DAIFMT_CBS_CFS: aic26->master = 0; break; 251 default: 252 dev_dbg(&aic26->spi->dev, "bad master\n"); return -EINVAL; 253 } 254 255 /* interface format */ 256 switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { 257 case SND_SOC_DAIFMT_I2S: aic26->datfm = AIC26_DATFM_I2S; break; 258 case SND_SOC_DAIFMT_DSP_A: aic26->datfm = AIC26_DATFM_DSP; break; 259 case SND_SOC_DAIFMT_RIGHT_J: aic26->datfm = AIC26_DATFM_RIGHTJ; break; 260 case SND_SOC_DAIFMT_LEFT_J: aic26->datfm = AIC26_DATFM_LEFTJ; break; 261 default: 262 dev_dbg(&aic26->spi->dev, "bad format\n"); return -EINVAL; 263 } 264 265 return 0; 266 } 267 268 /* --------------------------------------------------------------------- 269 * Digital Audio Interface Definition 270 */ 271 #define AIC26_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\ 272 SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |\ 273 SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\ 274 SNDRV_PCM_RATE_48000) 275 #define AIC26_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_BE |\ 276 SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S32_BE) 277 278 static const struct snd_soc_dai_ops aic26_dai_ops = { 279 .hw_params = aic26_hw_params, 280 .digital_mute = aic26_mute, 281 .set_sysclk = aic26_set_sysclk, 282 .set_fmt = aic26_set_fmt, 283 }; 284 285 static struct snd_soc_dai_driver aic26_dai = { 286 .name = "tlv320aic26-hifi", 287 .playback = { 288 .stream_name = "Playback", 289 .channels_min = 2, 290 .channels_max = 2, 291 .rates = AIC26_RATES, 292 .formats = AIC26_FORMATS, 293 }, 294 .capture = { 295 .stream_name = "Capture", 296 .channels_min = 2, 297 .channels_max = 2, 298 .rates = AIC26_RATES, 299 .formats = AIC26_FORMATS, 300 }, 301 .ops = &aic26_dai_ops, 302 }; 303 304 /* --------------------------------------------------------------------- 305 * ALSA controls 306 */ 307 static const char *aic26_capture_src_text[] = {"Mic", "Aux"}; 308 static const struct soc_enum aic26_capture_src_enum = 309 SOC_ENUM_SINGLE(AIC26_REG_AUDIO_CTRL1, 12, 2, aic26_capture_src_text); 310 311 static const struct snd_kcontrol_new aic26_snd_controls[] = { 312 /* Output */ 313 SOC_DOUBLE("PCM Playback Volume", AIC26_REG_DAC_GAIN, 8, 0, 0x7f, 1), 314 SOC_DOUBLE("PCM Playback Switch", AIC26_REG_DAC_GAIN, 15, 7, 1, 1), 315 SOC_SINGLE("PCM Capture Volume", AIC26_REG_ADC_GAIN, 8, 0x7f, 0), 316 SOC_SINGLE("PCM Capture Mute", AIC26_REG_ADC_GAIN, 15, 1, 1), 317 SOC_SINGLE("Keyclick activate", AIC26_REG_AUDIO_CTRL2, 15, 0x1, 0), 318 SOC_SINGLE("Keyclick amplitude", AIC26_REG_AUDIO_CTRL2, 12, 0x7, 0), 319 SOC_SINGLE("Keyclick frequency", AIC26_REG_AUDIO_CTRL2, 8, 0x7, 0), 320 SOC_SINGLE("Keyclick period", AIC26_REG_AUDIO_CTRL2, 4, 0xf, 0), 321 SOC_ENUM("Capture Source", aic26_capture_src_enum), 322 }; 323 324 /* --------------------------------------------------------------------- 325 * SPI device portion of driver: sysfs files for debugging 326 */ 327 328 static ssize_t aic26_keyclick_show(struct device *dev, 329 struct device_attribute *attr, char *buf) 330 { 331 struct aic26 *aic26 = dev_get_drvdata(dev); 332 int val, amp, freq, len; 333 334 val = aic26_reg_read_cache(&aic26->codec, AIC26_REG_AUDIO_CTRL2); 335 amp = (val >> 12) & 0x7; 336 freq = (125 << ((val >> 8) & 0x7)) >> 1; 337 len = 2 * (1 + ((val >> 4) & 0xf)); 338 339 return sprintf(buf, "amp=%x freq=%iHz len=%iclks\n", amp, freq, len); 340 } 341 342 /* Any write to the keyclick attribute will trigger the keyclick event */ 343 static ssize_t aic26_keyclick_set(struct device *dev, 344 struct device_attribute *attr, 345 const char *buf, size_t count) 346 { 347 struct aic26 *aic26 = dev_get_drvdata(dev); 348 int val; 349 350 val = aic26_reg_read_cache(&aic26->codec, AIC26_REG_AUDIO_CTRL2); 351 val |= 0x8000; 352 aic26_reg_write(&aic26->codec, AIC26_REG_AUDIO_CTRL2, val); 353 354 return count; 355 } 356 357 static DEVICE_ATTR(keyclick, 0644, aic26_keyclick_show, aic26_keyclick_set); 358 359 /* --------------------------------------------------------------------- 360 * SoC CODEC portion of driver: probe and release routines 361 */ 362 static int aic26_probe(struct snd_soc_codec *codec) 363 { 364 int ret, err, i, reg; 365 366 dev_info(codec->dev, "Probing AIC26 SoC CODEC driver\n"); 367 368 /* Reset the codec to power on defaults */ 369 aic26_reg_write(codec, AIC26_REG_RESET, 0xBB00); 370 371 /* Power up CODEC */ 372 aic26_reg_write(codec, AIC26_REG_POWER_CTRL, 0); 373 374 /* Audio Control 3 (master mode, fsref rate) */ 375 reg = aic26_reg_read(codec, AIC26_REG_AUDIO_CTRL3); 376 reg &= ~0xf800; 377 reg |= 0x0800; /* set master mode */ 378 aic26_reg_write(codec, AIC26_REG_AUDIO_CTRL3, reg); 379 380 /* Fill register cache */ 381 for (i = 0; i < codec->driver->reg_cache_size; i++) 382 aic26_reg_read(codec, i); 383 384 /* Register the sysfs files for debugging */ 385 /* Create SysFS files */ 386 ret = device_create_file(codec->dev, &dev_attr_keyclick); 387 if (ret) 388 dev_info(codec->dev, "error creating sysfs files\n"); 389 390 /* register controls */ 391 dev_dbg(codec->dev, "Registering controls\n"); 392 err = snd_soc_add_codec_controls(codec, aic26_snd_controls, 393 ARRAY_SIZE(aic26_snd_controls)); 394 WARN_ON(err < 0); 395 396 return 0; 397 } 398 399 static struct snd_soc_codec_driver aic26_soc_codec_dev = { 400 .probe = aic26_probe, 401 .read = aic26_reg_read, 402 .write = aic26_reg_write, 403 .reg_cache_size = AIC26_NUM_REGS, 404 .reg_word_size = sizeof(u16), 405 }; 406 407 /* --------------------------------------------------------------------- 408 * SPI device portion of driver: probe and release routines and SPI 409 * driver registration. 410 */ 411 static int aic26_spi_probe(struct spi_device *spi) 412 { 413 struct aic26 *aic26; 414 int ret; 415 416 dev_dbg(&spi->dev, "probing tlv320aic26 spi device\n"); 417 418 /* Allocate driver data */ 419 aic26 = devm_kzalloc(&spi->dev, sizeof *aic26, GFP_KERNEL); 420 if (!aic26) 421 return -ENOMEM; 422 423 /* Initialize the driver data */ 424 aic26->spi = spi; 425 dev_set_drvdata(&spi->dev, aic26); 426 aic26->master = 1; 427 428 ret = snd_soc_register_codec(&spi->dev, 429 &aic26_soc_codec_dev, &aic26_dai, 1); 430 return ret; 431 } 432 433 static int aic26_spi_remove(struct spi_device *spi) 434 { 435 snd_soc_unregister_codec(&spi->dev); 436 return 0; 437 } 438 439 static struct spi_driver aic26_spi = { 440 .driver = { 441 .name = "tlv320aic26-codec", 442 .owner = THIS_MODULE, 443 }, 444 .probe = aic26_spi_probe, 445 .remove = aic26_spi_remove, 446 }; 447 448 static int __init aic26_init(void) 449 { 450 return spi_register_driver(&aic26_spi); 451 } 452 module_init(aic26_init); 453 454 static void __exit aic26_exit(void) 455 { 456 spi_unregister_driver(&aic26_spi); 457 } 458 module_exit(aic26_exit); 459