1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * ALSA SoC Texas Instruments TAS6424 Quad-Channel Audio Amplifier 4 * 5 * Copyright (C) 2016-2017 Texas Instruments Incorporated - https://www.ti.com/ 6 * Author: Andreas Dannenberg <dannenberg@ti.com> 7 * Andrew F. Davis <afd@ti.com> 8 */ 9 10 #include <linux/module.h> 11 #include <linux/errno.h> 12 #include <linux/device.h> 13 #include <linux/i2c.h> 14 #include <linux/regmap.h> 15 #include <linux/slab.h> 16 #include <linux/regulator/consumer.h> 17 #include <linux/delay.h> 18 #include <linux/gpio/consumer.h> 19 20 #include <sound/pcm.h> 21 #include <sound/pcm_params.h> 22 #include <sound/soc.h> 23 #include <sound/soc-dapm.h> 24 #include <sound/tlv.h> 25 26 #include "tas6424.h" 27 28 /* Define how often to check (and clear) the fault status register (in ms) */ 29 #define TAS6424_FAULT_CHECK_INTERVAL 200 30 31 static const char * const tas6424_supply_names[] = { 32 "dvdd", /* Digital power supply. Connect to 3.3-V supply. */ 33 "vbat", /* Supply used for higher voltage analog circuits. */ 34 "pvdd", /* Class-D amp output FETs supply. */ 35 }; 36 #define TAS6424_NUM_SUPPLIES ARRAY_SIZE(tas6424_supply_names) 37 38 struct tas6424_data { 39 struct device *dev; 40 struct regmap *regmap; 41 struct regulator_bulk_data supplies[TAS6424_NUM_SUPPLIES]; 42 struct delayed_work fault_check_work; 43 unsigned int last_cfault; 44 unsigned int last_fault1; 45 unsigned int last_fault2; 46 unsigned int last_warn; 47 struct gpio_desc *standby_gpio; 48 struct gpio_desc *mute_gpio; 49 }; 50 51 /* 52 * DAC digital volumes. From -103.5 to 24 dB in 0.5 dB steps. Note that 53 * setting the gain below -100 dB (register value <0x7) is effectively a MUTE 54 * as per device datasheet. 55 */ 56 static DECLARE_TLV_DB_SCALE(dac_tlv, -10350, 50, 0); 57 58 static const struct snd_kcontrol_new tas6424_snd_controls[] = { 59 SOC_SINGLE_TLV("Speaker Driver CH1 Playback Volume", 60 TAS6424_CH1_VOL_CTRL, 0, 0xff, 0, dac_tlv), 61 SOC_SINGLE_TLV("Speaker Driver CH2 Playback Volume", 62 TAS6424_CH2_VOL_CTRL, 0, 0xff, 0, dac_tlv), 63 SOC_SINGLE_TLV("Speaker Driver CH3 Playback Volume", 64 TAS6424_CH3_VOL_CTRL, 0, 0xff, 0, dac_tlv), 65 SOC_SINGLE_TLV("Speaker Driver CH4 Playback Volume", 66 TAS6424_CH4_VOL_CTRL, 0, 0xff, 0, dac_tlv), 67 SOC_SINGLE_STROBE("Auto Diagnostics Switch", TAS6424_DC_DIAG_CTRL1, 68 TAS6424_LDGBYPASS_SHIFT, 1), 69 }; 70 71 static int tas6424_dac_event(struct snd_soc_dapm_widget *w, 72 struct snd_kcontrol *kcontrol, int event) 73 { 74 struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); 75 struct tas6424_data *tas6424 = snd_soc_component_get_drvdata(component); 76 77 dev_dbg(component->dev, "%s() event=0x%0x\n", __func__, event); 78 79 if (event & SND_SOC_DAPM_POST_PMU) { 80 /* Observe codec shutdown-to-active time */ 81 msleep(12); 82 83 /* Turn on TAS6424 periodic fault checking/handling */ 84 tas6424->last_fault1 = 0; 85 tas6424->last_fault2 = 0; 86 tas6424->last_warn = 0; 87 schedule_delayed_work(&tas6424->fault_check_work, 88 msecs_to_jiffies(TAS6424_FAULT_CHECK_INTERVAL)); 89 } else if (event & SND_SOC_DAPM_PRE_PMD) { 90 /* Disable TAS6424 periodic fault checking/handling */ 91 cancel_delayed_work_sync(&tas6424->fault_check_work); 92 } 93 94 return 0; 95 } 96 97 static const struct snd_soc_dapm_widget tas6424_dapm_widgets[] = { 98 SND_SOC_DAPM_AIF_IN("DAC IN", "Playback", 0, SND_SOC_NOPM, 0, 0), 99 SND_SOC_DAPM_DAC_E("DAC", NULL, SND_SOC_NOPM, 0, 0, tas6424_dac_event, 100 SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), 101 SND_SOC_DAPM_OUTPUT("OUT") 102 }; 103 104 static const struct snd_soc_dapm_route tas6424_audio_map[] = { 105 { "DAC", NULL, "DAC IN" }, 106 { "OUT", NULL, "DAC" }, 107 }; 108 109 static int tas6424_hw_params(struct snd_pcm_substream *substream, 110 struct snd_pcm_hw_params *params, 111 struct snd_soc_dai *dai) 112 { 113 struct snd_soc_component *component = dai->component; 114 unsigned int rate = params_rate(params); 115 unsigned int width = params_width(params); 116 u8 sap_ctrl = 0; 117 118 dev_dbg(component->dev, "%s() rate=%u width=%u\n", __func__, rate, width); 119 120 switch (rate) { 121 case 44100: 122 sap_ctrl |= TAS6424_SAP_RATE_44100; 123 break; 124 case 48000: 125 sap_ctrl |= TAS6424_SAP_RATE_48000; 126 break; 127 case 96000: 128 sap_ctrl |= TAS6424_SAP_RATE_96000; 129 break; 130 default: 131 dev_err(component->dev, "unsupported sample rate: %u\n", rate); 132 return -EINVAL; 133 } 134 135 switch (width) { 136 case 16: 137 sap_ctrl |= TAS6424_SAP_TDM_SLOT_SZ_16; 138 break; 139 case 24: 140 break; 141 default: 142 dev_err(component->dev, "unsupported sample width: %u\n", width); 143 return -EINVAL; 144 } 145 146 snd_soc_component_update_bits(component, TAS6424_SAP_CTRL, 147 TAS6424_SAP_RATE_MASK | 148 TAS6424_SAP_TDM_SLOT_SZ_16, 149 sap_ctrl); 150 151 return 0; 152 } 153 154 static int tas6424_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt) 155 { 156 struct snd_soc_component *component = dai->component; 157 u8 serial_format = 0; 158 159 dev_dbg(component->dev, "%s() fmt=0x%0x\n", __func__, fmt); 160 161 /* clock masters */ 162 switch (fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) { 163 case SND_SOC_DAIFMT_CBC_CFC: 164 break; 165 default: 166 dev_err(component->dev, "Invalid DAI clocking\n"); 167 return -EINVAL; 168 } 169 170 /* signal polarity */ 171 switch (fmt & SND_SOC_DAIFMT_INV_MASK) { 172 case SND_SOC_DAIFMT_NB_NF: 173 break; 174 default: 175 dev_err(component->dev, "Invalid DAI clock signal polarity\n"); 176 return -EINVAL; 177 } 178 179 /* interface format */ 180 switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { 181 case SND_SOC_DAIFMT_I2S: 182 serial_format |= TAS6424_SAP_I2S; 183 break; 184 case SND_SOC_DAIFMT_DSP_A: 185 serial_format |= TAS6424_SAP_DSP; 186 break; 187 case SND_SOC_DAIFMT_DSP_B: 188 /* 189 * We can use the fact that the TAS6424 does not care about the 190 * LRCLK duty cycle during TDM to receive DSP_B formatted data 191 * in LEFTJ mode (no delaying of the 1st data bit). 192 */ 193 serial_format |= TAS6424_SAP_LEFTJ; 194 break; 195 case SND_SOC_DAIFMT_LEFT_J: 196 serial_format |= TAS6424_SAP_LEFTJ; 197 break; 198 default: 199 dev_err(component->dev, "Invalid DAI interface format\n"); 200 return -EINVAL; 201 } 202 203 snd_soc_component_update_bits(component, TAS6424_SAP_CTRL, 204 TAS6424_SAP_FMT_MASK, serial_format); 205 206 return 0; 207 } 208 209 static int tas6424_set_dai_tdm_slot(struct snd_soc_dai *dai, 210 unsigned int tx_mask, unsigned int rx_mask, 211 int slots, int slot_width) 212 { 213 struct snd_soc_component *component = dai->component; 214 unsigned int first_slot, last_slot; 215 bool sap_tdm_slot_last; 216 217 dev_dbg(component->dev, "%s() tx_mask=%d rx_mask=%d\n", __func__, 218 tx_mask, rx_mask); 219 220 if (!tx_mask || !rx_mask) 221 return 0; /* nothing needed to disable TDM mode */ 222 223 /* 224 * Determine the first slot and last slot that is being requested so 225 * we'll be able to more easily enforce certain constraints as the 226 * TAS6424's TDM interface is not fully configurable. 227 */ 228 first_slot = __ffs(tx_mask); 229 last_slot = __fls(rx_mask); 230 231 if (last_slot - first_slot != 4) { 232 dev_err(component->dev, "tdm mask must cover 4 contiguous slots\n"); 233 return -EINVAL; 234 } 235 236 switch (first_slot) { 237 case 0: 238 sap_tdm_slot_last = false; 239 break; 240 case 4: 241 sap_tdm_slot_last = true; 242 break; 243 default: 244 dev_err(component->dev, "tdm mask must start at slot 0 or 4\n"); 245 return -EINVAL; 246 } 247 248 snd_soc_component_update_bits(component, TAS6424_SAP_CTRL, TAS6424_SAP_TDM_SLOT_LAST, 249 sap_tdm_slot_last ? TAS6424_SAP_TDM_SLOT_LAST : 0); 250 251 return 0; 252 } 253 254 static int tas6424_mute(struct snd_soc_dai *dai, int mute, int direction) 255 { 256 struct snd_soc_component *component = dai->component; 257 struct tas6424_data *tas6424 = snd_soc_component_get_drvdata(component); 258 unsigned int val; 259 260 dev_dbg(component->dev, "%s() mute=%d\n", __func__, mute); 261 262 if (tas6424->mute_gpio) { 263 gpiod_set_value_cansleep(tas6424->mute_gpio, mute); 264 return 0; 265 } 266 267 if (mute) 268 val = TAS6424_ALL_STATE_MUTE; 269 else 270 val = TAS6424_ALL_STATE_PLAY; 271 272 snd_soc_component_write(component, TAS6424_CH_STATE_CTRL, val); 273 274 return 0; 275 } 276 277 static int tas6424_power_off(struct snd_soc_component *component) 278 { 279 struct tas6424_data *tas6424 = snd_soc_component_get_drvdata(component); 280 int ret; 281 282 snd_soc_component_write(component, TAS6424_CH_STATE_CTRL, TAS6424_ALL_STATE_HIZ); 283 284 regcache_cache_only(tas6424->regmap, true); 285 regcache_mark_dirty(tas6424->regmap); 286 287 ret = regulator_bulk_disable(ARRAY_SIZE(tas6424->supplies), 288 tas6424->supplies); 289 if (ret < 0) { 290 dev_err(component->dev, "failed to disable supplies: %d\n", ret); 291 return ret; 292 } 293 294 return 0; 295 } 296 297 static int tas6424_power_on(struct snd_soc_component *component) 298 { 299 struct tas6424_data *tas6424 = snd_soc_component_get_drvdata(component); 300 int ret; 301 u8 chan_states; 302 int no_auto_diags = 0; 303 unsigned int reg_val; 304 305 if (!regmap_read(tas6424->regmap, TAS6424_DC_DIAG_CTRL1, ®_val)) 306 no_auto_diags = reg_val & TAS6424_LDGBYPASS_MASK; 307 308 ret = regulator_bulk_enable(ARRAY_SIZE(tas6424->supplies), 309 tas6424->supplies); 310 if (ret < 0) { 311 dev_err(component->dev, "failed to enable supplies: %d\n", ret); 312 return ret; 313 } 314 315 regcache_cache_only(tas6424->regmap, false); 316 317 ret = regcache_sync(tas6424->regmap); 318 if (ret < 0) { 319 dev_err(component->dev, "failed to sync regcache: %d\n", ret); 320 return ret; 321 } 322 323 if (tas6424->mute_gpio) { 324 gpiod_set_value_cansleep(tas6424->mute_gpio, 0); 325 /* 326 * channels are muted via the mute pin. Don't also mute 327 * them via the registers so that subsequent register 328 * access is not necessary to un-mute the channels 329 */ 330 chan_states = TAS6424_ALL_STATE_PLAY; 331 } else { 332 chan_states = TAS6424_ALL_STATE_MUTE; 333 } 334 snd_soc_component_write(component, TAS6424_CH_STATE_CTRL, chan_states); 335 336 /* any time we come out of HIZ, the output channels automatically run DC 337 * load diagnostics if autodiagnotics are enabled. wait here until this 338 * completes. 339 */ 340 if (!no_auto_diags) 341 msleep(230); 342 343 return 0; 344 } 345 346 static int tas6424_set_bias_level(struct snd_soc_component *component, 347 enum snd_soc_bias_level level) 348 { 349 struct snd_soc_dapm_context *dapm = snd_soc_component_to_dapm(component); 350 351 dev_dbg(component->dev, "%s() level=%d\n", __func__, level); 352 353 switch (level) { 354 case SND_SOC_BIAS_ON: 355 case SND_SOC_BIAS_PREPARE: 356 break; 357 case SND_SOC_BIAS_STANDBY: 358 if (snd_soc_dapm_get_bias_level(dapm) == SND_SOC_BIAS_OFF) 359 tas6424_power_on(component); 360 break; 361 case SND_SOC_BIAS_OFF: 362 tas6424_power_off(component); 363 break; 364 } 365 366 return 0; 367 } 368 369 static const struct snd_soc_component_driver soc_codec_dev_tas6424 = { 370 .set_bias_level = tas6424_set_bias_level, 371 .controls = tas6424_snd_controls, 372 .num_controls = ARRAY_SIZE(tas6424_snd_controls), 373 .dapm_widgets = tas6424_dapm_widgets, 374 .num_dapm_widgets = ARRAY_SIZE(tas6424_dapm_widgets), 375 .dapm_routes = tas6424_audio_map, 376 .num_dapm_routes = ARRAY_SIZE(tas6424_audio_map), 377 .use_pmdown_time = 1, 378 .endianness = 1, 379 }; 380 381 static const struct snd_soc_dai_ops tas6424_speaker_dai_ops = { 382 .hw_params = tas6424_hw_params, 383 .set_fmt = tas6424_set_dai_fmt, 384 .set_tdm_slot = tas6424_set_dai_tdm_slot, 385 .mute_stream = tas6424_mute, 386 .no_capture_mute = 1, 387 }; 388 389 static struct snd_soc_dai_driver tas6424_dai[] = { 390 { 391 .name = "tas6424-amplifier", 392 .playback = { 393 .stream_name = "Playback", 394 .channels_min = 1, 395 .channels_max = 4, 396 .rates = TAS6424_RATES, 397 .formats = TAS6424_FORMATS, 398 }, 399 .ops = &tas6424_speaker_dai_ops, 400 }, 401 }; 402 403 static void tas6424_fault_check_work(struct work_struct *work) 404 { 405 struct tas6424_data *tas6424 = container_of(work, struct tas6424_data, 406 fault_check_work.work); 407 struct device *dev = tas6424->dev; 408 unsigned int reg; 409 int ret; 410 411 ret = regmap_read(tas6424->regmap, TAS6424_CHANNEL_FAULT, ®); 412 if (ret < 0) { 413 dev_err(dev, "failed to read CHANNEL_FAULT register: %d\n", ret); 414 goto out; 415 } 416 417 if (!reg) { 418 tas6424->last_cfault = reg; 419 goto check_global_fault1_reg; 420 } 421 422 /* 423 * Only flag errors once for a given occurrence. This is needed as 424 * the TAS6424 will take time clearing the fault condition internally 425 * during which we don't want to bombard the system with the same 426 * error message over and over. 427 */ 428 if ((reg & TAS6424_FAULT_OC_CH1) && !(tas6424->last_cfault & TAS6424_FAULT_OC_CH1)) 429 dev_crit(dev, "experienced a channel 1 overcurrent fault\n"); 430 431 if ((reg & TAS6424_FAULT_OC_CH2) && !(tas6424->last_cfault & TAS6424_FAULT_OC_CH2)) 432 dev_crit(dev, "experienced a channel 2 overcurrent fault\n"); 433 434 if ((reg & TAS6424_FAULT_OC_CH3) && !(tas6424->last_cfault & TAS6424_FAULT_OC_CH3)) 435 dev_crit(dev, "experienced a channel 3 overcurrent fault\n"); 436 437 if ((reg & TAS6424_FAULT_OC_CH4) && !(tas6424->last_cfault & TAS6424_FAULT_OC_CH4)) 438 dev_crit(dev, "experienced a channel 4 overcurrent fault\n"); 439 440 if ((reg & TAS6424_FAULT_DC_CH1) && !(tas6424->last_cfault & TAS6424_FAULT_DC_CH1)) 441 dev_crit(dev, "experienced a channel 1 DC fault\n"); 442 443 if ((reg & TAS6424_FAULT_DC_CH2) && !(tas6424->last_cfault & TAS6424_FAULT_DC_CH2)) 444 dev_crit(dev, "experienced a channel 2 DC fault\n"); 445 446 if ((reg & TAS6424_FAULT_DC_CH3) && !(tas6424->last_cfault & TAS6424_FAULT_DC_CH3)) 447 dev_crit(dev, "experienced a channel 3 DC fault\n"); 448 449 if ((reg & TAS6424_FAULT_DC_CH4) && !(tas6424->last_cfault & TAS6424_FAULT_DC_CH4)) 450 dev_crit(dev, "experienced a channel 4 DC fault\n"); 451 452 /* Store current fault1 value so we can detect any changes next time */ 453 tas6424->last_cfault = reg; 454 455 check_global_fault1_reg: 456 ret = regmap_read(tas6424->regmap, TAS6424_GLOB_FAULT1, ®); 457 if (ret < 0) { 458 dev_err(dev, "failed to read GLOB_FAULT1 register: %d\n", ret); 459 goto out; 460 } 461 462 /* 463 * Ignore any clock faults as there is no clean way to check for them. 464 * We would need to start checking for those faults *after* the SAIF 465 * stream has been setup, and stop checking *before* the stream is 466 * stopped to avoid any false-positives. However there are no 467 * appropriate hooks to monitor these events. 468 */ 469 reg &= TAS6424_FAULT_PVDD_OV | 470 TAS6424_FAULT_VBAT_OV | 471 TAS6424_FAULT_PVDD_UV | 472 TAS6424_FAULT_VBAT_UV; 473 474 if (!reg) { 475 tas6424->last_fault1 = reg; 476 goto check_global_fault2_reg; 477 } 478 479 if ((reg & TAS6424_FAULT_PVDD_OV) && !(tas6424->last_fault1 & TAS6424_FAULT_PVDD_OV)) 480 dev_crit(dev, "experienced a PVDD overvoltage fault\n"); 481 482 if ((reg & TAS6424_FAULT_VBAT_OV) && !(tas6424->last_fault1 & TAS6424_FAULT_VBAT_OV)) 483 dev_crit(dev, "experienced a VBAT overvoltage fault\n"); 484 485 if ((reg & TAS6424_FAULT_PVDD_UV) && !(tas6424->last_fault1 & TAS6424_FAULT_PVDD_UV)) 486 dev_crit(dev, "experienced a PVDD undervoltage fault\n"); 487 488 if ((reg & TAS6424_FAULT_VBAT_UV) && !(tas6424->last_fault1 & TAS6424_FAULT_VBAT_UV)) 489 dev_crit(dev, "experienced a VBAT undervoltage fault\n"); 490 491 /* Store current fault1 value so we can detect any changes next time */ 492 tas6424->last_fault1 = reg; 493 494 check_global_fault2_reg: 495 ret = regmap_read(tas6424->regmap, TAS6424_GLOB_FAULT2, ®); 496 if (ret < 0) { 497 dev_err(dev, "failed to read GLOB_FAULT2 register: %d\n", ret); 498 goto out; 499 } 500 501 reg &= TAS6424_FAULT_OTSD | 502 TAS6424_FAULT_OTSD_CH1 | 503 TAS6424_FAULT_OTSD_CH2 | 504 TAS6424_FAULT_OTSD_CH3 | 505 TAS6424_FAULT_OTSD_CH4; 506 507 if (!reg) { 508 tas6424->last_fault2 = reg; 509 goto check_warn_reg; 510 } 511 512 if ((reg & TAS6424_FAULT_OTSD) && !(tas6424->last_fault2 & TAS6424_FAULT_OTSD)) 513 dev_crit(dev, "experienced a global overtemp shutdown\n"); 514 515 if ((reg & TAS6424_FAULT_OTSD_CH1) && !(tas6424->last_fault2 & TAS6424_FAULT_OTSD_CH1)) 516 dev_crit(dev, "experienced an overtemp shutdown on CH1\n"); 517 518 if ((reg & TAS6424_FAULT_OTSD_CH2) && !(tas6424->last_fault2 & TAS6424_FAULT_OTSD_CH2)) 519 dev_crit(dev, "experienced an overtemp shutdown on CH2\n"); 520 521 if ((reg & TAS6424_FAULT_OTSD_CH3) && !(tas6424->last_fault2 & TAS6424_FAULT_OTSD_CH3)) 522 dev_crit(dev, "experienced an overtemp shutdown on CH3\n"); 523 524 if ((reg & TAS6424_FAULT_OTSD_CH4) && !(tas6424->last_fault2 & TAS6424_FAULT_OTSD_CH4)) 525 dev_crit(dev, "experienced an overtemp shutdown on CH4\n"); 526 527 /* Store current fault2 value so we can detect any changes next time */ 528 tas6424->last_fault2 = reg; 529 530 check_warn_reg: 531 ret = regmap_read(tas6424->regmap, TAS6424_WARN, ®); 532 if (ret < 0) { 533 dev_err(dev, "failed to read WARN register: %d\n", ret); 534 goto out; 535 } 536 537 reg &= TAS6424_WARN_VDD_UV | 538 TAS6424_WARN_VDD_POR | 539 TAS6424_WARN_VDD_OTW | 540 TAS6424_WARN_VDD_OTW_CH1 | 541 TAS6424_WARN_VDD_OTW_CH2 | 542 TAS6424_WARN_VDD_OTW_CH3 | 543 TAS6424_WARN_VDD_OTW_CH4; 544 545 if (!reg) { 546 tas6424->last_warn = reg; 547 goto out; 548 } 549 550 if ((reg & TAS6424_WARN_VDD_UV) && !(tas6424->last_warn & TAS6424_WARN_VDD_UV)) 551 dev_warn(dev, "experienced a VDD under voltage condition\n"); 552 553 if ((reg & TAS6424_WARN_VDD_POR) && !(tas6424->last_warn & TAS6424_WARN_VDD_POR)) 554 dev_warn(dev, "experienced a VDD POR condition\n"); 555 556 if ((reg & TAS6424_WARN_VDD_OTW) && !(tas6424->last_warn & TAS6424_WARN_VDD_OTW)) 557 dev_warn(dev, "experienced a global overtemp warning\n"); 558 559 if ((reg & TAS6424_WARN_VDD_OTW_CH1) && !(tas6424->last_warn & TAS6424_WARN_VDD_OTW_CH1)) 560 dev_warn(dev, "experienced an overtemp warning on CH1\n"); 561 562 if ((reg & TAS6424_WARN_VDD_OTW_CH2) && !(tas6424->last_warn & TAS6424_WARN_VDD_OTW_CH2)) 563 dev_warn(dev, "experienced an overtemp warning on CH2\n"); 564 565 if ((reg & TAS6424_WARN_VDD_OTW_CH3) && !(tas6424->last_warn & TAS6424_WARN_VDD_OTW_CH3)) 566 dev_warn(dev, "experienced an overtemp warning on CH3\n"); 567 568 if ((reg & TAS6424_WARN_VDD_OTW_CH4) && !(tas6424->last_warn & TAS6424_WARN_VDD_OTW_CH4)) 569 dev_warn(dev, "experienced an overtemp warning on CH4\n"); 570 571 /* Store current warn value so we can detect any changes next time */ 572 tas6424->last_warn = reg; 573 574 /* Clear any warnings by toggling the CLEAR_FAULT control bit */ 575 ret = regmap_write_bits(tas6424->regmap, TAS6424_MISC_CTRL3, 576 TAS6424_CLEAR_FAULT, TAS6424_CLEAR_FAULT); 577 if (ret < 0) 578 dev_err(dev, "failed to write MISC_CTRL3 register: %d\n", ret); 579 580 ret = regmap_write_bits(tas6424->regmap, TAS6424_MISC_CTRL3, 581 TAS6424_CLEAR_FAULT, 0); 582 if (ret < 0) 583 dev_err(dev, "failed to write MISC_CTRL3 register: %d\n", ret); 584 585 out: 586 /* Schedule the next fault check at the specified interval */ 587 schedule_delayed_work(&tas6424->fault_check_work, 588 msecs_to_jiffies(TAS6424_FAULT_CHECK_INTERVAL)); 589 } 590 591 static const struct reg_default tas6424_reg_defaults[] = { 592 { TAS6424_MODE_CTRL, 0x00 }, 593 { TAS6424_MISC_CTRL1, 0x32 }, 594 { TAS6424_MISC_CTRL2, 0x62 }, 595 { TAS6424_SAP_CTRL, 0x04 }, 596 { TAS6424_CH_STATE_CTRL, 0x55 }, 597 { TAS6424_CH1_VOL_CTRL, 0xcf }, 598 { TAS6424_CH2_VOL_CTRL, 0xcf }, 599 { TAS6424_CH3_VOL_CTRL, 0xcf }, 600 { TAS6424_CH4_VOL_CTRL, 0xcf }, 601 { TAS6424_DC_DIAG_CTRL1, 0x00 }, 602 { TAS6424_DC_DIAG_CTRL2, 0x11 }, 603 { TAS6424_DC_DIAG_CTRL3, 0x11 }, 604 { TAS6424_PIN_CTRL, 0xff }, 605 { TAS6424_AC_DIAG_CTRL1, 0x00 }, 606 { TAS6424_MISC_CTRL3, 0x00 }, 607 { TAS6424_CLIP_CTRL, 0x01 }, 608 { TAS6424_CLIP_WINDOW, 0x14 }, 609 { TAS6424_CLIP_WARN, 0x00 }, 610 { TAS6424_CBC_STAT, 0x00 }, 611 { TAS6424_MISC_CTRL4, 0x40 }, 612 }; 613 614 static bool tas6424_is_writable_reg(struct device *dev, unsigned int reg) 615 { 616 switch (reg) { 617 case TAS6424_MODE_CTRL: 618 case TAS6424_MISC_CTRL1: 619 case TAS6424_MISC_CTRL2: 620 case TAS6424_SAP_CTRL: 621 case TAS6424_CH_STATE_CTRL: 622 case TAS6424_CH1_VOL_CTRL: 623 case TAS6424_CH2_VOL_CTRL: 624 case TAS6424_CH3_VOL_CTRL: 625 case TAS6424_CH4_VOL_CTRL: 626 case TAS6424_DC_DIAG_CTRL1: 627 case TAS6424_DC_DIAG_CTRL2: 628 case TAS6424_DC_DIAG_CTRL3: 629 case TAS6424_PIN_CTRL: 630 case TAS6424_AC_DIAG_CTRL1: 631 case TAS6424_MISC_CTRL3: 632 case TAS6424_CLIP_CTRL: 633 case TAS6424_CLIP_WINDOW: 634 case TAS6424_CLIP_WARN: 635 case TAS6424_CBC_STAT: 636 case TAS6424_MISC_CTRL4: 637 return true; 638 default: 639 return false; 640 } 641 } 642 643 static bool tas6424_is_volatile_reg(struct device *dev, unsigned int reg) 644 { 645 switch (reg) { 646 case TAS6424_DC_LOAD_DIAG_REP12: 647 case TAS6424_DC_LOAD_DIAG_REP34: 648 case TAS6424_DC_LOAD_DIAG_REPLO: 649 case TAS6424_CHANNEL_STATE: 650 case TAS6424_CHANNEL_FAULT: 651 case TAS6424_GLOB_FAULT1: 652 case TAS6424_GLOB_FAULT2: 653 case TAS6424_WARN: 654 case TAS6424_AC_LOAD_DIAG_REP1: 655 case TAS6424_AC_LOAD_DIAG_REP2: 656 case TAS6424_AC_LOAD_DIAG_REP3: 657 case TAS6424_AC_LOAD_DIAG_REP4: 658 return true; 659 default: 660 return false; 661 } 662 } 663 664 static const struct regmap_config tas6424_regmap_config = { 665 .reg_bits = 8, 666 .val_bits = 8, 667 668 .writeable_reg = tas6424_is_writable_reg, 669 .volatile_reg = tas6424_is_volatile_reg, 670 671 .max_register = TAS6424_MAX, 672 .reg_defaults = tas6424_reg_defaults, 673 .num_reg_defaults = ARRAY_SIZE(tas6424_reg_defaults), 674 .cache_type = REGCACHE_RBTREE, 675 }; 676 677 #if IS_ENABLED(CONFIG_OF) 678 static const struct of_device_id tas6424_of_ids[] = { 679 { .compatible = "ti,tas6424", }, 680 { }, 681 }; 682 MODULE_DEVICE_TABLE(of, tas6424_of_ids); 683 #endif 684 685 static int tas6424_i2c_probe(struct i2c_client *client) 686 { 687 struct device *dev = &client->dev; 688 struct tas6424_data *tas6424; 689 int ret; 690 int i; 691 692 tas6424 = devm_kzalloc(dev, sizeof(*tas6424), GFP_KERNEL); 693 if (!tas6424) 694 return -ENOMEM; 695 dev_set_drvdata(dev, tas6424); 696 697 tas6424->dev = dev; 698 699 tas6424->regmap = devm_regmap_init_i2c(client, &tas6424_regmap_config); 700 if (IS_ERR(tas6424->regmap)) { 701 ret = PTR_ERR(tas6424->regmap); 702 dev_err(dev, "unable to allocate register map: %d\n", ret); 703 return ret; 704 } 705 706 /* 707 * Get control of the standby pin and set it LOW to take the codec 708 * out of the stand-by mode. 709 * Note: The actual pin polarity is taken care of in the GPIO lib 710 * according the polarity specified in the DTS. 711 */ 712 tas6424->standby_gpio = devm_gpiod_get_optional(dev, "standby", 713 GPIOD_OUT_LOW); 714 if (IS_ERR(tas6424->standby_gpio)) { 715 if (PTR_ERR(tas6424->standby_gpio) == -EPROBE_DEFER) 716 return -EPROBE_DEFER; 717 dev_info(dev, "failed to get standby GPIO: %ld\n", 718 PTR_ERR(tas6424->standby_gpio)); 719 tas6424->standby_gpio = NULL; 720 } 721 722 /* 723 * Get control of the mute pin and set it HIGH in order to start with 724 * all the output muted. 725 * Note: The actual pin polarity is taken care of in the GPIO lib 726 * according the polarity specified in the DTS. 727 */ 728 tas6424->mute_gpio = devm_gpiod_get_optional(dev, "mute", 729 GPIOD_OUT_HIGH); 730 if (IS_ERR(tas6424->mute_gpio)) { 731 if (PTR_ERR(tas6424->mute_gpio) == -EPROBE_DEFER) 732 return -EPROBE_DEFER; 733 dev_info(dev, "failed to get nmute GPIO: %ld\n", 734 PTR_ERR(tas6424->mute_gpio)); 735 tas6424->mute_gpio = NULL; 736 } 737 738 for (i = 0; i < ARRAY_SIZE(tas6424->supplies); i++) 739 tas6424->supplies[i].supply = tas6424_supply_names[i]; 740 ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(tas6424->supplies), 741 tas6424->supplies); 742 if (ret) { 743 dev_err(dev, "unable to request supplies: %d\n", ret); 744 return ret; 745 } 746 747 ret = regulator_bulk_enable(ARRAY_SIZE(tas6424->supplies), 748 tas6424->supplies); 749 if (ret) { 750 dev_err(dev, "unable to enable supplies: %d\n", ret); 751 return ret; 752 } 753 754 /* Reset device to establish well-defined startup state */ 755 ret = regmap_update_bits(tas6424->regmap, TAS6424_MODE_CTRL, 756 TAS6424_RESET, TAS6424_RESET); 757 if (ret) { 758 dev_err(dev, "unable to reset device: %d\n", ret); 759 goto disable_regs; 760 } 761 762 INIT_DELAYED_WORK(&tas6424->fault_check_work, tas6424_fault_check_work); 763 764 ret = devm_snd_soc_register_component(dev, &soc_codec_dev_tas6424, 765 tas6424_dai, ARRAY_SIZE(tas6424_dai)); 766 if (ret < 0) { 767 dev_err(dev, "unable to register codec: %d\n", ret); 768 goto disable_regs; 769 } 770 771 return 0; 772 773 disable_regs: 774 regulator_bulk_disable(ARRAY_SIZE(tas6424->supplies), tas6424->supplies); 775 return ret; 776 } 777 778 static void tas6424_i2c_remove(struct i2c_client *client) 779 { 780 struct device *dev = &client->dev; 781 struct tas6424_data *tas6424 = dev_get_drvdata(dev); 782 int ret; 783 784 cancel_delayed_work_sync(&tas6424->fault_check_work); 785 786 /* put the codec in stand-by */ 787 if (tas6424->standby_gpio) 788 gpiod_set_value_cansleep(tas6424->standby_gpio, 1); 789 790 ret = regulator_bulk_disable(ARRAY_SIZE(tas6424->supplies), 791 tas6424->supplies); 792 if (ret < 0) 793 dev_err(dev, "unable to disable supplies: %d\n", ret); 794 } 795 796 static const struct i2c_device_id tas6424_i2c_ids[] = { 797 { "tas6424" }, 798 { } 799 }; 800 MODULE_DEVICE_TABLE(i2c, tas6424_i2c_ids); 801 802 static struct i2c_driver tas6424_i2c_driver = { 803 .driver = { 804 .name = "tas6424", 805 .of_match_table = of_match_ptr(tas6424_of_ids), 806 }, 807 .probe = tas6424_i2c_probe, 808 .remove = tas6424_i2c_remove, 809 .id_table = tas6424_i2c_ids, 810 }; 811 module_i2c_driver(tas6424_i2c_driver); 812 813 MODULE_AUTHOR("Andreas Dannenberg <dannenberg@ti.com>"); 814 MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>"); 815 MODULE_DESCRIPTION("TAS6424 Audio amplifier driver"); 816 MODULE_LICENSE("GPL v2"); 817