xref: /linux/sound/pci/lx6464es/lx_defs.h (revision 95298d63c67673c654c08952672d016212b26054)
1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /* -*- linux-c -*- *
3  *
4  * ALSA driver for the digigram lx6464es interface
5  * adapted upstream headers
6  *
7  * Copyright (c) 2009 Tim Blechmann <tim@klingt.org>
8  */
9 
10 #ifndef LX_DEFS_H
11 #define LX_DEFS_H
12 
13 /* code adapted from ethersound.h */
14 #define	XES_FREQ_COUNT8_MASK    0x00001FFF /* compteur 25MHz entre 8 ech. */
15 #define	XES_FREQ_COUNT8_44_MIN  0x00001288 /* 25M /
16 					    * [ 44k - ( 44.1k + 48k ) / 2 ]
17 					    * * 8 */
18 #define	XES_FREQ_COUNT8_44_MAX	0x000010F0 /* 25M / [ ( 44.1k + 48k ) / 2 ]
19 					    * * 8 */
20 #define	XES_FREQ_COUNT8_48_MAX	0x00000F08 /* 25M /
21 					    * [ 48k + ( 44.1k + 48k ) / 2 ]
22 					    * * 8 */
23 
24 /* code adapted from LXES_registers.h */
25 
26 #define IOCR_OUTPUTS_OFFSET 0	/* (rw) offset for the number of OUTs in the
27 				 * ConfES register. */
28 #define IOCR_INPUTS_OFFSET  8	/* (rw) offset for the number of INs in the
29 				 * ConfES register. */
30 #define FREQ_RATIO_OFFSET  19	/* (rw) offset for frequency ratio in the
31 				 * ConfES register. */
32 #define	FREQ_RATIO_SINGLE_MODE 0x01 /* value for single mode frequency ratio:
33 				     * sample rate = frequency rate. */
34 
35 #define CONFES_READ_PART_MASK	0x00070000
36 #define CONFES_WRITE_PART_MASK	0x00F80000
37 
38 /* code adapted from if_drv_mb.h */
39 
40 #define MASK_SYS_STATUS_ERROR	(1L << 31) /* events that lead to a PCI irq if
41 					    * not yet pending */
42 #define MASK_SYS_STATUS_URUN	(1L << 30)
43 #define MASK_SYS_STATUS_ORUN	(1L << 29)
44 #define MASK_SYS_STATUS_EOBO	(1L << 28)
45 #define MASK_SYS_STATUS_EOBI	(1L << 27)
46 #define MASK_SYS_STATUS_FREQ	(1L << 26)
47 #define MASK_SYS_STATUS_ESA	(1L << 25) /* reserved, this is set by the
48 					    * XES */
49 #define MASK_SYS_STATUS_TIMER	(1L << 24)
50 
51 #define MASK_SYS_ASYNC_EVENTS	(MASK_SYS_STATUS_ERROR |		\
52 				 MASK_SYS_STATUS_URUN  |		\
53 				 MASK_SYS_STATUS_ORUN  |		\
54 				 MASK_SYS_STATUS_EOBO  |		\
55 				 MASK_SYS_STATUS_EOBI  |		\
56 				 MASK_SYS_STATUS_FREQ  |		\
57 				 MASK_SYS_STATUS_ESA)
58 
59 #define MASK_SYS_PCI_EVENTS		(MASK_SYS_ASYNC_EVENTS |	\
60 					 MASK_SYS_STATUS_TIMER)
61 
62 #define MASK_SYS_TIMER_COUNT	0x0000FFFF
63 
64 #define MASK_SYS_STATUS_EOT_PLX		(1L << 22) /* event that remains
65 						    * internal: reserved fo end
66 						    * of plx dma */
67 #define MASK_SYS_STATUS_XES		(1L << 21) /* event that remains
68 						    * internal: pending XES
69 						    * IRQ */
70 #define MASK_SYS_STATUS_CMD_DONE	(1L << 20) /* alternate command
71 						    * management: notify driver
72 						    * instead of polling */
73 
74 
75 #define MAX_STREAM_BUFFER 5	/* max amount of stream buffers. */
76 
77 #define MICROBLAZE_IBL_MIN		 32
78 #define MICROBLAZE_IBL_DEFAULT	        128
79 #define MICROBLAZE_IBL_MAX		512
80 /* #define MASK_GRANULARITY		(2*MICROBLAZE_IBL_MAX-1) */
81 
82 
83 
84 /* command opcodes, see reference for details */
85 
86 /*
87  the capture bit position in the object_id field in driver commands
88  depends upon the number of managed channels. For now, 64 IN + 64 OUT are
89  supported. HOwever, the communication protocol forsees 1024 channels, hence
90  bit 10 indicates a capture (input) object).
91 */
92 #define ID_IS_CAPTURE (1L << 10)
93 #define ID_OFFSET	13	/* object ID is at the 13th bit in the
94 				 * 1st command word.*/
95 #define ID_CH_MASK    0x3F
96 #define OPCODE_OFFSET	24	/* offset of the command opcode in the first
97 				 * command word.*/
98 
99 enum cmd_mb_opcodes {
100 	CMD_00_INFO_DEBUG	        = 0x00,
101 	CMD_01_GET_SYS_CFG		= 0x01,
102 	CMD_02_SET_GRANULARITY		= 0x02,
103 	CMD_03_SET_TIMER_IRQ		= 0x03,
104 	CMD_04_GET_EVENT		= 0x04,
105 	CMD_05_GET_PIPES		= 0x05,
106 
107 	CMD_06_ALLOCATE_PIPE            = 0x06,
108 	CMD_07_RELEASE_PIPE		= 0x07,
109 	CMD_08_ASK_BUFFERS		= 0x08,
110 	CMD_09_STOP_PIPE		= 0x09,
111 	CMD_0A_GET_PIPE_SPL_COUNT	= 0x0a,
112 	CMD_0B_TOGGLE_PIPE_STATE	= 0x0b,
113 
114 	CMD_0C_DEF_STREAM		= 0x0c,
115 	CMD_0D_SET_MUTE			= 0x0d,
116 	CMD_0E_GET_STREAM_SPL_COUNT     = 0x0e,
117 	CMD_0F_UPDATE_BUFFER		= 0x0f,
118 	CMD_10_GET_BUFFER		= 0x10,
119 	CMD_11_CANCEL_BUFFER		= 0x11,
120 	CMD_12_GET_PEAK			= 0x12,
121 	CMD_13_SET_STREAM_STATE		= 0x13,
122 	CMD_14_INVALID			= 0x14,
123 };
124 
125 /* pipe states */
126 enum pipe_state_t {
127 	PSTATE_IDLE	= 0,	/* the pipe is not processed in the XES_IRQ
128 				 * (free or stopped, or paused). */
129 	PSTATE_RUN	= 1,	/* sustained play/record state. */
130 	PSTATE_PURGE	= 2,	/* the ES channels are now off, render pipes do
131 				 * not DMA, record pipe do a last DMA. */
132 	PSTATE_ACQUIRE	= 3,	/* the ES channels are now on, render pipes do
133 				 * not yet increase their sample count, record
134 				 * pipes do not DMA. */
135 	PSTATE_CLOSING	= 4,	/* the pipe is releasing, and may not yet
136 				 * receive an "alloc" command. */
137 };
138 
139 /* stream states */
140 enum stream_state_t {
141 	SSTATE_STOP	=  0x00,       /* setting to stop resets the stream spl
142 					* count.*/
143 	SSTATE_RUN	= (0x01 << 0), /* start DMA and spl count handling. */
144 	SSTATE_PAUSE	= (0x01 << 1), /* pause DMA and spl count handling. */
145 };
146 
147 /* buffer flags */
148 enum buffer_flags {
149 	BF_VALID	= 0x80,	/* set if the buffer is valid, clear if free.*/
150 	BF_CURRENT	= 0x40,	/* set if this is the current buffer (there is
151 				 * always a current buffer).*/
152 	BF_NOTIFY_EOB	= 0x20,	/* set if this buffer must cause a PCI event
153 				 * when finished.*/
154 	BF_CIRCULAR	= 0x10,	/* set if buffer[1] must be copied to buffer[0]
155 				 * by the end of this buffer.*/
156 	BF_64BITS_ADR	= 0x08,	/* set if the hi part of the address is valid.*/
157 	BF_xx		= 0x04,	/* future extension.*/
158 	BF_EOB		= 0x02,	/* set if finished, but not yet free.*/
159 	BF_PAUSE	= 0x01,	/* pause stream at buffer end.*/
160 	BF_ZERO		= 0x00,	/* no flags (init).*/
161 };
162 
163 /*
164 *	Stream Flags definitions
165 */
166 enum stream_flags {
167 	SF_ZERO		= 0x00000000, /* no flags (stream invalid). */
168 	SF_VALID	= 0x10000000, /* the stream has a valid DMA_conf
169 				       * info (setstreamformat). */
170 	SF_XRUN		= 0x20000000, /* the stream is un x-run state. */
171 	SF_START	= 0x40000000, /* the DMA is running.*/
172 	SF_ASIO		= 0x80000000, /* ASIO.*/
173 };
174 
175 
176 #define MASK_SPL_COUNT_HI 0x00FFFFFF /* 4 MSBits are status bits */
177 #define PSTATE_OFFSET             28 /* 4 MSBits are status bits */
178 
179 
180 #define MASK_STREAM_HAS_MAPPING	(1L << 12)
181 #define MASK_STREAM_IS_ASIO	(1L <<  9)
182 #define STREAM_FMT_OFFSET	10   /* the stream fmt bits start at the 10th
183 				      * bit in the command word. */
184 
185 #define STREAM_FMT_16b          0x02
186 #define STREAM_FMT_intel        0x01
187 
188 #define FREQ_FIELD_OFFSET	15  /* offset of the freq field in the response
189 				     * word */
190 
191 #define BUFF_FLAGS_OFFSET	  24 /*  offset of the buffer flags in the
192 				      *  response word. */
193 #define MASK_DATA_SIZE	  0x00FFFFFF /* this must match the field size of
194 				      * datasize in the buffer_t structure. */
195 
196 #define MASK_BUFFER_ID	        0xFF /* the cancel command awaits a buffer ID,
197 				      * may be 0xFF for "current". */
198 
199 
200 /* code adapted from PcxErr_e.h */
201 
202 /* Bits masks */
203 
204 #define ERROR_MASK              0x8000
205 
206 #define SOURCE_MASK             0x7800
207 
208 #define E_SOURCE_BOARD          0x4000 /* 8 >> 1 */
209 #define E_SOURCE_DRV            0x2000 /* 4 >> 1 */
210 #define E_SOURCE_API            0x1000 /* 2 >> 1 */
211 /* Error tools */
212 #define E_SOURCE_TOOLS          0x0800 /* 1 >> 1 */
213 /* Error pcxaudio */
214 #define E_SOURCE_AUDIO          0x1800 /* 3 >> 1 */
215 /* Error virtual pcx */
216 #define E_SOURCE_VPCX           0x2800 /* 5 >> 1 */
217 /* Error dispatcher */
218 #define E_SOURCE_DISPATCHER     0x3000 /* 6 >> 1 */
219 /* Error from CobraNet firmware */
220 #define E_SOURCE_COBRANET       0x3800 /* 7 >> 1 */
221 
222 #define E_SOURCE_USER           0x7800
223 
224 #define CLASS_MASK              0x0700
225 
226 #define CODE_MASK               0x00FF
227 
228 /* Bits values */
229 
230 /* Values for the error/warning bit */
231 #define ERROR_VALUE             0x8000
232 #define WARNING_VALUE           0x0000
233 
234 /* Class values */
235 #define E_CLASS_GENERAL                  0x0000
236 #define E_CLASS_INVALID_CMD              0x0100
237 #define E_CLASS_INVALID_STD_OBJECT       0x0200
238 #define E_CLASS_RSRC_IMPOSSIBLE          0x0300
239 #define E_CLASS_WRONG_CONTEXT            0x0400
240 #define E_CLASS_BAD_SPECIFIC_PARAMETER   0x0500
241 #define E_CLASS_REAL_TIME_ERROR          0x0600
242 #define E_CLASS_DIRECTSHOW               0x0700
243 #define E_CLASS_FREE                     0x0700
244 
245 
246 /* Complete DRV error code for the general class */
247 #define ED_GN           (ERROR_VALUE | E_SOURCE_DRV | E_CLASS_GENERAL)
248 #define ED_CONCURRENCY                  (ED_GN | 0x01)
249 #define ED_DSP_CRASHED                  (ED_GN | 0x02)
250 #define ED_UNKNOWN_BOARD                (ED_GN | 0x03)
251 #define ED_NOT_INSTALLED                (ED_GN | 0x04)
252 #define ED_CANNOT_OPEN_SVC_MANAGER      (ED_GN | 0x05)
253 #define ED_CANNOT_READ_REGISTRY         (ED_GN | 0x06)
254 #define ED_DSP_VERSION_MISMATCH         (ED_GN | 0x07)
255 #define ED_UNAVAILABLE_FEATURE          (ED_GN | 0x08)
256 #define ED_CANCELLED                    (ED_GN | 0x09)
257 #define ED_NO_RESPONSE_AT_IRQA          (ED_GN | 0x10)
258 #define ED_INVALID_ADDRESS              (ED_GN | 0x11)
259 #define ED_DSP_CORRUPTED                (ED_GN | 0x12)
260 #define ED_PENDING_OPERATION            (ED_GN | 0x13)
261 #define ED_NET_ALLOCATE_MEMORY_IMPOSSIBLE   (ED_GN | 0x14)
262 #define ED_NET_REGISTER_ERROR               (ED_GN | 0x15)
263 #define ED_NET_THREAD_ERROR                 (ED_GN | 0x16)
264 #define ED_NET_OPEN_ERROR                   (ED_GN | 0x17)
265 #define ED_NET_CLOSE_ERROR                  (ED_GN | 0x18)
266 #define ED_NET_NO_MORE_PACKET               (ED_GN | 0x19)
267 #define ED_NET_NO_MORE_BUFFER               (ED_GN | 0x1A)
268 #define ED_NET_SEND_ERROR                   (ED_GN | 0x1B)
269 #define ED_NET_RECEIVE_ERROR                (ED_GN | 0x1C)
270 #define ED_NET_WRONG_MSG_SIZE               (ED_GN | 0x1D)
271 #define ED_NET_WAIT_ERROR                   (ED_GN | 0x1E)
272 #define ED_NET_EEPROM_ERROR                 (ED_GN | 0x1F)
273 #define ED_INVALID_RS232_COM_NUMBER         (ED_GN | 0x20)
274 #define ED_INVALID_RS232_INIT               (ED_GN | 0x21)
275 #define ED_FILE_ERROR                       (ED_GN | 0x22)
276 #define ED_INVALID_GPIO_CMD                 (ED_GN | 0x23)
277 #define ED_RS232_ALREADY_OPENED             (ED_GN | 0x24)
278 #define ED_RS232_NOT_OPENED                 (ED_GN | 0x25)
279 #define ED_GPIO_ALREADY_OPENED              (ED_GN | 0x26)
280 #define ED_GPIO_NOT_OPENED                  (ED_GN | 0x27)
281 #define ED_REGISTRY_ERROR                   (ED_GN | 0x28) /* <- NCX */
282 #define ED_INVALID_SERVICE                  (ED_GN | 0x29) /* <- NCX */
283 
284 #define ED_READ_FILE_ALREADY_OPENED	    (ED_GN | 0x2a) /* <- Decalage
285 							    * pour RCX
286 							    * (old 0x28)
287 							    * */
288 #define ED_READ_FILE_INVALID_COMMAND	    (ED_GN | 0x2b) /* ~ */
289 #define ED_READ_FILE_INVALID_PARAMETER	    (ED_GN | 0x2c) /* ~ */
290 #define ED_READ_FILE_ALREADY_CLOSED	    (ED_GN | 0x2d) /* ~ */
291 #define ED_READ_FILE_NO_INFORMATION	    (ED_GN | 0x2e) /* ~ */
292 #define ED_READ_FILE_INVALID_HANDLE	    (ED_GN | 0x2f) /* ~ */
293 #define ED_READ_FILE_END_OF_FILE	    (ED_GN | 0x30) /* ~ */
294 #define ED_READ_FILE_ERROR	            (ED_GN | 0x31) /* ~ */
295 
296 #define ED_DSP_CRASHED_EXC_DSPSTACK_OVERFLOW (ED_GN | 0x32) /* <- Decalage pour
297 							     * PCX (old 0x14) */
298 #define ED_DSP_CRASHED_EXC_SYSSTACK_OVERFLOW (ED_GN | 0x33) /* ~ */
299 #define ED_DSP_CRASHED_EXC_ILLEGAL           (ED_GN | 0x34) /* ~ */
300 #define ED_DSP_CRASHED_EXC_TIMER_REENTRY     (ED_GN | 0x35) /* ~ */
301 #define ED_DSP_CRASHED_EXC_FATAL_ERROR       (ED_GN | 0x36) /* ~ */
302 
303 #define ED_FLASH_PCCARD_NOT_PRESENT          (ED_GN | 0x37)
304 
305 #define ED_NO_CURRENT_CLOCK                  (ED_GN | 0x38)
306 
307 /* Complete DRV error code for real time class */
308 #define ED_RT           (ERROR_VALUE | E_SOURCE_DRV | E_CLASS_REAL_TIME_ERROR)
309 #define ED_DSP_TIMED_OUT                (ED_RT | 0x01)
310 #define ED_DSP_CHK_TIMED_OUT            (ED_RT | 0x02)
311 #define ED_STREAM_OVERRUN               (ED_RT | 0x03)
312 #define ED_DSP_BUSY                     (ED_RT | 0x04)
313 #define ED_DSP_SEMAPHORE_TIME_OUT       (ED_RT | 0x05)
314 #define ED_BOARD_TIME_OUT               (ED_RT | 0x06)
315 #define ED_XILINX_ERROR                 (ED_RT | 0x07)
316 #define ED_COBRANET_ITF_NOT_RESPONDING  (ED_RT | 0x08)
317 
318 /* Complete BOARD error code for the invaid standard object class */
319 #define EB_ISO          (ERROR_VALUE | E_SOURCE_BOARD | \
320 			 E_CLASS_INVALID_STD_OBJECT)
321 #define EB_INVALID_EFFECT               (EB_ISO | 0x00)
322 #define EB_INVALID_PIPE                 (EB_ISO | 0x40)
323 #define EB_INVALID_STREAM               (EB_ISO | 0x80)
324 #define EB_INVALID_AUDIO                (EB_ISO | 0xC0)
325 
326 /* Complete BOARD error code for impossible resource allocation class */
327 #define EB_RI           (ERROR_VALUE | E_SOURCE_BOARD | E_CLASS_RSRC_IMPOSSIBLE)
328 #define EB_ALLOCATE_ALL_STREAM_TRANSFERT_BUFFERS_IMPOSSIBLE (EB_RI | 0x01)
329 #define EB_ALLOCATE_PIPE_SAMPLE_BUFFER_IMPOSSIBLE           (EB_RI | 0x02)
330 
331 #define EB_ALLOCATE_MEM_STREAM_IMPOSSIBLE		\
332 	EB_ALLOCATE_ALL_STREAM_TRANSFERT_BUFFERS_IMPOSSIBLE
333 #define EB_ALLOCATE_MEM_PIPE_IMPOSSIBLE			\
334 	EB_ALLOCATE_PIPE_SAMPLE_BUFFER_IMPOSSIBLE
335 
336 #define EB_ALLOCATE_DIFFERED_CMD_IMPOSSIBLE     (EB_RI | 0x03)
337 #define EB_TOO_MANY_DIFFERED_CMD                (EB_RI | 0x04)
338 #define EB_RBUFFERS_TABLE_OVERFLOW              (EB_RI | 0x05)
339 #define EB_ALLOCATE_EFFECTS_IMPOSSIBLE          (EB_RI | 0x08)
340 #define EB_ALLOCATE_EFFECT_POS_IMPOSSIBLE       (EB_RI | 0x09)
341 #define EB_RBUFFER_NOT_AVAILABLE                (EB_RI | 0x0A)
342 #define EB_ALLOCATE_CONTEXT_LIII_IMPOSSIBLE     (EB_RI | 0x0B)
343 #define EB_STATUS_DIALOG_IMPOSSIBLE             (EB_RI | 0x1D)
344 #define EB_CONTROL_CMD_IMPOSSIBLE               (EB_RI | 0x1E)
345 #define EB_STATUS_SEND_IMPOSSIBLE               (EB_RI | 0x1F)
346 #define EB_ALLOCATE_PIPE_IMPOSSIBLE             (EB_RI | 0x40)
347 #define EB_ALLOCATE_STREAM_IMPOSSIBLE           (EB_RI | 0x80)
348 #define EB_ALLOCATE_AUDIO_IMPOSSIBLE            (EB_RI | 0xC0)
349 
350 /* Complete BOARD error code for wrong call context class */
351 #define EB_WCC          (ERROR_VALUE | E_SOURCE_BOARD | E_CLASS_WRONG_CONTEXT)
352 #define EB_CMD_REFUSED                  (EB_WCC | 0x00)
353 #define EB_START_STREAM_REFUSED         (EB_WCC | 0xFC)
354 #define EB_SPC_REFUSED                  (EB_WCC | 0xFD)
355 #define EB_CSN_REFUSED                  (EB_WCC | 0xFE)
356 #define EB_CSE_REFUSED                  (EB_WCC | 0xFF)
357 
358 
359 
360 
361 #endif /* LX_DEFS_H */
362