1 /**************************************************************************** 2 3 Copyright Echo Digital Audio Corporation (c) 1998 - 2004 4 All rights reserved 5 www.echoaudio.com 6 7 This file is part of Echo Digital Audio's generic driver library. 8 9 Echo Digital Audio's generic driver library is free software; 10 you can redistribute it and/or modify it under the terms of 11 the GNU General Public License as published by the Free Software Foundation. 12 13 This program is distributed in the hope that it will be useful, 14 but WITHOUT ANY WARRANTY; without even the implied warranty of 15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 GNU General Public License for more details. 17 18 You should have received a copy of the GNU General Public License 19 along with this program; if not, write to the Free Software 20 Foundation, Inc., 59 Temple Place - Suite 330, Boston, 21 MA 02111-1307, USA. 22 23 ************************************************************************* 24 25 Translation from C++ and adaptation for use in ALSA-Driver 26 were made by Giuliano Pochini <pochini@shiny.it> 27 28 ****************************************************************************/ 29 30 31 static int write_control_reg(struct echoaudio *chip, u32 value, char force); 32 static int set_input_clock(struct echoaudio *chip, u16 clock); 33 static int set_professional_spdif(struct echoaudio *chip, char prof); 34 static int set_digital_mode(struct echoaudio *chip, u8 mode); 35 static int load_asic_generic(struct echoaudio *chip, u32 cmd, short asic); 36 static int check_asic_status(struct echoaudio *chip); 37 38 39 static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id) 40 { 41 int err; 42 43 if (snd_BUG_ON((subdevice_id & 0xfff0) != LAYLA24)) 44 return -ENODEV; 45 46 err = init_dsp_comm_page(chip); 47 if (err) { 48 dev_err(chip->card->dev, 49 "init_hw - could not initialize DSP comm page\n"); 50 return err; 51 } 52 53 chip->device_id = device_id; 54 chip->subdevice_id = subdevice_id; 55 chip->bad_board = true; 56 chip->has_midi = true; 57 chip->dsp_code_to_load = FW_LAYLA24_DSP; 58 chip->input_clock_types = 59 ECHO_CLOCK_BIT_INTERNAL | ECHO_CLOCK_BIT_SPDIF | 60 ECHO_CLOCK_BIT_WORD | ECHO_CLOCK_BIT_ADAT; 61 chip->digital_modes = 62 ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_RCA | 63 ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_OPTICAL | 64 ECHOCAPS_HAS_DIGITAL_MODE_ADAT; 65 66 err = load_firmware(chip); 67 if (err < 0) 68 return err; 69 chip->bad_board = false; 70 71 err = init_line_levels(chip); 72 if (err < 0) 73 return err; 74 75 return err; 76 } 77 78 79 80 static int set_mixer_defaults(struct echoaudio *chip) 81 { 82 chip->digital_mode = DIGITAL_MODE_SPDIF_RCA; 83 chip->professional_spdif = false; 84 chip->digital_in_automute = true; 85 return init_line_levels(chip); 86 } 87 88 89 90 static u32 detect_input_clocks(const struct echoaudio *chip) 91 { 92 u32 clocks_from_dsp, clock_bits; 93 94 /* Map the DSP clock detect bits to the generic driver clock detect bits */ 95 clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks); 96 97 clock_bits = ECHO_CLOCK_BIT_INTERNAL; 98 99 if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_SPDIF) 100 clock_bits |= ECHO_CLOCK_BIT_SPDIF; 101 102 if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_ADAT) 103 clock_bits |= ECHO_CLOCK_BIT_ADAT; 104 105 if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_WORD) 106 clock_bits |= ECHO_CLOCK_BIT_WORD; 107 108 return clock_bits; 109 } 110 111 112 113 /* Layla24 has an ASIC on the PCI card and another ASIC in the external box; 114 both need to be loaded. */ 115 static int load_asic(struct echoaudio *chip) 116 { 117 int err; 118 119 if (chip->asic_loaded) 120 return 1; 121 122 123 /* Give the DSP a few milliseconds to settle down */ 124 mdelay(10); 125 126 /* Load the ASIC for the PCI card */ 127 err = load_asic_generic(chip, DSP_FNC_LOAD_LAYLA24_PCI_CARD_ASIC, 128 FW_LAYLA24_1_ASIC); 129 if (err < 0) 130 return err; 131 132 chip->asic_code = FW_LAYLA24_2S_ASIC; 133 134 /* Now give the new ASIC a little time to set up */ 135 mdelay(10); 136 137 /* Do the external one */ 138 err = load_asic_generic(chip, DSP_FNC_LOAD_LAYLA24_EXTERNAL_ASIC, 139 FW_LAYLA24_2S_ASIC); 140 if (err < 0) 141 return err; 142 143 /* Now give the external ASIC a little time to set up */ 144 mdelay(10); 145 146 /* See if it worked */ 147 err = check_asic_status(chip); 148 149 /* Set up the control register if the load succeeded - 150 48 kHz, internal clock, S/PDIF RCA mode */ 151 if (!err) 152 err = write_control_reg(chip, GML_CONVERTER_ENABLE | GML_48KHZ, 153 true); 154 155 return err; 156 } 157 158 159 160 static int set_sample_rate(struct echoaudio *chip, u32 rate) 161 { 162 u32 control_reg, clock, base_rate; 163 164 if (snd_BUG_ON(rate >= 50000 && 165 chip->digital_mode == DIGITAL_MODE_ADAT)) 166 return -EINVAL; 167 168 /* Only set the clock for internal mode. */ 169 if (chip->input_clock != ECHO_CLOCK_INTERNAL) { 170 dev_warn(chip->card->dev, 171 "Cannot set sample rate - clock not set to CLK_CLOCKININTERNAL\n"); 172 /* Save the rate anyhow */ 173 chip->comm_page->sample_rate = cpu_to_le32(rate); 174 chip->sample_rate = rate; 175 return 0; 176 } 177 178 /* Get the control register & clear the appropriate bits */ 179 control_reg = le32_to_cpu(chip->comm_page->control_register); 180 control_reg &= GML_CLOCK_CLEAR_MASK & GML_SPDIF_RATE_CLEAR_MASK; 181 182 clock = 0; 183 184 switch (rate) { 185 case 96000: 186 clock = GML_96KHZ; 187 break; 188 case 88200: 189 clock = GML_88KHZ; 190 break; 191 case 48000: 192 clock = GML_48KHZ | GML_SPDIF_SAMPLE_RATE1; 193 break; 194 case 44100: 195 clock = GML_44KHZ; 196 /* Professional mode */ 197 if (control_reg & GML_SPDIF_PRO_MODE) 198 clock |= GML_SPDIF_SAMPLE_RATE0; 199 break; 200 case 32000: 201 clock = GML_32KHZ | GML_SPDIF_SAMPLE_RATE0 | 202 GML_SPDIF_SAMPLE_RATE1; 203 break; 204 case 22050: 205 clock = GML_22KHZ; 206 break; 207 case 16000: 208 clock = GML_16KHZ; 209 break; 210 case 11025: 211 clock = GML_11KHZ; 212 break; 213 case 8000: 214 clock = GML_8KHZ; 215 break; 216 default: 217 /* If this is a non-standard rate, then the driver needs to 218 use Layla24's special "continuous frequency" mode */ 219 clock = LAYLA24_CONTINUOUS_CLOCK; 220 if (rate > 50000) { 221 base_rate = rate >> 1; 222 control_reg |= GML_DOUBLE_SPEED_MODE; 223 } else { 224 base_rate = rate; 225 } 226 227 if (base_rate < 25000) 228 base_rate = 25000; 229 230 if (wait_handshake(chip)) 231 return -EIO; 232 233 chip->comm_page->sample_rate = 234 cpu_to_le32(LAYLA24_MAGIC_NUMBER / base_rate - 2); 235 236 clear_handshake(chip); 237 send_vector(chip, DSP_VC_SET_LAYLA24_FREQUENCY_REG); 238 } 239 240 control_reg |= clock; 241 242 chip->comm_page->sample_rate = cpu_to_le32(rate); /* ignored by the DSP ? */ 243 chip->sample_rate = rate; 244 dev_dbg(chip->card->dev, 245 "set_sample_rate: %d clock %d\n", rate, control_reg); 246 247 return write_control_reg(chip, control_reg, false); 248 } 249 250 251 252 static int set_input_clock(struct echoaudio *chip, u16 clock) 253 { 254 u32 control_reg, clocks_from_dsp; 255 256 /* Mask off the clock select bits */ 257 control_reg = le32_to_cpu(chip->comm_page->control_register) & 258 GML_CLOCK_CLEAR_MASK; 259 clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks); 260 261 /* Pick the new clock */ 262 switch (clock) { 263 case ECHO_CLOCK_INTERNAL: 264 chip->input_clock = ECHO_CLOCK_INTERNAL; 265 return set_sample_rate(chip, chip->sample_rate); 266 case ECHO_CLOCK_SPDIF: 267 if (chip->digital_mode == DIGITAL_MODE_ADAT) 268 return -EAGAIN; 269 control_reg |= GML_SPDIF_CLOCK; 270 /* Layla24 doesn't support 96KHz S/PDIF */ 271 control_reg &= ~GML_DOUBLE_SPEED_MODE; 272 break; 273 case ECHO_CLOCK_WORD: 274 control_reg |= GML_WORD_CLOCK; 275 if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_WORD96) 276 control_reg |= GML_DOUBLE_SPEED_MODE; 277 else 278 control_reg &= ~GML_DOUBLE_SPEED_MODE; 279 break; 280 case ECHO_CLOCK_ADAT: 281 if (chip->digital_mode != DIGITAL_MODE_ADAT) 282 return -EAGAIN; 283 control_reg |= GML_ADAT_CLOCK; 284 control_reg &= ~GML_DOUBLE_SPEED_MODE; 285 break; 286 default: 287 dev_err(chip->card->dev, 288 "Input clock 0x%x not supported for Layla24\n", clock); 289 return -EINVAL; 290 } 291 292 chip->input_clock = clock; 293 return write_control_reg(chip, control_reg, true); 294 } 295 296 297 298 /* Depending on what digital mode you want, Layla24 needs different ASICs 299 loaded. This function checks the ASIC needed for the new mode and sees 300 if it matches the one already loaded. */ 301 static int switch_asic(struct echoaudio *chip, short asic) 302 { 303 s8 *monitors; 304 305 /* Check to see if this is already loaded */ 306 if (asic != chip->asic_code) { 307 monitors = kmemdup(chip->comm_page->monitors, 308 MONITOR_ARRAY_SIZE, GFP_KERNEL); 309 if (! monitors) 310 return -ENOMEM; 311 312 memset(chip->comm_page->monitors, ECHOGAIN_MUTED, 313 MONITOR_ARRAY_SIZE); 314 315 /* Load the desired ASIC */ 316 if (load_asic_generic(chip, DSP_FNC_LOAD_LAYLA24_EXTERNAL_ASIC, 317 asic) < 0) { 318 memcpy(chip->comm_page->monitors, monitors, 319 MONITOR_ARRAY_SIZE); 320 kfree(monitors); 321 return -EIO; 322 } 323 chip->asic_code = asic; 324 memcpy(chip->comm_page->monitors, monitors, MONITOR_ARRAY_SIZE); 325 kfree(monitors); 326 } 327 328 return 0; 329 } 330 331 332 333 static int dsp_set_digital_mode(struct echoaudio *chip, u8 mode) 334 { 335 u32 control_reg; 336 int err, incompatible_clock; 337 short asic; 338 339 /* Set clock to "internal" if it's not compatible with the new mode */ 340 incompatible_clock = false; 341 switch (mode) { 342 case DIGITAL_MODE_SPDIF_OPTICAL: 343 case DIGITAL_MODE_SPDIF_RCA: 344 if (chip->input_clock == ECHO_CLOCK_ADAT) 345 incompatible_clock = true; 346 asic = FW_LAYLA24_2S_ASIC; 347 break; 348 case DIGITAL_MODE_ADAT: 349 if (chip->input_clock == ECHO_CLOCK_SPDIF) 350 incompatible_clock = true; 351 asic = FW_LAYLA24_2A_ASIC; 352 break; 353 default: 354 dev_err(chip->card->dev, 355 "Digital mode not supported: %d\n", mode); 356 return -EINVAL; 357 } 358 359 if (incompatible_clock) { /* Switch to 48KHz, internal */ 360 chip->sample_rate = 48000; 361 spin_lock_irq(&chip->lock); 362 set_input_clock(chip, ECHO_CLOCK_INTERNAL); 363 spin_unlock_irq(&chip->lock); 364 } 365 366 /* switch_asic() can sleep */ 367 if (switch_asic(chip, asic) < 0) 368 return -EIO; 369 370 spin_lock_irq(&chip->lock); 371 372 /* Tweak the control register */ 373 control_reg = le32_to_cpu(chip->comm_page->control_register); 374 control_reg &= GML_DIGITAL_MODE_CLEAR_MASK; 375 376 switch (mode) { 377 case DIGITAL_MODE_SPDIF_OPTICAL: 378 control_reg |= GML_SPDIF_OPTICAL_MODE; 379 break; 380 case DIGITAL_MODE_SPDIF_RCA: 381 /* GML_SPDIF_OPTICAL_MODE bit cleared */ 382 break; 383 case DIGITAL_MODE_ADAT: 384 control_reg |= GML_ADAT_MODE; 385 control_reg &= ~GML_DOUBLE_SPEED_MODE; 386 break; 387 } 388 389 err = write_control_reg(chip, control_reg, true); 390 spin_unlock_irq(&chip->lock); 391 if (err < 0) 392 return err; 393 chip->digital_mode = mode; 394 395 dev_dbg(chip->card->dev, "set_digital_mode to %d\n", mode); 396 return incompatible_clock; 397 } 398